**SUPERIOR SETTINGS FOR IRON INFESTED SITES** Field Tested & Approved NOKTA LEGEND | METAL DETECTING
HTML-код
- Опубликовано: 27 апр 2023
- "YOU'VE ASKED ME FOR THESE SETTINGS FOR SO LONG, & FINALLY THEY ARE HERE IN 2024!"
BRAND NEW 2023 & 2024 (15 MINUTE INFORMATION JAM PACKED VIDEO) FIELD TESTED & APPROVED METAL DETECTING SETTINGS FOR IRON INFESTED SITES! If you use a Nokta Legend, then these AMAZINGLY PRODUCTIVE settings are for you!
After countless hours of FIELD TESTING, I highly encourage all Nokta Legend users to use these settings in order to pull all of those high conductive coins and relics right out of dense iron debris sites!
As mentioned in this video, here are 2 links to the other further refined coin hunting program for old parks, fields, and public places!
**PLEASE NOTE THAT THE THRESHOLD LEVEL IN THE VIDEO IS MENTIONED TO BE SET AT 12. THIS WAS PRIOR TO THE BLUETOOTH HEADPHONE UPDATE FOR FIXES** SET YOUR LEVEL SO THE AUDIO THRESHOLD IS BARELY AUDIBLE IN YOUR HEADPHONES AND/OR DETECTOR IF YOU ARE NOT USING THE HEADPHONES.
• UNMATCHED Nokta LEGEND...
• SUCCESSFUL SILVER COIN...
Leave a comment, like & subscribe - welcome to our great community of channel supporters!
GL & HH - Jason Corbett 
Развлечения
Thanks Jason for this video on those settings. Great explanation. Makes things much easier to understand.
Great video Jason - I have had the Legend since it was released, and by far this is the best explanation on the settings I have come across. Definitely going to save it to a profile. Thanks again
Thanks so much for preparing this video Jason. I'm sure it will help. Good Hunting.
Thanks for the video, I will set up a profile using your settings and give it a try, never tried pitch tones, I mostly hunt modern parks for clad and jewelry but sometimes get to older sites, have had several detectors, love the Legend.
Listen for iron. A good percentage of modern parks are the last vestiges of an old home site that was demolished and turned into a park. I've made some of my best old finds at modern parks that nobody suspected had any old keepers. Due to being groomed parks however, these targets are often really deep so you have to slow down in those iron zones. :)
Great video , I just got a new Legend and I will give a try. Thank You for your time.
Really good info, I had no idea about the range of customisation, thank you 🙏
Thanks, I'll give these settings a try!
I found this very helpful for setting my tones and thresholds.
Just got my Legend and the way you explained a very intricate set-up was fantastic. I understood everything perfectly. Great Job!
Glad it helped!
20 khz Park or field 1-2 for deep coins on recovery and 6 in trash for coins and jewelry pattern F ground and iron filter and stability 0 audio gain 4 noise cancel 0-1 Ferrous check 3 to start depending on conditions bottle cap 0, manual ground balance of course the rest factory preset I sent a text to dilek about making these settings in a pre set detector like the simplex Lite good luck TNX
Thanks for sharing this video with a great explanation on settings. I've had my legend for about a week and loaded this program from the jump. This program is definitely a coin pounder. Every target I've dug with it has been non ferrous in a super iron infested site. Thanks again!
Thanks for the video. Question.. the last step of the settings following the threshold, your detector shows a VDI scale of 0 to ~54 with a setting of 30 . My Legend operating v1.11 shows a scale of 10-60. What am I missing?
I opened the discrimination scale up to accept 0-10 and not hear 55-60 - I did this because I want to hear the iron BUT, I do not want the iron wrapping around to the 55-60 and producing a high tone when I am listening for high tones of good conductive targets.
@@Diggin4LifeMetalDetecting That makes sense.. Thanks
Thank you for the settings I put it on my legend and I love it thanks again my friend
No problem 👍
Good video. Big helper for a novice like me. Thank you
Thanks for taking the time to Document and upload.. The Random Speaker volume rant gave me a bit of a chuckle, But your right.. A lot of people do go straight to 10(11 if they could😉) and yes, that habit can ruin your speakers , burn out your preamps, your ears and it usually bums out people in your vicinity🤙🏻…
Much appreciated - thank you for watching and commenting. Cheers - JC
Great video.
