I make a Steel Knot by Bending Rebar - Without HEATING - Metalworking Project.
HTML-код
- Опубликовано: 17 ноя 2024
- In this video, I make a Steel Knot by Bending Rebar, without using heat. This knot will be used in a future Industrial Style shelf bracket.
The knot is called a larks head knot.
I love the look of industrial-style furniture and rebar with knots fits right in with the look I like.
I hope you enjoy my video of the project, it was a lot of fun to make.
The main tools used were a Hammer and a bench vise.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJog...
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY
Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load.
easy when you know how .. great entertainment .. . loved every second .76 years old and learning something new every day .
Same age and learning more from You Tube than I did in all my working life. I learned a lot on my jobs from older experienced people and that was way more important and useful than all of my school years!
Thank you very much, I appreciate your comment.
@@lloydprunier4415 q!
@@lloydprunier4415 ,,,,p
@@GavinClarkdiy very cool to see this Sir. Thanks for sharing.
There are metal workers, and there are artists.
.........and sometimes they are the same.
Very entertaining. Thanks for the video. 👍
Thank you very much, I am happy that you liked it.
We've got vloggers, cars guys and nearly every music artist in the world on RUclips, but you sir are my favorite
Thank you very much, I am happy that you liked it.
I've been working concrete for 25+ years and I've never seen this done. I kept waiting for the SNAP! I can see this as handles on a smoker or tons of other stuff!
Thank you very much, I appreciate your comment, yes I have had some rebar that is terrible to work with over the years.
I cut and bend rebar for a living and never believed this could be done. Probably schedule 40
Your thumb nail worked perfectly sir. Never clicked on a video so quickly. Had to find out how in the hell you did that. Bloody legend.
Thank you very much, I appreciate your comment.
Сделано чисто по-русски. Тиски, отправка, светлый Ум и золотые Руки. Жму тебе руку, Мастер. Твори свои чудесные вещи. У тебя здорово получается. Я подписался. Уважаю твой труд.
Большое спасибо, я рада, что вам понравились мои работы. Привет из Австралии и добро пожаловать на канал.
@@GavinClarkdiy Москва шлёт Вам привет!!!
Eo ôi nhàn rỗi vậy..sao không hàn vào cho nhanh..vẽ chuyên
Video là cách tạo nút thắt mà không cần nhiệt, vâng bạn nói đúng có thể làm nhanh hơn, nhưng đối với video này, đây là cách tôi đã làm. Cảm ơn bình luận của bạn.
I think he has much better quality rebar than I've come across.
Avoid Chinese rebar
I have been tieing rebar for 30+ years and my knots never look that butyfull, great video.
Thank you very much, I am happy that you liked it.
@@GavinClarkdiy could you cut out a piece from the knotted portion and take high definition microscope pictures?
I'd love to look at the effect the work stress is doing without heat.
@@jonathangarzon2798 Hi Jonathan I am not using any of my rebar works, as structural stuff or to swing off, they are generally ornamental shelves etc, (I would be using much better quality steel if I was). Feel free to do these tests yourself on some rebar where you are, I don't have a microscope photo camera. BUT you can very closely see the most stretched bit of this rebar when I move the finished knot super close to the camera. I have no doubt in my mind that the rebar is weaker where I have bent it, if I bend it a few more times I can break it. Hope that helps
As a concrete construction worker, that would love to put a personal touch on my workshop at home...you are the man with ideas. I love it!!!! Keep it up!
Thank you, I guess you would get plenty of off-cut rebar to play with. Thank you for your comment.
@@GavinClarkdiy Oh yes, plenty, from 8mm up to 25mm hahaha
@@MikevanHattum Awesome, Have fun mate.
My Dad is a WW2 Vet and I thank him for teaching me to hunt and fish properly and safely
Now that’s really cool ! I’m gonna try that tonight on some old 3/4” rebar I’ve had lying around for years. I guess I’m gonna need a big ass vice though 😳
Thank you very much, I wish you the best for your project. You may need a long bit of pipe to bend it with too.
@@GavinClarkdiy yeah a long bit of pipe haha
Honest Simple Craftsmanship is the new Gold.
Thank you very much, I appreciate your comment.
Bender Bending Rodriguez would be proud
Very nice video sharing my dear friend
great work Sir, you had me scratching my head at the start!!
Thank you very much. I am happy that you liked it in the end.
Likewise
Likewise
Гавно у вас арматура люди, сырой металл, не китайской часом?
Human born to be creative
Thank you very much.
Awesome. I'm gonna do that and take it to work and tell my guys to figure it out. Thanx for sharing
Thank you very much, I wonder how long it will take them to work it out. Thank you for your comment.
Terrific! Brilliant!!Amazing!! Original!! Cheap and Luxury!!! Jesus bless you!❤️
Thank you very much, I appreciate your comment.
I expected you to turn into The Incredible Hulk and make the knot with your bare hands, but this method is great too!
Next time! Thank you very much, I am happy that you liked it.
As per my comment 3 seconds ago.
'Waiting for the strongman to make his own version"
The Hulk turning up would be eSpecial
Gavin, you are the man!! I build industrial furniture out of wood and black iron pipe. Now you've opened up a whole new round for me. -Rick, USMC
Thank you very much Rick, I am happy that you like it, I wish you the best for your projects. Greetings from Australia.
Now THAT is something!
Thank you.
Not exactly the knot i expected but a knot is a knot. Good work.
