No filters, no holding back, no sucking up, no phoniness, no pretense, stunningly irreverent, and all wrapped up in a take no prisoners charm. I love you.
Mine is currently back with Tactile for warranty work because while I was doing the testing on mine the lock failed from just thumb pressure on the spine and almost cut the shit out of me so I sent it in. I also have a flipper Rockwall in XHP but I haven’t had any problems with it’s lock slipping or failing so hopefully it’s not a common problem. Well if I had cut the shit out of myself during my video at least it would have been good content lol definitely glad I didn’t. Well I hope your having a great day talk to you later.
I received the Knife Center Rockwall as a Christmas present. You are spot on regarding the factory edge. A knife that cost over $300 should have a better edge. I did re-sharpen with my WorkSharp system and all is good. Thanks for videos. Greta job! Subscribed
So I have come to wondering if a diamond stone, a couple ceramic stones, & a strop would make sense for the processes of sharpening. What do you guys think about that strategy?
I think the pocket clip is really good. Especially in a country where edc a knife isn't really socially acceptable. Discreet and short. Holding the knife in place. And a not typically pocket knife style of a clip, so it's not screaming "I'm wearing a pocket knife"
Thanks as always for the updates and reviews. Any indication at this point when the AWT scales for the Para 3 LW will start to be available for us normal folk? :)
@@BumbleBeeedcYT Hey, you are absolutely correct! I was not looking at my P3 LW close enough. Ordered! Thanks for the note, it made me take another, closer look.
I like my Rockwall but it has had to be sent back for warranty 3 times already. I think they have good design, Great skill at precision milling but really lack in QC.
I cut a plastic hanger with one of my folders yesterday (budget steel.) You've of been proud. I use (& care for) all of my knives. I just don't have much to use them for. But I do use them all (or would if I appreciated some of them enough to pocket them. Gotta get rid of some 😅)
That’s crazy that they sent you a knife with no good edge 😂 Hopefully they fix that issue. Those scales are soo awesome though I love my AWT scales too!!!!
I’m surprised that passed their QC.. my blade in magnacut came in screaming sharp. I’ve been beating the shit out of it. It’s only at 61 HRC, but the edge hasn’t needed much besides a quick strop. That sucks though, because the Rockwall is a sick knife!
For the record I was not eating Cheetos while watching your video I was drinking a beer. No I will not put that down lol. That para 3 looks sweet, I’m not usually into coated blades but that setup is pretty badass.
Yeah they do need to grow and improve their QC process. To be expected as a brand new company. my Bexar blade was hitting the rear stand off and they warrantied the knife replacing the entire thing and the new one I got was great. I also got the Rockwall with the golf ball pattern and that one came sharp with no issues. I know you'll put an edge on it but they would benefit from the feedback about what happened and about the flip. Mine actually ended up bending up from going in and out the pocket so I'm going to DM them on IG in hopes they can improve. Looking forward to more on this one though. Enjoy the rest of your day off
I want a dog! 😁 Beautiful scales! ♥ I'm getting a para3. And slowly going to mod it. Don't know how long it's going to take me. Finding parts I want can be hard to find in Europe.
That’s interesting…the only magnacut I have is on a couple Spyderco mules and they’re not particularly burry knives…you can feel when you’ve turned your edge but it’s not that wiry, k390 style burr. I think they’re also softer than 61 which only deepens the mystery. What do you do to 61 magnacut at the factory to achieve that result…it brings overheated edges into the question, too.
These scales look awesome!! I lost my PM3 LW a few weeks ago, and was about to purchase an s45vn PM3, but now these scales are making me reconsider my choices… what would you recommend?
Think about what she said, and remember she loves her some FRN. So that’s REALLY saying something! I just picked ordered a set for mine to fix my pocket clip situation.
My rockwall (magnacut) also came with a fairly poor edge. On top of that, due to the low "height" of the blade, even though the stock is fairly thin, it is quite thick behind the edge and the primary bevel angle was quite high considering (I seem to remember something like 22dps). After sharpening, I brought it down to about 20dps and it does OK, but the geometry of this knife just isn't great. Bringing the angle down further would have really brought the bevel up the side of the blade and I didn't want to go there. Otherwise, it's a lovely knife (I'm not nearly as down on it as I'm sounding).