Super explanatory
Went to a spot I took my simplex, I couldn’t hit anything with it. Nothing but iron grunts. Went back with the legend and this setting. Got a few coins.
Awesome!!! Keep at it and congrats!
Hi from GreekSite of Cyprus.Many gretings.My friend i am in detectin hoby about 20 years Realy many many thanks I have the ledend from the first buyers.Your correct my friend and relly much helpfull.Many thanks
Thanks for the great video.
I got a Legend Pro pack about a week ago. Have not assembled it yet. I will today after the LG24 coil that I ordered gets delivered sometime today.
Tell you the truth the settings are very intimidating right now.
I hope I can find something on the Quick setup guide that will let me start swinging. I'm used to the MXT PRO and Tesoro Silver Umax. Much easier for this 75 year old to understand!
We'll see what happens and I'm sure it will eventually work out I hope.
I have my IDX PRO and Kruzer Gold to fall back on lol.
I will definitely watch all of your Legend videos and try these settings. I will probably take it out to some old gold mining areas about 30 miles from here.
Looking for gold of course and possibly dropped coins.
ENJOY THIS VIDEO & GET OUT THERE & CLEAN UP ALL OF THOSE ALREADY HEAVILY HUNTED OUT AND IRON INFESTED SITES! Please leave a comment and let me know how successful you have been using the hottest metal detector on the market! On one last point, as you will see in this video, 55-60 has been discriminated OUT - this eliminated the wrap-around effect from bits of iron debris and nails as well - this is just as important as the settings explained in this video! Any other questions - just ask!
Awesome video Jason.thanks for taking the time and explaining your settings.We are going out tomorrow and have your program installed...with a couple small tweaks.cheers buddy!!!
Your bc is set to 0 ?
Zero! No need to use it
Yes with the 1.11 update.
I run a 4khz program very similar to this. Its one of the only programs that picks up silver coins next to or under iron. But i will set this in anothe profile and let it rip! Thanks!
Tried your settings yesterday found my first gold coin thankyou from the uk
That's an incredible discovery Ian! Congratulations my friend!!!!
@@Diggin4LifeMetalDetecting thank you
Thanks.
Good job,thank you.😇👍
Appreciated my friend. All the best in 2024!
Top man I’m out with these saved on my machine
What a gr8 video. Hope this setup helps me learn the machine, I'm a noob to the Legend (ATPro user).
Much appreciated and wishing you the best of luck!
Awesome video, I usually run 60 tones but you’ve totally inspired me to try out the pitch tones 👍👍😆👊🦊
I find pitch tones using these settings for some reason sounds like the high conductive targets are being "drawn out of the iron" because the pitch tones have that longer resonating pitch (a progressive pitch) unlike the 60. Appreciate the comment!
@@Diggin4LifeMetalDetecting I’m I really like how the legend handles iron to begin with especially with m2
what are your thoughts on m3 to deal with modern trash?
I find that M2 M3 20khz & 40khz become more susceptible to providing false good signals on trash and iron, because those modes are focused primarily on the lower conductors. I find M1 to be the most stable mode to use for coin and higher conductive relic hunting.
Tyler - I have reached out to a direct source to further clarify your thought. I am to believe based on earlier information pre-Legend, that the M1 retains the lowest operating frequency - thus more tailored for the detection of high conductive targets. As the M modes increase (2 and 3) you start to lose the lower operating frequencies, thus they begin to be more suited for the beach and the detection of lower conductive targets like gold. I will get back to you.
Just wanted to give an update, I put the program in my machine, I live on my great grandparents old place, my Granny, my Dad and his siblings were raised here, I lived here from 11-23 years old. I've pounded around here several times, but I have pulled an Oklahoma state tax token and probably 10 coins in an hour and a half. I'm very happy with the program, except I think I'm going to try to notch in my nickel numbers, because I don't want to leave them behind.... But I definitely appreciate this video, I can't wait to try some old home sites that I can't seem to pull any coins
Another success story! Great to know it is bringing your family history to the surface and back to life. Keep us updated, and feel free to share the program and your success story. AWESOME JOB! Congrats sir.
