Thanks for watching our DIY Transformers costume video! So..... Bondo turned out to be a bit of a disaster (14:20). Please share your suggestions for a body fill to give this cardboard transformers costume a smooth finish?
@@Confused_Elio , This is made with cardboard and Styrofoam insulation. I am sure you could just make it only out of cardboard but wouldn't be able to get the nice shape. not sure if that answers your question. :)
thank you for sharing this step by step for the costume, you really save me,, my kid wants this for the halloween,, i hope i can accomplish doing this..
You got this. I know I missed a few things and haven't had a chance to buildna step by step manual. Let me know if you have any questions and I'll get back to you right away..
I'm a 18 years old girl, and Yeah, yesterday I decided to start working on this, cause I'm a Transformers fan and Bumblebee is my Favorite, Maybe I don't have the money for all the materials here, but I'm trying to do it at my own way with this as a example, no matter what they can say of me! So... Go ahead and Do it if you have motivation as a Transformers fan!!!
Thanks for watching and glad you liked it. Not sure if you had a chance to watch the entire video but I did have some lessons learned. Let me know if you have any questions, happy to help.
Love it! The effort involved and design is inspiring. Pro tips with Bondo if I may; Apply more than you need, then use the rasp/surform to shape it, especially the high ridges, just when it's no longer soft but in a firm but tacky state, you have to be careful though. Usually after about 10 minutes. Don't leave bondo to fully harden before working it. You can sand it as soon as it stops clogging paper and well before it's fully hard. This will save you a lot of energy and time. My most valuable tip: When applying bondo, put loads on, then shape it with a clean blade. Clean your blade off each time you want to shape the bondo. It's life changing when you figure that one out.
Excellent Zero Days! Exactly the pro tip I was looking for, much appreciated. Hoping to tackle another one of these this summer, I'll be keeping these tips top of mind.
I’m a mom with no idea what I’m doing when it comes to building or being handy, but I’m going to attempt this for Halloween. Wish me luck! Lol. And definitely let us know if you get the pdf instructions written ☺️
Hey! So sorry for delayed response. Not sure if I will get the PDF out as I am struggling with time these days. If you have any questions I am happy to try and help the best I can.. One tip would be make the car a bit wider if possible.. it will make it look more realisic.. thats what ill be doing on the next one :).
I'm starting to like Transformers cause of a friend heheh, but Can I do this even if I'm a 18 years old girl? (For some would be weird lol) Bumblebee is my favorite (and my friend favorite character too) and I really want to make myself a cardboard costume of him 💛
Hey! Of course you can make this.. I want to make this for the adults next year so we can go out for Halloween as a Transformers family. If only I could find the time to make them
Awesome costume!! Great walk through as well!! Semi Pro Tip.. Be confident in yourself and don't insult yourself such as your voice. We all hate our voices and it took hundreds of videos for me to get used to my own voice lol. I personally think your voice is good for youtube and sounds ok to me. Keep on keeping on!!
Hi Amber! This has actually been on my mind laltley as a few people have asked me as we approach fall. I will try my best to have them available by end of August. I will let you know as soon as the link is available. If you are looking to get a head start and have any questions just respond to this comment. Excited you are going to tackle this project. Your child will love it.
Few things… The frame. The tapered portion of the frame is 4”. So subtract that from the total length desired for your long sticks. The side tabs should be 2.5” long so they protrude 1”. The paint stick pieces flanking the coat hanger can’t be within 2 1/4” from the edge to allow the Velcro. The cardboard pieces need 1 1/4” added to the desired height for the 1” tabs and 1/4” bend allowance at the bottom. When cutting the foam do not template the wheel wells as they will be set 1 1/4” lower when the cardboard tabs are in use. I cut the foam with a hot wire cutter (way faster). Also be sure to have mirrored sides when using the spray adhesive. I’m only partially done… but these are the lessons from today. I’m sure there are more to come. Thanks!
Thanks Molly! I tried to capture everything but it was tough. Going to attempt another DIY Transformer here soon. Definitely lots of room for improvements
Any paint primer will work or a combination paint (yellow) and primer. If you paint directly onto cardboard any acrylic paint will do. You may need to do several layers to desired color. If you go this route I suggest using mod podge a large jar more than 8oz 12:52 to seal the paint. Always by extra paint and sealer. Rather have extra than needing more.
Hey, I would say take your time with sculpting the styrofoam and you won't need to use either.. won't be as good as a finish but the easi-fil is too brittle. I heard if you add some fiberglass resin to the bondo it's easier to work with, but takes longer to dry.
You never mentioned those lines you made in the middle of the cardboard template. How did you get those measurements and how did you know where to cut for rear fender?