Same observation here, except I like a 15° edge angle, which looks RIDICULOUS on the Rockwall's thick bte blade. As far as the clip goes, I actually like it. It works well and I think it looks nice. The thumb studs, OTOH, absolutely suck. They're too short, sharp, and access to them is too restricted. Recipe for pain.
@@BladeLabMiami hah, I don’t mind the clip or stud, but the liner lock is a pita! Closing this thing is not easy! I just kind of shove my thumb in and hope. Gigity!
NIce Ruffwear "T"......Cody V. just got his new ensemble today! SHARPEN THE KNIFE! I prefer to put my own edge on......always 15 degrees. Currently taco dip......no Cheetos. lol
Hahahha, I gotta laugh at the clip thing. Idk why but it seems like youre right, its like some knife companies make these cool products but then get to the clip and just say "eh, we've done enough throw a standard clip with no thought put into it on there".
The only Tactile knife that has caught my attention is the Archer. Just picked one up, it is really nice! Not to mention... it is an absolute laser beam... Would be curious your opinion!
I guess they have high demand and try to get them out as fast as possible by taking some shortcuts. Mine came with a great edge. I got it in February. Or maybe I was just lucky.
I have heard bad things about Tactile’s QC, and that has scared me away from them. Feels like they sent nice samples to reviewers, then skipped QC all together for everyone else.
im one of those pricks that licks stamps or what ever it is you said that has knafs that i dont use..... they are one offs and i get enjoyment at just looking at them and knowing they are awesome..... but on another note i do feel that about being pissed when you get a knife that isnt sharp out of the box....... one that comes to mind is my microtech ultratech d/e..... i was sooo disappointed..... to be fair they have stepped their shapening game up a ton since then as i got a stitch and msi from them that were stupid sharp out of the box..... possibly some of the sharpest blades ive had from the box.... no need to strop or anything.... they were ready to get to work
omg I have a regular s45vn Para3 on order. now with these scales I have a reason to buy the Para3 LW with a SPY27 blade. Not a real reason more of a compulsion I shouldn't really indulge.
Currently having edge problems on my maganacut Bexar. It won’t cut worth shit. And this is a REPLACEMENT for a 20cv version I had issues with from their warranty department 😐
First time viewer, wow I did not know who the bitches and ho's were until later in video. I assume peanut gallery is your viewers, had not heard that term since I was a kid ! I have my first Rockwall on the way. Informative video, thanks for the effort.
You definitely got a bad edge. It’s a shame on such a nice knife too! My Rockwall came good and sharp. I didn’t think you would like the clip either. It seems like the type of knife you wouldn’t buy for yourself because it’s not your style. I get that. I have two distinct pocket knife styles. All of them should cut though like you said. My two styles are; hard work outdoors and refined slightly fancy but still highly functional. The Rockwall is in the second category for me. Bearings and the understated clip along with the compact profile and high quality finish and also the functional blade shape make it pretty ideal in its category for me. I also like the Spyderco Squeek in titanium scales and ElMax blade for this role. I mean slacks at a wedding or out to dinner or a meeting with my boss or I am the boss where I want to dress classy and still be prepared. On the topic of bad edges, they suck! I have had to sharpen several new knives to satisfy my standards. It kind of sucks but in the grand scheme of how many times I plan repeat it it’s just a drop in the bucket really. For example, I have ordered kitchen knives where factory is optional because they know you will want your own edge on it anyway. All the Opinel knives I received had a bevel and no edge. There was no bur either. They were all sharp in a few strokes though. That’s how I’ve come to see all knives. Still I like it when they are super sharp to start with. That’s only really happened twice; the previously mentioned Squeek and a Hogue. Final breakdown is you are totally right that Tactile should be embarrassed sending out a half sharpened blade! I hope it doesn’t ruin your experience and you can enjoy it once you get it laser sharp!
I have a Rockwall coming my way. Thanks for the heads-up about that shitty factory edge and clip 👍😄 great to hear there is some good developments. Signing off, Hos truely 😂😂
It is possible to do but to normalize the steel and redo the whole process to a steel that was already heat treated isn't worth it at all for cost and time. And you gotta be very good at that sort of thing to be successful because it's not easy to do.
