It is a spark gap radio transmitter. Which due to the the broad frequencies and large band width are no longer used for radio transmission but was great in early radio in the early 1900s
I wonder about a furnace ignition transformer, or maybe a microwave transformer. I think they're a higher frequency and I don't know if that matters but they'd sure put out more grunt.
Thank tou for posting this. But i don't know if it's helpful for me. My neighbours are listening to loud music every night between 12 am and 5 am..i want to fry their audio source and the next 100 that they will buy. How can i make the emp so that it will go 15 meters to that speaker???
Will increasing the number of turns on the coil improve range or effectiveness? Will adding a high voltage capacitor increase range? What wire did you use? Insulated or not?
That's why it's called an electromagnetic pulse/EMP. If it was an unchanging continuous field, basically no electricity would go into the electronics. Changing fields (due to turning on then off, moving, etc) generate electricity. I believe the spark gap is there to also make the field quickly collapse. I'm not sure if there's other reasons why it's used.
Olá, sou inscrito no canal. Será possível fazer um aparelho com 1 metro de raio de efeito, que seja capaz de desligar um aparelho ou mesmo queimar o seu circuito?! Obrigado Atenciosamente
because it cause the electricity to fire in short pulses rather than a steady current that way instead of just being a normal magnet it's a pulsing magnet which has a stronger effect on electronics
It's always a good idea to have subtitles on a video if your accent may be difficult to understand for some people. I personally feel the power of the content overrides that effect. GREAT VIDEO SERIES!
I'd like to make one of these for an experiment. We're looking to generate a field of about a 10 foot diameter using pulsed emf. But we would need something that does not generate as much noise and that would run MUCH quieter. Any suggestions on how to do so?
I know this is late but you can have 2 switches, first one to charge the capacitor, when the capacitor is done charging then press the second switch to transfer the current from the capacitor into the coil. It won't make sound and it will be more powerful too.
Reminded me of the slot machine i messed up in high school (in 1998 or 1999), just by using a piezoelectric spark generator from a lighter, and touching it to some metal parts close to the coin input. That just turned it off, and my friend lost the money he put into it, oops. Took several days before it was up and running again, so i guess something happened to it. I just did it out of curiosity though, since i allready had the spark generator after a few days of pestering my friends with it.
In 1938 the International Telecommunications Union prohibited this type of emission (called "class B") to get the last spark-gap telegraphy transmitters off the air, and it is still prohibited in all nations. Title 47 of the FCC regulations has the prohibition in a footnote at the bottom
Наука
I just found out this channel. This is internet gold. It is the perfect excuse I needed to get into electronics.
Looks like those tinfoil hats were a good investment ;-)
Yea, if your a robot... Needs a way bigger battery.
It is a spark gap radio transmitter. Which due to the the broad frequencies and large band width are no longer used for radio transmission but was great in early radio in the early 1900s
You say "as we could see the lamp turns on" but you edited that part out. You did show it later in the video but a heads up.
I noticed that too,around at time stamp 3:40
I think it is an editing error. Check 4:09
The Best Stooge
At first I thought it was because he messed up his camera but it did work later so idk.
Yes, "as we can see", actually do the "we can see" with something important seen. sigh.
3:13 This guy will definitely not win the award for the best video edition.
And his voice doesn't really help...
Thanks for the video. Which pulse generator module did you use? Can you mention the list of the components and schematic?
I wonder about a furnace ignition transformer, or maybe a microwave transformer. I think they're a higher frequency and I don't know if that matters but they'd sure put out more grunt.
Can you tell me about the capacitor that you used for this project
You should warn {although it SHOULD be obvious} about using this around those having a pacemaker.
Thx for the Intel man! I didn't knew this .
2 questions
1. How did you remove the terminals
2. Dose it actually destroy and fry alive elcetronics
i love this channel - glad i clicked subscribe !
the spark gap must be in the input of the coil? or it make no difference?
Was he using bare or enameled copper wire for the coil?
Which circuit you use in that box, from where I can get that circuit.
Can it be used on an electrical wire to cut the current?
Nice video, but cant we avoid the spark and the noise coming out of the gadget? Isn't it possible? Cant we make any such silent EMP device?
Can EMP generator transmit Wireless Electricity ?
What if it’s more powerful I was reading an article about military grade emps able to penetrate 3 feet is concrete
Tell me which equipments used to make this emp.
can you touch the coil whilst it is active?
