The Channels like yours is doing Arrma and all of us the favor so you deserve the free truck. Thank for being one of the Channels that actual puts these vehicles through it’s paces and doesn’t just put put around with it. Arrma, this Channel is awesome!
I think they will listen to Channels like yours especially if they see what you’re doing and that you know what you’re talking about. Keep growing the Channel💪🏻
Check out the east tactics mega fan video. It will almost make your outcast hoover a few inches off the ground, lol. It is the tires on the MAXX that have too much sidewall flex causing it to swerve all over the place when going over 25 mph. I put the Proline Badlands and the Trenchers on my MAXX and it solved that issue. It now runs on rails and goes straight as an arrow.
Now that’s a nice running spot wow, I like those sand hills. Hmm both trucks have their problems. I really don’t know which I like better. I sway to Traxxas because the parts support is better here 🇨🇦 but Arrma stuff is great too. Hopefully these manufacturers take a note on channels like yours and others, the real testers in my opinion. You drive like I do. And you speak your words no pushed or paid for. So we get a real life review and opinion. Thanks Guy.
Omg bri this video no joke made my day. Im sorry about your misfortune but your reaction and response to that tyre coming off was classic bro far out made me laugh hard, love ur stuff man ur a legend, thank you!!
I Love the hill climbs and the coming down from the mountain at Diamond Dust .. well.. until.. I expected to hear "You Picked A fine Time to Leave Me.. Loose Wheel" music , Man .. Sorry for all the bad luck on getting some rips in without issues.. The Wife is Green Wiccan, I am going to ask her to do some chants to try and improve your luck
That's why I always clean re grease my bearings every 4th to 5th pack.... 💯👍🏻😉 They seize up and make the problem worse... Overall awesome bash Guy...💯🚀💪🛻
Brother tell me about it, in 2016 I got a VXL Rustler, that thing broke left and right yes I was kind of a newbie but I had to put a butt ton of money into it so it wouldn't fail and then in 2018 somebody told me about the V3 Arrma Talion that just came out and I never looked back don't get me wrong I'm sure they're good rigs nowadays but I just can't go back to plastic chassis
Damn that all sucks! They'll be days like this 😆 I'm preaching to the choir! Ah man, keep smiling. My last short bash day was esc motor lead (my outstanding solder connection decided to retire for the day) about 5 minutes in with a crowd watching
Reliability seems to be a major issue on this 'new and improved" stunt truck. Do you think it's due to yours being a pre-production model? Does Traxxas have these same problems?
Watching that tires roll right pass you … priceless 😂🤣😂 looks like shop talk time 🤷♂️🤷♂️🤷♂️ get the sledge … would like to hear your point of view on it and suggestions 👍👍👍got mine and been my to go RC love it…
@@rcguygarage one lost a hand and one lost a leg maybe make it stronger like that guy Jaxx with all metal arms. LOL u need to get a rope so u can GRAB THEM & and say “GET OVER HERE”
That’s gotta suck. 2 trucks down, 1 bash😂. Hopefully the Outcast will be pretty solid with the fix. It just looks so good when it’s fixed. It just looks so dang good when it’s jumping. I guess trashbag now has a friend. 😂. Great video as always!
@@rcguygarage the outcast is still an overall beast when I say arms I mean it just as a preference. Not just material but design for replacement ✌️I still scream armma tough!
@@rcguygarage I was watching this without headphones. My wife said “why’s he so angry??” 😂😂😂 Don’t think she knows many folks from your neck of the woods hahaha. Told her you were just expressive 😜🤣
A real world video, this is RCing like we all know it. I'm glad I never got the Maxx. The 4s Arrmas are proving to be a way better truck when they are running.
I can honestly say that Maxx V-2 is a monster i like how it got up that hill my truck never broken. Big snow ice jumps in the winter skateboard park bashing no lie I can't wait for it to break so I can upgrade it like I do all my Rc Trucks & cars with arrma bad bearing problems right out the box brand new I'm going to stay with traxas for my RC monster trucks Great video.
