In this video there pretty much stock just headers air cleaners and jets. The only 420 I had was on something heavy with jackshafts that didnt run right. I couldn't really tell you which one would be faster, I would say the two 212s. I. The other videos of the go kart the motors were built. There hemi versions with flat top pistons, ported heads .020 longer billet rods, hot 265 cams, 26 pound springs, billet flywheels with 32 degrees advance plus an extra two with offset keys for a total of 34.
Man I would use torque converters. In this video these are pretty much stock, just a stage one kit pretty much. Now they have alot more goodies and its alot faster than it was in the video, it's almost to much. The torque converters are a night and day difference, especially when you stall them up higher. I didnt forget about you, I've just had it all tore apart and need to put it back together. Ive been trying to finish another project and haven't got to it yet. I have some pictures of it together, that would help you. Like my born in a barn customs page on Facebook and I can send them to you on there.
I just got a dual engine go cart , the chain pops off on one of the engines which rhat chain is pretty tight but I believe that the engines won’t sync together and that’s why it’s happening did you have problems with that
I just built a really sweet vintage style go kart in my little home shop, Have you guys considered a remote front gas tank with a simple crankcase pulse operated fuel pump? It brings that tall ass engine down and it looks much Meaner, You see engine, not plastic gas can, and holds less but so what, I'm going to try my hand at a custom copper tank under the steering.
I seen one with twins the other day but the guy had them facing eachother like the old vintage 2 strokes in vintage race karts he got one to run backward now that’s what I’m trying to figure out I kno he’s cut his cam shaft up and marked it an d sent it to the welder but no clue what Elle’s was changed any info would be great
They used to make a backwards running 5 hp Briggs there was one cart I seen that came with two like that. We looked it up it was a long time ago don’t remember name of company.
@@borninabarncustoms6767 interesting, im surprised you are able to turn so well. Ive been thinking about building a twin engine and thought that may have been a problem.
Alot it's been years since they have though. I just take them out every once in a while. I really get paranoid on my mini jeep. I dont know what they would do about it.
I had about 550 or 600 in it in this video. The video I just posted about a week ago of it I probably have 1300 in it. Check out the later video of it its alot faster in it.
I thought about what that would be like, after I built this one. I would like to see it!!! I have a Facebook page called born in a barn customs also. Send me some pics of it or post them if you dont mind.
That thing is wicked! I'm working on one now! Nice build!
Thanks buddy I need to make a new video of it. I've put alot of performance parts on it since then.
Good. I just got a few things from NR too.
@@borninabarncustoms6767 top speed??
I've never topped it out I need better wheels. It starts shaking about 60 I've went about 65, it still had alot left
I feel like I'm watching an episode of trailer park boys. Awesome
Video.
Lol not really what I was going for, but I'll take it. It was my first video I made.
The way it's filmed. I love it. All the videos I've seen are good.
Appreciate it buddy theres alot to editing them. I feel like I couldndo better, I learn more every time I do them
Dude, I love your neighbors.
Mine would have called the cops before I got out the driveway!
My neighbors?
I didn't see your whole comment for some reason. They aren't bad as long as I'm not doing it all the time.
Same here.
Killer kart!!!
That is badass brother
We’re cool but we’ll never be this cool
For the speed that's going people spend like 300 on stage 3 kits but doing this is so much cheaper
It will go alot faster I'm not going for top speed. It will probably do 75 or 80 right now. The wheels aren't balanced enough it starts shaking.
This is amazing
Awesome 💯
Pretty sick dude!
Thanks buddy!!!
When you start out the video with a donut. Classic
Теперь я видел всё, автору 👍
The neighbors must love you dude.
Ya they're not the biggest fan of me. I try to be as respectful as I can when being an assehole.
The neighborhood loves him 🤣
I try not to stay in one spot, it's not as bad if I just cruise by once.
@@borninabarncustoms6767 I had a muffler on my bike but it shook off. Now I have a straight pipe.
I had one on the four wheeler I made it didnt seem to make much of a difference though it was still pretty loud.
Awesome Kart
Thanks buddy
The way he starts talking is hilarious.
That's f****** dope my friend now is that a live axle or do you have each wheel split independently
Go cart people are my kind of people...
Great job
Appreciate it buddy!!!
Amazing!
Appreciate it I'm gonna get some more footage of it, its alot faster than it was in this video.
@@borninabarncustoms6767 Great I'll stay tooned!
@@borninabarncustoms6767 Do you build custom carts for customers also or just for your personal?
I've never been asked to build one. I definitely would if someone wanted one
@@borninabarncustoms6767I want to do this trying to figure out the axel length and how to connect everything
Will predator parts fit most honda knock offs
Shits lit mane
Check out my video called one fast little jeep. Its alot cooler than the go kart.
Holy crap that's fast are those stock? Or did you put a stage kit on em? You think it's equilavent to a single 420,,?
In this video there pretty much stock just headers air cleaners and jets. The only 420 I had was on something heavy with jackshafts that didnt run right. I couldn't really tell you which one would be faster, I would say the two 212s. I. The other videos of the go kart the motors were built. There hemi versions with flat top pistons, ported heads .020 longer billet rods, hot 265 cams, 26 pound springs, billet flywheels with 32 degrees advance plus an extra two with offset keys for a total of 34.
