I scooped one a while back , cars super fun and handles really well. Threw some 1/10 f1 slicks on the front along w a brushless and it came alive! All stock still holding up! Only downfall cannot find cvds for this thing ANYWHERE lol ! Hard launches caused one to slightly bend ..😩 thing gets down for sure!!
Estupenda 1era parte de la construcción del chasis MST TCR de tracción delantera 110, FWD Drag Civic Build, respetos y saludos desde Venezuela.💯💯💯💯👍👍👍👍🤘🤘🤘🤘🤘🤘💯💯💯💯💯
Love the work you do, knowledgeable and talented. That being said I’m 52 and I have a Associated TC3 that 24 years old. Still runs just not like it used to. Do you have and cheep motor/ speed control suggestions for some good speed? I still have a couple old packs that work fine for now. I don’t know how the motor ratings work. All I know are “turns”.🤨 Keep up the killer builds!!!✌️
Man I am still happy running a tamiya stock can motor. I think they are around 21 turn with a newer budget hobbywing 1060. But I run lipid on them and they give some “better than my childhood” speeds and runtimes. The motors are around $12 on eBay and the esc cost around $20.
I am liking this build, you just need very skinny bald tyres at the rear and larger slicks on the front how they are on the track I saw one watching one of the drag week uploads.
@@RCeveryday just moves to back? Is there room in the front between the tires Maybe for a toyan engine either single or two cylinder( my other idea for this)
It would be very tight. The rear suspension would move up front and there is still some structure for it. Those toyan engines are pretty large. The front and rear suspension will swap from to back on the chassis.
This chassis is adjustable wheelbase some. I didnt think that tamiya civic was any bigger. My chassis is the same wheelbase as all my tamiya ta02 chassis
I was looking in to getting one. Typed them un on the ol youtube and saw your video and thought oh yeah that's right. Did you ever do anything more with it. I was thinking of building a fwd drag civic. Just for the scale if the build
Lol, no it was in florida during the ultimate scale truck expo a few years ago. Was crazy to see a tom thumb, Im from texas and they all closed down here a long time ago.
There were all over the country, at least the south east. Still seen some in Georgia and florida on my trips. They were part of Randalls groceries. Only ever seen 1 randalls down in austin TX 15 years ago.
Is this a separate chassis from the VW golf? If so would the one you have for the golf work with your honda body and swap the one for honda to the golf. I just read the full title lol did see this one was the hondas chassis at first
You can call me crazy is possible to make that TCR dual motor, by buying the motor mount in that way you can have a dual motor, and need to buy the same parts on the front to use for the rear motor
Nice Instruction manual. Cooks my cannoli when you have to download a manual!
Sweet build my friend. Its going to be a game changer.
I scooped one a while back , cars super fun and handles really well. Threw some 1/10 f1 slicks on the front along w a brushless and it came alive! All stock still holding up!
Only downfall cannot find cvds for this thing ANYWHERE lol ! Hard launches caused one to slightly bend ..😩 thing gets down for sure!!
Excited for this build.
These are so cool. Looks like a fun build too.
I just got mine last week and I love it!!! I plan on doing the same drag build
I'm a sucker for these odd ball builds lol
It would be nice to see a civic body on it!👌😎👍
Estupenda 1era parte de la construcción del chasis MST TCR de tracción delantera 110, FWD Drag Civic Build, respetos y saludos desde Venezuela.💯💯💯💯👍👍👍👍🤘🤘🤘🤘🤘🤘💯💯💯💯💯
Hell yeah man. Going to be some good content for sure!
I wanna get this kit just looks minimalistic and is cheap ill get the Springs upgrades
Love the work you do, knowledgeable and talented. That being said I’m 52 and I have a Associated TC3 that 24 years old. Still runs just not like it used to. Do you have and cheep motor/ speed control suggestions for some good speed? I still have a couple old packs that work fine for now. I don’t know how the motor ratings work. All I know are “turns”.🤨 Keep up the killer builds!!!✌️
Man I am still happy running a tamiya stock can motor. I think they are around 21 turn with a newer budget hobbywing 1060. But I run lipid on them and they give some “better than my childhood” speeds and runtimes. The motors are around $12 on eBay and the esc cost around $20.
@@RCeveryday Wow, that was a quick response! Do they still make 6,9, and 12 turn motors?
12 turns are still being made I don’t know about 6 and 9 turn motors though haven’t looked into them
I am liking this build, you just need very skinny bald tyres at the rear and larger slicks on the front how they are on the track I saw one watching one of the drag week uploads.
Look up the boostedBoiz Honda prelude, something like that
For the cost, it seems like a good rig to just get and play around with.
Thats awesome I got a ek hatch coming from cody
Do you need to buy parts to mount motor to the middle?
It will mount if front, and rear with the motor either in the middle or rear right out of the box
Should have checked out the Tamiya FF-03. It is a superb FF chassis to build off!
Cool build how do you do mid eninge again?
The front gear box mounts on the rear of the chassis exactly how it sits up front. Motor will be forward of the rear tires.
@@RCeveryday just moves to back? Is there room in the front between the tires
Maybe for a toyan engine either single or two cylinder( my other idea for this)
It would be very tight. The rear suspension would move up front and there is still some structure for it. Those toyan engines are pretty large. The front and rear suspension will swap from to back on the chassis.
@@RCeveryday one more question can it be awd? As well if so how?
@@nsvaluto48328 Could be but you would have to have 2 kits and install the driven axle on both front and back with 2 motors,
I hate when I put the balls on the wrong spot 😂
What is the wheel base and width of this?
top esse chassis
Where did you get your hex driver and bits from?
The gold ones are from bow house rc. The rest is an old integy set
So I bought this kit to build and I have a tamiya civic body and it is to big for this chassis,so if there a extended chassis or something for this?
This chassis is adjustable wheelbase some. I didnt think that tamiya civic was any bigger. My chassis is the same wheelbase as all my tamiya ta02 chassis
THIS IS DAMN SWEET AND ITS ONLY $130
What did you end up doing with this chassis due to the move
It’s still packed
I was looking in to getting one. Typed them un on the ol youtube and saw your video and thought oh yeah that's right. Did you ever do anything more with it. I was thinking of building a fwd drag civic. Just for the scale if the build
Tom thumb in columbus?
Lol, no it was in florida during the ultimate scale truck expo a few years ago. Was crazy to see a tom thumb, Im from texas and they all closed down here a long time ago.
@RCeveryday that was a big shop? I thought tom thumb was just a lil shop here that sadly closed last year
There were all over the country, at least the south east. Still seen some in Georgia and florida on my trips. They were part of Randalls groceries. Only ever seen 1 randalls down in austin TX 15 years ago.
Is this a separate chassis from the VW golf? If so would the one you have for the golf work with your honda body and swap the one for honda to the golf. I just read the full title lol did see this one was the hondas chassis at first
I checked to see how it would fit that chassis but I’d have to cut the hood in this one too.
Awesome can't wait for part 2
You can call me crazy is possible to make that TCR dual motor, by buying the motor mount in that way you can have a dual motor, and need to buy the same parts on the front to use for the rear motor
That would definitely work
Okay lay it on us what's the $$. Thus is going to be badass leaf the back!
This chassis was only $100 from rcmart
Oh no you didn't. I've got my fwd drag car with custom molded body kit ready to race you bro