ProTek RC 35x35x10mm Aluminum High Speed HV Cooling Fan (Silver/Black) Part#: PTK-2113. I have on my 6s's's🤣 and work great. 2xs on the Typhon as I have a 28 tooth pinion and 38 tooth spool. Vroom vroom.🤙
There’s the same fans on amazon for super cheap delta fans. I had to buy a bunch to find the tough ones. But if you want to messenger message we could figure something out. 🤘😎
Thank rc car garage arrma his fun reviews got me to pick up 2 big rocks in last 2 weeks. Ime currently shopping for my next bigger basher ime watching his reviews for best one for my usage with my son. You can also pat yourselves on the back any rc that can handle my 17 yer old is built tough. The big rocks passed his test😱🤣👍
Ps if in south Jersey check out rc car world this shop is top notch . Been buying from there for yrs. Great stock and owner support support you local hobby shops . We need them.
If that was a Redcat that hit those rocks...You would have broken the front and rear A-arms..LOL You rock my bro, good stuff. The best on the tube. Funny story we've all had those dog days and its above 103 degrees in the Dallas area. So my piece of crap father when I'm like I don't know maybe 18 years old. He's a dead beat that had a car lot. It's like year 1999 so he gives me this super small 1907's ish 2 door piece of junk. When I leave his lot to go back to school I hear I feel a wobble..I call him he's like it's nothing. Let me tell you, when cars passed me on the freeway the car just rocked and cabbage patched! LOL So all the sudden the driver's front end on the left just... I hear this huge CRASH..I'm on the freeway, so cars are zooming by me, I was in the middle lane. All the sudden I'm seeing sparks from axle on concrete over the hood! lol and at the last moment like in slow motion, my freekin wheel is hopping beside me, I'm staring thru the drivers window at it as I slowed down..bro it took off! OUT OF SIGHT!!!!!! Needless to say, our relationship didn't workout..but when i saw that wheel...I had to give you a good laugh..LOL Tomorrow is a new day to bash.
@@rcguygarage Instead of the pin and lock ring, find a 3mm screw and lock nut and put it through. Just have to make sure the nut and head of the screw dont interfere with anything when its spinning. I know i had to order small lock nuts when I put the 4s center brace on my big rock
@@nicksdroid63 yes I get you in the repair video that I did on this I was going to go that route but it didn't work out I didn't have the correct size that I felt comfortable with and I am still trying to give this thing a shot factory stock without that type of modification yet for me I would consider that a hack mod which is a positive thing because they work but in this testing process I didn't want to go outside of that box too much until Arma sends me the revised part which I believe is on the way as a mysterious tracking number showed up in my mailbox the other day
@@rcguygarage 🤣 Mystery tracking. might want to have it tested for covid when it gets there. I just had my wife print out 36x24 exploded diagrams of the Big Rock and the 4S V1 because Im sick of looking through a god damn magnifying glass at part numbahs
Can u do an arrma outcast v2 vs Arrma Notorious 6s v5 since they're currently the same price? I wanna know if I'm gonna regret my decision for buying the Notorious lol
You must have banged the wheel on the maxx running on the street with your son I’ve put my v2 though hell it loves it toughest rc I own without a doubt
What do you want the fan connection to be like? Hard to imagine a better fan that GC, so probably just need to figure out a better connector. Awesome blast, guy! Diamond dust looks like an amazing playground!
If I ever get an arrma I'm driving straight into a metal post I'd never do that to a Traxxas I'm going to tell the real truth about arrma they have a bunch of playing everything their arrmas screws are never tight people are lying when they say they're the best cars well this is also RUclips they're doing things for views in the real world people don't really go that hard on the cars they're doing it for the video. My local hobby shop only has two arrmas and they've been sitting there for over 2 years they sell about two traxxas's daily people love traxxas's arrmas are for the trash
Great video, love/jealous of the location. What's this pin issue? Eager to get a Kraton 4s v2 but ended up selling my Sledge once I realised how many issues it had, do you think it might be the same here? My Big Rock v3 was bulletproof.
No but that depends upon how abusive you are 😂🤣 you just got to remember to buy the right vehicle for the type of driving you're doing that's all sometimes and don't expect too much from something without upgrades. The V2 for me I can only speak on the outcast is my favorite vehicle in a 4S platform
@@rcguygarage Thanks. Similar driving style to you, don't abuse my cars Talbot-style and then expect them to live. But man the Sledge was plagued by QC issues big time, and different (IMHO) to design flaws in general. They totally pretended the O-ring and center diff issues were fictional. I mean, FFS...
@@lukebaines7785 I missed the pin issue question. That was resolved as I had a preproduction model. The thing is as near to perfection as you can get knowing nothing lasts forever or is perfect.