@@chriswebb3018 thanks Chris...8 figured it would definitely take knowledge of the steel and sure while 60/61 is not the best RC for magnacut it should still perform at the lower numbers...and I am not a heavy user by no means just an enjoyed of all things knaf related....👊🔪👌🇺🇸
No, I asked if he'd do it on my 20cv grip and he said he's concerned about warping the blade. It's a pain to reheat treat a knife blade that why it should be done properly from the factory.
OK so I had the exact same problem ......my knife didn't even have the edge for butter. I sent it back and I'm literally splitting atoms. I think they need to spend more time on edge QC
I’ve handled the quite carry waypoint, not the same knife. Factory edges are generally atrocious, it’s a bummer that they sent that out the way it was. Pocket clip isn’t great, I also have monkey hands.
OMG!!! I thought I was the only one who had an issue with the factory edge on my Tactile Knife Rockwall Golf. The worst factory edge I’ve ever seen. It took me two to three hours to get a decent edge using my KME sharpener. I sent Tactile an email and never received a response from customer service. Should have spent my $330 elsewhere.
i've never watched you and in my first 60 seconds i get a middle finger AND a f*ck off! LOL! Yaaaaassss! You even burned your dog! i'm gonna love this channel!
@@ericasedc did the ball bearings escape the dirt from your, ahem, tactical weed eating? Or is this a little more proof that ball bearing knives really do need to be coddled?
Great Video. I haven't been able to buy as many knives ever since Biden became President. Please people pray Trump runs in 2024 so we can go back to buying extra stuff again :)
Definitely abuse your knives. What fun is playing it safe so nothing happens when you can find the limits of that particular blade.
True G!!! Very true. SMASH THEM ALL!🤣
No filters, no holding back, no sucking up, no phoniness, no pretense, stunningly irreverent, and all wrapped up in a take no prisoners charm. I love you.
Mine is currently back with Tactile for warranty work because while I was doing the testing on mine the lock failed from just thumb pressure on the spine and almost cut the shit out of me so I sent it in. I also have a flipper Rockwall in XHP but I haven’t had any problems with it’s lock slipping or failing so hopefully it’s not a common problem. Well if I had cut the shit out of myself during my video at least it would have been good content lol definitely glad I didn’t. Well I hope your having a great day talk to you later.
Ooooh lock problems suck!
Love that you pushed, punished and punushed ed ed the knife!!! 👏🏻 Great video, tell all the puppers hi for me. 🥰
I received the Knife Center Rockwall as a Christmas present. You are spot on regarding the factory edge. A knife that cost over $300 should have a better edge. I did re-sharpen with my WorkSharp system and all is good. Thanks for videos. Greta job! Subscribed
So I have come to wondering if a diamond stone, a couple ceramic stones, & a strop would make sense for the processes of sharpening. What do you guys think about that strategy?
I was about to order a rockwall , that’s what brought me here, but you are so right about that pocket clip . Stopped me in my tracks...
It totally sucks! Haha
Get a QC waypoint. They are in stock, several configurations
I think the pocket clip is really good. Especially in a country where edc a knife isn't really socially acceptable. Discreet and short. Holding the knife in place. And a not typically pocket knife style of a clip, so it's not screaming "I'm wearing a pocket knife"
Its ok, I thought it was a bit of a hotspot and the ramp wasn’t good enough to easily put it back in a normal pocket. But its ok.
Thanks as always for the updates and reviews. Any indication at this point when the AWT scales for the Para 3 LW will start to be available for us normal folk? :)
They’re up today! Right now!
@@BumbleBeeedcYT Hey, you are absolutely correct! I was not looking at my P3 LW close enough. Ordered! Thanks for the note, it made me take another, closer look.
I like my Rockwall but it has had to be sent back for warranty 3 times already. I think they have good design, Great skill at precision milling but really lack in QC.
Dude agree with that 100%
Mine has had no issues (Cpm 20CV). Came razor & no QC issues. Wish it was a frame lock, instead of a liner lock, but that’s just my preference.
Came for the shit talk, stayed for the doggos. Them some cuties.
Those AWT lw skinny scales look bad badass !! Thanks for sharing 👊
I cut a plastic hanger with one of my folders yesterday (budget steel.) You've of been proud. I use (& care for) all of my knives. I just don't have much to use them for. But I do use them all (or would if I appreciated some of them enough to pocket them. Gotta get rid of some 😅)
That’s crazy that they sent you a knife with no good edge 😂 Hopefully they fix that issue. Those scales are soo awesome though I love my AWT scales too!!!!
