4x4 Off-Road UTV Build - START to FINISH
HTML-код
- Опубликовано: 30 сен 2024
- From start-to-finish homemade 4x4 off road utility vehicle build made from used front wheel drive car parts, homemade tube frame and other homemade parts needed to make a car work. The whole project was built over a span of one year.
This is the last part of a series of a four wheel drive utility vehicle build to lessen the work load on my trusty 2002 Honda Foreman Rubicon TRX500FA. This partially answers the question "Why?" but for those who want to ask "why don't you just buy a UTV instead of building one?" I just want to say - I'm not made of money. UTV-s are ridiculously expensive, even the car I drive around daily is worth less (not worthless though!), hell, it is even worth less than my 2002 Honda ATV.
"How much HP will it have?" - the 1.4 litre FWD Peugeot petrol engine I'm using has 55 kw and this will not change, but the torque is tripled via the BMW E39 differentials I'm using to transfer power to front and rear axles.
"It will be too heavy!" - this project just like the firewood processor project does not have to float. And a heavier vehicle will handle better anyway when hauling heavy loads.
All of this fabrication is done in my tiny homemade workshop.
4x4 UTV build series playlist: • 4x4 Off-Road UTV Build
Stay tuned for future videos! Thanks for watching!
My other videos: www.youtube.co...
Support me on: www.patreon.com/DonnDIY
Follow me on: DonnDIY
#donndiy #homemade #4x4
Soundtrack:
Demon - JVNA (RUclips Audio Library)
Controlled Distress - Biz Baz Studio (RUclips Audio Library)
Burlesque Heartache - RKVC (RUclips Audio Library)
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
More fabrication videos on ruclips.net/user/DonnDIYvideos
At first I didn't notice, but there is no rear or side mirrors. Despite that, nice job!
How come the floor underguards you made in the chassis welding video weren't fitted in this video ? Thought they were a good idea 👍🏻
incredible ! what's next? a space shuttle?
Rock bouncer next. 🤣
Привет. Отличная работа. Чертежи можно купить у тебя? Тоже хочу что то подобное построить. Центральный дифф заваривал? Редуктор передний не изнашивается оттого что в противоположную сторону крутится постоянно? И для чего вал отбора мощности? Какая максималка?
I have watched all the episodes and this is simply incredible, how much work, and a meticulous one, dedication, knowledge and passion, i'm sure also the work behind the scenes (video edit) is putted into this magnificient build. amazing.
Well said
Согласен))👏👏👏
There are two things that gonna remain after the apocalypse when all humans are gone. Andrew Camarata's Castle and this UTV.
Great job Buddy! :)
I watch your work too, cheer...
Ooo kogo ja tu widzę😅
To teraz czekam na twoja wersję bolidu
@@Adam1991. a polish guy))
Fabulous build! Followed every minute! Looking forward to te next one!
I can’t wait to see the powered trailer he is gonna pull behind it.
tubli töö noorhärra..jätka samas vaimus ...ei jõua ära oodata milline sinu järgmine projekt on ...loodan et karoova sind väga kinni ei hoia ...edu jaksu ja jõudu nii sulle kui su perele ...
I've watched this epic build from the beginning and enjoyed every single video 👍. Almost hate to see it finished, hope you have more builds for us in the future. Thanks for all your hard work 👍👍.
The only thing I’d have done differently assuming I had your budget and skills is to have had the engine totally rebuilt before installation. You’ve put so much time money, and effort into this build! Great job!
Нафига его перебирать? Работает отлично. Шепчет!
that french diesel engine is rock solid👌
To není diesel ale benzín 😉
This is an achievement you should be proud of! I look forward to seeing your trailer and the places you go with it. Any idea what your buggy weighs?
Это невероятно! Отличная работа!
What other channels call Builds are just "put back together"s. THIS is a Build! A bespoke vehicle.
Отличная работа 💪💪💪👍👍👍
Der Kandidat hat 110 von 100 Punkte,
Auch wenn das Lenkrad immer noch auf der falschen Seite ist
TOP
Awesome dude! Next build a spaceship and give Elon a run for his money.
Looks great Donn, don’t forget the “loose nut” behind the steering wheel !!🤣. Thanks for sharing with us, enjoyed watching everyone of the videos on this project. Now I will brew a new pot of coffee ☕️ and get ready for the next ride. Totally awesome what you can do and not burn the barn down. Stay safe and keep having fun. Fred. 🙏🏻🙏🏻👍🏻👍🏻👏🏻👏🏻✋🏻✋🏻👊🏻👊🏻
Excellent job , looks really good . Engineering and mechanical skills in abundance . Now , whats the next build . Keep going excellent channel . From UK . .
You did an amazing job on this one, a massive undertaking and it turned out to be a capable off-road vehicle…
Only one thing is missing, the CUPHOLDER! 😁
Félicitation pour la fin de ce dernier projet !
Belle vidéo pour résumer la construction !