Fantastic, really well explained from someone who knows their stuff. I have yet to buy my Legend but it's inevitable that I will. The problem I'm having is when to buy. There are improvements available on the upcoming release that are not available on the current model. IE carbon fiber upper shaft and cuff design, the LG 35 coil. Do I buy the standard Legend as is, or do I wait and buy the new and improved? I've saved this video to my watch later list. Awesome job man, huge fan!
Appreciate the kind words! From what I am aware, the guts in the revamped Legend are the exact same as the present model, but with only the carbon upper and the LG30 coil instead of the LG28.
I also believe one can get the existing version at a GREAT price. I have not seen any noticeable difference between the LG28 and the LG30. Strictly from a financial prospective to what you are getting, the present version with the LG28 would be anyone's best deal!
So buy now and possibly upgrade later, gotcha. Thank you!
Great video! What settings would you recommend for gold rings?
You have some very interesting settings that get you in the proper area and I have some settings that I have got Good results from iron filter and stability are an area that have a impact on sound of the target especially at depth on a video I saw the guy doing it went through the settings for iron and the distances from the target as the legend iron settings went up the tone had a change and at 5 it was hard to find it so by going to 1for iron filter and 1-2 for stability the shape of the sound was more distinct especially for Deep coins it has worked out so far especially when I varied the sweep speed there is a lot to gain on the legend by doing this I have been trying 20 khz but will try the M 1-3 when the signals change a little bit recovery speed is another thing I think is good to try I started at 3-4 as trash showed up I went up to 6 which took out the scatter sounds but should be adjusted to suit the area I am looking to get more equipment can you suggest a store
I like Colonial Metal Detectors in the US...never an issue. In Canada...I do not have a preference. Appreciate the info Jeff.
Good video, interesting information. I don't have a legend, but I've got a buddy that just got one and I'm trying to see what I can learn about it to help him with his. From the videos I've watched, it looks like you're going to be missing nickels and Indian Head pennies if you don't drop that down from 34 to about 20. But then, I know guys that don't dig zinc pennies when they've got a signal that they think is a zinc penny
To miss the odd nickel or penny would also be well worth the significant amount of time that would be lost digging trash that falls in that window of discrimination. Appreciate you watching and throwing in a comment. Good luck to both of you - J
Kind of like cherry pickin’ without discrimination. Just low volume and low tone at the mid to lower end. I haven’t tried that with mine yet. I did the 1.11 upgrade a while back, but I still need to set the beach mode to my liking, since I do half to more of my hunts in the beach waters.
Good content my friend. You have been Stubbed . "White Water Jack" N.J. Beaches
Wow.
Thanks for the great video. Definitely going to try your settings but could you explain to me why you chose these settings. I’m relatively new to detecting and am struggling to understand what changing settings actually does and don’t want to change my settings without understanding why. I would really appreciate it if you explain to me the theory behind changing iron filter,recovery speed,audio gain and tone settings. Thanks for the video. 👍
Would love to explain. Send me a PM with your email address and I will send you the info you have requested.
Appreciate the watch and the comment. Cheers
@@Diggin4LifeMetalDetecting Hi. I’m not on social media so can’t PM you but I have emailed you so hopefully you can explain things by email. Thanks Rob
Read your manual. It will explain what all of these settings are although the video pretty much explains them lol.
I am would this vídeo man
👍👍👍
Thanks for the info i will try it
On your iron, did you have bc at 0 or default ? I don’t remember hearing anything about it ?
I have already saved your suggested settings in Park #2 profile on my new Legend pro package . Just got it Friday and haven’t taken it out for it’s first hunt. Thanks for the insight , great video. Looking forward to seeing more.
Be blessed and stay safe.
Bottle Cap reject is at 0 when the 1.11 version is uploaded James. Cheers
👍
First of all thank you for the great video and especially the rational behind most of the settings. I'm just wondering what is the added value of bringing up the threshold from 0 to 12. Why keep the background buzz?