@Ludic Science how many volts does this device generate?
I need to ask a question on the emp device
Very interested in seeing if this can be produced smaller with more power. And its magnetic field effects. New sub. Tyty
Anyone else find this video after watching the Lock Picking Lawer's video?
Me
Yes...!!!😁😅 someone is planning a HEIST...!!!🤣🤣
Ele consegue parar um medidor de energia elétrica digital?
Neat. Please demonstrate with radio and cell phones... can it block so that meetings or family dinners can be enjoyed?
What is the range and power of a device this size?
what is the ampere for this and is is safe to use on the human body and brain?
what is the amps and voltage?
Can you make one that floats need to go fishing and boat hunting?
Wtf, creí que sólo tenías canal en Español :0 Eres Grande!!!
Thank tou for posting this. But i don't know if it's helpful for me. My neighbours are listening to loud music every night between 12 am and 5 am..i want to fry their audio source and the next 100 that they will buy. How can i make the emp so that it will go 15 meters to that speaker???
Seems like you missed a demonstration at around 3:20 ...
Will increasing the number of turns on the coil improve range or effectiveness? Will adding a high voltage capacitor increase range? What wire did you use? Insulated or not?
Muhammad Khan my questions too
too much questions dudes go back to class
Platinum phones & computers shut
@@platinumphonesandcomputers and even you don't know nothing about that.
What is the purpose of the spark gap? Just to create pulses rather than a continuous field?
That's why it's called an electromagnetic pulse/EMP. If it was an unchanging continuous field, basically no electricity would go into the electronics. Changing fields (due to turning on then off, moving, etc) generate electricity. I believe the spark gap is there to also make the field quickly collapse. I'm not sure if there's other reasons why it's used.
@@HarrisonMartinson Can it be used on an electrical wire to cut the current?
thanks for sharing Ludic Science
What if you increase the number of windings-would it enhance the EMP output?
Yes, but there is a better method. Simply putting an iron core inside of the coil will significantly enhance the output.
Can anyone explain to me why you need this spark gap? Is it just to see if the circle is wokring or what?
Would this emp have any effect on digital electric meters?
It will have an effect on the display
I like your videos so much. Thanks!
how many mm of your coil was? 90% pure?
Amazing work!
What gage is your Cu wire? Is it shellacked/ insulated? Does. it matter on the number of turns or revolutions around the can? Thanks
+Chip Friday 24 awg. It is enamelled wire. 15 turns is 0k
Upto which range does it works
Feels so good to see him posting again regularly. Keep up the good work
Do you sell these? Or know where I can buy one?
i wonder the EMP generated is not strong enough to knock off the audio-video recorder.
Olá, sou inscrito no canal.
Será possível fazer um aparelho com 1 metro de raio de efeito, que seja capaz de desligar um aparelho ou mesmo queimar o seu circuito?!
Obrigado
Atenciosamente
Where is the link for previous video?
why do you need the spark gap, is it to make it pulse instead of just be an electro magnet?
+Alex Keadle yes
Can you tell me will this release static electricity from my body if I pointed it at myself ??
walk bare foot
Fantastic. Will this work against Skynet?
Against the first generations ? Maybe. But if the CPU were completely shielded with metal and used optocouplers instead of wires... nah
Love your Vids
Could you hide the coil by encasing it in a 3d printed part or does it have to be naked?
Yes you could
Ok how do i make onenof these and make it directional? For those dbags with 5000 watt stereos turned up wayyyy too loud at stoplights...
Dok Cutty i think you can make use of a faraday cage like structure, but still it's very short range.
3:27 when did we see that?
Just found your channel. And found it interesting.You showed how aluminum stopped the EMP. Does lead stop EMP'S also. Yes I subbed. Thank you.
+Tooter Plumber in general the emp is stopped by any material that is an electrical conductor
Ludic Science Thank you
what are all the ingredients
someone please tell me asap
Interesting experiment, I'll try it with a neon light HV transformer :)
Dang, I was hoping to win big at the slot machines... There goes my retirement plan D:
Keystone Science I see you in the comments everywhere I go!
You should teach us how to do one of those, but more powerful than that
You will
Same
I love your channel keystone
why we have to make spark gap instead of normal connection?