I’m surprised that passed their QC.. my blade in magnacut came in screaming sharp. I’ve been beating the shit out of it. It’s only at 61 HRC, but the edge hasn’t needed much besides a quick strop. That sucks though, because the Rockwall is a sick knife!
For the record I was not eating Cheetos while watching your video I was drinking a beer. No I will not put that down lol. That para 3 looks sweet, I’m not usually into coated blades but that setup is pretty badass.
I love this comment 🤣
Looking forward to hearing about your new job.
I have three tactile turn knives and they are all perfect.
Lucky duck!
Yeah they do need to grow and improve their QC process. To be expected as a brand new company. my Bexar blade was hitting the rear stand off and they warrantied the knife replacing the entire thing and the new one I got was great.
I also got the Rockwall with the golf ball pattern and that one came sharp with no issues.
I know you'll put an edge on it but they would benefit from the feedback about what happened and about the flip. Mine actually ended up bending up from going in and out the pocket so I'm going to DM them on IG in hopes they can improve.
Looking forward to more on this one though. Enjoy the rest of your day off
I want a dog! 😁
Beautiful scales! ♥
I'm getting a para3. And slowly going to mod it. Don't know how long it's going to take me. Finding parts I want can be hard to find in Europe.
That’s interesting…the only magnacut I have is on a couple Spyderco mules and they’re not particularly burry knives…you can feel when you’ve turned your edge but it’s not that wiry, k390 style burr. I think they’re also softer than 61 which only deepens the mystery. What do you do to 61 magnacut at the factory to achieve that result…it brings overheated edges into the question, too.
Burnt to a crisp 🤣
@@ericasedc
🤦♂️
My rockwall arrived today with a 25dps edge on it😂😂.
Luckily I love sharpening knives and immediately put a 16 dps on it
My blade came almost completely dull from then and their sharpening choil is garbage.
These scales look awesome!!
I lost my PM3 LW a few weeks ago, and was about to purchase an s45vn PM3, but now these scales are making me reconsider my choices… what would you recommend?
Buying another PM3LW then getting these scales 🤣
@@ericasedc
That’s so interesting! Any specific reason for this recommendation? Or is it more of a personal preference?
@@TheRonybala I think this build is the most rugged but light weight version of the Para3 you can get! In it’s best form.
Think about what she said, and remember she loves her some FRN. So that’s REALLY saying something! I just picked ordered a set for mine to fix my pocket clip situation.
@@ericasedc
Thanks! That’s a very strong point.
I assume you’re talking about the Spy27 version, not the CTS BD1N, right?
My rockwall (magnacut) also came with a fairly poor edge. On top of that, due to the low "height" of the blade, even though the stock is fairly thin, it is quite thick behind the edge and the primary bevel angle was quite high considering (I seem to remember something like 22dps). After sharpening, I brought it down to about 20dps and it does OK, but the geometry of this knife just isn't great. Bringing the angle down further would have really brought the bevel up the side of the blade and I didn't want to go there. Otherwise, it's a lovely knife (I'm not nearly as down on it as I'm sounding).
Same observation here, except I like a 15° edge angle, which looks RIDICULOUS on the Rockwall's thick bte blade. As far as the clip goes, I actually like it. It works well and I think it looks nice. The thumb studs, OTOH, absolutely suck. They're too short, sharp, and access to them is too restricted. Recipe for pain.
@@BladeLabMiami hah, I don’t mind the clip or stud, but the liner lock is a pita! Closing this thing is not easy! I just kind of shove my thumb in and hope. Gigity!
NIce Ruffwear "T"......Cody V. just got his new ensemble today! SHARPEN THE KNIFE! I prefer to put my own edge on......always 15 degrees. Currently taco dip......no Cheetos. lol
Hahahha, I gotta laugh at the clip thing. Idk why but it seems like youre right, its like some knife companies make these cool products but then get to the clip and just say "eh, we've done enough throw a standard clip with no thought put into it on there".
Dude YES!!!! I don’t understand!
Do you have any plans to review the benchmade redoubt?
Possibly!
The only Tactile knife that has caught my attention is the Archer. Just picked one up, it is really nice! Not to mention... it is an absolute laser beam... Would be curious your opinion!
