duct Welding 덕트 용접
HTML-код
- Опубликовано: 29 сен 2024
- 덕트 파이프 상,하 이음부에 간격이 붙은 곳을 표시, 용접 이면비드가 나오게 하려면 1mm 갭을 유지시켜야 합니다.
외부에서 1번의 용접으로 파이프 내부에 용접비드가 나오게 하려면, 파이프 사이 간격이 붙은 곳 그라인더로 홈 파기작업을 해야합니다.
Mark the gaps in the upper and lower joints of the duct pipe and maintain a 1mm gap to allow the welds to come out.
To allow welding beads to appear inside the pipe by one welding from the outside, groove digging should be done with a grinder where the gaps between the pipes are located.
es acero inoxidable, ¿por quie no se quema la soldadura por dentro?
The material is SS400 normal stills. Thank you for leaving the comments. If I have time, I will try to Google the subtitles.
선생님 용접 잘 봤습니다...👏👏👏
도움이 되었으면 합니다.