You talked about using a stand on the front only. For what it’s worth, they recommend not doing that. You’re only supposed to use a front stand in conjunction with the rear stand as it stabilizes the whole bike.
I have a set Venom Sport Motorcycle stands that I use on a daily basis. They're $70 a set and work flawless! I'd assume they're made by a similar company to the ones in this video. I will agree, the front seems sketchy but they work once you figure out how to keep them up there properly. I don't service the front very often so I haven't needed to get a Triple Tree stand. Although, if you're buying them might as well just spend the extra for the Triple Tree Stand version.
As a fellow Croc owner and lover, I suggest drilling and mounting those U bolts up front and ditching the clamp on the lift and keeping the front plate. Holds the bike way better with straps and you can still use the front and rear stands. Front the plate goes inside the stand. Hard to explain haha. I love my lift, I have the same one. Those stands i use as well. I have since added spools and changed the swing arm attachment to the spool attachment.
I didn't even need a second freeze shot when you lifted the front 🤣 but thanks I'm a go head and purchase this for my motorcycle which is allot heavier than a grom
Hey Tanner, I lost my GSD. She was a bicolor and looked a lot like Diesel. I got her from a breeder in the New Hampshire. I live in Ohio and was wondering where you got Diesel. I'd much rather find a breeder in Ohio. Diesel has wonderful temperament. That is usually a good sign that a breeder knows what he/she is doing. Thanks, Jeff
Jeffrey McMillan sorry to hear about your shepherd Jeff! :( diesel unfortunately did not come from a good breeder, and would not recommend them if they are even still in business, however I hope you find a good breeder and fall in love with a pup!
@@Straubberry Thank you. Hard to find a good breeder. Diesel really got my attention, however. Very cool how he's part of your channel. Nice job on the vids.
use ebay and paypal, sellers vetted. up to $ 50,000. money back guarantee you get what seller said and showed. they have same name products same price.
I always buy cheaper stands unless its a single side swingarm stand then it needs to be a bit beefier. With that tiny ass bike i would just strap it to the rafters with ratchet straps.
You’re removing a tire and doing a brake job. Did you forget about the title that says “cheap stands”. You could have tried to move the bike around, shaken it from side to side, just to show how sturdy or flimsy they are, but we got tire removal and brake job. WTF
You talked about using a stand on the front only. For what it’s worth, they recommend not doing that. You’re only supposed to use a front stand in conjunction with the rear stand as it stabilizes the whole bike.
I have a set Venom Sport Motorcycle stands that I use on a daily basis. They're $70 a set and work flawless! I'd assume they're made by a similar company to the ones in this video. I will agree, the front seems sketchy but they work once you figure out how to keep them up there properly. I don't service the front very often so I haven't needed to get a Triple Tree stand. Although, if you're buying them might as well just spend the extra for the Triple Tree Stand version.
As a fellow Croc owner and lover, I suggest drilling and mounting those U bolts up front and ditching the clamp on the lift and keeping the front plate. Holds the bike way better with straps and you can still use the front and rear stands. Front the plate goes inside the stand. Hard to explain haha. I love my lift, I have the same one. Those stands i use as well. I have since added spools and changed the swing arm attachment to the spool attachment.
Tanner I like the view from the desk /work bench your set up is PERFECT
Keep the bike vids coming! Tire change tutorial would be fantastic!
Getting the Grom Street Ready for the Florida Trip...Heck Yeah!!! 👍
What is the red table stand you are using?
I went with the NDC chain adjusters. They are so much better than stock
I have the same pair when I was doing the brakes and cleaning chain on my my Cbr600rr they was handy to have
I didn't even need a second freeze shot when you lifted the front 🤣 but thanks I'm a go head and purchase this for my motorcycle which is allot heavier than a grom
Another great video! Thanks for showing us those stands.
Suggestion. Get a clear/transparent mat to go on your desk so you can protect it from getting scraped up too much.
