I love the whole build of your kayak. I have one just like it and in process of building and adding to it also but you do excellent work and very neat which I like also. Thank you.
I commented on the livewell video. Again, this is not the livewell for a PA14 nor PA12...unless you modify the intake tube to be longer thru the scupper hole into the water. The Hobie V2 livewell you have is for the Outback and other models like Compass. The correct Hobie-XL livewell for PA does have an internal plastic shield (Removeable Tank Partition-RTP), protecting pump and red-drain release from being clogged. Your V2 should have this RTP as well. However, I do add an external Bubbler when using minnows fishing fresh water. But saltwater fin/baitfish, the livewell itself is excellent in recirculating constant flow of salt water into & out of the tank, no additional bubbler/aerator needed. nice set up tips on the BlackPack crate. Love mine too.
I’ve got the 13x16 blackpak pro for my predator pdl. Love it so far. Only complaint would be the hooks on the rod tubes. They seem to get stuck sometimes. The great thing, however, is those boxes are so customizable.
Another Epic build bro. Gave me a few, DIY Add-on ideas, for my new wilderness systems kayak crate. I love my matching colors. I did purchase my new 2023, Oldtown Sportsman, 120 pdl, this year. And i upgraded to the new PP 768 J2- Bixpy. Much more power, battery life, for covering, and exploring new water. Getting it all dialed in, and setup. The Boat is looking awesome bro. Can't wait to see the speed, on the 3hp. 😎 🌊 🎣 🛶
Can you do a video about your battery setup? I see that you have your NK motor battery in the back and your Xi3 motor battery in the front, but what battery are you using for your accessories? Are you running Garmin Livescope yet? If so what battery are you using for that? Thanks!!
Nice set up! If you have room along the side put a YakAttack 90 mount for your light so you can mount it and leave it. One less thing to forget when loading up.
That's love wells are rediculace in price, which is why I haven't bought one. I've been kayak fishing for 9yrs now. Mostly for bass but I do fish for crappie & striper. Nothing like hooking into a monster striper in the kayak!!! I just use a bucket with an airator I made. Then once I'm ready to launch I use a flow through bait bucket. Its always kept my minnows or herring alive just fine. I let the flow through trial behind me with paracord. If I'm gonna make a longer hill I'll pull it up & set it in back. So it doesn't cause as much drag. Then drop it back in when I'm to my spot.
I have a hobie baitwell and I think it works pretty good - but my live bait is shiners or jack smelt - so nothings swimming into the pump. Also I think it’s a 6 volt battery specifically to reduce the flow - couldn’t you change to a 12 volt battery to increase the flow to keep that bait out of the pump?
How is the paddling of the kayak affected by putting the seat at its highest level to fit the 2 tray box? New subscriber who just bought a used Hobie Pro Angler 14 180. Thanks for all you are doing!
Thanks for watching, I’ve never used the lower position in any of my pro anglers, you only use the top position, it paddles great and is more comfortable 👍🏼
sorry forgot...on the tube from bilge pump into the livewell, I added a slotted plug to end of tube, similar to the intake tube thru the scupper hole, that will keep smaller minnows/baitfish from swimming into the pump.
lol, yes,, it is upsetting that factories charge so much for a product that is basically incomplete and not throught through. This is true for Hobie and for OldTown. Those are the only 2 Kayaks I have expreience with.
After 12 years owning multiple Hobies, they have lost me as a customer for good. They don't stand behind their products or warranty anymore and their quality have gone down while the prices just go up.
I love the whole build of your kayak. I have one just like it and in process of building and adding to it also but you do excellent work and very neat which I like also. Thank you.
Always cool how each of us Yak owners create their own custom versions of what they do.
I commented on the livewell video. Again, this is not the livewell for a PA14 nor PA12...unless you modify the intake tube to be longer thru the scupper hole into the water. The Hobie V2 livewell you have is for the Outback and other models like Compass. The correct Hobie-XL livewell for PA does have an internal plastic shield (Removeable Tank Partition-RTP), protecting pump and red-drain release from being clogged. Your V2 should have this RTP as well. However, I do add an external Bubbler when using minnows fishing fresh water. But saltwater fin/baitfish, the livewell itself is excellent in recirculating constant flow of salt water into & out of the tank, no additional bubbler/aerator needed.
nice set up tips on the BlackPack crate. Love mine too.
I have been looking at that box. Nice to see it on the kayak. I have the large h crate now and it is ok.
