How to make a Simple Stirling Engine
HTML-код
- Опубликовано: 13 сен 2024
- - Diameter of the can 110 mm
- Can height 55 mm
- Piston thickness 30 mm
- The gap between the piston and the glass is about 2 mm
- The inner diameter of the tube is 8 mm
- Tube length 600 mm
Music: ES_WAY BEYOND SEEKING (INSTRUMENTAL VERSION) - JOHAN GLЦSSNER - www.epidemicso...
Black color and sun instead fire? Maybe a lents to accelerate temperature :v
You are absolutely right. And this will work without a lens, provided that the sun is on the side and the cold air outside.
ruclips.net/video/vd919241NJo/видео.html
Black colour absorb more heat and produce more radiation
What Is Islam?
Islam is not just another religion.
It is the same message preached by Moses, Jesus and Abraham.
Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
It reminds us that since God created us, no one should be worshipped except God alone.
It also teaches that God is nothing like a human being or like anything that we can imagine.
The concept of God is summarized in the Quran as:
{ “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)
Becoming a Muslim is not turning your back to Jesus.
Rather it’s going back to the original teachings of Jesus and obeying him
@@ahmdabdallah5811 What is islam ? islam definetly not a spam not a jihad like socail warfare / i m muslim an you are disgusting ...
that is realy cool. only the temperature between black and white could do the job. thanks for sharing
I like how there are thirty billion ways to make a stirling engine
Exactly. It is the most versatile engine out there, most likely.
That has been the best in simplicity stirling engine.
Simple to make? Maybe.
Simple to use? Not at all.
I am trying to come to a deep enough understanding of Stirling engines that i could come up with my own novel design. I may not be smart enough to actually do that, but it really helps to see creative designs like this.
I love the rhythm it produced especially before the candle was put out,I believe it could be used to make a pleasant music
*Если стенки сделать из 5мм металла то получим следущее, момент нагрева будет дольше но и установка будет в разы дольше работать. Так как и охлаждающая стенка тоже толще а значит будет дольше сохранять прохладу. Тем самым продолжительность увиличится. За необычность и креативность лайк видео однозначно заслуживает. (и млн просмотров)* 👍
You could use this sort of thing to make a different sort of Stirling fan. Just a flapping blade. A little extra weight on the long stick to counterbalance. Also, if you didn't feel like you needed to see the displacer rocking, you could make the displacement chamber from a tuna can.
Yes, there are many types of external combustion/heat Stirling type engines.
Hallo all your videos are great and fun to watch i espacialy like your engine videos many engines that are on sale to buy are really expensive and you show how to build them i am building them its really easy and fun to build and your experiments are very cool too! So goodbye greetings from Germany
Thank you, greetings from Moldova!
Grain, that is very cool.👍
I also like your glass cutter. I think I will make one...
I love the rhythm it is making. Great perfection! 👍🙃
Mais uma super experiência incrível !!! Superando as expectativas .
Elegant, excellent!
Best illustration ever!
Another method to cut glass-bottle:
fill water at position you want to cut, then some oil (not much,about 0.5cm) , burn hot iron put into ... then you get split bottle at the position.
I. LOVE. THIS. Great video again. Thanks a lot for your inspiring work!
Excellent thinking ...out of box...
Congratulation for the working model of Rocky! :) Nice to see this moving cylinder, moving pistons type Stirling again and again on different channels with few modifications! Greetings from Hungary, BLADE
looks like the video you've uploaded
@@lekman3223 Yes, I have, but that video has pretty low quality, so I think I'll update it soon with an optional tutorial parts.
@@AttilaBlade you are the best influencer
@@lekman3223 Hmmm, I'm not an influencer I think. :)
Ingenious construction!
The original was built by Hubert Stierhof after my friend Simi112, than me...9,5 years ago! :)
Ingeniously! Thank You for sharing.