Looks slicey!
The dogs are so present, I’d swear I can smell them! Lol.
They’re a riot!
I guess they have high demand and try to get them out as fast as possible by taking some shortcuts. Mine came with a great edge. I got it in February.
Or maybe I was just lucky.
My cat could take care of those annoying dogs for you! Seriously, my cat is a furry little street thug; he murdered an opossum a few nights ago!
Can you throw closed captions on your videos? Sometimes I want to watch while others are watching TV or at work.
Lemme see if I can figure that out for ya!
@@ericasedc I think it's just a check box when you upload.
@@OreoDave thank you- I will look into that!
I have heard bad things about Tactile’s QC, and that has scared me away from them. Feels like they sent nice samples to reviewers, then skipped QC all together for everyone else.
I had 2 rockwalls and 2 bexars they all came very sharp..
Yeah I haven’t heard the best things either haha
@@ericasedc cursed images of rockwalls with no edge ground on flash through my mind.
Ball! Throw Ball! No throw ball? We steal knife. Adorable. Also how tf did you know I was eating cheetos? Mmmmm flamin hot goodness.
Ball is life! Apparently Cheetos are too🤣
You have an amazing personality. Like the way u started the vid was amazing 😂
I enjoy entertaining you guys! 🤣🥰
im one of those pricks that licks stamps or what ever it is you said that has knafs that i dont use..... they are one offs and i get enjoyment at just looking at them and knowing they are awesome..... but on another note i do feel that about being pissed when you get a knife that isnt sharp out of the box....... one that comes to mind is my microtech ultratech d/e..... i was sooo disappointed..... to be fair they have stepped their shapening game up a ton since then as i got a stitch and msi from them that were stupid sharp out of the box..... possibly some of the sharpest blades ive had from the box.... no need to strop or anything.... they were ready to get to work
Right before you said it, I said, “she’s gonna steal your knife”. Probably not a good dog toy, but if she had thumbs, she’d fidget.
happy early birthday!! mines on Sept.3rd!!
61 HRC Magnacut sounds really bad for a folder, That’s what turned me off interested to see how it performs.
Love the clip...😂😆🤣♥️🙏🏻🇺🇸
I wear gym shorts most of the time...desert living. Clip works great for my intended purposes!
Where can you send a knife for you to test?
Mars🤣🥰
omg I have a regular s45vn Para3 on order.
now with these scales I have a reason to buy the Para3 LW with a SPY27 blade. Not a real reason more of a compulsion I shouldn't really indulge.
We love the dogs too. Don't get mad at them. Oh yea, and the knives are really cool also.
That dingy gross blade looks beautiful!!
Currently having edge problems on my maganacut Bexar. It won’t cut worth shit. And this is a REPLACEMENT for a 20cv version I had issues with from their warranty department 😐
Fantastic! 🤣🤦🏻♀️
@@ericasedc Just posted a video on it...hopefully my second warranty experience is better...
First time viewer, wow I did not know who the bitches and ho's were until later in video. I assume peanut gallery is your viewers, had not heard that term since I was a kid ! I have my first Rockwall on the way. Informative video, thanks for the effort.
Those dogs are way to cute, bop those noses for me lol
You definitely got a bad edge. It’s a shame on such a nice knife too! My Rockwall came good and sharp. I didn’t think you would like the clip either. It seems like the type of knife you wouldn’t buy for yourself because it’s not your style. I get that. I have two distinct pocket knife styles. All of them should cut though like you said. My two styles are; hard work outdoors and refined slightly fancy but still highly functional. The Rockwall is in the second category for me. Bearings and the understated clip along with the compact profile and high quality finish and also the functional blade shape make it pretty ideal in its category for me. I also like the Spyderco Squeek in titanium scales and ElMax blade for this role. I mean slacks at a wedding or out to dinner or a meeting with my boss or I am the boss where I want to dress classy and still be prepared.
On the topic of bad edges, they suck! I have had to sharpen several new knives to satisfy my standards. It kind of sucks but in the grand scheme of how many times I plan repeat it it’s just a drop in the bucket really. For example, I have ordered kitchen knives where factory is optional because they know you will want your own edge on it anyway. All the Opinel knives I received had a bevel and no edge. There was no bur either. They were all sharp in a few strokes though. That’s how I’ve come to see all knives. Still I like it when they are super sharp to start with. That’s only really happened twice; the previously mentioned Squeek and a Hogue.
