Sculpfun S9 Laser Modifications
HTML-код
- Опубликовано: 1 дек 2022
- Modifications and "upgrades" to this laser that can be done with low cost including mounting feet and a custom spoil board with layout grid.
3D printed files can be found here:
Sculpfun S9 mounting feet: www.thingiverse.com/thing:517...
Sculpfun S9 Focus cylinder holder: www.thingiverse.com/thing:519...
Layout grid: www.thingiverse.com/thing:491...
Cloudray Laser Safety Glasses: amzn.to/3h0fW6P
SCULPFUN S9 5.5W Laser Engraver
$205 after coupon: NNNROGERS9
www.geekbuying.com/item/Sculp...
The variety of items Geekbuying has is also worth a look.
More deals can be found in their USA Warehouse.
www.geekbuying.com/warehouse/... 
Хобби
Thankyou Roger
Howdy Roger and greetings from the great state of Missouri! I’m adding the Sculpfun S9 to my repertoire, and use a honeycomb bed with my XTool D1 (non-pro) 10w. How badly does a spoilboard like the one in the video you’re making as a gift get scorched up? Do you use yours with elevation off the board for your cutting material? Thanx in advance!
I use a stainless steel plate under the honeycomb board to prevent that.
Really enjoyed this video as I too have a Sculpfun S9 and still learning the ropes! If possible, I might take you up on your offer to have those leg retainers and focus block holder printed. Let me know what the best way to coordinate that is. Really appreciate it!
Send me an email to roger@moonshinedesignsnursery.com along with which State you are in and I will send you a quote.
Thanks for a great video! I've printed the mounting feet & cylinder holder and have a question about the mounting feet you used. In your video it looks as if your mounting feet do not have an additional screw hole inside the right angle - or am I just not seeing it? It does not look as if you had to notch the grid board to accomodate that inner screw. The best image is of the back left mounting foot at 5:37. Thanks!
Two screws per corner is adequate. i did not use the set screw option as it fits plenty tight without it. I did not need to notch anything.
I notice you don't have limit switches. Doesn't the grid become misaligned every time you start it?
Don't you have to reset the home every time and realign the laser to zero/zero
No. On lasers that do not have limit switches or a homing function, I always work from center and "current Position". Since the laser is set in mounting feet, it does not move, so the grid is always square to the laser. I set my laser head to center on the grid, then position my project.
There are other ways to do this, but I find this quickest.
price on legs and can I upgrade S9 5.5 to a more powerful unit without changing the boards
Roger send me the link for the mounting brackets and ling for grid for sculp fun 9. Thank's
moonshinecrafts.com/shop/
does anyone know if i can use any y axis rotary roller on a sculpfun s9
Yes. Just use the Y axis stepper motor cable
@@rogersshop just to make sure , so i could use the ones for atom stack , ortur ect
@@redliner4965 Yes. Just unplug the Y axis stepper motor cable and plug into the roller.
@@rogersshop thank you very much for your time and replies
Is this safe to be in a working laser with your eyes unprotected?
Even though the laser has a shield, if I'm looking at it, I wear goggles.
@@rogersshop sorry but your risking your eyes lazer light can reflect on many things you dont have to look in it... to get blind.... and regarding ventilation ... i would take mesures for it its toxic fumes... but yeah that are not my longs and eyes...
@@technicalmeltdown I do not look at the laser without goggles on. There is nothing to reflect unless doing glass or a mirror, then wear my goggles. Shop is WIDE open to the outside with a fan behind me. I don't even catch a scent. Been doing this a long time and have 16 lasers.