Hey Austin! Nice catch. I totally never got to that as I said I would. The lines in the middle are separating the hood, doors and rear fender. My measurements were. 12" for the front section, about 9.5" for the middle section and 12.5 " for the rear section. These measurements do not include the 1" tab that is used for glue. Keep in mind these are just suggested measurements. I would use a piece of cardboard to replicate how you want it to look and figure out the perfect dimensions to make it look realistic. If I do this again I would actually make the car about 1" wider. Hope this helps. Good luck on your transformers costume.
Thank you! Unfortunately, I haven't had a chance to complete the PDF. I'm trying to have available for October 1st. If you have any questions before then, I am happy to help you out.
Sorry.. I wish I did a better job.. was one of my first YT videos.. had no idea what I was doing.. and haven't found the time to make a pdf instruction manual.. but, you should be able to get most of it watching the video.. need to build it to the person who is wearing it. So likely my measurements wouldn't work
Hey! sorry for the delayed response.. Not really sure.. you could use cardboard only but you wont be able to get the rounded edges.. would still transform though. If I think of something I;ll let you know.. You let me know if you come up with something :)
Hey, I am super sorry, I have no idea and dont have this documented. I would say get your little human to go in this position and take a measurement from top of head to feet. give a couple inches on the back and a few up front and you should be good. hope this helps..
Starting this build and have a couple questions :) is there a certain dimension you use for where to cut the rear fender from the front? And certain dimensions of where to put the wheel wells or how big the wheels we're you made? Thanks!
Hey! So sorry for the delayed response.. Excellent choice for your 5 year old.. I just checked my bill of materials and I didnt even keep track of that :(. If I am not mistaken I used 4 large mixing sticks for the frame. I only used the small mixing sticks to mark the rims. Go to Home Depot and they will give you as many as you say you need. usually the large sticks are behind the counter. I hope this helps. let me know if you have any other questions.
Hi Joanne, I'm so sorry this isn't available for you. Unfortunately, I'm still not able to produce this. Please follow the video for a guide to build and let me know if you have any questions. I will try to respond quickly. Regards
Hi Cesarsalmeron9305. Not yet. I am in the progress of building another costume and will compete this pdf shortly after. Hoping to have it available September 1st
Sorry, I intended to create the PDF but have not been able to.. I built this with almost zero instructions.. im sure if someone really wants to build it for thier kid they can figure it out. Can't please everyone.. Good luck and Happy Halloween :)
Thanks for watching our DIY Transformers costume video! So..... Bondo turned out to be a bit of a disaster (14:20). Please share your suggestions for a body fill to give this cardboard transformers costume a smooth finish?
Is this cardboard friendly?
@@Confused_Elio , This is made with cardboard and Styrofoam insulation. I am sure you could just make it only out of cardboard but wouldn't be able to get the nice shape. not sure if that answers your question. :)
OMG! I could have used your video when I built a Transformer costume for my grandson a few years ago! His costume was the envy of all his friends. 🥰
Thanks, glad you enjoyed the video. Awesome you made one for your grandson.. such a cool costume. My youngest might wear this one come Halloween
@@ParentsandProjects I wanted yo post the short video of my grandson but I couldn't
thank you for sharing this step by step for the costume, you really save me,, my kid wants this for the halloween,, i hope i can accomplish doing this..
You got this. I know I missed a few things and haven't had a chance to buildna step by step manual. Let me know if you have any questions and I'll get back to you right away..
Best build in youtube.
You're awesome
I'm not a parent but I'd like this for myself
Thanks for watching Darnell! It is a pretty cool costume for sure. I am hoping to make another one in the up coming months.
I'm a 18 years old girl, and Yeah, yesterday I decided to start working on this, cause I'm a Transformers fan and Bumblebee is my Favorite, Maybe I don't have the money for all the materials here, but I'm trying to do it at my own way with this as a example, no matter what they can say of me!
So... Go ahead and Do it if you have motivation as a Transformers fan!!!
I am from India really got amazed by your work actually planning to make this for my son
Thanks for watching and glad you liked it. Not sure if you had a chance to watch the entire video but I did have some lessons learned.
Let me know if you have any questions, happy to help.
Love it! The effort involved and design is inspiring.
Pro tips with Bondo if I may;
Apply more than you need, then use the rasp/surform to shape it, especially the high ridges, just when it's no longer soft but in a firm but tacky state, you have to be careful though. Usually after about 10 minutes. Don't leave bondo to fully harden before working it. You can sand it as soon as it stops clogging paper and well before it's fully hard. This will save you a lot of energy and time.
My most valuable tip: When applying bondo, put loads on, then shape it with a clean blade. Clean your blade off each time you want to shape the bondo. It's life changing when you figure that one out.
