Блин!!!!!!!!!!!!!! Мистика какая -то!!!!!)))) Несколько дней уже обдумываю - не сделать ли паровой двигатель , и для опять же будущего генератора (мысли магнитные кружатся )))!!!) и даже для чего нибудь, что по по снегу двигаться будет и этот чёртов снег убирать! Само собой даже картинка подобная, на белом , "заснеженном" поле перед глазами мерещилась!!! (Мысленные эксперементы!!!) И вот тебе - на!!!))) Как говорится сон - в руку , а тут фантастика, такое совпадение - Видео - руку!)))) Не вру в натуре, немного даже в шоке!!!)) Прям какой - то знак свыше!!!))) Классный видос!!! Лайк!
A truck for cutting glass tubes or bottles. Dip a sowing thread in alcohol, wrap it around where you want cut and set it in fire. Wait a few seconds then put it under cold water. It'll crack along the thread line
Cool 😎 project…. Wonder if you can use a long single glass syringe to power the thermostatic engine instead of an additional test tube at the end?? Thx
Great job! Thank you for sharing it. Just an observation: in the materials section (0:43) you wrote "glass siringe 20 mL", but the syringe you use is a 10mL one.
Yes, I also did not perfect, in this engine, it is important to thorough mechanical accuracy and rigidity. This applies especially to the flywheel, it should be done on a lathe, but my flywheel is made by hand.
What Is Islam? Islam is not just another religion. It is the same message preached by Moses, Jesus and Abraham. Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. It reminds us that since God created us, no one should be worshipped except God alone. It also teaches that God is nothing like a human being or like anything that we can imagine. The concept of God is summarized in the Quran as: { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) Becoming a Muslim is not turning your back to Jesus. Rather it’s going back to the original teachings of Jesus and obeying him
If you added a constriction between the heated chamber and the piston it will work better. The constriction itself will help with the formation of low pressure region that would pull the piston back in
um salve do Brasil + like. máquinas como essas são incríveis. até a NASA se interessou por elas na corrida espacial usando espelhos para concentrar a radiação solar. tá uma ideia pra um vídeo: Motor Stirling solar. parabéns.
did it work? cause were making project to light up an led and we saw a video in youtube that mislead us and now were going to start all over again thank you
I have not experimented with different syringes and test tubes, but I think that you can use different ones. Thermoacoustic engines have a feature: less volume - higher frequency / speed, more - vice versa.
Yes, I also got some broken ones. Some sellers do bad packaging. And not all syringes are well suited for such use as in the video, because the piston does not move very smoothly. It is necessary to polish it with graphite or with another grinding paste.
Хобби
the rubber ring to stop the piston over traveling is also the "choke" which is necessary.
I love the ingenuity in the use of whatever is available. Great video!
Very very nice video. Before I didn't understand how does it work but now I have understood it!
CD-RW discs work so much better than just CD-R ones, literally doubles the speed of the engine. Great job!
Simply superb 👍 Village Science Factory gonna make this video 👍
Another great and educational video.
realy the simpliest concept. great one, thanks for sharing. kinda thermoacoustic
Buen video felicitaciones saludos desde Ecuador 🇪🇨
Grain, that is beautiful.
I’ve been wanting to build one of these. Beautiful, thank you!
It is fake.
The total system work depends on motor by electric.
One of the best on RUclips
It’s really worked. Thank you sir.🇧🇩
These are awesome, any idea of the power density though? How big would a 1kw one be?
Awesome work. i just found your videos and I've learnt a lot from them . I just subbed. i can't wait to see what you will be doing next. cheers!
With use sir
вот это уже полезно. продолжаем так же
bravo , rar de văzut așa ceva
Wowww...!!
I was searching for such type engine. Nd my search has stopped on this video😊..
It's great I will try it in my home
Very, very good!!!!
Really fantastic.... I like it
Excellent!
i love this ! maybe use stainless steel wool and add a bit of water next time!
country boy why do you add water?
Sharva Paralkar so one side is colder wich can make it even faster
So beautiful meni engine thank you sir 🤝🇧🇩✔
Блин!!!!!!!!!!!!!! Мистика какая -то!!!!!)))) Несколько дней уже обдумываю - не сделать ли паровой двигатель , и для опять же будущего генератора (мысли магнитные кружатся )))!!!) и даже для чего нибудь, что по по снегу двигаться будет и этот чёртов снег убирать! Само собой даже картинка подобная, на белом , "заснеженном" поле перед глазами мерещилась!!! (Мысленные эксперементы!!!) И вот тебе - на!!!))) Как говорится сон - в руку , а тут фантастика, такое совпадение - Видео - руку!)))) Не вру в натуре, немного даже в шоке!!!)) Прям какой - то знак свыше!!!))) Классный видос!!! Лайк!
Спасибо, но я не понял, какая связь с паровым двигателем. :)
@@grain-diose Ну мысленная картинка была вся, почти как у вас, только скажем в пробирке вода. И клапан.))
A truck for cutting glass tubes or bottles. Dip a sowing thread in alcohol, wrap it around where you want cut and set it in fire. Wait a few seconds then put it under cold water. It'll crack along the thread line
Really fantastic
Very nice idea watching from India
looks like it works well
Awesome thanks 😊
how long it work.and what is damage
Excellent work
Cool 😎 project…. Wonder if you can use a long single glass syringe to power the thermostatic engine instead of an additional test tube at the end?? Thx
Amazing 👌
What about the metal thing you attached to the back of the syringe pump,whats it called ?
Great job! Thank you for sharing it.
Just an observation: in the materials section (0:43) you wrote "glass siringe 20 mL", but the syringe you use is a 10mL one.
Красиво сделано!
do we have to replace the metal in the test tube?
