Sainsmart Genmitsu 4040 Pro CNC first run
HTML-код
- Опубликовано: 6 апр 2023
- The Sainsmart Genmitsu 4040 pro cnc machine is well built and easy to assemble. Easel works flawlessly to operate the machine and carve my first project. The 4040 pro has a working area of 15.7" x 15.7" x 3.1". This desktop cnc machine allows you to cut and carve from many material types such as wood and acrylic. The base of the machine has MDF as the spoiler board so you can replace the base as it gets used.
Check out the Sainsmart Genmitsu 4040 Pro CNC machine here:
www.sainsmart.com/products/ge...
And on Amazon here:
amzn.to/3ZVretr
Watch the full assembly video here:
• Genmitsu 4040 Pro CNC ...
Ram Pumps available on AMAZON
amzn.to/2EWrQHN
Also available on Land To House Website:
www.landtohouse.com/rampumpsales
Help Support land To House by Paypal:
paypal.me/landtohouse
Send Mail to Land To House:
Land To House llc
P.O. Box 323
Micaville, NC 28755
See whats coming up before it hits RUclips on my Facebook Page:
/ landtohouse
Land To House is a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
Adorable 775 motor for the router. An idea with those clamps: you could put scrap bits of the same 3/4 plywood under the other end so they sit parallel to the mdf bed; the wing nuts and washers can clamp better like that.
Simply, clean and nice WORK !!! Looks good ! With LOVE !!!
Nicely done 😊👍🏼
Suggestiion with the supplied clamps. Use the provided threaded rods or a long screw to insert in clamp (strap) threaded hole. Adjust height so strap is slightly higher than workpiece. Next, as you have done, insert a second threaded rod thru the strap slot and screw into base. Attach wingnut to this rod and tighten. When completed, it should have the strap tilting down to the workpiece, resting on the back screw for a firm hold. To maximize holding pressure, position the strap where the leveling screw is furthest from the hold down screw. This requires the workpiece position to be within the length of the strap end and then slot end.
Additional suggestion: the used method in the video will sooner than later, pull the mdf inserts out and damage the mdf.
you can put a bolt upside down in the threaded parts of the clamps, and use a spanner to put pressure on the workpiece.. t(on the supplied ones)
Hello! I have Easel pro with Genmitsu 4040 pro. When I try to install the machine 4040 pro is not listed in the pull down menu for available machines. What machine do I need to select to be able to control my 4040 pro with Easel? Thank you!
A bit curious, why the 4040 pro when you have the Carve King 2 sitting right there? CK2 has a slightly larger working area, runs the trim router and "arguably" appears to be a stronger machine. Just curious as I have been looking at both of them.
Both machines were sent for youtube videos. They both work well and I don't have any real negative things to say. The small clamps need an upgrade but other than that both are good machines. The carve king does come with a nice router.
How did you set up easil
Not sure if anyone hitting this would be able to answer this question, but I have the 4040 Pro, and came up with a design that I would love to use as my first project with it. I have created an STL file for it, but Genmitsu uses a different file type for it's stuff, and I've tried finding how to convert an STL file to a Genmitsu file, and haven't been able to find anything. Are there any tutorials on how to do this anywhere? Anyone done this successfully? I've had the 4040 for a couple months now, and the enclosure I have it in is just gathering dust at this point.
I have put a gt2 belt and pulleys on the Y axis to keep the motors in sync it starts to screech and squeal when the Y axis is out of sync next upgrade new z axis way to much flex and new spindle motor.775 motors don't last I'm on my third motor
Great video, could you possibly explain how Easel works with this cnc? What I mean, is did you have to install anything or is it running directly from the cnc being plugged in via usb? Thanks again and looking forward to your feedback.
When you 1st Sign up for easel it gives you a file to download that will allow the CNC machine to talk to easel. When you plug up the control board on your CNC it automatically installs the driver's. It really is quite simple. I did have to unplug my other CNC machine in order for easel to recognize the new machine.
@@LandtoHouse Thank you very much
Its a nice machine but dont get too happy with it. I got my 4040pro in February and it died on me today. Now i gotta wait till monday for customer service. Enjoy it while it runs...
Could you tell us what happend to your Machine? I was thinking about getting myself the 4040pro...
@DM-me3gb since i purchased the machine in February, I have had the cooling fan go out in march, next the main board died in april and now the most recent break down is the air assist pump for the laser engraver attachment and the main power switch is also broken. Genmitsu does have good customer service and the replacement parts do get sent out quick via DHL. However it is still inconvenient to have down time every month as part by part fails.
@@AWMarine Thanks for the input. Gives me something to think about.
@DM-me3gb in that price point it is one of the better machines.
Discord server
In the 600 dollar range is this the one you would recommend?