Excellent Zero Days! Exactly the pro tip I was looking for, much appreciated. Hoping to tackle another one of these this summer, I'll be keeping these tips top of mind.
I’m a mom with no idea what I’m doing when it comes to building or being handy, but I’m going to attempt this for Halloween. Wish me luck! Lol. And definitely let us know if you get the pdf instructions written ☺️
Hey! So sorry for delayed response. Not sure if I will get the PDF out as I am struggling with time these days. If you have any questions I am happy to try and help the best I can.. One tip would be make the car a bit wider if possible.. it will make it look more realisic.. thats what ill be doing on the next one :).
Good evening, my friends. 🤗💕 Awesome upload. 👍 See you.😘💖
Thanks for watching! Glad you enjoyed.
This is the greatest thing I have ever seen its an amazing experience ❤ 😍 💖
You're amazing!
Wow very amazing 🙀
Thank you Lery Creation!
Ficou incrível seu trabalho gostei bastante show de bola já deixei o meu like 🤝🤝🤝🇧🇷🤝💯
Obrigado!
the best dad 🔥
Thanks! Trying to give these boys an awesome life.. have an amazing day Kenny!
@@ParentsandProjects thanks you to! ❤️
I m looking for starscream costume with clear and neat tutorial like this
gracias genio excelente video
Great work. What a great video. Thanks for sharing!!!
Glad you enjoyed it and thanks for watching Naiad!
Such a cool costume! I will try to build it as well in 10 hours 😀🌞
Thanks @Followthesun. You can do it!
That was really cool...... Fantastic..... Thanks for sharing such a great video. 👍👍👍👍🚗🚗🚗🚗
Thank you Kami Art! Happy New Year!
@@ParentsandProjects np....
Thanks so much.... Happy new year too.... That was really cool Transformers.... 👍
I'm starting to like Transformers cause of a friend heheh, but Can I do this even if I'm a 18 years old girl? (For some would be weird lol)
Bumblebee is my favorite (and my friend favorite character too) and I really want to make myself a cardboard costume of him 💛
Hey! Of course you can make this.. I want to make this for the adults next year so we can go out for Halloween as a Transformers family. If only I could find the time to make them
@@ParentsandProjects January starts in almost one week more so I Will start on January
Thanks! And a transformers family sounds pretty cool!
Another great video. Awesome editing.
Thanks FW! I appreciate that!
Awesome costume!! Great walk through as well!! Semi Pro Tip.. Be confident in yourself and don't insult yourself such as your voice. We all hate our voices and it took hundreds of videos for me to get used to my own voice lol. I personally think your voice is good for youtube and sounds ok to me. Keep on keeping on!!
Thanks Steve! LOL, ya it's tough editing your own voice for hours and hours. On to the next one! Happy New Year, positive vibes your way for 2022!
@@ParentsandProjects You are doing amazing with your videos!! Keep it up!
That's awesome
@firozjedi, Thanks!
Did u ever get the pdf instructions finished?? I’m struggling 🤦♀️ and I’ve promised my foster child this costume… great job on yours! We love it!
Hi Amber! This has actually been on my mind laltley as a few people have asked me as we approach fall.
I will try my best to have them available by end of August. I will let you know as soon as the link is available. If you are looking to get a head start and have any questions just respond to this comment. Excited you are going to tackle this project. Your child will love it.
Hi! Any chance you have the pdf list? I feel so overwhelmed and Halloween is weeks away.
@@ParentsandProjects pdf ?
I love this idea
Thanks Stretchy! 😱
Few things… The frame. The tapered portion of the frame is 4”. So subtract that from the total length desired for your long sticks. The side tabs should be 2.5” long so they protrude 1”. The paint stick pieces flanking the coat hanger can’t be within 2 1/4” from the edge to allow the Velcro.
The cardboard pieces need 1 1/4” added to the desired height for the 1” tabs and 1/4” bend allowance at the bottom. When cutting the foam do not template the wheel wells as they will be set 1 1/4” lower when the cardboard tabs are in use. I cut the foam with a hot wire cutter (way faster). Also be sure to have mirrored sides when using the spray adhesive. I’m only partially done… but these are the lessons from today. I’m sure there are more to come. Thanks!
Thanks Molly! I tried to capture everything but it was tough. Going to attempt another DIY Transformer here soon. Definitely lots of room for improvements
That's a great build! The costume looks fantastic! Very well explained tutorial. 👍 We follow you now, and hope to be friends! 💗 Liked!!
Awesome! Thank you!
Bumblebee after he got his final details I AM A RACE CAR
Thanks for watching Mike!
