DIY Electric Scooter With 75100 Foc High Voltage and High Current| Flipsky
HTML-код
- Опубликовано: 24 сен 2021
- 75100 foc:flipsky.net/collections/elect...
Hi guys, this is the second video about 75100 foc built on an electric scooter. Max speed reaches40km/h, average speed 25km/h and cruising 35km. Btw, we will ship all the esc 75100 foc in black.Thanks for all your favor ~
Follow Us On Social Media,thanks!
/ flipsky_tech
/ flipskytech
/ flipsky_tech
#vesc
#flipskyesc
#75100foc
#diyebike
#diyelectricskateboard
#diyescooter 
Хобби
![Chk Chk Boom - Stray Kids ストレイキッズ 스트레이 키즈 [Music Bank] | KBS WORLD TV 240719](http://i.ytimg.com/vi/63QPwqCRGcw/mqdefault.jpg)
Does this come with bluetooth, or just the uart connector for a bluetooth module? Programming vescs with the vesc app and bluetooth is so easy compared to the pc version, so much faster and much handier for viewing data. Bluetooth modules are cheap and I think it would be great to include them with your boards, even if you have to pay $20 more for it
The ESC itself does not come with Bluetooth, it can only be connected to the Bluetooth module through the UART port， thanks!
@Shep VanDelay lol bluetooth vesc tool is night and day easier to use. You can monitor data in real time on your phone and change settings in seconds. Kinda hard to do that with a laptop plugged into your vesc while you're riding
Hi.. can i connect 2 of this for a dual motor setup and then connect this two FLIPSKY 75100 FOC to a gt-100 display for odometer and battery percentage purposes?
I’m planning to use this on my xiaomi m365 pro with dual motor (1600w x 2) with 72v battery.
Hi yes, just connect two 75100 by a canbus wire,and then connect the display to show data. But our TFT display or Benjamin serial protocol display are supported only.
@@FlipskyTech where i can buy your display then? Can i have a link for me to buy it. Thanks!
Great choice of music! Which version of bluetooth module will work with this? v4 or v6?
Thanks, V4 connect port 3, and V6 connect port5, please see the wires conneciton wires in our website:flipsky.net/collections/electronic-products/products/flipsky-75100-foc-75v-100a-single-esc-base-on-vesc-for-electric-skateboard-scooter-ebike-speed-controller
How do you turn this on and off?
If I plug this into a battery through an xt90, it is always powered on?
I have a button switch like in the video, but it's just a button and 3 wires, it doesn't have that black box in between the battery and vesc power wires. Can that be plugged into to the other cables? Or will it not work.
Hi Friend. This esc doesn't come with power on/off switch or anti-spark switch, so you need an external anti-spark switch. For other power on/off switches, please check the internal circuit to make sure the compatibility. Thanks.
Greetings! Ive just bought an 75100 but Can you please Tell me how you Connected the Hall Wires? (By color)
An Please the Same for the Throttle and Brake??
Hyped Greetings From Germany.
Good morning sir. Maybe you can go to our product details page and pull down to see the detailed wiring diagram. It also contains the part of Throttle and Brake
Here is the link: flipsky.net/collections/electronic-products/products/flipsky-75100-foc-75v-100a-single-esc-base-on-vesc-for-electric-skateboard-scooter-ebike- speed-controller
Hi Flipsky! my controller works fine in bldc setting, however when I run in foc mode, the controller disconnects itself when doing the setup. Any ideas why? Im using the mototec 48v dirt bike motor?
Please check if the USB connector is loose, If not it is maybe interference with the USB cable caused the disconnection. You can try using another USB
Can this controller run a led headlight? Or do I need additional hardware? I have a ebike light which supports 12-72v.
The 75100 is 5V output, so the light cannot work if connect to the esc. But you can connect the lights to the power supply.
does uart and bluetooth work at the same time? can i connect bluetooth on tx2 and rx2?
Yes, two COMM ports here. UART bluetooth module, IMU,screen display or remote controller are supportable.
how do you connect the different motors? the wiring is small like the motor hall and the throttle wiring is small connector
The Yellow, Blue and green wires on the motor controller are phase connections. Like the main power input wires on the 75100, They intentionally leave them unterminated so that you can solder on an appropriate connector (e.g MT60 or MR60) or or solder the motor phase wires (which should be the same colour) directly to the motor controller.
