Of course, I'm the ONLY person who questions this, and you are the only one to show it! Do these just wear? Every discussion I've ever had ends with, 'that's just the way these old Corollas are. Great video!
I've got a 2003 Toyota Avalon with the 1MZ-FE V6 engine. It has 250K miles on it. I was told the valves don't have to be adjusted on these engines. Is that accurate?
Peter! I'm trying to diagnose my 2002 corolla sounding like a diesel..when it is not. 1) I'm thinking it's either the lifters or valve clearance: Do I need to remove head or just valve cover to replace lifters? 2) Can I do it with engine in the car? 3) Anything else I should replace/do while I'm in there? Keep up the videos!
So we have the A2 with 150 Hv Petrol. When i accelarate from stand motor makes a litte slitghtly rattering when running up. i changed oil 5w-30 in now for a week ago. Car has ~140.000km. Is this normal?
There's a chart that correlates the number inside the lifter with the thickness, if they're used u must mic it to see what thickness it is cuz they will be worn
This was going to be my question. Is it the lifter that gets worn, or the block, or the valve, or all 3? The lifter looked worn, but that doesn't mean it was necessarily the main issue.
Thank you for the info very educated, I have a question mr Peter, we are doing valve clearance for 08 toyota camry 4 cyl the car has 148000 miles, do you think is better to replace all valves caps or just the ones that are bad let me know many thanks.
Hello Peter you have great videos. I have a check engine light and I've found #1 has 155 pounds #2+3 have 125 and #4 has 75 pounds, is it possible that it is just valve adjustments? or what?
Thank for responding, sorry but I,m not sure what you mean. My friend's car seems like it has NOT been well maintained, P0300 can be a clog fuel filter to a vacuum leak to ....... in 145,000 miles I'm finding 8 out of the 16 valves are in need to be adjusted, they are under specs.
@@fourwheelinnm4721 remove the 8, look inside for the number, example(5.18) meaning if the valve bucket is 5.18mm in thickness, replace with the 5.22mm.
Can you grind the valve stem if it is tight. & also cylinder head bolt torque specs for toyota celica 1.8, 2001 gt the book says 34 ft. Lbs. then 90° is this ok
Peter, on my 05 rav4 4cyl engine, on the intake side i have a clearance of .50mm between the valve and the camshaft, what could be causing this? thanks.
@@PeterFinnTheCarDoctor this is where you come in. I need your help to get the right measurement of all exhaust and intake shims so that I can order from Toyota and just replace
Just in case anyone else is looking through the comments - you don't. If they are completely worn you can replace them, but you do not adjust them - the oil does the adjustment by creating enough resistance to open the valve at the correct force.
Does anyone have the order, or at least the specs for the 1GRFE 4.0 V6, more specifically a 2004 4runner? I lost my footing and a few of the valve tappets fell out and I don’t know where they go, lol. Any help is appreciated!!
is 1zzfe i get the lifter new from toyota dealer every lifter have the same size i wanna if that need cut it because in the said 0.15 to o.25 in intake and exhaust is different..thank you for ur videos
Thanks man, my engine nuns way smoother now, and I also noticed efficiency improvement from 28mpg to 32 mpg, and also engine stopped shaking.
Ok
him just saying “ok” to your thanks lol
@@hunterparker69 Rude as fuck lololol.
Of course, I'm the ONLY person who questions this, and you are the only one to show it! Do these just wear? Every discussion I've ever had ends with, 'that's just the way these old Corollas are. Great video!
Yes and yes
Very impressive Peter! Your videos are informative, thorough, and helpful. Thank you for sharing.
Thank You! :-)
You did not show how to take off the timing chain. Is it simply a matter of finding the detachable link and splitting the chain, or is more involved?
Hi, I will do new video to You.
Peter Finn I have the same question
So when I understand correctly, you have to take off the chain as well, in order to adjust the valve clearance?
Noted 👍
Love your videos man! You take your time and make them so detailed. Every single bit of info you need to know is given. Thank you very much.
Thanks for info. :-)
Thank you Peter Finn!
😀👍
I've got a 2003 Toyota Avalon with the 1MZ-FE V6 engine. It has 250K miles on it. I was told the valves don't have to be adjusted on these engines. Is that accurate?
Accurate, just like the "lifetime" oil in manual gearboxes.
built in obsolescence..
Thanks 👍😀
Peter! I'm trying to diagnose my 2002 corolla sounding like a diesel..when it is not.
1) I'm thinking it's either the lifters or valve clearance: Do I need to remove head or just valve cover to replace lifters?
2) Can I do it with engine in the car?
3) Anything else I should replace/do while I'm in there?
Keep up the videos!