Because if it was crushed diamonds it's a fairly destructive material it gets in everywhere because it's dust I believe it has crushed Mica dust with it which creates that sparkle
Upgrades for my Maxx V2 include the V2 Revo aluminum stub axles and nuts, metal driveshafts, Max 8, a roll cage, GPM spur gear cover, and GPM motor mount. My only problem now is that the lower and upper bulkheads in the front and rear crack with time and big 20ft plus jumps. I didn't mess with those plastic hubs for long either. I have Traxxas aluminum front and rear hubs and c hubs. So yeah, I have like $1k into the damn V2 Maxx to make it durable enough! 😂. Hopefully you get that driveshaft issue fixed with the V2 Outcast 4s.
@@rcguygarage around $1k! Yeah I know I know. But I can throw the V2 Maxx around and not care how it lands. My 6yr old son beat the crap out of it at a construction site with zero damage. 😂
My 1:10 Outcast threw a wheel, and the nut was still totally there. WTF? It had so much torque that it destroyed the plastic wheel. I'm currently spending $100 a week on repair parts for that thing, but damn it rips. You have failed to convince me that I should be running Traxxas instead. lol
It is the tires. From the vids I've watched of people running them, wether on pavement or dirt, it does sway like the Xmaxx on stock tires. They run the same way on the Hoss which is the one that originally came with sledgehammers. The only way to stop it as much ,if you wanted it to run straight, was to up TSM. I think the Sledge is probably the best rc on sledgehammers. Now Traxxas does gear their stuff in more for off road to toss around in cornes and flip rotation as proof with the Xmaxx tires and now the sledgehammers. Arrma let's you run pretty straight on road and off, even with tire ballooning. And to me the best tire on all but 2 6s Arrma RCs are the backflips. Perfect for the Outcast/Notorious, of course, the Kraton and Fireteam.
wtf is diamond dust? that spot looks amazing. wish i had a spot like that near me. i mean i am 5 mins from mass but i dont think theres anything like that around here.
These should be popular everyone always torn between the two . I bought the v2 Maxx bc arrma didn't release thier version. Which one do you prefer or you not teady make that determination
To be quite honest with you after running multiple packs through both in question they both have positives and negatives I will say I am leaning towards one 🤫
My max kept doing the same thing when I ran it in any kind of dirt.. definitely thinking about getting the new 4s armma recently bought the TLR Typhon which is my second RC! Love your vids and information about RC!
The video ive been waiting for im stuck between both including the Granite idk what to pick i do like the Maxx V2 cause i want a mini maxx since i have the Xmaxx and i do like the monster truck look but i like the Outcast its a wheelie beast 🤷🏻♂️…The edits are hilarious 😂….get outta hea im walkin hea!! I hate that my rear dog bone popped out lost it first 5 minutes of driving my 4tec -_-
@@rcguygarage hmm the local hobby shop has the V1 on a clearance sale it’s pretty good deal. I have been eye balling it they have 3 orange ones left that’s it then no more V1 Maxx’s. I sold my Xmaxx so it might be an appropriate down size buy lol.
I'm still glad I got the V1 as I got to enjoy it sooner and prefer easier flipping being slightly shorter in length than V2. I still would have modded it anyway. I have proline 3.8" belted badland tires,8990 light kit,2085x servo, 8996X steel shafts with their alumium splined hubs and nuts and HR racing bellcrank. But even right out of the box the V1 was a very solid overall MT IMO and the toughest I've had so far. I also had the original e-maxx back in the day
I've had good luck with my 6s exb, first rc I bought in February this year. Now I have almost 20 trucks n cars. Only thing I've broke on my exb was wing screws come out. My worst purchase so far has been the vorteks 3s, they should have recalled it lol
Sorry to remind you... But YOU had to say it.... YOU went and jinxed yourself when you said "Diamond dust is the rc car killer." But that sucks; both cars are dead. What happened to the Maxx?? Did it break when it hit the outcropping at the top of hill? It looks like the tire got completely shredded off at the knuckle. That's bad. Well, at least you'll have somethings to wrench on in your next live feed of covid and coffee. Bash on, Guy. lol
The Channels like yours is doing Arrma and all of us the favor so you deserve the free truck.
Thank for being one of the Channels that actual puts these vehicles through it’s paces and doesn’t just put put around with it.
Arrma, this Channel is awesome!
