great welder! I have the same unit and bought it on sale. $250 in 2023 on sale in Ontario. Can't beat this unit, it's a keeper for light projects. I'm CWB cert. and honestly this is a really good buy. Tons of videos on this welder, USA version is the Titanium 125, just in green.
Planning to get this and send to The philippines, unfortunately we have 220V can you recommend inverter which i should get and what gauge/rate extension cord i can use Thank you
It went ok. I'll have to practice a bit more to get the bead right. I just needed to tack some nuts onto pieces of threaded rod to make hex bolts so it did the job for now.
I legit just bought one of these today. I'm a woodworker but I think welding could take my ability to create to a next level. I'm not going to lie welding kind of scares me.
I just bought this welder from Canadian Tire. I wanted to see how to install the spool of flux and how to feed the line through the machine but you skipped over it. I was also hoping you would explain the buttons on the front of the machine and how to remove and install the contact tip.
I tried inverter arc welder should have returned it was junk. Or It was faulty. But got this one now! How is the ground cable to clamp? I have a heavy duty one worth swapping?
Few tips. You're moving way too much, you should rest your hand down so you can keep steady and keep the stinger a uniform distance from your steel. Also let the bead catch up a little while you're welding, you'll have better penetration.
how many amps is your garage circuit breaker? i just bought 1 today its on sale when i run test the circuit breaker it keeps tripping. it doesn’t work on a 15 amps breaker
Cool. I was thinking of getting one of these 125i's when it goes on sale again. It is suitable for beginners? My needs are nothing too fancy. Just a custom fitting here and there.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
lets get to 1k
Thanks for the video! Just bought one and am brand new to welding. Keep up the great work
great welder! I have the same unit and bought it on sale. $250 in 2023 on sale in Ontario.
Can't beat this unit, it's a keeper for light projects. I'm CWB cert. and honestly this is a really good buy.
Tons of videos on this welder, USA version is the Titanium 125, just in green.
Planning to get this and send to The philippines, unfortunately we have 220V can you recommend inverter which i should get and what gauge/rate extension cord i can use
Thank you
Reverse the polarity
Just unboxed mine. Thanks for the demo. We’ll see how it goes
good luck with that
It went ok. I'll have to practice a bit more to get the bead right. I just needed to tack some nuts onto pieces of threaded rod to make hex bolts so it did the job for now.
Expensive at Canadian tire. Only to to Canadian tire on Sunday afternoons. I got one at princesauto on sale for $200
hello i do body work on car with 22 ga stell and i am doing a lot of hold,i buy the machine with 30mm wire,should i change for 25mm wire,thank s
I legit just bought one of these today. I'm a woodworker but I think welding could take my ability to create to a next level.
I'm not going to lie welding kind of scares me.
dw man im only 16 and I just grabbed it and started practicing on scraps. I say wear as much safety equipment as you can so u feel and comfortable .
Can you tell me what size tread is on a canadiantire mastercraft mig welder
Can you tell me what size tread is on a canadiantire mastercraft contact tip
I just bought this welder from Canadian Tire. I wanted to see how to install the spool of flux and how to feed the line through the machine but you skipped over it. I was also hoping you would explain the buttons on the front of the machine and how to remove and install the contact tip.
good video, body position is very important and get into the habit of steadying with your other hand and practice having them move in unison.
You should be able to do 1/4 steel with beveling and multiple passrd
yeah thats for sure.
Definitely, that machine and the Harbor Freight are the very same. Difference? The color.
FYI. You need to chip off the slag. Welds will be clearer.
I tried inverter arc welder should have returned it was junk. Or It was faulty. But got this one now! How is the ground cable to clamp? I have a heavy duty one worth swapping?
yeah if you have a heavy duty clamp definitely swap. The one on this machine feels kinda cheap and doesnt give rlly great connection.
Few tips. You're moving way too much, you should rest your hand down so you can keep steady and keep the stinger a uniform distance from your steel. Also let the bead catch up a little while you're welding, you'll have better penetration.
can you run it into 110 volts on a normal household outlet?
Yes, I use it in my garage all the time 110 volts is good.
how many amps is your garage circuit breaker? i just bought 1 today its on sale when i run test the circuit breaker it keeps tripping. it doesn’t work on a 15 amps breaker
You need 20 amp breaker
Yes can but you have to have 20 amp breaker
good little machine
How did you set the heat, when I press the trigger it doesn’t weld it just pushes out the wore
make sure u have your ground clamp connected and it is clean
Does this welder need gas for it.
not at all just plug into wall and use
this is really good video
Flux core give them a scrub with the brush to remove the slag and soot. Keep practicing its all about the seat time
thanks my flux core welds have definitely gotten a lot better
good video
cool video man
Cool. I was thinking of getting one of these 125i's when it goes on sale again. It is suitable for beginners? My needs are nothing too fancy. Just a custom fitting here and there.
I think its good for beginners especially on sale. quite easy to use and I have never welded before .
Have you tried aluminum?
I dont think you can weld aluminum with a flux core welder
No you can't
great
ok now you have a welder so make the go-cart metal
idk I'm not making another go kart for now
now you can build a better go kart