My master thank you very much iam Ugandan Kampala garage
Welcome
So we have the A2 with 150 Hv Petrol. When i accelarate from stand motor makes a litte slitghtly rattering when running up. i changed oil 5w-30 in now for a week ago. Car has ~140.000km. Is this normal?
There's a chart that correlates the number inside the lifter with the thickness, if they're used u must mic it to see what thickness it is cuz they will be worn
Ok
This was going to be my question. Is it the lifter that gets worn, or the block, or the valve, or all 3? The lifter looked worn, but that doesn't mean it was necessarily the main issue.
Thank you!
Cheers from Canada!
Welcome! Thanks 👍😀
nice
I knew there was a cap between the cams and the valve but I didn't know that you could adjust them for HP
Yes, the Toyota is professional car.
Thank you Peter 🎉
👍
VVT-i's have always been tappety but hugely reliable engines.
Noted 👍
Years 2000 to 2020 Ohhhhh Nice....
Yeah ! :-)
Do you need to remove the engine to do this job? After how many km you need to adjust them? How much it cost to do this job?
Do this every 50 000 miles
Thanks, does this also apply for the 1NZ-FXE in a Prius?
Yes
Is this applicable on toyota vios 2011 model vvti 1.3cc
Thanks and noted 😀👍
Cool videos hey do you have one when u remove the block I can't find the top left block screws I need to replace head gasket .. thank
Hi and Thanks for Feedback. :-)
very thanks,very good video.
Thanks and Good info ! :-)
Thank you for the info very educated, I have a question mr Peter, we are doing valve clearance for 08 toyota camry 4 cyl the car has 148000 miles, do you think is better to replace all valves caps or just the ones that are bad let me know many thanks.
Replace just to ones out of clearance
Thanks for comment 😀👍
Hello Peter you have great videos. I have a check engine light and I've found #1 has 155 pounds #2+3 have 125 and #4 has 75 pounds, is it possible that it is just valve adjustments? or what?
Hi, maybe stuck in piston rings
Thank for responding, sorry but I,m not sure what you mean. My friend's car seems like it has NOT been well maintained, P0300 can be a clog fuel filter to a vacuum leak to ....... in 145,000 miles I'm finding 8 out of the 16 valves are in need to be adjusted, they are under specs.
@@fourwheelinnm4721 Peter means the piston rings might be stuck, and that is possibly the cause of the compression difference in the cylinders.
@@fourwheelinnm4721 remove the 8, look inside for the number, example(5.18) meaning if the valve bucket is 5.18mm in thickness, replace with the 5.22mm.
Sir, I think my fortuner need to change the cap to much sound or knocking. what is the exact torque?
15 Nm
Can you grind the valve stem if it is tight.
& also cylinder head bolt torque specs for toyota celica 1.8, 2001 gt the book says 34 ft. Lbs. then 90° is this ok
Yes
Peter, on my 05 rav4 4cyl engine, on the intake side i have a clearance of .50mm between the valve and the camshaft, what could be causing this? thanks.
Hi, you need to replace adjusting cup
Okay Peter, where can I get the valve amounts for a 7afe 1998 1.8i GLE Toyota corolla
Hi, The Toyota Haynes repair manual. from ebay.com
@@PeterFinnTheCarDoctor this is where you come in. I need your help to get the right measurement of all exhaust and intake shims so that I can order from Toyota and just replace
Special 👍to video Wonderful
Ok and Thanks
peter i have a question if i put new lifter new camshaft i have than adjust
One 1.0 ?
Hi man what is the good size for intake and exhaust ?
Hi, intake is bigger and exhaust is smaller. It is like testing.
Nice...
Thank you! Cheers!
Why this gets me recomennded? But interesting video
Good
How do you adjust the hydraulic ones?
Just in case anyone else is looking through the comments - you don't. If they are completely worn you can replace them, but you do not adjust them - the oil does the adjustment by creating enough resistance to open the valve at the correct force.
Very educative
Thanks for Your comment. :-)
Does anyone have the order, or at least the specs for the 1GRFE 4.0 V6, more specifically a 2004 4runner? I lost my footing and a few of the valve tappets fell out and I don’t know where they go, lol. Any help is appreciated!!
Peter valve clearance on Toyota Corolla 4afe pse
Use a magnet to get the lifter out
Thanks for sharing 👍😀
This my tool this my valve
Thank You Sir.
or that should be 0.15 always
Hi, what engine size you have?
is 1zzfe i get the lifter new from toyota dealer every lifter have the same size i wanna if that need cut it because in the said 0.15 to o.25 in intake and exhaust is different..thank you for ur videos
i want to know if that need cut it the lifter for exhaust
And 2AZFE engines are b.s. Don't know how I managed to do a valve job on it without removing the engine.
Thanks for comment. 👍😀
I can't with your English man for real