Broken Outside Door Handle? Let's Replace It!!
HTML-код
- Опубликовано: 12 июн 2024
- Easy to use handheld scanner
amzn.to/46nMFrz
Budget friendly, professional style scanner
amzn.to/44iDdUM
Basic Code Reader
amzn.to/3GZFDhT
Blue tooth scan tool
amzn.to/3org3vL
Perfect panel trim tool
amzn.to/40hPshS
Push pin removal pliers
amzn.to/3US2FN7
Excellent beginner plus tool kit
amzn.to/3UY6e4z
Excellent Basic Starter Tool Kit
amzn.to/41JVRn2
Must Have Gearwrench set
amzn.to/3AfZNAc
Power Probe Circuit Tester
amzn.to/3mOrQ6N
Basic Test Light
amzn.to/40mKdNN
@WrenchingWithKenny @SNAFU.performance @traditionovertrend2704 @ktmracingsisters1261 @matersworkshop6123 @MotorMouthRadio #wrenchingwithkenny #keepwrenching #wesselmotorworks Авто/Мото
A basic repair that most DIY'ers can do themselves. Another excellent job!
Kenny it’s going to be a hot summer, do all of us subscribers need to get an equity drive going to get you a nice air conditioner in your shop with Hollywood lighting so you can film inside???❤
I never did like working on door window regulators or door handles , all ways wind up getting slashed on the arms.
Hello Mr Kenny hope y'all had a great day. I'm late watching this but I was kinda busy 😊. Yard work lol. Hello Mrs Kenny, hope you're doing ok. Good night y'all
The vehicle manufacturers have made it much more difficult for the average person to work on their vehicles themselves! Great job Kenny! Prayers for you and your family!!
Kenny, love Real repair videos. I really enjoy your content.
Do you edit out the bloody knuckles ? I couldn’t do that without looking like I got in a fight with my cats!!!!!
Quick tip Kenny for loose screws in plastic add a drop of krazy/super glue on the tip before inserting the screw. Dont have to nuts just a bit of glue will make the screw tight like new when it sets and hardens. Likewise it will break free easily if you have to remove it in the future. Again a little dab on the first thread and it should be good.
I've seen some stuff. I would just go up a size in screws. Another trick depending on what you have, I have seen some use drywall anchors.😱
Just a suggestion but maybe you should put the year and model in the title so it is searchable for future viewers. Might bring more people to the channel as well. Cheers!
I always visibly damage panel aspects, and it throws down my ego for working on the cars considerably. ...it really helps to see the little tips and advice through quips and demonstratives watching a seasoned mechanic work on an unfamiliar model. All those variations become confusing problems for those of us who aren't [very experienced]. They're also parts that are often neglected in service manuals, things like mitchell on demand, and chilton/haynes.
That dang thing was fighting you Kenny. They are a pain I know. At least you had screws, the last one I did was all those stupid plastic clips that always break. I have seen some people do away with the clips and use sheet metal screws. Anyhow good job.
I replaced the door moisture barrier with a shower curtain.
I was going to make a joke in the comments about your long screwdriver But after watching you work with it The next time I have this problem I'm gonna use a long screwdriver!
Kenny, THEY HAVE GLASSES WITH CAMERA IN THEM. Might be worth checking into. Thanks.
Bluetooth
On newer Hyundai's and Kia's, the handle can be removed without having to remove the door panel. It's much easier.
The sheet metal screws holding the door panel go into plastic and already has threads cut in, reverse the screw a little and you can feel the screw fall into the already cut threads. If you just run it in, basically you just stripped the plastic 'nut' . It is all about patience.
That door is fastened better than most
You need a longer screwdriver. Those shorties are no good.
Did that a few times . Seems like it takes forever .
Anybody know how Phillips head screw got its name
How does this scanner compare to the one in your description
LAUNCH X431 CRP919X
Aftermarket....that's never good lol. Ya they are cheaper than OE (if it's available) but never last. We need see some video on that pickup...
Self tapping!
The saying we always used in aviation is beat to fit paint to match. This of course is said not really done.