It's a beautiful engine. I liked Stirling engine and I have made some thermoecoustic Stirling engine, but it's not as good as yours. Thanks Grain.
Yes, I also did not perfect, in this engine, it is important to thorough mechanical accuracy and rigidity. This applies especially to the flywheel, it should be done on a lathe, but my flywheel is made by hand.
@@grain-diose Yes I know. Thanks
Congratulations, this engine really is not easy to make it work.
Leandro Wagner.
Thank! You are right, without experience it is difficult.
You have a large collection on your channel on this topic!
What Is Islam?
Islam is not just another religion.
It is the same message preached by Moses, Jesus and Abraham.
Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
It reminds us that since God created us, no one should be worshipped except God alone.
It also teaches that God is nothing like a human being or like anything that we can imagine.
The concept of God is summarized in the Quran as:
{ “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)
Becoming a Muslim is not turning your back to Jesus.
Rather it’s going back to the original teachings of Jesus and obeying him
?
ahmd abdallah
Isn’t Islam that religion which instructs you to murder anyone who refuses to agree with you?
If you added a constriction between the heated chamber and the piston it will work better. The constriction itself will help with the formation of low pressure region that would pull the piston back in
6:09
Thanks for sharing
Nice idea
As always, well done my friend!
Thank you!
Sir have u removed black washer which is attached up to the piston
спасибо за интересные видео
И вам за просмотры и отзывы.
Awesome video. Please help me out. How's the packing done. And after packing, should I take out the piston from the syringe.
um salve do Brasil + like. máquinas como essas são incríveis. até a NASA se interessou por elas na corrida espacial usando espelhos para concentrar a radiação solar. tá uma ideia pra um vídeo: Motor Stirling solar. parabéns.
Can't understand
Sure I will try it
Hey grain....can we use a metal piston and tube...please answer its urgent
You are great
Oh, come on man - please turn the last CD upside down so that it's pretty on both sides. :-)
OCD?
Im amazed I will make one. Thanx
did it work? cause were making project to light up an led and we saw a video in youtube that mislead us and now were going to start all over again thank you
Can we use 5ml syringe?
If no then what mm testube should we use to match wit the 5ml syringe
I have not experimented with different syringes and test tubes, but I think that you can use different ones. Thermoacoustic engines have a feature: less volume - higher frequency / speed, more - vice versa.
EXCELLENT sirji
It's a very nice experiment I enjoyed it, please, continue making videos.
Thanks, I will try.
@@grain-diose Sir
Please suggest me any final year project. I'm student of Mechanical Engineering. From Pakistan
What is the time required for provide heat?
Where could I get the glass tube ?
How to find power to temperature ration for such engine?
Is there any one feels uncomfortable when trimming glass
A little bit, not the worst tho
perfekt super Video Danke
can we use steel wire
nice
you can see my channel #PelushB
Perfect
Amazing! Thank you for making this Awesone Tutorial. Also, i know how to make that
I don't give a shit of what you can or cannot do. Stfu dumbass
How does piston rotates
Yes awesome your work
Nice video.Kindly explain how it works. Thanks.
en.wikipedia.org/wiki/Thermoacoustic_heat_engine
hello! where did you get the metal from 2:10? thank you!
I bent and hid the copper plate. You can use other material.
Chic parabéns 💃
Why do we add a counter weight, does that not reduce the quantity of power output?
Nice. SuperNice. It´s working!!!!!!!!
Great job!
Will this power a phone? Also can you scale it down a tone? Like pocket sized?
To charge the phone is not effective. I advise you a solar panel - ruclips.net/video/WWKRbpPzECc/видео.html
Awesome
Where do you get that fast adhesive glue? The one with the liquid and spray. It's not available on ebay UK!?
I do not know, I buy from us in Moldova. Their site is indicated on the bottle - www.somafix.com.tr/
super glue and activator
nice one.
I ordered some glass syringes but the first one arrived broken so I have to wait for the others to arrive.
Yes, I also got some broken ones. Some sellers do bad packaging. And not all syringes are well suited for such use as in the video, because the piston does not move very smoothly. It is necessary to polish it with graphite or with another grinding paste.
@grain can it made with 1 cd or not
Brp you deserve 5 🌟🌟 🌟 🌟 🌟
Grain what is the thing on the syringe can anyone tell
The steel wool acts a heat sink?
very.GOOOOOOOOOOOOOOODD job
Goood jop
Maceracı Defineci
Nice!
Where can you buy heat resistant tape from?
you give me very much khow how ever! thank
Is there a leak made in the joint packing. Please elaborate
The joint packing must be airtight.
Nice video bro would you please link me products used in projects
Sub for more great experience experiments video click here #Adiikeexperiments
#professionalcyclistAdityaGupta
Very essential
Where is the air inside cooling? if the wool is cooling the air, how long? I am skeptical.
You are right, this is not an effective design. But this is only a model to demonstrate the principle.
I made it as it is ! The expansion of piston is taking place but it is not sucking back again 😕😕can u helpout
buddy,,kindly guide us about the piston making for this engine, how to seal it,,,,
Just buy a syringe from the link in the video description.
@@grain-diose ok sir,,,very very thanx,,,,,
Wow great
hell thanq my friend
Nice
please can someone tell me why is steel wool used?
And bro what brings the piston back? Counter weight?
The fly wheel dumbass the counter weight is mean to reduce vibrations generated by the piston moving up and down by countering the pistons weight.
Gonna build mine use my old harmonic balancer as a flywheel
Starting of video is like ASMR
👂 🎧 👂
Engineers ASMR
I think it is best and easy way to build this
From India
👌👌
Nice
Muito legal
Директо с большова диаметра и длинны спринцовки не получется ли также, просто без епруветки.