I had those, they worked alright. The rear one was better than the front for sure.
Another great video thanks for sharing , really wish i had one of those red bike lifts would make working on the bikes so much easier
Notice you did this with grom, would like to use it for my Rebel 1100? Any max weight? Please advise and forward a link.
Hey Tanner, I lost my GSD. She was a bicolor and looked a lot like Diesel. I got her from a breeder in the New Hampshire. I live in Ohio and was wondering where you got Diesel. I'd much rather find a breeder in Ohio. Diesel has wonderful temperament. That is usually a good sign that a breeder knows what he/she is doing. Thanks, Jeff
You get your ass out there and find that dog!
Jeffrey McMillan sorry to hear about your shepherd Jeff! :( diesel unfortunately did not come from a good breeder, and would not recommend them if they are even still in business, however I hope you find a good breeder and fall in love with a pup!
@@Straubberry Thank you. Hard to find a good breeder. Diesel really got my attention, however. Very cool how he's part of your channel. Nice job on the vids.
Definitely interested in getting one of those stands for our z650. Keep the videos coming man!
Get a better quality stand
Did you ever buy the stand
I know this is a really old video, but I'd love to know where the red lift that you use came from?
Harbor Freight!
Dead sprocket @7:04 😂
I’m more triggered by the claw hammer. You need a brass drift and hammer.
I've heard axles can rust if water finds it's way in there some how.
Throw some grease on them and they will last a lifetime.
When you going to be in FL? Coming to grom day?
How did you lift the front without using the paddock stand you’d just bought
"Fresh out of China ... I can smell the 'rona virus ..." I about choked on my coffee! 😅😅😅
0:58 that’s ironic 😂
That’s the stock chain adjuster? Did you get an aftermarket one?
Keep up the good work bro from london ‼👌💯🏍💨
👏👏😉 great video dude from R1 Greg 🖐️🖐️👌😁
You using it wrong you need to wedge the actual fork tubes in between the rubber on the stand fork tubes up higher on the bike ON THE FORKS!
Saw it right off. Lol.
is it okay to leave the bike on the rear stand for a whole winter?
What stand did you use to lift the front wheel at the end of the video. it looked like it was put under the motor.
\
7:00 you know you're supposed to put grease on that axle bolt right? thats why you have rust! lol
Brake cleaner works great for that caked on dirt
Would be more level if lifted toward the rear of the rear swing arm.
so can you use the rear stand on the front?
Those stands are pretty tight! Especially on under frame running exhaust system for sure. Lol I just roll with a milk Crate;)
What ratchet did you use
I’m thinking any bike over 600lbs would be struggle to use that on
this one how much brother?
Have the same stands. They’re good, but make sure you check the bolts before each use. They come loose.
Guess this works out well for a 300 lb bike wouldn’t trust these with a super sport or a bike over 350lbs
Dude. Try these things on a Bike, not a 125cc moped. I'm very curious to see if they can handle a big bike like a busa or a zzr.
use ebay and paypal, sellers vetted. up to $ 50,000. money back guarantee you get what seller said and showed. they have same name products same price.
I always buy cheaper stands unless its a single side swingarm stand then it needs to be a bit beefier. With that tiny ass bike i would just strap it to the rafters with ratchet straps.
😂😂😂
You cant use only a front stand. Do not put it down then do the front.
Sure thing!
Nice!
"I can smell the rona virus"! Crack me up.
Yessssss
Looks like you forgot to put back the spacer in the front wheel (right side)
You’re removing a tire and doing a brake job.
Did you forget about the title that says “cheap stands”.
You could have tried to move the bike around, shaken it from side to side, just to show how sturdy or flimsy they are, but we got tire removal and brake job.
WTF
Jesus saves ❤
RUclips fluffing
Fluff me
First like
The spacer still on the lift... by the edge 🤦♂️
He used aftermarket spacer on the wheel
@@slakk5093 oh !! Was worried about that one 😁
Cheers