Please note that I'm asking as a total n00b who just got the Legend based on your videos :D
im also interested as of why keep the buzz on (going to test these settings in few hours!)
Because it helps you cherry pick the deep signals which makes a blip cutting the threshold buzzed out letting you know that it is in fact hitting a Target. I used to do the same thing until it just got annoying now I only use it when I'm trying to find but it is definitely something that works whenever you get used to no doubt. At least this is what I get out of it from my experience but I would like to hear what his reasons are too
Hi Guys - this setting was before the BT Headphone update was implemented. You would set it so it is just barely audible through the headphones. I believe now I am using 3. Thanks very much for asking.
With faint gain it will cut out over deep targets that won't read vdi. Gets a bit more depth
Hi Jason. I've been using this program and it works great. Just wondering what changes you might make to it for detecting totlots, and schools etc for jewelry and Canadian clad. Thanks in advance.
Canadian clad is where you will run into a TON of trash...clad 99% of the time will hit low...with trash...which means you will beed to detect almost all targets.
@@Diggin4LifeMetalDetecting Yup. Fresh clad usually isn't too bad but our Canadian stuff degrades fast so I find it doesn't take long to sound bad. I've been having my best luck on clad using M1 and listening for the tones that jump from low to high. ITs like the steel clad is confusing the machine and it doesn't know whether to call it a high or low conductor. Those are the ones I dig......but a lot of coins also ring in just like plain old nails( I;ve tested it) but those I usually ignore. They're almost always too far gone to cash in anyway. The older nickel and copper coins usually pop up just fine though. What you can do it go to a tot lot and hunt in the grass around the swings or the slides or whatever. THere's a lot of coins in there so that's a good place to run wide open and just dig it all for a while until you see some sort of pattern.
Do you have any live dig videos using these settings? Are you digging every good signal even if it's not repeatable?
Yes absolutely I do Spencer. Every good signal that breaks through the iron barrier I will dig 120%!
Boa noite. Está configuração serve para praia ... obrigado.
thx for the info !! east Canada here im in N.B just curious if threshold is mandatory in these settings,, would it work the same with no threshold ? just ordered the legend tonight,, and have used the nox 800,,, still concider myself a beginner ,,, thx again
I would always search with a very faint threshold hum in the background.
Thanks Jason for the settings. Will those same settings work on version 1.09 firmware or would it need any changes to it?
These are for the 1.09 Jeff, BUT tested with the 1.11 update for operational consistency, and they are perfect - exact same results even with the new options on the 1.11 not used!
ใช้ version 1.0.9 เหมือนกันอยู่ประเทศไทย
I would like to try this program out, can you write it out as a word document?
Could you show how to save that to a custom profile and how to switch from stock to any saved custom profile, please? I am very new to the legion. Thank you!
Hi Jim - let me see what I can come up with. Congrats btw on your purchase!
@@Diggin4LifeMetalDetecting Thank you.
Flying Eagle 31 vdi, shield nickel 26, I hear ya anout coins but I’d say you would be happy if you dig repeatable signals over 20vdi . Thanks for the info man
I hear you. The percentages are just not beneficial to dig 20 and up. In an empty farm field, sure. There would be trash, but you would ultimately be wasting less time digging it. Appreciate the comment - cheers!
Need a explanation on saving programs. Is there 4 total or 4 for each set program. Ie field 4, beach 4, etc. Or just 4 for all programs to share ?
Let me work in this for you Dana!
Yes, each mode has the capability to save 4 profiles. Park 4, field 4, beach 4 and prospecting 4, for a total of 16 saved profiles. Each profile can be set to your own preference as show by Jason, in this video, in which he does a great job explaining the settings process.
If you think there is gold you may miss a lot of it that will be in the 12-55 range but if your just looking for silver and copper looks good.
Yes, the purpose of these programs is to dig more higher conductors than to dig a lot of trash. A lot of places won't have gold, so you could literally spend your entire day digging trash in the hopes that you might find one gold ring. In addition, while you're spending most of your day digging trash in the hopes to find one gold ring, you could have walked away with a pouch full of silver and old coins.
