21 carburetor on Yamaha Jog scooter
HTML-код
- Опубликовано: 6 фев 2025
- The Inparts 21 PHBG carburetor is a copy of the Dellorto 21 carburetor. It works well, you need to tweak it a little more and run in the cylinder, in the next video I want to check the maximum speed.
So sad that you haven't got any good and clean road around your house to exploit all of this scooter. I love your video, no voice but so much to learn about your technique to make think without lot of money, juste with your head and some sweat. Great job 👍👍👍👍👍👍👍
Олег,классный скутер,просто огонь,и главное непегреть...
Совсем другое дело 💪на новых запчастях и,приятно ехать 👍обороты долго сбрасывает как,беднит чутка.102,104 жиклёр попробуй💪😉
Главный жик на это не влияет, нужно винтом холостом в данном случае обогатить. Но ещё детон есть на средних, скорее нужно иглу поднять.
@@josephhitler8828 сам то понял, что написал? Винт холостого хода отвечает за холостой ход, винт качества смеси отвечает за смесь на холостых оборотах, игла отвечает на смесь до 3/4 ручки газа, а только потом идет настройка жиклерами
@@НикитаКириллин-г6х да, ошибся, винтом качества нужно обогатить. Всё остальное я знаю, поэтому и говорю что увеличивать жиклёр нет смысла.
@@НикитаКириллин-г6х жиклеры (главный особенно, холостой в меньшей мере) влияют на настройку в целом на всех диапазонах. Потому меняя жиклер для идеальной настройки порой надо и иглу двигать. Понятно что каждая настройка и каждый двигатель это частный случай.
@@MrDramka я это понимаю прекрасно
*Привет из Юрмалы!Ракета, что тут сказать!Класс!Супер!*
У вас наконец решили отремонтировать дорогу)))
Первый раз, джог доехал домой своим ходом и не прогоревшим поршнем
تمدح ن ش بث بو.
братан это не дио
Después de mucho inventar y toquetear has optado por hacer lo fácil. Eso sí, has aprendido un montón por el camino. Así es como va todo bien
За всё видео не было прихвата и поршень не прогорел! Уже круто!)
Олег ты топ!
Bien ta préparation ,ça me rappelle ma jeunesse 👍👍👍👍
🐱🐶🍯🍯🥰🥰🐕🐈🍁🍁🍁
Нормально Олежка новую поршневую обкатывает))
Нет такого как обкатка!!! Есть притирка, на 2т особого смысла нет. Почему на 2т кросс нет никакой обкатки? Потому что ебнул ебнул и поменял поршень с кольцами через 40-60 часов
@@ЭндуроЗеленодольск Также можно сказать и про 4т двигатель, если зазоры повышенные заложены при расточке.
@@ЭндуроЗеленодольск 15 часов**
@@ЭндуроЗеленодольск прикатка нужна на 2т!
@@ЭндуроЗеленодольск нужно обкатывать, он даже мануал недавно читал, там были инструкции
Back again sir. Always watching your video. I have also my Yamaha jog nextzone .👍
Buenísimo Samo, todo un profesional.
Ну вот и норм карб подехал)) свеча немного богатит но это лучше чем бедность)
Свеча богатит?Это как
nice job, but when you mount a new engine, never used, you must do the break-in ... that is at least 500km in which you do not go fast and you do not open the throttle more than 3/4, even before the break-in you have to do the thermal cycles , at least 3, i.e. start the engine and let it idle until the engine warms up, then turn off the engine and let it cool, this for 3 times, the temperature cycles are used to adapt the piston to the cylinder, I recommend 4% mixture of oil and variator rollers as heavy as possible, so as not to rev the engine too much, remember that if you do not run in the engine will not go well
500km is way too much honestly, for an aluminium cylinder its recommended to do 150km with a lot of heat cycles, a cast iron is something between 250 and 300km
Its aluminium cylinder no need for break in but just do like 100km just to be sure
maby the samodel know what he is doing so you dont have to be like you know everything and what need to do?
hi wrong to write, I meant 200km not 500km, 500 is a lot🤣🤣
You dont need to break in an aluminium cylinder like that. Just heat cycles and little bit of riding
после того, как вы заменили жиклеры, доработайте карбюрацию через выемки иглы и различные винты регулировки смеси и холостого хода, и после того, как вы потянули двигатель, проверьте цвет свечи зажигания, пока :)
Very nice job, it's strong good setup👍♥️
SAMODEL TOP 👍🏽
Więcej tuningu !👍🏽
Samodel you build an great engine its very happy you can hear it
Mi man it's lean, be careful, if you listen when you release the accelerator it bamb bam to high! Much love from italy, suca bliat!
Наконец нормальный карб поставил.
Надо минимум наколенники черепашку одевать. У тебя вес не маленький хоть какая защита будет.а то ты я вижу любишь поэкстримальничить.
