It's an Alpha hot air engine. The Alphas have a 90° phase, and the displace or cold cylinder runs in a separate cylinder.........as the video shows..... The Beta type have the hot piston and displacer in the same barrel.....
Тут роль охладителя играет довольно длинная медная трубка. Повысить КПД двигателя можно установив небольшой ребристый радиатор на второй ( холодный) цилиндр и обеспечив его обдув...
@@user-xl5zu6zs9uдвигатель Стирлинга это реально работающее устройство и данная схема в том числе. Не скажу за эффективность, но крутить маховик будет
Why hasn't someone scaled this up to something that can power a home? Perhaps with a battery inverter system as I imagine rpm control could be tricky. Combine it with a rocket mass heater so you can burn scrap wood and paper to power a home. That kind of burner can be made very efficient and relatively clean because it burns very hot.
Meu amigo, Grain!! Vejo todos os teus vídeos e acho oncrível tua criatividade!! Êste stirling modêlo Alfa é muito legal, se você quer mais rpm, colocar arame de cobre amassado dentro do cilindro quente, regenerador!!! Só um pedacinho para não atrapalhar o percursso do pistão!!! Valeu!!! Talvez você consegue 900 ou 1000rpm, Abraço !!! Marcos Valério Ciência, Rio de Janeiro!!!!!
Thanks for the advice, maybe someone will read here and take advantage. Actually RPM could be bigger, but I made the fire small. I did this because with a large flame the temperature was higher and the plastic tube melted and the chamber was depressurized. I did not find material to make a nozzle on a hot syringe.
@@grain-diose compreendi, meu querido!! Eu também já passei por esta situacão, e eu gosto de falar com você, porque você é uma pessoa compreensível e humilde!!! Parabéns pelo seu lindo trabalho, que sempre aprecio e aprendo, Também!!! Que Deus abençoe você e abençoe teu caminho!!! Abração do seu companheiro de Ciência, quem sabe a NASA dá uma chance pra nós???!!!!
Awe, man! The flywheel page is unavailable. I will look for another one. Thank you for the example video. I don't know if example is the right words but it is so good showing how you made it!
Yes you are right. But I think the friction here does not interfere, because the syringes are good and I additionally rubbed the pistons with graphite. And about the mass, I agree. But this is a lot of work, you need to cut the pistons and also cut the syringes (chambers). And most importantly, if I shorten the syringes for example 2 times, then the attachment will be more difficult to do. The fastening must be rigid and at the same time it is necessary not to break the glass and besides this there should be a place for heating. In short, things get very complicated. And the main question is what is it for? The goal was not to make the most efficient engine. The task was to show how to make the Stirling engine with minimal difficulty.
О!О!О! Изящней и проще решения (что сродни гениальности в натуре!!!) конструкции движка Стирлинга, я точно не видел ЛАЙК Сам!!!! видос, как всегда - уровень ЛАЙК!!!
very good, I really like to see your videos with clear explanations of millimeters or centimeters like this sir. thus everyone can imitate and benefit from your video. Keep on working, sir, I hope you continue to be healthy.
you are very interesting person and get to have so much fun. I love the things you show us. How long with this motor run before wearing out? I guess maybe you could use oil I'm not sure what that make it last longer? Thank you for showing this is so cool
Hey! Amazing work! I’m trying to build a Stirling engine too on my own, but I have a small problem...How did you do to isolate your plastic tube from the heat ? Mine is melting...thank you if you answer, I really need some help :D
some late info. good work the baseplate is noisy. anchor the whole thing, better. then, diagnose the source of the Knock. engine top speed might be greater, if connecting rod length is increased; maybe an inch. the output is Where. googlegtranslate
Does the copper pipe that connects the cylinders serve as a regenerator? If you filled the copper tube loosely with steel wool would it improve the efficiency?