Where would you set for jewelry gold silver coins in salt water areas
Hey Tony - Salt water and gold...open up 10-54! Good Luck
@@Diggin4LifeMetalDetectingthank you and good luck to you too
Still shouldn't blow a speaker on MD.
Luckily you don't need full vol on this detector.
I've never had a blown speaker on any detector at full vol esp when detecting near roads.
I have a question how do i set my tone break like you have yours
It is under the tone adjustment options. Refer to the manual and my video for reference. Its pretty straight forward
@@Diggin4LifeMetalDetecting ok thank you I got it figured out thanks again
How about a ring setting of numbers
Could do.
Can you show what numbers you have had on your screen for rings and jewelry
Great video, whats with indoor gloves though???
Trade mark buddy. Prob better looking than my ugly mug lol....naha....trade mark.
Best settings for smaller gold nuggets in mineralized soil?
Hello @nwbauer91 - M3 all day long in Multi, or single at 40khz will most likely increase ID's at the 40khz. Run 1 tone, and dig anything from 1 - 30. 1 tone will level all tones out and slightly enhance the detection of smaller nuggets. As for the other adjustment, what I use for iron infested sites IMO will work just fine. Best of luck.
Will these settings work great for gold jewelry as well?
No. You would need to open up your disc a bit more to detect all gold. You will dig more trash though unfortunately.
@@Diggin4LifeMetalDetecting ah,ok. Still learning this highly addictive hobby. Thanks for replying much appreciated.
Hello. Are there settings for a legend on the beach by water?
Disc out 0-10 and 55-60 to eliminate wrap around rusty iron.
Gold can show up anywhere, so you may be better with 1 tone on the beach or in the water.
60 tones or pitch tones are great on land in dense trash or dense iron infestation. I focus my settings more on working iron infested sites and very challenging scenarios.
@@Diggin4LifeMetalDetecting Thanks
What software version are you running?
1.09 / 1.11 / 1.13 - any one of these 3 versions. The NEW options on the 1.11 provide very little benefit over these core settings.
buying one used most of the time have the same new cover just like these nokta machines own an old simplex much cheaper then a minelab unless its used
10 months later, would you still recommend these settings?
Absolutely, or I would take the video down! The priority of my channel is to communicate accurate and solid information in regards to settings before any video is posted with Settings. There is extensive work done to make sure that what is posted is going to be the best option for its intended purpose.
Thank you for sharing this with us!
Boa noite.essa configuração serve para praia .obrigado. !!!
الصورة كايفه
Why use treshhold?
Threshold assists the detectorist when it comes to target tone.
Discrimination pattern F
Gold coins and jewelry? - Nope!
Correct. Head to the local old park and dig everything from 10-30, and then come back and tell me...aaaa now I get it, I have no gold ring and I spent the entire day digging trash. It really comes down to how you want to spend your day and time. We all dream of finding gold coins and gold rings, but realistically, they are far and in between. Now, at a beach, I would dig almost everything because the site, and odds are largely increased on finding more gold and jewelry than trash. To be a successful metal detectorist, you also have to make the smartest decisions to find the most, while wasting the least amount of time digging crap. GL & HH
@@Diggin4LifeMetalDetecting
But gold also beeps between 10 and 30, so you just as easily could be passing up gold as well.
That is correct. See my comment above in this thread about the reasoning. Best of luck in 2024 my friend.
Sorry I don’t understand how you get the tone brake numbers so frustrating
Have you read the manual and followed step by step. This would be easier than for me to explain.
Let me know if you still have issues.
@@Diggin4LifeMetalDetecting Hi thanks for the reply. Iv have read the manual and to me it’s as clear as mud lol I’ll have another look at it thanks I’ll keep watching your videos se if I can pick some more ideas cheers Graeme
te podés perder un anillo de oro que suena en 25 ...
So you don't dig any gold interesting
I have with these settings, but not usually. I prefer to spend a day digging good targets than a day digging a TON of trash "in the hopes" that a gold ring etc "may" be there.