Great video. I am installing the SCX10 III kit that I bought at my local hobby store and found the additional detail in this video beneficial for my setup. Thanks for making a great product! One question, do you guys make an XT60 power adapter/cable to power the DG-1 Dragon II?
Hi, recently I bought two vanquish vs410 kits but I’m having a hard time figuring it out how to install, please share some info or a video will be fantastic.
I just received my kit and I absolutely love it, but I have a problem I can't figure out for the life of me. When I run my crawler at full throttle or reverse quickly, my lights cycle through the modes on their own. Did I screw something up during installation?
@@charleshood2529 Unfortunately not. I emailed mytrickrc and their response was that "Sometimes the controller pics up noise from the motor and it causes that issue. It's rare, but happens on occasion. We are working on a solution, it may be necessary to add a small "magnetic" donut to the cable to choke out the noise." I did not end up trying their solution because I believe I ended up wiring my own light harness. Hope that helps at all.
The controller has two LED ports that have OFF + Three Levels of Brightness, and two ports that only turn ON at the brightest level. So Light Bar can be configured to only turn ON at the highest level.
Great video. I am installing the SCX10 III kit that I bought at my local hobby store and found the additional detail in this video beneficial for my setup. Thanks for making a great product! One question, do you guys make an XT60 power adapter/cable to power the DG-1 Dragon II?
Can this be connected to power off the transmitter? Is that what the UF-7 controller is used for?
Hi, recently I bought two vanquish vs410 kits but I’m having a hard time figuring it out how to install, please share some info or a video will be fantastic.
Hi we are here to help. It might be easier to give us a call through our website contact info. What receiver/Transmitter are you using?
Great video. I’m looking for this same kit with reverse lights minus the light bar. Can you help me out or do I have to order everything separately?
Please shoot us an email to contact on our website.
always great products
I just received my kit and I absolutely love it, but I have a problem I can't figure out for the life of me. When I run my crawler at full throttle or reverse quickly, my lights cycle through the modes on their own. Did I screw something up during installation?
Awesome, glad you like it. Can you shoot us an email at info@mytrickrc.com. Let us know what vehicle is it, and is it stock? Thanks.
Did you ever figure it out? Mine does the same thing
@@charleshood2529 Unfortunately not. I emailed mytrickrc and their response was that "Sometimes the controller pics up noise from the motor and it causes that issue. It's rare, but happens on occasion. We are working on a solution, it may be necessary to add a small "magnetic" donut to the cable to choke out the noise."
I did not end up trying their solution because I believe I ended up wiring my own light harness. Hope that helps at all.
I plugged the y splitter directly into channel 3 and left channel 2 alone. Channel 3 on my ttx300 transmitter now works like it should
There are directions in the box
How do you separate the switch on the led on the roof?
The controller has two LED ports that have OFF + Three Levels of Brightness, and two ports that only turn ON at the brightest level. So Light Bar can be configured to only turn ON at the highest level.
AWESOME BROTHER JUST SUBBED YOU
Thanks.
Could you add a link to your webpage ?
Sure, its: www.mytrickrc.com/shop/axial-2017-wrangler-light-kit/
Show,,,,,,