Я бы посоветовал тебе сделать вили-тренажор,ты бы запросто с органил и научился бы стантить без риска. В общем видос зачёт!
На ямаху минт подойдет
Looking good, but i think that you have to change your spark plug to BR9HS because the engine is running even hotter when stock (which makes sense since the cc is 70)
a grade 8 is fine too, trust me :)
@@francescomereu682 well, depending on the moped
@@migeez6571 on the minarelli grade 8 is fine on these cylinders and it also depends on the time it is used. it can also be put in grade 9 but it is not essential, hello
Yeap, plus it"s AC which is much hotter than LC, overheated spark plug is not the best thing i would recomend to test :D
Starting from melted miston and till "diesel overrev" when engine works without spark, detonates by overheated plug
If the cylinder is racing then i recommend Br9hs but with sport is br8hs
Se entendió todo con los subtítulos en español, gracias saludos desde Argentina!
Es un genio ... Lo que anda esa scooter... Ya quiero tener una jaja
the engine could go even further, try to improve the calibration of the transmission and to refine the carburetion even more. it seems to go quite well, but when you release the accelerator and the idle jet comes into play it seems to be quite thin ... the main jet I would raise it a few more points, the spark plug in its inner part of the head must be " hazelnut color "when the carburetion is perfect, you have to do some tests at full throttle, stop the scooter immediately and check the internal color of the spark plug ... have fun and congratulations on the scooter!
From Philippines watching your vlog.
У меня на Stels Skif стоит цпг 80кубов, карбюратор dellorto,кастомный пластик,нулевик, распиленный вариатор,3 груза-Только собираю его снял об этом видео,скоро буду тестить! :)
Где это видео?
О скоро Олегу новую дорогу кажется зделают👌🤌👍
Que buena manera de hacer el rodaje 😂
Unas buenas rayas en el cilindro que se ponga loca
Very nice job sir, it runs beautiful and the spark plug looks very good. Please ride safe.
Thank you very much for your good work and useful information well done and I wish you success always
sorry mate always seemed to be better of with a 19.5 del Orto, it had that bit of restiance that all carbs like and always got better performance from them even if you have to mess with jetting! just my experience plus a lot more punchie, no wind up like on a 21. just my advice 18 years tuning 50cc minerales! have fun 😀plus I have the 19.5 set up on my top performance due plus kit, works a treat and is hiting 15hp, just a word of advice larger can mostly be better but on these small engines, its not always the case
Awesome words of advice! I just slapped a Malossi big bore kit and exhaust on my Honda Aero and I've been having a bear of a time getting it to run correctly. I live at about 1600m elevation, so everything runs a little richer up here, but I've tried a 19mm Dellorto and I couldn't seem to lean it out enough with the jet kit that I had. I dropped down to a 17.5mm Dellorto and got it running okay, but I'm wondering if there's something that I'm missing with the 19mm or if it's just too darn big. I've tried pilot jets from 30-50 and main jets from 60-80 without any luck. any words of advice are not expected, but would be very appreciated as I am very new to this!
I absolutely love the Yamaha jog
Отето моща валит будь здоров
Красавчик Истрибитель😊👍👍👍👍👍
Свершилось чудо!!!… Ура, товарищи!
Very nice bro 🔥🔥🔥🔥
Carburatore dell'orto sempre il migliore!!!!!!
Eres un maquina, tus videos son muy buenos!
👍 Applaus 👏... Zündkerze 8 Past 👏
Огонь новые запчасти
Un ancien le gars .
Олег, крутое видео! Жду замеры максималки. Еще бы фазы померить. У меня валяется airsal от пьяджика, все руки не дойдут на дио 34 ее поставить, так там низковаты фазы для ЦПГ с двойным выхлопным.
I love 2 stroke.im from Indonesian
Two Stroke never die 👍👍
Ураааа полетел)))
Man, esses pássaros ao fundo me fazem lembrar o Brasil, saudades
A real carb!
Polskie produkty widzę :) pozdrawiam
Eu acompanho o canal a dois anos, nunca entendi essa macaquice de por carburador de moto serra, sendo que a receita milenar que sempre deu certo, é um kit 70cc retrabalhado, uma taxa de cabeçote e um carburador de rd 24mm ou um 21mm, finalmente ele acertou a receita, agora com o cvt Stage6 que já possui essa jog passa de 100km/h facil,
boa tarde, onde nós aqui do Brazil podemos comprar um cilindro de duas janelas de escape igual esse do video? Sabe informar?
Sei sim, pesquisa por rocket motorcycle, e em Curitiba Paraná eles tem todas essas peças, pergunta pelo kaue
Alter läuft der schön 😍
Super videó köszönöm szépen 🤗
Dobra maszyna🥇🥇
Я снова здесь удивительно
Пуля валит!!!