Долгие приветствия. Замечательный опыт, но когда я захотел повторить его, я не нашел алюминиевого колеса с маленьким колесом с другой стороны, и я не нашел базы, которая держит колесо.Подскажите, пожалуйста, где купить большое колесо из 60 мм и маленькое колесо с другой стороны, а также база, спасибо
Desi language me samjhau na to aisa he ki jab hawa ko garam karte he to vo failti he aur piston ko dhakati he jaise piston aage sarakta he vaha vaccum ban jata he jisse dusra piston khich jata he dono piston ke movement se engine chalne lagta he
The backside of the flywheel attach a rope on it and connect it to a dc motor. Then run the engine then It will generate electricity from the motor. If it is running alone then what was the sense of making it 🤪
Thank you, but I did not understand the question about "to regulate the length in the flywheel". If you mean the length of the crank, the length can be changed, the length of the crank is unprincipled, but it is better not to make it too short, inaccuracies in the performance of the parts will affect. There is another nuance, it is advisable to make sure that both pistons enter their chambers as much as possible, I think this is understandable. And then adjust the angle of the connecting rods.
I made pistons from the plunger of the same syringes. I cut them and glued pieces of thermoelastic connecting rods inside. For better sliding of the pistons, it is worth covering them with pencil graphite.
Всегда интересовало почему его не делают в линейном исполнении, зачем колесо то, роль возвратного механизма может выполнять и взаимодействие постоянных магнитов, а если сверху намотать катушку, то и ток снимать можно сразу, без всяких электромоторчиков, почему так?
"Колесо" это называется маховик, без его массы и инерции двигатель с кривошипно-шатунным механизмом не будет работать. В линейном исполнении я делал как-то на принципе термоакустики и ток с катушкой и магнитом снимал - ruclips.net/video/rh78vsyGwXI/видео.html
Это же не бутылочное стекло - пробирки, колбы всякие тоже из такого делают. Если сильно нагреть (газовой горелкой, например), то оно плавится. Если резко охладить (водой, например), то тогда лопнет конечно.
@@john5036 Look behind the flywheel There's that small wheel idk what's it's called Perhaps you can connect a string to it to a dc motor (connected a same wheel like this in it)
Обыкновенный двигатель Стирлинга, неужели в первый раз видите? На ЮТ полно да и в Википедии описано. Да и на Али давно продаются разных от 20-30 баксов.
Friends, if you are interested in the development of my channel, you can support it here - buymeacoffee.com/graindiose
Физика может вдохновлять. Наш учитель говорил, что математика царица всех наук и служанка физики.
This is an interesting configuration. Seems like it outputs a decent amount of power for such a small cylinder size and small flame.
One of the few successful and real steam engines on RUclips
Arun daa ye steam engine nahi he Stirling engine he
@@Sunitapatidar9090 thanks for correction
It's an Alpha hot air engine.
The Alphas have a 90° phase, and the displace or cold cylinder runs in a separate cylinder.........as the video shows.....
The Beta type have the hot piston and displacer in the same barrel.....
@@philwoodfordjjj8928 thanks for clarification
I am not an engineering student so I am ignorant. But they are amazing and I hope to make them someday.
Love how you celebrated at the end… exactly me when I finally fix something after 24 hrs of tinkering
Тут роль охладителя играет довольно длинная медная трубка. Повысить КПД двигателя можно установив небольшой ребристый радиатор на второй ( холодный) цилиндр и обеспечив его обдув...
Подскажите это реально работает или фейк хочу повторить просто?
@@user-xl5zu6zs9uдвигатель Стирлинга это реально работающее устройство и данная схема в том числе. Не скажу за эффективность, но крутить маховик будет
Lots of work for that build. accuracy is key to these working correctly! Great Job!
The only word i heard in this video is Yes
:)
you (we) are really lucky ,most of his videos don't even have that one word .
yo this is a real work . bcs he used genueine materials , other youtubers edit the video but this dude is geniuse . so i subbed him .
Why hasn't someone scaled this up to something that can power a home? Perhaps with a battery inverter system as I imagine rpm control could be tricky. Combine it with a rocket mass heater so you can burn scrap wood and paper to power a home. That kind of burner can be made very efficient and relatively clean because it burns very hot.
Oil and coal magnates:😬
I'm researching for this right now
It is good idea to make two syringe Stirling engine easily, really appreciate!