Congratulations. It is a nice hydraulic pendulum.
greetings from Brazil to all. Wow!!! This Stirling engine is new. very good. continue with these amazing projects. success.
:) It is not new, maybe on grain's channel. This type engine called Rocky born more than a decade ago. But pretty cool huh? ;)
Nunca vi algo assim baseado no princípio de Stirling. Parabéns !!
Genius...
Best idea...
nice
Рад возвращению!)) Очень интересная конструкция.! Неожиданно! Удачи. Чтобы всё заладилось и наладилось. Хотя так бывает весьма редко.
Здорово! Полный атас!
it give me inspiration very much
When grinding glass be sure to wear a ventilator
GodGladiator1 he wasn't grinding
@@glitchcharliemartin1157 ok. Sorry for the inaccurate word usage. Sanding/grinding are very similar in usage. In both literal and figurative instances. So to restate with the best word choice possible for this instance; When sanding glass it is still advised to wear a ventilator since the glass particles are still airborne.
GodGladiator1 do you think he is dumb of course he is wearing one
@@glitchcharliemartin1157 lol you're just a troll. I was stating that for the general people who watched this video. If you watch the video, all he shows to wear are safety goggles states nothing for the ventilator. Enjoy being a troll somewhere else.
GodGladiator1 fuck you too bud
Really clever design! Scale it up, expose it to sunlight, add a magnet to moving arm and a fixed coil to the base and you can generate a small amount of electric power.
A very very very very very small amount of power.
@@macrumpton Yep :-)
It could Jack up 3 ton and then release it to make enegy from gravity energy
@@valllhalla LOL. You would always spend more energy jacking up 3 tons, than you would get from its fall, no matter what system of conversion of energy you use.
Genial ,Super
Você é muito bom em tudo oquê faz, meus parabéns!!!
Hey thats cool, subbed. Well edited. All the best
very good
very good auto
I had a duck that was made from a glass tube with reservoir on one end with a red liquid in it. I assumed alcohol. and a duck figure head covered in felt material it was balanced between 2 stands you set a cup of water under the ducks beak then dip the beak in the water until it was wet. It would rock back and forth dipping the beak in the water. It would do this until the water evaporated! That was more than 60 years ago.
PERPETUAL MOTION HAS BEEN MADE POSSIBLE
Awesome project
Interesting model. Good build
Legend has it its still going
Es un genio el que hizo esto!
Lamentablemente no se me ocurrió esto. Diseños similares están totalmente en RUclips, fue hace unos 5-10 años.
Amazing diy
This one is self-starting.
Genius!
Îmi place foarte mult motorul. Tăietorul de sticlă e foarte interesant.
I like your all videos. Can yo make video how copper attract rice from 5 to 7 inches
Nice
Nice.
Awesome! Can this be scaled up? What happens if it flips all the way over? I have so many questions..
I'd like to see a Peltier Device on one or both sides of this thing. hot on one side, cold on the other. Power could be run through the balance pins. A 12 Volt Peltier Device works at 1.5 Volt also.
Nice! Thank you!
Amazing ideas brow
Like a duck drink toys...very good.
Ok Mr. Grain sir, you have caught my attention! I like your video, I am now subscribed.
Bine. Domnule Grain, mi-ați atras atenția! Îmi place videoclipul tău, acum sunt abonat.
si este movimiento pudiera generar, aprovechar, para crear energía sería fantastic...saludos.
wow amazing
nice explan easy understand
Very nice 👌 👍
marvelous.
Nice work
You are a genius!
Отличный видос !!!
О наконец-то нашел земляка
Русские все пишем в этот комментарий, это будет тип наше родовое гнездо
It's brilliant ! Do you know any example of more sophisticated engine based on that principle ?
Nice engine!
Awesome!
Very nice
Nice!
Very clever ! 🧐🇬🇧👍🏻❤️🤓🤔🤝🤝🤝
So simple that you can use house hold glass cutter, grinder etc
And another candidate for the drinking bird hat!