Besides that, they have an additional connector labelled "HALL" which is used to connect the hall sensors. this also has the same colour coding as the motor phase wires as there is a sensor that corresponds to each phase position, plus a black, white and red wire.
black: ground
White: Motor temperature sensor (if applicable)
Red: +5 volts
How can I achieve good starting torque with this VESC and a hub motor? I have played around with the settings, but it always takes quite a while to speed up.
Hello,sir. May I know is your hub motor a sensorless motor? What control mode is used? And can you adjust the starting current and throttle curve? Also,you can send email to our after-sales service mailbox: flipsky-service@outlook.com.Our staff will help you.Thanks for your support.🥰
Lol, if only it was that easy 😫🤪🤣
Hello,Pls feel free to contact us if you have any problems during use.
Can this work plug and play with ninebot MAX scooter. Will my dash and all the connections work with it?
Ninebot can use with 75100 but screen can't .The screen serial port protocol needs to be Benjamin before it can be used.
Hey i see an adapter between the vesc to the scooter with power button do you have link for that ?
Here is link:flipsky.net/collections/anti-spark-switch
every time I speed up my bluetooth disconnects. What can it be?
Can i use on an ebike 48v 2000w motor ?
And wich screen i can place for the speed display ?
Pls make a tutorial vidéo
Yeah, 75100 supports your motor. As for the speed display, this one is recommaned:flipsky.net/collections/tft-screen/products/tft-screen-ver2-module-based-on-vesc
Is that tft open source?
No, it won't work with your ebike 48V 2000w unless you are good to soldering.
Connectors are not the same.
You had much better buy an ebike controler, it's not more expensive.
Can you explain me the difference between Flipsky 75100 and FSESC6.7? Is the 75100 older design?
The voltage and power they support are not the same, 75100 supports higher voltage than v6.7.Detailed specification information can be viewed on our official website：flipsky.net/collections/electronic-products
Nice vídeo
Thanks bro!
idea to install this in small kids car. model is YSA021. car Weight is 70kg plus person could be total of 180kg. using differential with 1:10 ratio. currently I am using no name brand controller with 42amps at 48v system and is working well. will this controller handle such a application?
few others telling me to consider closer to VESC 100250.
what are ur thoughts?
Hi, please check your motor current with the controller. It will be a good assembly with fsesc75100 if your motor current is less than 100A, this 75100 is just fine; if the continuous current needs to exceed 100A, then use fsesc 75200:flipsky.net/collections/electronic-products/products/flipsky-fsesc75200-75v-high-current-200a-esc-base-on-vesc-with-aluminum-heatsink-for-e-foil-fighting-robot-surfboard-agv-robot-arm
@@FlipskyTech I know someone that yesterday motor with VESC and stated that it can take up to 118A. is it just possible to limit the current in settings? like 90amps....
@@robertkawalec2001 Yes available.Just set up in vesc tool:Motor settings-General-Current-Motor Current Max(90A)-Motor Current Max Brake(-90A), then input.
Max power loss 75w
Openloop erpm 300
Sensorless erpm 2000
Motor poles 46
what does this mean and what values to write, we have two 3500 watt motors with magnets 60mm long? the scooter rides poorly, battery 20s 62ah?
Automatic parameter setting is ok.
will this one require anti spark switch for safety?
Yes, it's better to connect an anti-spark switch for safety. You see we add one in the video .
Does this support bldc like your other vescs?
No, only for foc. That's why we call it fsesc75100 foc.😉
are mm different in china. that wheel is 254mm or 10"... why did you setup the adc input all crazy, why not current control no reverse adc2 brake?
Hello, Sir/Madam, we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com or click online support at the bottom of our official website. flipsky.net/pages/faqs?contact%5Bcontext%5D=footer&contact%5Btags%5D=prospect%2Cnewsletter&form_type=customer#newsletter-footer
why do you market it as 100 amp if it can only output 550 watts, according to what you said in the comment section? I bought two for my dual 2800 watt hub motor scooter, and was expecting to be able to use them at 84v, and around 50 amps
Hi, the fsesc 75100 focs 100amp in our website , right. The 550W in the comment refers to the scooter motor max support 550W. And 75100 can perform well in your build.It can be used if the ESC current has bigger current than the motor has.