Merci pour ces belles vidéos de home made !
Bonjour, je suis de France. Dites moi le prix de cet engin, il pourrai m'intéresser. Il est clair que je pourrais vous l'acheter.
This workshop is incredible and the knowledge displayed is amazing to watch. You sir are a genius!
Nice build, it seems to work well. As an addition, If you plan on driving it in the forest, I would put skid pans on the bottom. Getting stuck with a stump in between the frame is not very fun. Unless the whole thing is light enough to pick up by hand and move off of the stump of course.
This. The brake-lines could use a shield as well, so a branch does not brake them.
Came out splendid my dude. Here's to you using it for years to come.
Each of your projects has become more complex. Ready to make a helicopter?
So awesome Projekt, Followed this Projekt from the First Screw to the Last 😊👌
Интересно следующая какая постройка?
Donn DIY arkadaşım tebrik ederim. Hurda araba parçalarından güzel bir UTV araç yaptın. Emeğinize sağlık. Kolaylıklar diliyorum.
OTTIMO lavoro 👍👍👍
Всегда жду новое виде,очень круто))
Donn I'm glad I didn't find you from the beginning only b/c waiting for the next video to come out would be torture. This way I can watch each series in its entirety as time allows. Btw, you deserve every compliment found in these comments. The 4x4 trailer [where I started], and this build have been outstanding. *God bless.*
Хорошая машинка получилась точка просто супер
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing
Жаль в школе такому не учат нынешнюю молодёжь...
Блиин,ну это круто ты сделал мужик,красавчик...
Я все видео смотрел,как ты его строял...
Väga ilus ja viisakas lõpptulemus. Edu uute projektidega!
Najbardziej niezwykły projekt jaki widziałem. Gratulacje!!! Naprawdę przydatne maszyna w lesie!!!
Офигенно зажигательная штука получилась! Производители всяких там мелких вездеходов да квадриков нервно курят в сторонке! С меня 100500 лайков. Ах да, можно ж только один лайк.
Absolutely fantastic skills, you Sir, are a pro! This is an exellent example of how much you can do yourself with the right spirit, knowhow and of course these fantastic tools. I have no doubt this had been done only with grinder, arcweld and wrenches, but it would have taken 5 years longer... :)
You know it's not just the many hours of skilled trial and error in the build but also the vision to see BMW axles and a small engine and turn them into an impressive and practical car. Well done!
Increíble.. hasta me gusta más que las orugas anfibias... como siempre lo mejor
Çok güzel tasarım . İşçilik mükemmel.
Я тоже такой автомобиль хочу 😍. Молодец очень круто получилось💪💪💪✌👍👍👍👍
Palju õnne!
хороша рпобота лайк
NICE!
Dude your Automobile looks like will survive in Zombie 🧟♀️ “apocalypse”
wow dude!! is amazing
Really cool job 👍
Ein hervorragendes Arbetstier mit sehr grossem Spassfaktor. Tolle Arbeit👍👍👍😊
Gran bel lavoro, bravissimo complimenti, mi dispiace che questo progetto sia finito spero che ne inizierai presto dei nuovi, ciao ciao 💪💪
Job Well Done Donn. From start to finish how long did this take you to build? Thanks for sharing, I enjoy your videos.
Looks Great i would seal the fuel tank with a fuel tank plastic product so it protects it from rust and from moisture
Просто шикарный автомобиль👍
The engine cover/guard looks like you're transporting chickens 🤣🤣
Hi Donn,
Congratulations, what a beautiful project it has been, and the end result is nothing short of spectacular.
Donn, your God given talent(s) are blowing me away.
Be proud my friend, you're one in a million.
Thanks for the video, and take care.
Truly excellent design and fabrication work, making a fantastic 4x4 utility vehicle. The BMW axles are a great way to reduce speed and get lots more torque to the wheels and the whole vehicle is 'well balanced' and looks great. However, the flaw in the plan is the drive to the rear wheels, being expected to also power the heavy four wheel trailer. The Peugeot differential will most likely not be limited-slip, so no power will go to any of the 6 rear wheels or one of the front wheels, once just one of the front wheels lifts or spins in mud. An easy part solution is to make the two front wheel brakes independent like on small tractors. Then if one front wheel spins, you can slow it down with that particular brake, to give power to the other -and of course the rear wheels and the trailer wheels. But IMHO it would be better if the Peugeot front wheel drive engine unit was replaced by an engine unit from a 4 wheel drive version of a normal road car, eg like the x-type jags. The engine unit could still have been mounted and used in the same way as the Peugeot engine and the BMW diffs etc, but the rear drive shaft from the Jag transfer box could have been used and routed sideways and then through a right angle gearbox (eg off a grass topper mower) and out to the rear PTO, -to power the trailer but a gear reduction would be needed before driving the trailer diff. This reduction could be on the vehicle itself, with different sprocket sizes, or in the chain cases inside the rocking trailer axle housings. As far as I know, the Jag is basically a front wheel drive car (70% front), with the rear wheels driven through a viscous coupling (30% rear), -which would have allowed for some 'slack' in the drive to the log trailer but would still drive the trailer when needed. BTW, I'm thinking of turning my Plasma cutter into the CNC version like yours if I can! Thanks for the inspiration videos.