хорошо проверьте карбюрацию, что очень важно, по цвету свечи зажигания и по тому, как она себя ведет, и немного обеднена карбюратором, на вашем месте я бы просмотрел смесь и уточнил, как я сказал вам, из карбюратора, привет :)
zarąbisty😃
I get so anxious when you ride with so little protection, please be careful. The last thing I wanna hear is you being badly injured or worse.
He's a pro
Samodel is this the best performance till now with those parts, better than chain saw carburator?
Saluti dall'Italia 😌
Дружище сделайте фару, либо на передний пластик либо на руль)
You are awesome Samodel!! Please also be in front of the camera like @Mustie
Hey cool video ! Do you know what size the main jet is what is already inside when you buy the carburator ? You screw it out in the video butt i dont see the size on it.
Please take a picture of the oil tank size of the Suzuki scooter 🙃🙂💯💯💯💯💯🔥🔥🔥🔥🔥🔥🔥🔥♥️
Bravo Samodel buon lavoro si un po' magra ma buon lavoro
Красота))
Thanks samodel
Красавчик
Top 👏
Приветик а не подскажешь какой карбюратор может подойти к baltmotors mint 50. а то отдали скутер малому а он без карбюратора и какой купить не знаем.. помоги плиз подскажи или сылку на карбюр подкинь пожайлуста. лай к подписка и + в карму ))
Thats now to run it in good job.
Donde puedo comprar ese cilindro ??? ... Eres el mejor mecánico ❤ saludos desde República Dominicana !!
Que cigüeñal tiene esa pasola quiero montar un cilindro jevi pero con el cigüeñal normal
Hello nice video, what weight rollers are in ur variator because mine wont speed up with the same bore and carh
Thats a 49cc kit with a 21 carb and exhaust? Looks fast
bomba scuterul
BR8HS is for stock engine, try colder spark plug BR9HS, or even BR10HS
Олежа, рискуешь... поставь датчик температуры и тахометр, от батареек. Богатая смесь спасает только от прогара поршня, но не от перегрева.
Да от чего там перегрев,он ничего серьезно не делал,просто прокатился
hi, i have same cylinder kit, same carb and when i turn on it goes like 5-6k rpm and wants to go, cant go lower with RPM, any solution?
Олег, картинка очень крутая гопро, круто снимает
Loooco quiero tener una scooter , me encantan!!!! 😍🇦🇷🇦🇷Desde argentina un saludo...
Огонь
Its running so lean it will blow up again...
question good sir where do you put the 2T oil tube in that carburetor
Nice job from Indonesia
Hola qué gasolina es más recomendable para una jog rr de 70cc de 95 o de 98 y a qué mezcla 2 o 2,5 %?????
Finaly a good carburator
Salut. Furtunul de alimentare în ce parte îl pun la carburator, lângă șoclu ?
Дорогой друг! Имеется sepia old! Но думаю взять второй скутер,а какой даже незнаю...ZZ inch up, yamahu Aerox, 3KJ или дио 35 ....
Вот щас ракета прям по кайфу
Ты шо гонишь)))Олега тише
Карбюратор был оригинальный dellorto или копия с Алика? 😊
Копия
What needle jet are you using? Dell'orto 21 BS usually ships with W16 which is one of the richest of the W needle series. Try with w9 (stock of dell orto phbg 19) or w7 wich would be my choice. Cheers!!!
W7 needle dose wonder's just using that needle made so much of a difference
Tengo el mismo carburador puesto con un cilindro de 70cc que chicle deberia poner ?
Огооо класно восхищаюсь вами и подскажите пожалуйста тюнинг на джог 3кд на воде спасибо
What is the mileage if this scooty in one liter for installa new carburetor
Where do you live? What cost this China piston Set in your Land?
Thanks you
Hello friend, how did you start jetting compared to the previous carb? I want to move up from a 17,5 to a 21 on my 100cc, but I can't seem to figure jetting out! Thanks!
How did you get on jetting your 100cc in the end bro?
So yestarday someone droped my jog and now when i start it it have high rev and if wheel is not spining when i try to ride it it doesnt do anything but if i give it a little push it runs perfectly. Also there was oil in air filter... but i cleand it perfectly but problem isnt that also carburator looks normal
А почему от карба бензопилы отказались? Зачем было его ставить? Эксперимент или просто более бюджетный? Стоит ли заморачиваться с 35 дио?
Обороты долго сбрасывает, беднит его, поднастрой карб, Олежа)
The number one
En mi idioma eres un crack.
Buenas colega , ma pasao una cosa , yo tengo una igual que es esa , le puse un 21 oko se lo puse y arrancó bien , se kedo sin gasolina y se paró y aora no quiere arrancar y el motor se le llena de gasolina y cuando le doy a la patilla para arrancar echa gasolina por la boca del cilindro ya k le quite el escape gracias y espero respuesta me tiene loco la jog graciad