MINI Cooper S Coolant DRAIN, FLUSH & FILL & BLEED - What Type Of Coolant?
HTML-код
- Опубликовано: 1 дек 2024
- Get Peak Global: amzn.to/2uoLUxi
Get Grease X Mechanics Detergent: amzn.to/2uicoAs
My Car Guy Supply Guide: www.amazon.com...
Support My Site: amzn.to/2uicoAs
*Be sure to mix or buy your coolant such that it is suitable for the climate in which you live. Follow instructions on the coolant tester. A 50/50 mix is what I use.
Get a Coolant Tester: amzn.to/2dYqyyo
Get a Flush & Fill Kit: amzn.to/2dYpDhp
What type of coolant is the best coolant for the MINI Cooper?
Antifreeze coolant is often overlooked; out of sight, out of mind. So if your coolant hasn't been changed in a while, it's a good idea to go ahead and do that. It's also good to flush it before extremely hot or cold weather comes around. This way your cooling / antifreeze / climate heating systems will be working optimally when you need them most. Peak Global is silicate-free and phosphate-free and is an exceptional coolant for MINI / BMW, European, Asian, and Domestic; especially those that require silicate free and phosphate free coolants.
How to drain, flush, and fill coolant / antifreeze and bleed the system on the MINI Cooper S.
Peak Global 50/50
GTIN 00074804002430
UPC 074804002430, 0 74804 00243 0
EAN 0074804002430, 74804002430
Peak Global Concentrate AF2360
GTIN 00074804004076
UPC 074804004076, 0 74804 00407 6
EAN 0074804004076, 0 074804 004076
Flush Kit PKF0AA
074804015393
Subscribe: www.youtube.com...
Please like, share, and subscribe.
Support a DIY Car Guy:
PATREON: / adiycarguy
Check out my other pages and stay updated:
FACEBOOK: / adiycarguy
TWITTER: / garykist
INSTAGRAM: / garykist @@@
"We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites." This helps you get products that you need/want, while helping me make better content for you at the same time!
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
2024 your video is still helping people
Thank you for taking the time to show how to do this . I'm going to be attempting to do it in the next week or so on my 2003 r53 mini cooper s. 😊
The amount of precise information for a specific car, as well as general advice, coupled together made for improvement on something I've been doing for a while now. Subscribed for this!
Thank you, that's exactly what I (mostly) try to do, it means a lot to hear it, thanks again!
I experienced a failed R53 transmission (R53 AISIN) cooler. I was told these fail due to Antifreeze becoming acidic. My cooling system was a nasty thick sludge and I think my transmission got a little coolant in it.
R53 doesn't have a good straight pipe for those flush kits so save your $4. I used tap water and Dawn from my hose under pressure (yeah I know) to clean out sludge. I introduced water in the expansion tank's lower tube and the top radiator hose. I drained from the lower radiator hose. I ran the car a few times with low heat to circulate good and bad until the water was clear. I then ran through 4 gallons of distilled water before running 2 gallons of 50/50 Euro mix.
I then changed my AT fluid 3x, changed the filter and added 1 bottle of Lucas. A scan tool is a must to get the AT fluid temp for the fluid levels. 8 hour job, mostly due to all the start/stops and waiting for the fluids to cool down.
dont know if he said it in the video but the other bleeder screw is a 8mm just in case y'all wanted to know
Thanks for covering the safety issues, I was getting real worked up that you had the car on jack stands, lol. Seriously though, this is a great DIY with lots of great information. Keep up the good work and motor on!
haha gotta make sure people see, sometimes people really go crazy when they can't see the safety precautions on camera. Thank YoU!!
That tapping from the clutch! You can hide it with a straight pipe exhaust! Thanks for the help! Way more ways than just one. Hope u still have ur 53 and good luck.
very helpful, just aquired a 2005 cooper s r52, thanks a bunch, keep up the good work!
PGL coolant is good stuff. I believe it's one of the only coolants out there that are free of phosphates/silicates and 2EHA (a plasticizer)....AND is an extended life coolant. It's the stuff that I like to use if the OE coolant is unavailable. Unfortunately for me, it was not available locally when I was doing a coolant drain/refill, coolant tank replacement, and thermostat on my 2004 R53. Oddly enough, the local car parts store had BMW coolant in stock!
for sure, im glad they had what you needed, shipping would be expensive
Thanks dude you’ve saved me some money. I wait until the car is warm to open the lower bleeder then close that one and open the top ?
My 2002 MCS has a mechanical T-Stat. I know because I replaced it with a 180 degree one.
Hmm, I was hoping it would have a drain tap or something at the bottom than having to disconnect the hose. You would think it would. Will find out this weekend.
Love the mini but working on it... Sigh...
That would be nice if it had one!
Water steps after the fact: Can you please explain the process to run distilled water through system after drainage? Is there something special that needs to be done; like, having something on (like the heat), or a valve on or something, or just pour distilled water until it comes out clear?
Not that anyone one does it, but the mini specs blue coolant
My coolant wont come out of the bleeder valves with the reservoir cap off. Only when it's on. Is my thermostat not opening?
You never use tap or any other water to mix with antifreeze, only distilled water folks chemistry 101
Good Coolant Skip that Watered down stuff you know you have water If your doing this. I like a 60/40 mix myself
Hi my friend my coolant was spitting out of my coolant tank. Might you know the reason why? Its 2004 supercharged . Help
I had the same issue, the coolant was bubbling from the mid point of the tank. Ordered another one on eBay for $30.
Blown head gasket. Warped head.
very good video lots of info for DIY guys Gabe.