Kind of sounds like a straight piped Triumph Bonne
What upgrades have you done to that? It's amazing
It was pretty much stock there just air cleaner jet and header. They have alot more power now, I need to make another video
@@borninabarncustoms6767 I would love another video, this thing is already sick.
I have a Facebook page called born in a barn customs also. Check it out I have a video of me on it playing around when its wet.
@@borninabarncustoms6767 I definitely will.
I'm trying this same setup but I'm not sure how far the torque convertor sticks out for engine spacing? Its gonna be a tight fit
Right now I ordered two clutches but I'm probably gonna switch to torque convertors
Man I would use torque converters. In this video these are pretty much stock, just a stage one kit pretty much. Now they have alot more goodies and its alot faster than it was in the video, it's almost to much. The torque converters are a night and day difference, especially when you stall them up higher. I didnt forget about you, I've just had it all tore apart and need to put it back together. Ive been trying to finish another project and haven't got to it yet. I have some pictures of it together, that would help you. Like my born in a barn customs page on Facebook and I can send them to you on there.
Nice
Thanks buddy is hould have a way better video coming in a couple weeks.
I just got a dual engine go cart , the chain pops off on one of the engines which rhat chain is pretty tight but I believe that the engines won’t sync together and that’s why it’s happening did you have problems with that
I never had problems with that, it shouldn't matter if they sync. I had nice motor mount plates and bolts, also cvts are alot better on chains.
I just built a really sweet vintage style go kart in my little home shop,
Have you guys considered a remote front gas tank with a simple crankcase pulse operated fuel pump?
It brings that tall ass engine down and it looks much Meaner, You see engine, not plastic gas can, and holds less but so what, I'm going to try my hand at a custom copper tank under the steering.
Ya I don't like how they look with the tanks on the engines either. I was gonna switch it one day.
They do this on all race karts there’s nothing new about it
@@Budget-weld-review Who said anything about "new"?
What kind of rear axle are you using? Just a straight axle?
Ya it's just a normal live axle
You have a live axle. Would it make a difference to make each wheel independent. Like one engine per wheel
It would make it hard to sync the engines.
@@borninabarncustoms6767 I don't think it it necessary to sync the engines, as long as they linked together on the gas and break.
I seen one with twins the other day but the guy had them facing eachother like the old vintage 2 strokes in vintage race karts he got one to run backward now that’s what I’m trying to figure out I kno he’s cut his cam shaft up and marked it an d sent it to the welder but no clue what Elle’s was changed any info would be great
They used to make a backwards running 5 hp Briggs there was one cart I seen that came with two like that. We looked it up it was a long time ago don’t remember name of company.
are you running 1 drive axle per rear wheel or a single live axle driven by both engines?
A single live axle driven by both engines.
@@borninabarncustoms6767 interesting, im surprised you are able to turn so well. Ive been thinking about building a twin engine and thought that may have been a problem.
You cant have giant back tires, if they are to big compared to the front it wont turn.
@@borninabarncustoms6767 interesting
What size and brand are those front tires I've been looking for those
From the research I've done I think that go-kart was a 63 Fox flyweight them are the original front wheels to the go kart.
@BORN IN A BARN CUSTOMS OK I've found some similar they just don't make stuff like they used too
cool, u gotta got texan blod
Huh
How many times have the cops been to your house?
Alot it's been years since they have though. I just take them out every once in a while. I really get paranoid on my mini jeep. I dont know what they would do about it.
You can get one predator to go 60mph! and with two you can go much much faster
Yeah I know that it had no problem doing 60 I really don't want to go much faster with the wheels and tires I have I just wanted to take off hard
Hi im making a predator 301cc go kart and want to know some tips and tricks before hand
Is it gonna have two engines or one?
About how much did it cost to build?
I had about 550 or 600 in it in this video. The video I just posted about a week ago of it I probably have 1300 in it. Check out the later video of it its alot faster in it.
How fast is it?
I've been about 65 and it was still pulling pretty good. The wheels are to un balanced it starts shaking, I need to put nicer wheels on it.
so does 2x engines mean 2x horsepower?
Yes it does, it feels like 3 times the power.
I want to know the top speed
im working on one with twin 420cc predators
I thought about what that would be like, after I built this one. I would like to see it!!! I have a Facebook page called born in a barn customs also. Send me some pics of it or post them if you dont mind.
post up some videos man that sounds cool
You talking to me or cbjonsey?
Got a vid of how throttles are setup?
I have a video I need to put out of this thing anyways I can throw it at the end of it. I'll put it out sometime this weekend
@@borninabarncustoms6767 thanks! I'm up to something similar
What kind of pipes???
Man I'm not really sure, it's been a while since I've put it together.
clean as fuck!!!!!!!!!!!!!!
Thanks buddy
Why don't you convert it in a lawnmower since it sounds like one.
you can, but lawnmower engines tend to have vertical shafts that make a more complex drivetrain.
Let me buy this off you
I would sell it but I've got alot in it. I've done alot since this video it's way faster now. Been meaning to make another riding video.