Great video. I’ll be adding one of those to my Bonafide. I’ve been needing a place for the trolling motor battery, so this is perfect.
I’ve got the 13x16 blackpak pro for my predator pdl. Love it so far. Only complaint would be the hooks on the rod tubes. They seem to get stuck sometimes. The great thing, however, is those boxes are so customizable.
Another Epic build bro. Gave me a few, DIY Add-on ideas, for my new wilderness systems kayak crate. I love my matching colors. I did purchase my new 2023, Oldtown Sportsman, 120 pdl, this year. And i upgraded to the new PP 768 J2- Bixpy. Much more power, battery life, for covering, and exploring new water. Getting it all dialed in, and setup. The Boat is looking awesome bro. Can't wait to see the speed, on the 3hp. 😎 🌊 🎣 🛶
Nicely done .Try making you baitwell a single pass outfit .
Can you do a video about your battery setup? I see that you have your NK motor battery in the back and your Xi3 motor battery in the front, but what battery are you using for your accessories? Are you running Garmin Livescope yet? If so what battery are you using for that? Thanks!!
Very nice build man. Great vid. I’ve got the old school Black Pack. Now I want a new one dangit lol. Very nice though. Good job
Nice set up! If you have room along the side put a YakAttack 90 mount for your light so you can mount it and leave it. One less thing to forget when loading up.
That's a great idea!
I love my landing net from Yakattak. I just spent the money and got a black pak I will try that with the net.
Yessss TJ! This is awesome. I’m going to modify my 16x16 very similarly. Thanks for sharing.
No problem!!
That's love wells are rediculace in price, which is why I haven't bought one. I've been kayak fishing for 9yrs now. Mostly for bass but I do fish for crappie & striper. Nothing like hooking into a monster striper in the kayak!!! I just use a bucket with an airator I made. Then once I'm ready to launch I use a flow through bait bucket. Its always kept my minnows or herring alive just fine. I let the flow through trial behind me with paracord. If I'm gonna make a longer hill I'll pull it up & set it in back. So it doesn't cause as much drag. Then drop it back in when I'm to my spot.
I have a hobie baitwell and I think it works pretty good - but my live bait is shiners or jack smelt - so nothings swimming into the pump. Also I think it’s a 6 volt battery specifically to reduce the flow - couldn’t you change to a 12 volt battery to increase the flow to keep that bait out of the pump?
Another great video. You have my entire tackle in your kayak alone lol all jokes aside. Great diy ❤
Nice build. When are you testing the motors? Would love to see that video!
Very soon!
That's a snazzy setup. Thanks for sharing. Love your channel.
Thanks for watching!
Greetings from Calgary man. Another awesome video. With this crate, now, you messed up all my plans with my Ascend 128X kayak. Just kidding.... lol
Love your box and the upgrades. Love your videos. Thank you
Thanks so much!
How is the paddling of the kayak affected by putting the seat at its highest level to fit the 2 tray box? New subscriber who just bought a used Hobie Pro Angler 14 180. Thanks for all you are doing!
Thanks for watching, I’ve never used the lower position in any of my pro anglers, you only use the top position, it paddles great and is more comfortable 👍🏼
Used your video for some ideas. Thanks
sorry forgot...on the tube from bilge pump into the livewell, I added a slotted plug to end of tube, similar to the intake tube thru the scupper hole, that will keep smaller minnows/baitfish from swimming into the pump.
Did you drill holes into it to attach to your motor?
Nope, check out the build video 👍🏼
lol, yes,, it is upsetting that factories charge so much for a product that is basically incomplete and not throught through. This is true for Hobie and for OldTown. Those are the only 2 Kayaks I have expreience with.
Been going back trying to find the Xi3 remote holder on the vantage seat . Anyone know the brand ? Thanks in advance
That’s something that I 3D printed for myself. I don’t think anyone makes one.
You ever thought about putting outriggers on ur yak…. What if you roll over and say you lost some of your stuff
Wish these boxes were sealed, worried about flipping or getting water into the box, nonetheless I might get it just to store the battery
Get some fish slime on it already! Jk man, very impressive rig. Thanks for sharing the info.
This is already more than a kayak,
this is already F-16
for my country)!
No surprise that hobie uses the cheapest live well pump.
After 12 years owning multiple Hobies, they have lost me as a customer for good. They don't stand behind their products or warranty anymore and their quality have gone down while the prices just go up.
I'd have hooks hung in net lol
😂