I changed master & slave clutch cylinders in my 88 S10. It was a bear changing the master. I wanted to assemble and bleed before in installed, but couldn’t do it. So I installed and then attempted to bleed when it was in place. It was a royal PITA until I tried bleeding it from the slave, up through the master to the reservoir. I connected a hose from a bottle of fluid up to the open bleeder valve on the slave. Then I used the pump to draw the fluid up through both cylinders to the reservoir. Once air all out, closed off the bleeder valve on the slave and was good to go! That slave bleeder valve is in an awkward location.
A 1997 is no better a twist and lock master cylinder is my ass.. plug in line to the slave is a pain in my ass because off I was expecting it to snap in but hell no
I had to change the clutch slave cylinder because the S10 started having issues with shifting or basically putting transmission into gear. I started noticing hydraulic fluid on the ground. Since it’s a hydraulic clutch the only adjustment or issue you have is bleeding the air out.
Sorry but to answer your question if Replacing both items is highly recommended because of the higher pressure will cause old hydraulic oil seals to leak just like it happened to me.
I drove my S10 home from work and just when I got home it became hard to put into reverse and 1st gear. I checked my clutch hydraulic fluid reservoir and it was empty. I refilled it and it leaked out as soon as I pressed clutch.
I changed master & slave clutch cylinders in my 88 S10. It was a bear changing the master. I wanted to assemble and bleed before in installed, but couldn’t do it. So I installed and then attempted to bleed when it was in place. It was a royal PITA until I tried bleeding it from the slave, up through the master to the reservoir. I connected a hose from a bottle of fluid up to the open bleeder valve on the slave. Then I used the pump to draw the fluid up through both cylinders to the reservoir. Once air all out, closed off the bleeder valve on the slave and was good to go! That slave bleeder valve is in an awkward location.
A 1997 is no better a twist and lock master cylinder is my ass.. plug in line to the slave is a pain in my ass because off I was expecting it to snap in but hell no
Oh you have a different transmission it's on the outside how lucky
Buena información..uril.salu2 desde San pedro coahuila, mexico,eléctricos el rayo😊.good tips,thanks broh😊😊😊😊
This a 2.5?
What was the cause of getting the new master cylinder? And how do u adjust the clutch pedal to have a lower bite point?
I had to change the clutch slave cylinder because the S10 started having issues with shifting or basically putting transmission into gear. I started noticing hydraulic fluid on the ground. Since it’s a hydraulic clutch the only adjustment or issue you have is bleeding the air out.
Sorry but to answer your question if Replacing both items is highly recommended because of the higher pressure will cause old hydraulic oil seals to leak just like it happened to me.
What year s10 ?
1991
I mean ya don't have to change the master cylinder it's just that yours was leaking.
How would one know if the slave cylinder is bad ? I couldn’t get mine into gear
I drove my S10 home from work and just when I got home it became hard to put into reverse and 1st gear. I checked my clutch hydraulic fluid reservoir and it was empty. I refilled it and it leaked out as soon as I pressed clutch.
Cuantos cilindros es esa s-10
4
yea. so my s10 slave cylinder is internal. this looks so effing easy. if only.....
Dang only 15??
Make sure you watch this video on how you need to bleed Clutch Master Cylinder
ruclips.net/video/s6cVYgzCU18/видео.html