Meu amigo, Grain!! Vejo todos os teus vídeos e acho oncrível tua criatividade!! Êste stirling modêlo Alfa é muito legal, se você quer mais rpm, colocar arame de cobre amassado dentro do cilindro quente, regenerador!!! Só um pedacinho para não atrapalhar o percursso do pistão!!! Valeu!!! Talvez você consegue 900 ou 1000rpm, Abraço !!! Marcos Valério Ciência, Rio de Janeiro!!!!!
Thanks for the advice, maybe someone will read here and take advantage. Actually RPM could be bigger, but I made the fire small. I did this because with a large flame the temperature was higher and the plastic tube melted and the chamber was depressurized. I did not find material to make a nozzle on a hot syringe.
@@grain-diose compreendi, meu querido!! Eu também já passei por esta situacão, e eu gosto de falar com você, porque você é uma pessoa compreensível e humilde!!! Parabéns pelo seu lindo trabalho, que sempre aprecio e aprendo, Também!!! Que Deus abençoe você e abençoe teu caminho!!! Abração do seu companheiro de Ciência, quem sabe a NASA dá uma chance pra nós???!!!!
Awe, man! The flywheel page is unavailable. I will look for another one. Thank you for the example video. I don't know if example is the right words but it is so good showing how you made it!
Very nice idea 🔥🔥👍🏽… just wanted to know the materials used for the piston and the tube.…..it would help a lot…
Thank you
You have always different idea thanks man
I like grain video very neat and clean.
Thank you!
some info. the plunger/piston length is Excessive. consequently,
there is Excess mass in the pistons; and Friction losses are
greater.
Yes you are right. But I think the friction here does not interfere, because the syringes are good and I additionally rubbed the pistons with graphite. And about the mass, I agree. But this is a lot of work, you need to cut the pistons and also cut the syringes (chambers). And most importantly, if I shorten the syringes for example 2 times, then the attachment will be more difficult to do. The fastening must be rigid and at the same time it is necessary not to break the glass and besides this there should be a place for heating. In short, things get very complicated. And the main question is what is it for? The goal was not to make the most efficient engine. The task was to show how to make the Stirling engine with minimal difficulty.
Это тот же самый Альфа Стирлинг, но конфигурация очень разумно изменена
О!О!О! Изящней и проще решения (что сродни гениальности в натуре!!!) конструкции движка Стирлинга, я точно не видел ЛАЙК
Сам!!!! видос, как всегда - уровень ЛАЙК!!!
Спасибо!
@@grain-diose Ок!!!))
You are best
Thank you!
very good, I really like to see your videos with clear explanations of millimeters or centimeters like this sir. thus everyone can imitate and benefit from your video. Keep on working, sir, I hope you continue to be healthy.
Thank you!
You are a genius.
You're legend .
Thank you!
@@grain-diose man don't call thanks ,cause you're legend you Eraned this. I hope one day I I'll be like you ..
Very very good thank you
отлично продолжайте в этом направлении, несморя ставлю лайк
great vid and totally like the music!
This love is true McDonalds ad was play, lol.
is there a substitute for 60mm flywheel that i can use.
Well done.
Brilliant!
Awesome video
It's smooth too!
Eres todo un genio de los inventos, me gusta mucho éstas máquinas sterling, un gran saludo.👍
Love the vids, currently making some kind of Stirling attached to a HHO generator and make fuel
You can put hidrogen or helium inside Stirling engine to increase eficiency
@@luciansantoscaetano i boght one from Amazon, and it did not eaven work in the first place :rofil:
You can get those higly balanced flywheels out of a vcr. I have 2 myself.
Yes, you are right, and I searched for it but did not find it.
I just didn't get why it you didn't use the syringe's default plunger, would it work? Any explanation?
I used stock pistons, but they needed some work to fix the cranks.
you are very interesting person and get to have so much fun. I love the things you show us. How long with this motor run before wearing out? I guess maybe you could use oil I'm not sure what that make it last longer? Thank you for showing this is so cool
You can use any fuel, cuz the burning component i outside the chamber
Rất tuyệt vời với động cơ xin cảm ơn đã chia sẻ với khán giả
Genial, eres un profesional, saludos amigo Grain.