WOW😂🤣 now only if they were listening to THE PEOPLE😳🤪😜
A YEAR LATER...AFTER SOME USE. IS TRAXXAS OR ARRMA MADE BETTER?@@rcguygarage
@@BOOSTEDLASER They both equally have their strengths and weaknesses. How's that for a vanilla answer 🤣😂🤣😂
IT WAS A NON ANSWER HEH@@rcguygarage
WHATS WEAK ABOUT THE ARRMA?
@@rcguygarage
Guy i have a mAXX v2 and have had no issues like that Mine had taken a beating with no issues
That's AWESOME to hear👍💯
I think they will listen to Channels like yours especially if they see what you’re doing and that you know what you’re talking about.
Keep growing the Channel💪🏻
👍💯🙏
Dude I'm having so much fun watching the videos man thank you man cuz I needed to pick up they kicking it and stay 😎🏁💯👍🍟🍔🗽
Check out the east tactics mega fan video. It will almost make your outcast hoover a few inches off the ground, lol. It is the tires on the MAXX that have too much sidewall flex causing it to swerve all over the place when going over 25 mph. I put the Proline Badlands and the Trenchers on my MAXX and it solved that issue. It now runs on rails and goes straight as an arrow.
Now that’s a nice running spot wow, I like those sand hills. Hmm both trucks have their problems. I really don’t know which I like better. I sway to Traxxas because the parts support is better here 🇨🇦 but Arrma stuff is great too. Hopefully these manufacturers take a note on channels like yours and others, the real testers in my opinion. You drive like I do. And you speak your words no pushed or paid for. So we get a real life review and opinion. Thanks Guy.
Wow👍💯 thank you for that end part👍💯
@@rcguygarage no problem 🇨🇦🍻 well deserved.
Omg bri this video no joke made my day. Im sorry about your misfortune but your reaction and response to that tyre coming off was classic bro far out made me laugh hard, love ur stuff man ur a legend, thank you!!
I'm still trying to work out how the tyre delayed it decent down the hill it's like it was on pause or something, very strange wonder what caused it..
Bugger mate! That's a lot of bad bloody luck! That place has a voodoo curse mate! Stay away! LOL. Loved the sand climb!
Which one would you buy, which one is more fun and which one is more durable
I Love the hill climbs and the coming down from the mountain at Diamond Dust .. well.. until.. I expected to hear "You Picked A fine Time to Leave Me.. Loose Wheel" music , Man .. Sorry for all the bad luck on getting some rips in without issues.. The Wife is Green Wiccan, I am going to ask her to do some chants to try and improve your luck
NICE!!!👍💯👊
Guy if you still have the maga hd slider axles bought for the bigrock. The plastic cover things might fit ?
Just a thought?
And from a Florida man to a northern man I sure would love to bash with you bro
THAT'S WHY YOUR GATOR 👍💯
Would have been a great time to sing Another one bites the dust!
That's why I always clean re grease my bearings every 4th to 5th pack.... 💯👍🏻😉 They seize up and make the problem worse... Overall awesome bash Guy...💯🚀💪🛻
How many packs do you believe went through each vehicle that's the question 😂🤣
Right...😂😂🤣🤣
We would be like that Hank Williams Jr song, Country Boy Can Survive, he was talking about he had a best friend that was a Yankee, 😆
Brother tell me about it, in 2016 I got a VXL Rustler, that thing broke left and right yes I was kind of a newbie but I had to put a butt ton of money into it so it wouldn't fail and then in 2018 somebody told me about the V3 Arrma Talion that just came out and I never looked back don't get me wrong I'm sure they're good rigs nowadays but I just can't go back to plastic chassis
Omg funny an loved the battery n not one pack sticka floating across the screen
Damn that all sucks! They'll be days like this 😆 I'm preaching to the choir! Ah man, keep smiling. My last short bash day was esc motor lead (my outstanding solder connection decided to retire for the day) about 5 minutes in with a crowd watching
Oh DANG that's tough
Very nice video did you sell any good buggy second hand but like the new Asuga XLR or 30 degrees north electric or Arma buggy 6s-8s?
The Outcast sure preforms well. It sure looks cool as it spits out sand going up the hill. ⭐⭐⭐⭐⭐
Reliability seems to be a major issue on this 'new and improved" stunt truck. Do you think it's due to yours being a pre-production model? Does Traxxas have these same problems?