Классная машинка получилась!!!
I guess this allows you to start some other project. What that could be is wide open. But I do enjoy watching you build things. Interesting seeing how your mind works with each video and design... Thumbs Up!
Awesome! Just awesome! Super fun to watch the whole build along the way and now to see it finished. Super cool!
Поздравляю! С окончанием проекта!!! 👍👍👍👍👍👍👍👍👍
Loved every minute of this build. You sir are one of the best out there. You have a skill set that most people would dream of including myself
Мало кто знает, но Магнус Карлсон свободное от шахмат время он проводит его в гараже.
Great job Donn. Thanks for taking the time to make these great videos of the whole build. It’s been highly enjoyable and inspiring watching you create this useful machine. I look forward to watching it in use during future projects. 👏🍺
So Nice!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!😁😀😀😀😀😀😁😁😁
Donny I have watched this build from start to finish and all I can say is totally outstanding. Every inch is a professional build , my hat is off to you sir! I am a ASE master technician and have watched you take on things that I have seen seasond tech struggle with and never blink an eye. Once again great job!!!
the rudder does not go on the right side of a car but on the left side because people get on and off the right side of the car to the sidewalk...
Step 1: Own a BMW or Buy a BMW
It's beatiful 😍♥️ good job!
👌👏👍✌️🥳
wow man it look awesome level 1000 !congrats!!!cheers from Montréal ,Canada :)!
Thank you for sharing your project, I looked foward to your posts every week. (Sunday Evenings).
I am inspired to now at the age of 56 to see what i can be achieved in a humble shed.
Cheers from Australia.
Last touch, fill in the hole in the steering wheel with a piece of plate with your logo on it.
Very cool build, UTVs are massively overpriced. I rebuilt a Suzuki Samurai with a six cylinder swap for a fraction of the cost and it is waaay more capable. Did you add the PTO in another video? I am curious to see how you got that to work...another transfer box?
The PTO is shown in this video - it is driven directly from the input to the rear differential.
I'm guessing the next project it the powered trailer then...
Nice Projekt.Excelent Work Dude.😀😀😀
вот это монстр получился 👍👍👍
I love it man!! So much work big respect🙌🏻🙌🏻🙌🏻
One day you will get your own wing in the Estonian national museum
Good djob
Классный аппарат получился 👍
Может пришло время попробовать построить что-то летающие ?
Donn you put the steering wheel on the wrong side!! 🤣 Just kidding! You did an amazing job as always! You are my favorite fabricator on RUclips. Much love from Florida USA! 🍻
Great job man!
Awesome job and great videos 💪👍👍😊
You,sir, are the MAN!! A manly man! A MAN among men! Men wish to grow up to be a man like you! Clint Eastwood and Bruce Lee had a poster of you when they were growing up! Conan the Barbarian and He-man were inspired by you! Superman hung himself with his cape because he knew he was nothing compared to you! The terminator leaks oil just thinking about you coming after him! Covid is scared of catching you! Well done,sir, well Fn done. How about a kickflip now?😁
Donn, excellent work as always!!! I am really looking forwards to you using that PTO for something.
Brilliant. What a great build. Excited for what's to come
Hi 👋 there man?!! Hmm you're a beast bro. Incredible work 👏 🙌
Thank you🙏
Классный проект🤘все сезоны смотрел))
That’s awesome workpiece and really excellent job and really I respect your thousands hours you spend for this amazing project congratulations 👍
Super 👍👍👍👍👋👋👋😁
Perfect job as always
looking great my friend love watching you accomplish great projects cant wait to see more
Masina kaalu ka umbes oskad öelda? Mis pöörderaadius võiks olla?
Kaalu saan varsti teada, kui viitsin kaalu peal ära käia. Pöörderaadius suurem kui ATV-l, aga seda oligi oodata. UTV-l roolivõim, seega kitsastes kohtades nikerdamine pole ka probleem enam.
Brilliant build. Enjoyed it alot
Tere kas oskad öelda palju see masin kaaluda võiks?muidu super töö
Hei, ei tea veel. Pean treila peale ajama ja kuskil kaalu peale sõitma. Suured tänud!
belle transformation d'une Peugeot 🤩! un excellent travail !👏👏🙏🙏🤘🤘
Congratulations, it looks awesome 👌!
I was taking a sip of my drink when he said "like a glove" and almost choked to death 😵😂
.
Stupendous build! I really like the end result. Very, very cool. You have an excellent talent for automotive fabrication. Any idea on the total cost of the project materials? And of how many hours of your labor?
Muito bom! Seu jeeptractor!
Отлично👍👏😆