@@FlipskyTech thank you
Is it necessary to connect the power wires to the motor by color?
I'd advise you do as a lot of motor controllers will either spin the wrong direction or have trouble spinning up smoothly during phase detection if you don't connect them according to the colour of the wire. This is even more apparent with motors that have a hall sensor configuration to allow a smoother field-oriented control (FOC) drive mode.
can I have a balance and bluetooth IMU together?
Yes friend.
Hi, can I hook up the rear or front lights to the controller?
Hello sir. If you need an external light, we recommend that you connect it from the battery input terminal and connect a step-down module to supply power to the tail light. Since our BEC specification is: 5V1A, if the power of the external light is too large, it may burn out the ESC.
Hi is it possible to use the original ninebot G30 dashboard/dispkay?
Hello Sir, 75100 cannot be used with the original display because the protocol is different.
does all your bldc motors use vesc tool?
can i purchase your motor and use my ESC and without vesc tool?
Hello sir, the use of motors is not limited to VESC systems, our motors can be used with most ESCs on the market.
thanks sir.
what is the maximum weight can 6374 160KV carry?
@@doktadambel9269 Hello sir, what equipment are you using? The motor does not have the data of load weight, but the motor has torque data.
I am using two equipment. a homemade jeep of 1 tonne in weight to carry a capacity of upto 1 tonne. total load to be 2.5 tonnes, and a homemade e-bike of 60kg weight to carry maximum of 500kg load capacity.
@@doktadambel9269 Hello sir, I checked with the engineer.
It is feasible to use it in the electric bicycle project, please confirm the transmission ratio of the project. As long as the transmission ratio is not too low, it can be used.
For the Jeep project, the power and torque of the 6374 motor may not be able to support such a large load.
can i connect bluetooth on UART2?
Yes bro, see wiring diagram in our website please:bit.ly/3Bkk9qk
@@FlipskyTech I've already followed the diagram and it didn't work! tx2 and rx2 do not work for bluetooth or IMU! only the COMM port that has rx and tx that work. maybe there's some way to work that I haven't figured out yet. need help! in a question I asked, I was informed that it would work bluetooth and IMU at the same time because it provides two more ports.
@@lucaskuster7771 The TX and RX positions on the comm port are not the same as those on uart2. If you use uart2 to connect to Bluetooth, please exchange the Bluetooth tx and rx wires.😄
Hi, from the website i see that now the firmware can be updated, so can i directly from vesc tool?
The new 75100 can be updated , but the old version still not .
@@FlipskyTech So we users who have trusted, should buy the new model and use the old one as a paperweight, all this after a short time after its release, sad story.
@@fradpl Really sorry for that , but the products are always updated, thanks for your understanding☺
Does it support sensor less motors?
Yes available , bro!
can we see the inside of the esc? without seeing the PCB quality I cant justify buying one.
Hello. It's based on vesc 75, with 6 MOS MDP10N027,MagnaChip, max 84V. The PCB pictures will be showed later.
ruclips.net/video/KfIfJMP_Vgk/видео.html ;)
why speed thd video up at the end?
Where do you connect the brake cable and how do I wire the dual motor button. Thank you
Hello sir, the FSESC 75100 version shown in the video is a single-drive ESC that can only control a single motor.
If you want to connect to the E-scooter for use, the brake is generally connected to the ADC interface (ADC1 controls the throttle; ADC2 controls the brake). If it is used on a skateboard, we generally control it through the remote control.
@Flipsky Tech I have 2x 75100.vesc and 2x hub motor I will use dual switch and key alarm
Did all that it says detection failure hall senor not detected and it’s flashing blue and red what that mean need help
Could you pls send how the esc light on to flipsky-service@outlook.com, we will check and help , thanks!
what is the top speed? i cant get mine to spin it works in detect but thats all pls help
Hello, Max speed reaches40km/h, average speed 25km/h, and cruising 35km.You can take a look at this parameter setting video: ruclips.net/video/JexI1THU3Z8/видео.html , hope it will help you
Can you guys make a Video for the niu kqi3 please?
Im trying my best for making a good firmware for kqi3, max base speed its 33-35 i reached 40 with field wakening but its very rude to drive, my motor jumps some times and the temps are high
@@miguelangelmxdz3861 so we dont need the Controller?
