Snoozez Alice night one

How to put on the Alice Night One

[@stefblanco3887]

Best tutorial. Short and sweet. Straight to the point! Thumbs up 👍🏽

[@sj2024sj]

Thank you v much ...this was the best display I found on RUclips!

[@lindapipitone3723]

I found this to be very helpful, thanks

[@x.jessica.lynn.88]

I had a issue with the belt flickering orange all night I try to adjust it but it kept doing it I ended up giving up and I just ended up going to sleep with it on anyway this is the second time I tried using one of these machines the last time I used an older version and the finger reader didn’t work Time with the new one the belt didn’t wanna work

[@x.jessica.lynn.88]

So I didn’t get much sleep last night and I have to return the device today

[@marilynbermudez131]

Where you buy? Cost

[@jarhead4657]

Is he seriously chewing gum in this.

[@mellifluousmallow]

The nose thing came off during the night, which means i have to redo it, right?

[@ruslanzhao1926]

Can you show a clip on how to tighten the strap? I'm really struggling with it.

[@chottyschannel4382]

YES. THIS!! I'm SO pissed at this strap right now

[@cognitivedissident2881]

My finger strap is different it's a foam strip I don't know if I'm supposed to peel it back or not?

[@randomnav]

how can you demo a machine that does not work?

[@tessiertjt]

Hey, interesting question. The machine just flashes green lights so if you are putting it on correctly it should never be an issue.

[@tessiertjt]

It does just needs batteries.

[@mannoplanet]

I am about to do this home test. Now I use pillows and my back against the wall which I think helps my snoring at least. Should I use this device with these or just in a normal bed for my test?

[@tessiertjt]

Try to simulate a normal sleep, what that may look like for you Vs. someone else can vary. Simulate your normal sleep.

[@doratruenorthtribal6679]

Hi, I'm a RN. I'd like to think I'm very well versed in hooking people up to pulse oximeters and canula equipment . I hate this device. I couldn't get the the belt light or finger light to stay green no matter what I did. I hope this recorded what it needed to (because at $650 every 24 hrs its kept at home - just my crapy insurance thanks a lot Providence) I feel like there is no guarantees that this obtained the necessary data.

[@chottyschannel4382]

Thank you. Tightening te strap is INSANE. No can DO. returning it in the morning!

[@williamharrison7452]

I tried one machine last night and couldn't get the finger sensor to work. Tonight the "brain" that's strapped around my chest continuously blinks a green plus sign. Can't get it to stop, even removing the batteries and re-installing doesn't help. Two strikes.

[@lmoldovanyi]

Does it go above or below breasts?

[@ashleyguest3670]

Above

[@tc6hp]

How many hours do you have to wear it

[@tessiertjt]

Sorry about the delay. Normally, you only need to wear it for 4 hours, but the more information the longer you use it the better a polysomnography tech or your doctor can interpret.

[@sellmefire3071]

you didnt help me trevor

[@fookutube501]

I dont get it,does it turn on by its self or what and how do you turn it off...This one kinda fail bad

[@jules202041]

Fook Utube yes it turns on by itself when you’re all connected there will be 3 green lights.. to turn off hold button down on machine for 5 seconds or it will power itself off after 30 mins.

[@crazyrob8306]

is this test fairly accurate?i mean a good sleep test for sleep apnea?and soes it record when you snore etc?thanks

[@tessiertjt]

Yes. Of course going to a sleep lab is the method with the least chance of error. However, these tests work well for at home studies. They record-Airflow, when you are breathing, oxygen level and heart rate

[@marcelbalmoral5500]

Does it matter which finger you put in the probe ?

[@Anniiiiiiiie]

The index finger of your non-dominant hand is recommended but the sensor can be placed on any desired finger. Route the sensor wire over the back of your hand and secure to the back of your hand with the included medical tape. After several breaths with the finger sensor properly in place, the icon will stop flashing yellow and turn green. If the icon does not turn green, check the position of the sensor and make sure it is securely in place.

[@hertsland4131]

1 connect belt around chest make sure its a snug fit
2 put on finger sensor and tape it on
3 put on nose sensor and tape it each side
4 device will turn on automatically when belt is connected
5 3 icons come up on top of device one for each senor. once all sensors are attached and ok , icons turn green then go out
6 go to sleep..............or try to
7 in the morning if you press the button on the front briefly then four segments should show on top of device if all four are green then device has enough data. If no segments show then take device of and leave for 15mins then press button again and segments should come up,

[@chottyschannel4382]

1: GOOD LUCK TIGHTENING THE STRAP

[@genesjewel1315]

This helped thx

[@therealtoxicbeast2267]

I can’t get the f ing finger thing to work. 🤯

[@chottyschannel4382]

Yet another Alice NightOne vid with ZERO explanation how to TIGHTEN THE F'ING STRAP!!!

[@annacoslo2052]

Make sure everything is in it place.. 😮😅

[@rachelroundy3829]

This is helpful but why chew gum while giving a presentation? It's very distracting lol

[@sellmefire3071]

This is the video you should watch of you have problems
ruclips.net/video/xNnffCvlLlA/видео.html

[@lildickenzzsmith5644]

Serious? It’s not going to work, yuh great machine

[@tessiertjt]

It is just because it does not have batteries. The machine will turn on once it is strapped on the lights go on and they go off once you go to sleep.

[@oliviamclean6323]

Trevor, lose the gum. Otherwise, nice tutorial.

[@tessiertjt]

Thanks for the tip. It is one of my first times doing on camera videos. Next time I will not have gum when I make a few more :)

[@tariqhafiz5362]

Poor directions . Not helpful at all

[@buppie215]

Useless.

[@gardening911]

Wow! chewing gum!