AWESOME
Thanks Ginyu 😊
Your welcome 🙏 🙏 🙏 God bless you
If we can’t find the duplicate-color primer anywhere what other primer and spray paint could we use to color the car
Any paint primer will work or a combination paint (yellow) and primer. If you paint directly onto cardboard any acrylic paint will do. You may need to do several layers to desired color. If you go this route I suggest using mod podge a large jar more than 8oz 12:52 to seal the paint. Always by extra paint and sealer. Rather have extra than needing more.
Sorry for the late response. Thanks @eajlong for responding. I hoppe you were able to make the costume
Thank you!
Would you recommend someone doing it to skip the bondo part ? And just use the Easi-Fil instead
Hey, I would say take your time with sculpting the styrofoam and you won't need to use either.. won't be as good as a finish but the easi-fil is too brittle.
I heard if you add some fiberglass resin to the bondo it's easier to work with, but takes longer to dry.
@@ParentsandProjects thank you so so much !
You never mentioned those lines you made in the middle of the cardboard template. How did you get those measurements and how did you know where to cut for rear fender?
Hey Austin! Nice catch. I totally never got to that as I said I would.
The lines in the middle are separating the hood, doors and rear fender.
My measurements were. 12" for the front section, about 9.5" for the middle section and 12.5 " for the rear section. These measurements do not include the 1" tab that is used for glue.
Keep in mind these are just suggested measurements. I would use a piece of cardboard to replicate how you want it to look and figure out the perfect dimensions to make it look realistic. If I do this again I would actually make the car about 1" wider.
Hope this helps. Good luck on your transformers costume.
Wow
Thanks RTA!
This is awesome man keep it up!
Thanks bud! Appreciate the positive feedback.
😁 Awesome!
Thanks! 😁
Toca hacerle a mi hija según como lo entiendo 😂
You got this! Let me know if you have any questions!
Hi I love this idea do you have pdf for costume design?
Thank you! Unfortunately, I haven't had a chance to complete the PDF. I'm trying to have available for October 1st. If you have any questions before then, I am happy to help you out.
Estuviese subtitulado la explicación 😢 y detallado más las medidas
Sorry.. I wish I did a better job.. was one of my first YT videos.. had no idea what I was doing.. and haven't found the time to make a pdf instruction manual.. but, you should be able to get most of it watching the video.. need to build it to the person who is wearing it. So likely my measurements wouldn't work
I’m having a hard time finding the insulation foam. What can I use instead??
Hey! sorry for the delayed response.. Not really sure.. you could use cardboard only but you wont be able to get the rounded edges.. would still transform though. If I think of something I;ll let you know.. You let me know if you come up with something :)
Can you do BARRICADE?😊
Probably could but up to my boys. I Want to build another transformer costume but they will be deciding what transformer.. they do like Barricade
Hello!
To get the measurements at this point of the video 3:56, what was your son's measurements to get to the measurements of 34" x 10.5"? Thanks.
Hey, I am super sorry, I have no idea and dont have this documented. I would say get your little human to go in this position and take a measurement from top of head to feet. give a couple inches on the back and a few up front and you should be good. hope this helps..
@@ParentsandProjectsI'll give that a try. Thank you.
Starting this build and have a couple questions :) is there a certain dimension you use for where to cut the rear fender from the front? And certain dimensions of where to put the wheel wells or how big the wheels we're you made? Thanks!
Hi Allie. Let me check and get back to you later today..
@@ParentsandProjectsI’m not so sure this question was ever fully answered ?
This is Halloween #2 of my 5 year old asking for a Bumblebee costume 😬. Do you have a very rough idea of how many paint sticks you used?
Hey! So sorry for the delayed response.. Excellent choice for your 5 year old.. I just checked my bill of materials and I didnt even keep track of that :(. If I am not mistaken I used 4 large mixing sticks for the frame. I only used the small mixing sticks to mark the rims. Go to Home Depot and they will give you as many as you say you need. usually the large sticks are behind the counter.
I hope this helps. let me know if you have any other questions.
Can you please drop the PDF file??
Hi Joanne, I'm so sorry this isn't available for you. Unfortunately, I'm still not able to produce this. Please follow the video for a guide to build and let me know if you have any questions. I will try to respond quickly. Regards
Hi, do you sell it?
Hey! No, good idea though. Maybe sell a kit
Hi. Just checking there is no pdf downloadable, correct?
Hi Cesarsalmeron9305. Not yet. I am in the progress of building another costume and will compete this pdf shortly after. Hoping to have it available September 1st
NOO That's too hard
It really isn't.. you got this..
Vale tres hectáreas de 💩 💩 esa explicación 😅
🤣🤣🤣
There are too many details missing to complete this do not try it.
Sorry, I intended to create the PDF but have not been able to.. I built this with almost zero instructions.. im sure if someone really wants to build it for thier kid they can figure it out. Can't please everyone.. Good luck and Happy Halloween :)