Hey! Amazing work! I’m trying to build a Stirling engine too on my own, but I have a small problem...How did you do to isolate your plastic tube from the heat ? Mine is melting...thank you if you answer, I really need some help :D
The syringe must be a glass one.
@@chudybzyk yes the syringe is of glass but the tube which he attached to the syringe 3:27 is not melting, how?
@@leotheinnocentlion295 Idk but it's working lol
That looks more like a copper tube imo
Use Teflon tube it takes much higher temperature than pvc
Apki vidio hittt hi sir
Awesome
Very good!
Bravo veramente :)
Try to put a steel wol inside the cold tube... It might have more power
some late info. good work the baseplate is noisy. anchor the whole thing, better. then, diagnose the source of the Knock. engine top speed might be greater, if connecting rod length is increased; maybe an inch. the output is Where. googlegtranslate
Never trust in the opinions of a free energy fanatic.
Bonjour, peut-on faire avec des tubes en fer à la place des tubes à essais ?
Me scoring 92/100 in History by giving the worst exam ever had.
4:16
Bonjour les pistons sont ils tous les deux étanches à la compression ? Merci..
Very very good thank you💐
Does the copper pipe that connects the cylinders serve as a regenerator? If you filled the copper tube loosely with steel wool would it improve the efficiency?
yes
In some diy stirlngs the displacer has a lot less with than its ciilynder.
Долгие приветствия. Замечательный опыт, но когда я захотел повторить его, я не нашел алюминиевого колеса с маленьким колесом с другой стороны, и я не нашел базы, которая держит колесо.Подскажите, пожалуйста, где купить большое колесо из 60 мм и маленькое колесо с другой стороны, а также база, спасибо
What exactly are all the parts that we have to buy at once to implement this project? Thanks.
pls explain how it is work by animation of movement off hot air and piston
Desi language me samjhau na to aisa he ki jab hawa ko garam karte he to vo failti he aur piston ko dhakati he jaise piston aage sarakta he vaha vaccum ban jata he jisse dusra piston khich jata he dono piston ke movement se engine chalne lagta he
You explain very well brother can it work with 5ml cyring or not??
I used 5 ml syringes
@@grain-diose these are glass syringes?
Cool build, but why on earth do you pre-drill for the Forster drill???
This is brilliant.
Out of interest which bit is the regenerator?
some late info. since this engine is Not loaded, the accuracy of opinions about the degree of timing offset, is dubious.
But what if u provide heat for tube and u kept ice or liq nitrogen around other tube
Great, this gives the best effect!
The Wheel base (large and small wheel), do we have to buy it alone?
Also, what is the size of the syringe?
Thanks
What did you use for the plunger??
Awesome 👏 video…..No steel wool in the hot tube ??
Well done
Nice work ! Is it graphite on glass pistons ? As pencile graphite ?
Thanks. Yes, I rubbed the glass pistons with a pencil. It improves gliding and tightness as well. This is the analogy of dry lubricant.
@@grain-diose On my engine I use graphite, excellent lubricant, BUT when the temperature is very high the graphite piston gets stuck
Great work @
Why not put an enclosure around the second cylinder to contain a freezing mixture of salted ice?
Yes, it can be done.
Works better using glass syringes. Obviously. How much power & torque does it produce? Can I connect a generator to power my house? Joking. Obviously.
nice
Where you bought the Seringuen? ( I'm in europe )
Nice! how long is the piston arm??
The backside of the flywheel attach a rope on it and connect it to a dc motor. Then run the engine then It will generate electricity from the motor. If it is running alone then what was the sense of making it 🤪
Направи да се самонагрява, чрез динамо, и нагревен тел, в камерата. Make it self-heated, through a dynamo, and a heated wire, in the chamber.
El recubrimiento de el pistón puede ser de acero inoxidable ?
Стеклянный шприц это очень дорого
Awesome videos live ever Master ^_^
Just for my curiosity.
If only one side of the syringe had a way to regulate the length in the flywheel?
Thank you, but I did not understand the question about "to regulate the length in the flywheel". If you mean the length of the crank, the length can be changed, the length of the crank is unprincipled, but it is better not to make it too short, inaccuracies in the performance of the parts will affect.
