They don’t always draw down evenly. They have got firmware issues. I have 2 DP’s, 4 EB’s and 2 smart gens. Ecoflow really need to get it together. You can’t trust the state of charge you see on the screens. Have you tried to reset the BMS by turning off the unit and pressing hand holding the on button for 20 seconds then let it sit over night. Then top them off afterward.
Thank you for your video, I run into this with the Delta 2 + Delta 2 Max EB combination The procedure of draining both batteries helped and it took about 3 tries. I agree with you, I also use Renogy 220w bifacial panels in series to recharge my system and work well.
Best way to get it works best letting it run down to a higher charge limit Say 10% once main battery reaches that it will start to drain the extra battery to 10%
Thanks for video just got the same natures generator. I already have panels and will have to figure out those wind and solar connectors. Hope i can find those connectors.
Ty very much buddy. I have the delta 2 with the 2048 max battery. Ive noticed the battery indicator on the delta 2 isnt showing up suddenly. I updated firmware and still same. Im draining the delta 2 no mains to see if the extra battery kicks in once the delta 2 gets to 1%. Fingers crossed 🤞
It can but you would need a lot more of them. Wind turbine are really just supplement power. The mainstream will always come from steady solar and storage it. 😊
They don’t always draw down evenly. They have got firmware issues. I have 2 DP’s, 4 EB’s and 2 smart gens. Ecoflow really need to get it together. You can’t trust the state of charge you see on the screens. Have you tried to reset the BMS by turning off the unit and pressing hand holding the on button for 20 seconds then let it sit over night. Then top them off afterward.
Thank you for your video, I run into this with the Delta 2 + Delta 2 Max EB combination
The procedure of draining both batteries helped and it took about 3 tries.
I agree with you, I also use Renogy 220w bifacial panels in series to recharge my system and work well.
Thanks for this video. I'm having the same issue. Currently, I'm on cycle 1 of draining to 0 and charging back to 100%.
Best way to get it works best letting it run down to a higher charge limit
Say 10% once main battery reaches that it will start to drain the extra battery to 10%
Thanks for video just got the same natures generator. I already have panels and will have to figure out those wind and solar connectors. Hope i can find those connectors.
Ty very much buddy.
I have the delta 2 with the 2048 max battery. Ive noticed the battery indicator on the delta 2 isnt showing up suddenly. I updated firmware and still same. Im draining the delta 2 no mains to see if the extra battery kicks in once the delta 2 gets to 1%.
Fingers crossed 🤞
honestly i don't think the draw rate needs to be equal. It won't be more efficient really. If it bothers you though, i get it.
Is it ok to stack the extra battery on top of ecoflow pro.
Thanks for reply.
Seems okay so far and sturdy enough. I saw this person do it here: www.storagereview.com/review/ecoflow-whole-home-backup-power-solution-review
Eco flow told me NO
Can the windmill take up any slack?? b
It can but you would need a lot more of them. Wind turbine are really just supplement power. The mainstream will always come from steady solar and storage it. 😊
Happening to mine too….
After draining them both to zero, and doing a full 100% charge. I can say they are discharging relatively even to ~2% difference.