Yes and yes to a certain degree
Watching that tires roll right pass you … priceless 😂🤣😂 looks like shop talk time 🤷♂️🤷♂️🤷♂️ get the sledge … would like to hear your point of view on it and suggestions 👍👍👍got mine and been my to go RC love it…
Finish HIM LoL. Great video
DANG guy it FINISHED ITSELF🤣😂
@@rcguygarage one lost a hand and one lost a leg maybe make it stronger like that guy Jaxx with all metal arms. LOL u need to get a rope so u can GRAB THEM & and say “GET OVER HERE”
I put the belted Katar's on my Maxx. Hell of a difference.
Not a good day at the diamond factory guy. That be a great place for a Vorza 6s
Bad luck at Diamond Dust. The RC KILLER!💥💥💥
Best news I seen in long time throughing Traxxas junk out is good news
“All jokes aside, that little black blob that’s the wheel” FUCKIN TOOK ME OUT 😂💀
How well are you liking the SKYRC speed monitoring device?
That’s gotta suck. 2 trucks down, 1 bash😂.
Hopefully the Outcast will be pretty solid with the fix. It just looks so good when it’s fixed. It just looks so dang good when it’s jumping.
I guess trashbag now has a friend. 😂.
Great video as always!
Trash bag has a smaller cellmate 😂🤣😂🤣
Maxx need metal driveshafts. Outcast 4s need better pin hold down, Guess all 4s need some fix from manufacturer on those driveshafts.😂
I think it’s just a matter of chassis, good plastic always takes more of a kickin that being said for me the difference is the traxxas a arms 👍
Yeah? 🧐Even with those two boulder hits with the Arrma? 🤔 Interesting
@@rcguygarage the outcast is still an overall beast when I say arms I mean it just as a preference. Not just material but design for replacement ✌️I still scream armma tough!
Which do you think is more durable?
UDR Time! It’s a better truck than either of those other two 👊🏼
It surely is different
@@rcguygarage I was watching this without headphones.
My wife said “why’s he so angry??” 😂😂😂
Don’t think she knows many folks from your neck of the woods hahaha. Told her you were just expressive 😜🤣
This one is a good comment for sure 🤣😂🤣😂
A real world video, this is RCing like we all know it. I'm glad I never got the Maxx. The 4s Arrmas are proving to be a way better truck when they are running.
What??? What did you say??…lol
Can’t hear you over that jet engine…lol
Awesome vid
I can honestly say that Maxx V-2 is a monster i like how it got up that hill my truck never broken. Big snow ice jumps in the winter skateboard park bashing no lie I can't wait for it to break so I can upgrade it like I do all my Rc Trucks & cars with arrma bad bearing problems right out the box brand new I'm going to stay with traxas for my RC monster trucks Great video.
At least you’ll have something to do back at the workbench. 😆
🤣😂
How many runs on that Maxx? Stuff always breaks eventually. It's just a matter of how long it lasts before it breaks.
3 or 4 of you count the on road speed test
Traxxas tough baby
You left out TWO WORDS "not so" 🤣😂
ProTek RC 35x35x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)
Part#: PTK-2113. I have on my 6s's's🤣 and work great. 2xs on the Typhon as I have a 28 tooth pinion and 38 tooth spool. Vroom vroom.🤙
Wow! Finally found someone who drives like me 😂 all that tumbling looks like my v1 🤣 Even with the upgrades, imma keep my v1
There’s the same fans on amazon for super cheap delta fans. I had to buy a bunch to find the tough ones. But if you want to messenger message we could figure something out. 🤘😎
Thank rc car garage arrma his fun reviews got me to pick up 2 big rocks in last 2 weeks. Ime currently shopping for my next bigger basher ime watching his reviews for best one for my usage with my son. You can also pat yourselves on the back any rc that can handle my 17 yer old is built tough. The big rocks passed his test😱🤣👍
Them
Ps if in south Jersey check out rc car world this shop is top notch . Been buying from there for yrs. Great stock and owner support support you local hobby shops . We need them.
I have the OG Maxx and it's been bullit proof and a lot of fun!
I snapped the driveshafts on my maxx 6 or 7 times before stumping up the cash for the steel cvds. Frustrating
But he died so he had to spit some beachnut in that dude's eyes 😆
It is not the fault off the rc cars. It is the playground man.😂😂
👍💯👊
On my first run that's what happened to my kraton 4s so l put nut and bolt 🔩 😒 no ring the shafts are junk
I can't wait to get mine now 😆 with the changes made
Isn’t this a great hobby! LOL. Most of the time we’re pissed at our cars. I hope Diamond Dust isn’t too far from home.