Another awesome mini pooper vid!
thanks! haha
So just to confirm. you compress air through the heater core hose that connects right to the thermostat housing?
yessir
Thanks bud, lot of good tips for the next change. Didn't know about that bleeder screw at the rear of the block.
Getting ready to do my LR hub bearing this week.
Peace,
Dave in the Adirondacks
Welcome Dave, and thanks for watching! **The bolt on the rear of the block is for draining, I wouldn't recommend unscrewing it, I heard it is some special bolt where the threads compress and make the seal and you have to replace the bolt if you unthread it. Best of luck with the hub, I have a vid on that too: ruclips.net/video/5Eyk-kuu8uY/видео.html
Nice work Dude 👍😎
Thank you sir!
So i did some cleaning the throttle body and might as cleaned the radiator.. now i put everything back together.. put fluid on the reservoir to max but since i flushed the radiator, it heats up x.x the hoses going to the radiator not getting fluid... i oped the bleeder next to the radiator but not the one in the back... its necessary to open it? Let me know thanks
yea do the back one
Would have been really helpful to mention at the beginning that you have to remove the air box and the thing next to it, and show how you did that :/
So... I’ve been trying to bleed the coolant using the bleed screw that is nearest to the radiator and no coolant is coming out of it, a little bit will after a short drive but next short drive and no coolant will come out... is this because I’m not using the second bleed valve??
Could be, definitely try the second bleed valve near the thermostat
Hey, great detailed video. Question the anti freeze don’t hv to be the “blue” bmw specific antifreeze? I just purchased a mini love it 😍
Thanks! Any antifreeze designated for european vehicles will work. Even the cheap universal stuff might be fine, as that's what my car had in it before I changed it lol.
"Pentosin NF" !!!
Why did u dilute the coolant further??
trow the garden hose in in until it come out clean and change the termostat whille you at it
Which hose did you use with the garden hose?
@@jakepollard8093 warm engine yes garden hose open in the reservoir for 1h every 20 minute after you come open the screw until you dont hear air out then close it then come back in 20 minute ... do it 3 4 time then put the cap on the reservoir
@@raymonthiboutot9709 Thanks.. but which hose on the cooper do I use? Is it the one that comes off the thermostat?
Well water will causing scaling in aluminum over a long period of time jfyi . Well water has high contents of metal vs city water usually
You really want to use distilled water from the store or just get premixed coolant. My cars are old so I just use well water lol, my water is pretty good, never had a problem.
Hello, similar question to the one I asked in the Porsche video, as it's been about 4 years, has the Global Lifetime coolant been good in this car? Particularly, have you had to deal with any heater core leaks?
I didn't have any problems, but I sold this car January 2019, so not sure if anything happened after then
@@aDIYCarGuy Thanks, I'm sad to hear the car is gone after all the work you put into it. The new owner is a lucky person.
Can’t I just shop vac the lower hose?
Just a quick on I can’t find the bleeder on the back of my engine I have the same engine as you
I would focus on the bleeder near the thermostat, don't worry about the one on the back, it's difficult to see or access anything on the back of the engine.
hello, quick question I haven't got the tool to reach the second bleeder is it ok to just bleed it using the one bleeder on the front?
Where's the thermostat at
How important is a coolant flush i think i could do with one but is it something that could be really harmful to my engine? it seems to run fine but my coolant is a tiny bit low and the last person to have the car had it 2 years no flush i have had it a few months no flush and the person before him i dont know but i cant see a flush in the paperwork so he could maybe done it himself and i will never know... its been at least 2 half years and my coolant looks ever so slightly rusty no foam or anything like that its not a blown head gaskit it just looks old and worn down
eh if it's pretty clean I wouldn't worry about the flush, really depends on your goals and the condition of the coolant. if there was oil in the coolant at one point for whatever reason, then I would do the flush.
Good idea on having the car on the trailer. I've never heard of mini life lol. Can i say Victorian life for my car ? hahaha. I feel like mine is a little simpler on my car to replace the coolant. also is it true you can reuse the coolant if there's no dirt in it?
Thanks and hahah yea you can say Victorian life for your car. I can imagine it's a lot easier for your coolant change. As long as the coolant is kept clean and isn't past it's service life, you can put it back in. I do. lol
a DIY Car Guy Sweet ! I still have to check my coolant with a hydrometer do determine if i need to swap it out. It's almost exactly lime my red and white truck to do it since it is the same engine. 5.0 life! Also I researched these engines are made from the Windsor company that makes the same engine as the legendary 351w
Jimbo Booth nice! do you know how old the coolant is?
a DIY Car Guy not sure. 5 years old? It sat that long
i'd put new coolant in
You need to specify what year your vehicle is. These directions do not work with 2007-2013 R56 Mini Cooper S vehicles.
Looks like my 2006 S
I have 08 Mini cooper s, is it the same process?
It's generally the same process for any car....might have to look up specifics for yours like bleeder location...maybe it takes a different coolant or capacity, etc.
All my 05 keeps blowing steam. Do I just leave it opened
Blowing steam from where, the bleeder or the coolant tank?
@@aDIYCarGuy hi so does mine and the sponge at the top of the radiator is soaked any ideas thanks
Very helpful!!!
My 2007 mini Cooper S doesn't look like your engine bay. I am so confused! :(
Mines a 1st gen and yours is a 2nd gen, newer style, different design
Fast orange is the shit
Thanks 😊
How come the mini pooper sounded like a lawnmower when you moved it 😐
😁
Thank you for the video brother. I was able to replace my coolant reservour,filled and bled
pregunta,lo puedes comentar en español?