It is the spark that produces the radio frequency energy. The coil will radiate it. Early transmitters used spark gaps.
because it cause the electricity to fire in short pulses rather than a steady current that way instead of just being a normal magnet it's a pulsing magnet which has a stronger effect on electronics
how strong is it
It's always a good idea to have subtitles on a video if your accent may be difficult to understand for some people. I personally feel the power of the content overrides that effect.
GREAT VIDEO SERIES!
+Paul Neilson Thanks Paul!
Nice sir..lekin ye trick digital meter par kaam karenga Kya
We can use this for Tesla coil, this coil is use as primery
What does it do with smart phones?
I'd like to make one of these for an experiment. We're looking to generate a field of about a 10 foot diameter using pulsed emf. But we would need something that does not generate as much noise and that would run MUCH quieter. Any suggestions on how to do so?
Maybe a large capacitor
I know this is late but you can have 2 switches, first one to charge the capacitor, when the capacitor is done charging then press the second switch to transfer the current from the capacitor into the coil. It won't make sound and it will be more powerful too.
How did you protect your camera with alumnium foil without blocking the lens?
+LiuyoMZ I did not. The pulse only travels a few centimeters. Its power decreases with the square of the distance.
LiuyoMZ FLEur and the at home
Reminded me of the slot machine i messed up in high school (in 1998 or 1999), just by using a piezoelectric spark generator from a lighter, and touching it to some metal parts close to the coin input. That just turned it off, and my friend lost the money he put into it, oops. Took several days before it was up and running again, so i guess something happened to it. I just did it out of curiosity though, since i allready had the spark generator after a few days of pestering my friends with it.
Wormweed why was there a slot machine in your school lol
Tyson Romaniuk my high-school was nextdoor to a music/theater scool, and that's where the slot machines were, in their cafeteria.
What's the coil mm
Damn didn't realize Pedro was an engineer
how many windings
What will happen if we use this with a phone ?
The phone will off or not ?
It would turn off depending on the power and if left for long enough it could kill it permanently
wheres the caapacitor and transaformer?
Greater job sir
Thank you very much
hey why do you want a high voltage power supply? i dont understand
good ! I will wrap my entire house with metal insulation to protect it from the electromagnetic strike
Thank you
Can I buy it? Where?
That’s a very weak emp can you make a stronger one
Good for unlocking electric locks.
Emmm! Let me go to the kitchen to start with my spark lighter! 😂🤣🤣
Why do you need the spark gap???
en.wikipedia.org/wiki/Spark_gap#Radio_transmitters
Estoy suscrito a tu canal en español jaja haces un excelente trabajo
( ͡° ͜ʖ ͡°)
What about a subwoofer coil
I want to make a constant pulse generator to keep sharks away. Can you pls advise via email what to do
Klaus
How can I reduce th3 sound
Please make a video on bug killer bat
Nice on bud ty
👌
Can you please make this emp device?
what is the spark gap for?
en.wikipedia.org/wiki/Spark_gap
Cool I might make one
magnet wire or copper wire
ruclips.net/video/xOTunewtBYA/видео.html
poor calculator...
im glad someone else felt for the poor guy, i think he died, just as he was screaming "9"
German calculator, screaming 9 as it's being EMP'd.
NEEEIIIIINNNN !!!!!!!
DU...
DU HAST MICH...
DU HAST MICH GEFRAGT...
NEIN.
NEIN.
buena traducion amigo
danke
Not good because when you pressed switch zero.... this is a big problem
3:13 That was some test.
I'm convinced.
It was so strong he had to buy a new camera
I'm pretty sure that if you had a larger pinch (EMP), the Tin-Foil would not block it at all
you can use a 10 times stronger pinch but a slightly thick foil will block it
So a pinch that could wipe out a city block, a little piece of foil will block? That's Cool!
make a video on how to make that high voltage power supply
the one hes using can be bought on amazon. search for "high voltage generator" theyre under $10
i got mine for $2 on ebay
www.dhresource.com/albu_356664299_00-1.0x0/super-high-voltage-generator-high-voltage.jpg
If you put a cone of aluminum around the copper coil couldn’t you direct where the fields go
In 1938 the International Telecommunications Union prohibited this type of emission (called "class B") to get the last spark-gap telegraphy transmitters off the air, and it is still prohibited in all nations. Title 47 of the FCC regulations has the prohibition in a footnote at the bottom