🤫It's in my back yard guy 👍
@@rcguygarage Well that’s friggin awesome!
Powerhobbys make a nice twin fan cool colors
If that was a Redcat that hit those rocks...You would have broken the front and rear A-arms..LOL You rock my bro, good stuff. The best on the tube. Funny story we've all had those dog days and its above 103 degrees in the Dallas area. So my piece of crap father when I'm like I don't know maybe 18 years old. He's a dead beat that had a car lot. It's like year 1999 so he gives me this super small 1907's ish 2 door piece of junk. When I leave his lot to go back to school I hear I feel a wobble..I call him he's like it's nothing. Let me tell you, when cars passed me on the freeway the car just rocked and cabbage patched! LOL So all the sudden the driver's front end on the left just... I hear this huge CRASH..I'm on the freeway, so cars are zooming by me, I was in the middle lane. All the sudden I'm seeing sparks from axle on concrete over the hood! lol and at the last moment like in slow motion, my freekin wheel is hopping beside me, I'm staring thru the drivers window at it as I slowed down..bro it took off! OUT OF SIGHT!!!!!! Needless to say, our relationship didn't workout..but when i saw that wheel...I had to give you a good laugh..LOL Tomorrow is a new day to bash.
HOLY CRAP luck was oh your side for at least a little bit that day
Bolt and lock nut?
?
@@rcguygarage Instead of the pin and lock ring, find a 3mm screw and lock nut and put it through. Just have to make sure the nut and head of the screw dont interfere with anything when its spinning. I know i had to order small lock nuts when I put the 4s center brace on my big rock
@@nicksdroid63 yes I get you in the repair video that I did on this I was going to go that route but it didn't work out I didn't have the correct size that I felt comfortable with and I am still trying to give this thing a shot factory stock without that type of modification yet for me I would consider that a hack mod which is a positive thing because they work but in this testing process I didn't want to go outside of that box too much until Arma sends me the revised part which I believe is on the way as a mysterious tracking number showed up in my mailbox the other day
@@rcguygarage 🤣 Mystery tracking. might want to have it tested for covid when it gets there. I just had my wife print out 36x24 exploded diagrams of the Big Rock and the 4S V1 because Im sick of looking through a god damn magnifying glass at part numbahs
That was funny!! Tactical Nuke!!! How did the wheel come off? It looked like the whole end of the axle came off with it?
It did! It my experience is a weak point with the Traxxas Maxx's as the same exact thing happened to my wife's original V1 before it went wide
Never a dull moment at diamond dust
NOPE😂🤣
Throw the Corally Sketer into the mix...thing is a (fast) tank!
OH DAUM you didn't just say that🤪😜😳
Lmao the beginning🤣🤣
What a day that was 🤣😂 but it didn't stop there😱
@@rcguygarage 😳
Can u do an arrma outcast v2 vs Arrma Notorious 6s v5 since they're currently the same price? I wanna know if I'm gonna regret my decision for buying the Notorious lol
That's in the works
@@rcguygarage awesome!
Run of bad luck, but you were smiling the whole time so it must have been worth it.😆
It was🤣😂👍💯
That wheel 😂😂, all been there
YES😂🤣
The axles are weak in that spot have been had them break on my v1 and the v2 I have now !
Yes I 100% fully agree with that statement which is why Traxxas knowingly while the vehicle is being created made upgrades at the same time
You must have banged the wheel on the maxx running on the street with your son I’ve put my v2 though hell it loves it toughest rc I own without a doubt
That is very possible but it wasn't me that crashed it was him😂🤣😂🤣
Bad luck hehe 🙂 I am waiting for your Rlaarlo on the skatepark video. That could be magic, funny or just a big bad crash 🚀🪂🙂👍
Yes that's most likely next video I honestly can't remember what video is where in the timeline
Hey RC Guy greetings from RI. I'm new to the hobby and was looking for good spots to run my junk,any suggestions?
What do you want the fan connection to be like? Hard to imagine a better fan that GC, so probably just need to figure out a better connector.
Awesome blast, guy! Diamond dust looks like an amazing playground!
16 volts no good.
You always have to worry when you see one of your wheels overtaking you lol.