There is another nuance, it is advisable to make sure that both pistons enter their chambers as much as possible, I think this is understandable. And then adjust the angle of the connecting rods.
@@grain-diosePerfect \o/\o/\o/
Thank you a lot
Awesome runner - well done. Are you going to make a generator from it?
Better just attach the wheels and put on the road :)
@@grain-diose hahaha yes... would be a good runner
Hello where did you get support for the Flywheel 60 mm?
I used ready-made Flywheel and support from another device. Aliekspress sells all parts for Stirling.
@@grain-diose I found the steering wheel, not the stand.
Do you mean this? - aliexpress.com/item/32893626330.html
what material you used for the connecting rod and the piston?
i need it please..
I made pistons from the plunger of the same syringes. I cut them and glued pieces of thermoelastic connecting rods inside. For better sliding of the pistons, it is worth covering them with pencil graphite.
Thise is areal or fake please answer
Muito muito show, parabéns
Can I ask where does the hot gas goes?
Nowhere. The gas heats up at one end of the tube, then cools down at the other end.
thanks
Всегда интересовало почему его не делают в линейном исполнении, зачем колесо то, роль возвратного механизма может выполнять и взаимодействие постоянных магнитов, а если сверху намотать катушку, то и ток снимать можно сразу, без всяких электромоторчиков, почему так?
"Колесо" это называется маховик, без его массы и инерции двигатель с кривошипно-шатунным механизмом не будет работать. В линейном исполнении я делал как-то на принципе термоакустики и ток с катушкой и магнитом снимал - ruclips.net/video/rh78vsyGwXI/видео.html
@@grain-diose Какой же он маховик, он ведь ничем не машет? ) Видео пропустил, благодарю.
YES !!!
Thanks I can now produce current by replacing that with a Motor
You couldn't get hardly anything from it it doesn't have the torque
Как всегда класс !!!
Спасибо!
where did you buy the flywheel? can i get link?
aliexpress.com/item/32706699768.html
Where cna i buy a flywheel set
www.aliexpress.com/item/32965620183.html
www.aliexpress.com/item/32893626330.html
Whats inside the tubes
А где в наше время взять стеклянные шприцы, скажите пожалуйста
Под видео ссылки.
when one piston is in the other needs to be out right ?
en.wikipedia.org/wiki/Stirling_engine
Why the syringe doesn't burn
These syringes are made of thermal glass. This is sold on Aliexpress - aliexpress.com/item/32655390758.html
Sir magar ye to plastic jala dega na
Шайтан! 😮
Шайтан-машина 🤣
А как у вас стеклянные колбы не лопаются???
Это же не бутылочное стекло - пробирки, колбы всякие тоже из такого делают. Если сильно нагреть (газовой горелкой, например), то оно плавится. Если резко охладить (водой, например), то тогда лопнет конечно.
Why doesn't the plastic syringe melt?
These are both syringes made of glass. The link is in the video description - www.aliexpress.com/item/33013716404.html
Следующий шаг - небольшой генератор! После - увеличение масштаба конструкции!
Those engen real or fake please answer
Haven't you seen the Stirling engine?
ruclips.net/video/tlK1giaIGFY/видео.html
You can buy yourself ready - aliexpress.com/wholesale?SearchText=stirling+engine
Can someone please answer me, can I make this engine with a dynamo to light a bulb?
Where should I place the dynamo to make it rotate by the rotation of the flywheel?
@@john5036
Look behind the flywheel
There's that small wheel idk what's it's called
Perhaps you can connect a string to it to a dc motor (connected a same wheel like this in it)
I remembered the name, a pulley , yes
I made this same but not working 😭
Sir Place ice on another side..
You're right. A Heat Sink of some sort on the cold side would make it more efficient.
Реально работает или фейк хочу повторить боюсь что не получится ?
Обыкновенный двигатель Стирлинга, неужели в первый раз видите? На ЮТ полно да и в Википедии описано. Да и на Али давно продаются разных от 20-30 баксов.
@@grain-diose да ви
жу впервые