Final breakdown is you are totally right that Tactile should be embarrassed sending out a half sharpened blade! I hope it doesn’t ruin your experience and you can enjoy it once you get it laser sharp!
Am…. Am I? Am I getting to you? 😂 torture testing?!? 😱 😍
You’re awesome. Great video 😃
Thank you! I also can’t stand the rockwall clip but for other reasons. I would actually prefer it without the cutout.
Talk to them about Native 5 LW scales. Seems like it be about the same. Im on my 4th set of AWT scales n dont plan on stopping!
I'll take the Tactical rockwall if you hate it that much 😁🤞
I bought mine from rec it was perfect great customer service.
I have a Rockwall coming my way. Thanks for the heads-up about that shitty factory edge and clip 👍😄 great to hear there is some good developments. Signing off, Hos truely 😂😂
Both you and the dogs made me laugh here. 😅
I've gotten lucky w Tactile.. my two knives have had good edges.. I've seen a few vids where they are AWFUL though.. they need tighter QC
I wonder if Brian @transparent knives could reheat and temper to a harder rockwell. Prefer about 63/65 maybe.
It is possible to do but to normalize the steel and redo the whole process to a steel that was already heat treated isn't worth it at all for cost and time. And you gotta be very good at that sort of thing to be successful because it's not easy to do.
@@chriswebb3018 thanks Chris...8 figured it would definitely take knowledge of the steel and sure while 60/61 is not the best RC for magnacut it should still perform at the lower numbers...and I am not a heavy user by no means just an enjoyed of all things knaf related....👊🔪👌🇺🇸
No, I asked if he'd do it on my 20cv grip and he said he's concerned about warping the blade. It's a pain to reheat treat a knife blade that why it should be done properly from the factory.
8:13 the infamous hot take
I need those scales.
Yes you do!
OK so I had the exact same problem ......my knife didn't even have the edge for butter. I sent it back and I'm literally splitting atoms. I think they need to spend more time on edge QC
I absolutely agree!
Hahaha, I’ve been told I have good timing.
I’ve handled the quite carry waypoint, not the same knife. Factory edges are generally atrocious, it’s a bummer that they sent that out the way it was. Pocket clip isn’t great, I also have monkey hands.
The dogs are in fine form today!
They really are 🤦🏻♀️🤣
Déjà vu… TRM all over again? (Maybe they’ll listen to you and TT will tighten up QC!!
Fuckin subscribed. Send your knife to Josh at REK Knives if you want it to cut. I don't own any Medfords.
Thanks for watching and for the support!
The Dogs are too funny, Junkies for Mom love....
OMG!!! I thought I was the only one who had an issue with the factory edge on my Tactile Knife Rockwall Golf. The worst factory edge I’ve ever seen. It took me two to three hours to get a decent edge using my KME sharpener. I sent Tactile an email and never received a response from customer service. Should have spent my $330 elsewhere.
Great doggoes.
The weed looks like goldenrod and mugwort.
Ahchoo sniffle
i've never watched you and in my first 60 seconds i get a middle finger AND a f*ck off! LOL! Yaaaaassss! You even burned your dog! i'm gonna love this channel!
WELCOME ABOARD!
Nice birthday present 💝🎁🗡️
The waypoint isn't us-made
I’m aware haha it’s Taiwan (:
The burr on that Rockwall is an embarrassing mistake by TKC.
For $299 that should not have passed QC
@@ericasedc absolutely. And really the HRC should be 63 at that price too.
@@ZPositive truth 100%!
@@ericasedc did the ball bearings escape the dirt from your, ahem, tactical weed eating? Or is this a little more proof that ball bearing knives really do need to be coddled?
@@ZPositive I don’t think any dirt got into the bearings surprisingly!
SHE IS SMART WANTING ONE OF HER OWN
🍕
ayeeee filter is out the window hell yeah
like the good ol days
@@danielwasused WE’RE BACK BABY!!!!😵😵😵🤣🤣🤣☠️
@@ericasedc HELL YEAHHH
Thanks dude!
❤️🧡💛💚💙
Great Video. I haven't been able to buy as many knives ever since Biden became President. Please people pray Trump runs in 2024 so we can go back to buying extra stuff again :)