YES🤣😂🤣😂
Traxxas: longer not stronger. Might be a new slogan 🤪
Nope
If I ever get an arrma I'm driving straight into a metal post I'd never do that to a Traxxas I'm going to tell the real truth about arrma they have a bunch of playing everything their arrmas screws are never tight people are lying when they say they're the best cars well this is also RUclips they're doing things for views in the real world people don't really go that hard on the cars they're doing it for the video. My local hobby shop only has two arrmas and they've been sitting there for over 2 years they sell about two traxxas's daily people love traxxas's arrmas are for the trash
Great video, love/jealous of the location. What's this pin issue? Eager to get a Kraton 4s v2 but ended up selling my Sledge once I realised how many issues it had, do you think it might be the same here? My Big Rock v3 was bulletproof.
No but that depends upon how abusive you are 😂🤣 you just got to remember to buy the right vehicle for the type of driving you're doing that's all sometimes and don't expect too much from something without upgrades. The V2 for me I can only speak on the outcast is my favorite vehicle in a 4S platform
@@rcguygarage Thanks. Similar driving style to you, don't abuse my cars Talbot-style and then expect them to live. But man the Sledge was plagued by QC issues big time, and different (IMHO) to design flaws in general. They totally pretended the O-ring and center diff issues were fictional. I mean, FFS...
@@lukebaines7785 I missed the pin issue question. That was resolved as I had a preproduction model. The thing is as near to perfection as you can get knowing nothing lasts forever or is perfect.
@@rcguygarage Thanks again, that works for me!
Is the Maxx worth the money?
Who knows? I'm trying it out
With Cvds yes
Outcast: KIA
MAXX: KIA
UDR: TBD
Prognosis: DB Pro FTW 😎
Why is it called Diamond Dust?
Because if it was crushed diamonds it's a fairly destructive material it gets in everywhere because it's dust I believe it has crushed Mica dust with it which creates that sparkle
Upgrades for my Maxx V2 include the V2 Revo aluminum stub axles and nuts, metal driveshafts, Max 8, a roll cage, GPM spur gear cover, and GPM motor mount. My only problem now is that the lower and upper bulkheads in the front and rear crack with time and big 20ft plus jumps. I didn't mess with those plastic hubs for long either. I have Traxxas aluminum front and rear hubs and c hubs. So yeah, I have like $1k into the damn V2 Maxx to make it durable enough! 😂. Hopefully you get that driveshaft issue fixed with the V2 Outcast 4s.
😳What's the DAMAGE on all that???
@@rcguygarage around $1k! Yeah I know I know. But I can throw the V2 Maxx around and not care how it lands. My 6yr old son beat the crap out of it at a construction site with zero damage. 😂
@@joseCalderon1976 Know how they have those memes or sound clips nowadays when I read 1K I heard that sound clip "RUN"
@@rcguygarage It's the rabbit hole of the upgrade process. Heck I have over $6 in upgrades between the Outcast 8s and EXB K8S 😂😱
@@joseCalderon1976 $6 dollars wow that's great!!!! yes I'm sure that's a typo 🤣😂
Maybe that axle was damaged from the last run? At least the wheel didn't break loose 40 feet up the sand mountain 🤔😬🙆♂️
It could have broke at any point been a fracture from an incident or defective OTB as I've shown🤫
You've got to admit it was funny
@@rcguygarage it was hysterical 🤣🤣🤣
If a broken part is going to end a day. Nothing better than that!
Unfortunately funny
This was hilarious 😂😂
July 22nd can’t come sooner!
My 1:10 Outcast threw a wheel, and the nut was still totally there. WTF? It had so much torque that it destroyed the plastic wheel. I'm currently spending $100 a week on repair parts for that thing, but damn it rips. You have failed to convince me that I should be running Traxxas instead. lol
I wasn't trying to CONVINCE anyone . . . . AND my 4s pick for 2022 IS the Outcast 4s V2
Nice video!! Great cars 😀
It is the tires. From the vids I've watched of people running them, wether on pavement or dirt, it does sway like the Xmaxx on stock tires. They run the same way on the Hoss which is the one that originally came with sledgehammers. The only way to stop it as much ,if you wanted it to run straight, was to up TSM. I think the Sledge is probably the best rc on sledgehammers. Now Traxxas does gear their stuff in more for off road to toss around in cornes and flip rotation as proof with the Xmaxx tires and now the sledgehammers. Arrma let's you run pretty straight on road and off, even with tire ballooning. And to me the best tire on all but 2 6s Arrma RCs are the backflips. Perfect for the Outcast/Notorious, of course, the Kraton and Fireteam.