How big could you make this????put a magnet on it and a coil...
Hello sir!
I saw your video on Thermoacaustic engine!
I have one one question about it that, from which material I can make piston for engine?😕
The easiest way is to buy a glass syringe on Aliexpress, I gave the links under the video. In another case, you need to use graphite or a graphite surface and adjust the diameter very carefully. This is a huge job, I didn’t even think of doing this. Why, if there are ready-made syringes?
aliexpress.com/wholesale?catId=0&initiative_id=SB_20190802060758&SearchText=glass+syringe&switch_new_app=y
@@grain-diose oh! Ok! Thank you so much!
Your channel has very Nice contents!
instead of tapping the scribe mark with a hammer try heating it with a flame and/or Hot water it will expand causing it to break cleanly at the scored mark
It doesn’t matter, in this case the most important is an even scratch and I made the first scratch not very even and in some places it disappeared. When the scratch is perfect, a few strokes are enough. See how professionals cut glass, do they warm something? No, they first of all make an even and continuous scratch and after that it remains only to break off with a hand. But when they cut the glass thicker (5-6mm), then it does not work to break it off, and then they likewise lightly tap on the back side. I have seen this many times and not I came up with it. Why invent something if glass has been cut in this way for hundreds of years. By the way, robots cut glass in production, do you think there is something warming there? No, everything is the same there - an even scratch and then a light blow in this place. Warming and cooling - these are the students on RUclips who came up with no idea about cutting glass. In addition, if the scratch is bad, I’m sure that heating will not help you break off evenly glass.
I will explain to you why the scratch turned out to be uneven and not continuous. I made this device quickly, not very carefully, and most importantly, that the glass cutter was fixed firmly. And the glass cutter should be on the spring, because the cans and bottles are not perfectly round. Therefore, only a spring can provide a uniform hold for an even scratch depth without gaps. The scratch should not only be even but it should be the same in depth. After that, any glass, even a curve, will break evenly in a line.
Free energy???
no
@@raisfathroosdian5120 Of course it's not possible to make perpetual motion machine but this video shows so...
@@TechsScience I no know
PARABÉNS PELO VÍDEO, BRASIL OK.
Obrigado da Moldávia!
Movimiento perpetuo, eres un genio, amigo...saludos.
have you powered it iwth solar yet????
Thanks
that's art
1 number mind set
Sir so much love from India... I loves your video Idea
hot and cold water is the best
Cooool 🇩🇿❤️
The original design.
cool😀
First view
First liked ❤
bravo
Hahaha. That's cool :)
creative banget
Тhe model is brain training. because many consumers have lost it somewhere, and are asking about where to apply this model.
Аnd you can apply it wherever your brain reaches.
Por quanto tempo esse movimento continua ?
Depende da qualidade do acabamento e do grau de aquecimento. Eu tenho cerca de 40-50 segundos, veja o amortecimento das oscilações no final deste vídeo.
И для чего или даже где применить столь чудное изобретение?Смысл сей конструкции?
Часто, или даже большинство
изобретателей не доводит до практики свои изобретения.
Use the hot water method boil water and Immerse to the cut line light tap
Hi grain Long time to see how are you
Excelente 🇩🇴🇩🇴🇩🇴🌎
alberto santos santos polanco un genio
@@ruberacosta1155 siiiii
To need use it in solar insolation, and include mini voltage generator.
If you paint the left side black and place this device in the sun so that the rays fall on the black side, this will work too.
Temp difference hot >cold ,cold < hot
The only one that subtract energy from the surroundings instead of adding it
isnt there a proper glass cutter?
This Stirling engine is like a clock, its battery is any source of energy such as heat and cold
Cold is a lack of energy fyi
Is this an "engine" or a 'motorization'? - - - - - This simple mechanism is both!
I’m not sure and you can call it what you want. :)
No, that's a Stirling metronome :-)