@@Toelle74 yes im making this with the flipsky 75100 original controller can be keeped for keeping dashboard working
I also want to study Benjamin's UART so i can try decrypt with mitm so flipsky can understand it
@@miguelangelmxdz3861 what do you think, how long do you need?
Any Bluetooth?
Yes, here is link : bit.ly/39quKrD
Does this support sw900screen?
The screen's serial protocol needs to be Benjamin,75100 only support Benjamin.
Hello. I set up my flipsky 75100 right now. Everything seams to be working so far. My only question is how to set up cruise control. Or not possible?
Good morning, may I ask what remote control you are using
@@FlipskyTech Good morning. An ebike thumb throttle.
@@ebikebrasil Refer to this connection method to set the cruise mode, connect a self-locking switch or the switch on the picture with TX and GND, and then connect TX to GND when driving the accelerator.
drive.google.com/file/d/18qOOdxoQrBSRaPoK0G82cvD7HoevfWoO/view?usp=sharing
@@FlipskyTech okay thanks. I will try that.
@@ebikebrasil Okay Sir，If there is something you don't understand, you can also take a video or send a picture to our after-sales email: flipsky-service@outlook.com
Our after-sales staff will reply to you as soon as possible
Hello, how can i connect ON/OFF switch
Hello sir, do you want to connect the switch button to control the switch of the ESC? The FSESC75100 in the video does not have this function. You can control the ESC to switch on and off by connecting a spark switch to the power interface.
Can you adjust the watts on what is the max
Motor specification max 550W , so can't adjust to higer watts, friend. That depends on your motor.
@@FlipskyTech Why is it max at 550W? 14v times 100A is 1,400W
@@crispysocksss The maximum power of this motor is 550W. The esc can be used as long as the current of the esc is bigger than the current of the motor.
Is the only way of switching off and on the controller to use an anti-spark switch? Or can I use the key switch on my scooter to switch off and on the controller?
Yes friend, the only way to turn on / off the fsesc 75100 is to add an anti-spark switch. The key switch on scooter cannot help .
@@FlipskyTech will you make one day, the version with the ignition and a 12v auxiliary output?
Is this water resistant? We might want to use this for our performance scooters that we sell. It looks very interesting and high quality.
Hi, it's not fully waterproof,but it's good esc for scoooters.
@@FlipskyTech Could you make it water resistant please? It shouldn't be very hard. The specs are amazing but a lack of water resistance is huge. I don't even see any seals or sealant. Would we add water resistance ourselves? Also a plain black box with no branding makes it seem like you don't take pride in your products.
@@timothybrown9762 It's waterproof level is IP54, will it meet your requirement?
@@FlipskyTech It will meet our 'requirements', but we're concerned with the seeming lack of silicone sealing where the wires exit and it doesn't seem like there's any rubber gasket seals for the end plates. Are those missing in the pictures but not the real thing? How is it sealed and protected against ingress?
@@timothybrown9762 yeah, the 75100 isn't watertight. You can make it watertight though with a few modifications while also improving the thermal performance a bit;
1: use a conformal-coat spray on the board. this will produce a water-resistant layer on the board and prevent water damaging it
2: use silicone or rubber gasket material to close off the ends of the controller
3: use clear silicone to seal the little light pipe on the top of the controller
4: infill the wire grommit with silicone also
this at the very least will make the controller more splash resistant and it will be able to handle being run in damp environments substantially better.
While you're in there it could also be worth adding thermal paste to the metal bar that the MOSFETs sit on. this will not only make the side of the controller more water resistant, but it will also transfer more heat from the MOSFETs to the outer casing where it can be dealt with more effectively.
Hi,
I bought Flipsky 75100 75V 100A but it doesn't work :(
I installed Vesc Tool, connected Flipsky controler through USB, everything seems ok, throttle is recognized, but when I pull throttle, nothing happen :(
I spent hours in trying to make this work, without success. I have no solution so far ...
Over $100 thrown away :(
I will put my Turnigy controler back, a much more rustic controller, but that works !
Hello sir.
Sorry to bring you a bad experience, please send your parameter setting interface screenshot and wiring diagram to our after-sales mailbox: flipsky-service@outlook.com Our staff will deal with it for you as soon as possible.
Sorry for the inconvenience.
Is it possible to vary the regenerative braking force with a seperate input.