Bring the red cat out there thats my trucks
wtf is diamond dust? that spot looks amazing. wish i had a spot like that near me. i mean i am 5 mins from mass but i dont think theres anything like that around here.
Think about diamonds crushed into dust and possibly the damage that that dust could do that's why it's called diamond dust
Tactical nuke!!!! 👍👍
These should be popular everyone always torn between the two . I bought the v2 Maxx bc arrma didn't release thier version. Which one do you prefer or you not teady make that determination
To be quite honest with you after running multiple packs through both in question they both have positives and negatives I will say I am leaning towards one 🤫
@@rcguygarage so it’s been 8 months…which one did you lean to?
@@fernandoroybal3968 they BOTH are great but I choose Outcast to an extent and it's a really tough choice
I feel your pain 😞 and try the Amazon turbo fan 30x30 metal case and holds up pretty good .
My max kept doing the same thing when I ran it in any kind of dirt.. definitely thinking about getting the new 4s armma recently bought the TLR Typhon which is my second RC! Love your vids and information about RC!
The video ive been waiting for im stuck between both including the Granite idk what to pick i do like the Maxx V2 cause i want a mini maxx since i have the Xmaxx and i do like the monster truck look but i like the Outcast its a wheelie beast 🤷🏻♂️…The edits are hilarious 😂….get outta hea im walkin hea!! I hate that my rear dog bone popped out lost it first 5 minutes of driving my 4tec -_-
👍💯🤣 Yep it happens to EVERY RC at some point
@@rcguygarage yeah man🙄 LMFAOOO
Even my kajui outlasts these garbage bags. Just bring an arsenal of upper links with you.
YES😂🤣
That's Traxxis for ya Guy. They r over priced and not that great. But ppl still buy them.
On the note I am glad I didn’t get the V1 Maxx this V2 is what it should have been out the get go
I got to tell you I still thoroughly enjoy the V1 because of its shortness you can flip it around easier
@@rcguygarage hmm the local hobby shop has the V1 on a clearance sale it’s pretty good deal. I have been eye balling it they have 3 orange ones left that’s it then no more V1 Maxx’s. I sold my Xmaxx so it might be an appropriate down size buy lol.
I'm still glad I got the V1 as I got to enjoy it sooner and prefer easier flipping being slightly shorter in length than V2. I still would have modded it anyway. I have proline 3.8" belted badland tires,8990 light kit,2085x servo, 8996X steel shafts with their alumium splined hubs and nuts and HR racing bellcrank. But even right out of the box the V1 was a very solid overall MT IMO and the toughest I've had so far. I also had the original e-maxx back in the day
Maybe GC is watching and send you a voltage regulator?
Nah I'm good 👍 good products but I want weight savings is this thing 💯
Understand
Dude that sucks. I hate when it's the little things that put an end to the day.
Take a ramp and take off from the ledge on the left and land on the dirt island. 🤣🤣🤣 You'll see the ledge at 5:00-5:10 min into video.
Lol don't feel bad put about 3 gand into a outcast 8s exb and keep braking the pins in the dog bones they call me not 1 pack Blades lol
YES🤣😂🤣😂👍💯 it's the struggle and it's REAL
I've had good luck with my 6s exb, first rc I bought in February this year. Now I have almost 20 trucks n cars. Only thing I've broke on my exb was wing screws come out. My worst purchase so far has been the vorteks 3s, they should have recalled it lol
I just remember scene from the movie wrong turn....
Bruh. What is with this place and claiming rc lives? Lol. The runs were sick while it lasted though
*cough take the Rlarrlo there. Cough*
I wouldn't want to SHOW UP ALL THE BEEFCAKE RCS at once😂🤣
It’s not trash bag #2 is trash bag v2😂
Sorry to remind you... But YOU had to say it.... YOU went and jinxed yourself when you said "Diamond dust is the rc car killer." But that sucks; both cars are dead. What happened to the Maxx?? Did it break when it hit the outcropping at the top of hill? It looks like the tire got completely shredded off at the knuckle. That's bad. Well, at least you'll have somethings to wrench on in your next live feed of covid and coffee. Bash on, Guy. lol
Put the velcro of the bigrock
Anyone lock tight their wheels around here😂
All that torque with upward inertia...wheel loss!!