Can I know the seperate input refers to? Generally, input set support: PPM, ADC, NRF, UART, can set via vesc_tool 3.0, firmware 5.2
@@FlipskyTech ADC for throttle and a separate throttle 0-4v for brakes
@@chrisrathjan1501 You can connect ADC1 with throttle and ADC2 with brake in COMM port
max speed ??
on 1200w motor
Hello, Sir/Madam, we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com or click online support at the bottom of our official website. flipsky.net/pages/faqs?contact%5Bcontext%5D=footer&contact%5Btags%5D=prospect%2Cnewsletter&form_type=customer#newsletter-footer
Is Electric break charge the battery?
Sorry, what do you mean friend?
@@FlipskyTech I mean when braking is the battery charged
Regen breaking.
Can the original dashboard be connected? Thx
Hi, do you mean the TFT screen to show data?
@@FlipskyTech yes
@@iker0304 Yes,of course you can connect the TFT screen
@@FlipskyTech Sorry, i want to understand better, does it work with the display of all scooters? or do you mean the flipsky TFT Screen Ver2?
@@fradpl same question...thay understand what they want
what is the motherboard at 0:22 ?
Hello, Sir/Madam, we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com or click online support at the bottom of our official website. flipsky.net/pages/faqs?contact%5Bcontext%5D=footer&contact%5Btags%5D=prospect%2Cnewsletter&form_type=customer#newsletter-footer
can I install a new firmware?
Sorry no , only support 3.00 firmware
Open source please. That is where you got the hardware and firmware!
Hi, it can work with field weakening?
The latest version of VESC TOOL that has not been officially released has this function.While the 75100 only support 5.0, so this function is not supported.
@@FlipskyTech Thanks for your reply, will it be possible to update in the future? it would be a shame not have this function.
@@fradpl Our engineers are studying this aspect, hope there will be it later.
@@FlipskyTech I agree. Everyone will get this one on the fly if it supports FW!
@@FlipskyTech Thank you so much for the replies, I decided to buy it because I like the project and I want to practice with your products, I hope the engineers will give us good news soon. Keep it up, this is wonderful.
Dont waste your time, it is the same issue like with 7550, wheels are spinning only in the air, not spinning on the ground at all. When connected via canbus you cannot setup throttle because it says all the time to update firmware, but there is no option to update the firmware it is not able to update.
Could you provide us with programming video to see if there is any setting wrong ?I hope to help you solve it as far as possible.
Only 40km/h? For 8000w
Hello, sir. 40km/h is based on the data of our DIY scooter, but is not the top speed. The maximum power of this ESC is about 1500~2000W, not 8000W. By the way, thanks for your message.
@@FlipskyTech only 2000w?
But it says 72v @100amps continuos
Thats 7200w am i wrong?
@@meganguerra-cd9gj Hello, Sir/Madam, we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com or click online support at the bottom of our official website.
The problem is the heat
You can check whether the voltage and current are set too high, and whether the temperature protection is set. Any questions can email to：flipsky-service@outlook.com .
thanks
@@FlipskyTech i want power that is why i bought a 150€ controller
can you swami through Whatsapp to write off with us, do not bother to set up?
Sorry, not understand😁
what is Max voltage for lifepo4 battery?
when fully charged the 72v battery will have over 87v?
what capacitor is used on this controller.
after 1 quick run will probably level to low 80v or even high 70v
Hi friend, the capacitor used on 75100 is 3pcs 470uf100V electrolytic capacitors. And for the battery details, the battery supplier may give more help , thanks!
Almost 8000w of power and only 40km/ha
What a waist
there's no way that oem ninebot max battery can supply enough current at 36v for 8kw..
36V18A without BMS protocol support. That is only 648W which makes it very good. The controller supports up to 72V so that makes it worth the upgrade aswell.
Hello, Sir/Madam, we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com or click online support at the bottom of our official website. flipsky.net/pages/faqs?contact%5Bcontext%5D=footer&contact%5Btags%5D=prospect%2Cnewsletter&form_type=customer#newsletter-footer
Hello, Sir/Madam, we have received the feedback about your professional question. If you need technical support, you can contact our email at flipskytech@outlook.com or click online support at the bottom of our official website. flipsky.net/pages/faqs?contact%5Bcontext%5D=footer&contact%5Btags%5D=prospect%2Cnewsletter&form_type=customer#newsletter-footer