I felt chagrined once I saw how it was done. Well done!
My brain said tie a knot and I felt rather dumb when I realised there was an alternative way of looking at it. I love knots having been a sailor and outdoorsman but now I'll always be looking for ways to deconstruct knots to simpler elements. I now hope to create a collection of 'impossible' metal knots.
Thank you very much, I am glad you found something interesting in my video.
Very. Imma make about 20 an see how they sell.
This old man has still young power
Thank you very much, I appreciate your comment.
I love your knots and plan on reproducing a variety of them. I had shoulder surgery a week ago, so I’ve got months to plan it all out. You’re an inspiration!
Blacklandz?
Thank you I am glad you liked my video, I hope you heal up very fast, wishing you the best.
Mis respetos maestro, esto no se ve en ningún otro canal.
Saludos. 🙋👍👍👍👍
Muchas gracias, estoy feliz de que te haya gustado. Saludos desde Australia.
Amazing work. I keep thinking for Superman that would be like a piece of string.
Thank you very much, I am glad you liked it. Superman would bend that around his finger to make this, Hahaha. Thank you for your comment
Anything that looks that easy has got to be hard, very neat cant wait to give it a go
Thank you very much, I wish you the best for your project.
Great video, very inspiring! I can imaggine different fences and railings with elements interconnected like this, and also using diamond tread plates to make, say, spiral stairs in the same style.
Thank you very much, I appreciate your comment. You have some awesome ideas.
You, sir, are a true Craftsman.
Thank you very much, I appreciate your comment.
Great stuff Gavin, it suggests either an ornate door knocker, or a heavy duty gate latch using two or three heavy duty ring bolts. One would never think of rebar as an art material, but it surely is. ✌❤ Bob.
Glad you liked it Bob, you have some very good ideas for it's use, this knot I have just made will go into industrial style shelf brackets, I will get the full video of that up in a week of so. Thank you for your comment.
That's called a clove hitch my favorite knot never seen it in steel. Thx buddy ✌️😀🇺🇸
Thank you very much, I am happy that you liked it. Greetings from Australia.
ESPETACULAR
enjoyed Sunday morning neck tie for concrete man running last! Thank You!
Thank you very much, I am happy that you liked it.
Great, now I can make steel plate shooting target hangers that swing!
Thank you very much. I am happy that you liked it. That sound like a good project.
I was thinking that exact same thing my good sir to the garage and gun cabinet I go!
The speed and camera angles are perfect for recreating it while the video plays! Thank you for sharing your skills on the WWW..!
Thank you very much, I am glad it helped for your project. Just a hint, your comment went into a RUclips held for review because of the WWW.. They don't allow links in the comments, and it ended up there. All good, I appreciate your comment.
@@GavinClarkdiy hahah, really? Ok, Tnx again and greetz from the Netherlands.
@@martijnboer4437 Greetings from Australia.
Totally cool! Love to see a forged blade with That at the handle. Bloody marvelous.
Gavin, that was slicker than a snotty doorknob. I really enjoyed watching you work...
Thank you very much, I am happy that you liked it. I love your comment, awesome.
I saw a demonstration at a trade show in Atlanta, this guy was making flower's out of rebar...with no heat...I wouldn't thought it possible!
Nice job, really enjoyed 👍
Thank you very much. I am happy that you liked it.
Why someone gives a thumbs down? He or she must be unhappy, sad, miserable. Fill sorry for this person. Most definitely can’t change a light bolt . A like this mans work. Good on you mate. Negative people are not welcome.
Thank's a lot mate, everyone has different ideas and dislikes, all is good, I thank you for your support.
I'm really enjoying these knot works. Trying hard to find thin rebar here so I can give this a shot. Thanks for sharing.
Thank you very much. You could just play with round bar for a start, OR cementing/concreting mesh use small rebar in it, I have cut it out to get various sizes of rebar, it is a bit of work but the rebar is there. The people that lay the mesh may be able to help you get small rebar. Hope that helps a bit.
GREAT WORK gavin well Done 👍👍👍👍👍👍👍👍👍!!!!!!
Thank you very much Glenn, I am glad you liked it.
Me: Tell me you’re Australian without telling me you’re Australian.
Gavin: Today we are gonna bend metal without heating it.
Me: That’s not possib…. Well played sir.
Hahaha, thank you very much.
@@GavinClarkdiy ñnm
Brilliant ... Simple ... Fast... and Great!!!!
Thank you very much
Muy bueno inventó excelente pero me gusta más esa prensa vieja que es puro acero
...Impresionante... Fantástico. Saludos desde Barcelona Catalonia.
Всё гениальное, просто!👍
Basgusjiya moski bresnief ghjtdf ofski slikyaya
Been watching "Mr In Between". Now I think all Aussies are hard core mercenaries. This knot is surely going to be used for whacking someone... I just know it!
Not that knot, I have a bigger one for the problem people, hahaha. Thank you for your comment
"I'll show you how to make this not, and I'm knot going to use heat!"🤗
Hahaha
I'm from India just stumbled upon your channel and amazed to see your skill.
God bless you, love is all that we can give.
Thank you so much 😀
*_Да, ну и арматура сейчас пошла!!! Я с арматуры времён Брежнева, первоклассные зубила делал._* 🙄🙄🙄😎😎😎😎😎😎
то арматура у тебя была из стали пс или сп, а это кп, или какая там маркировка у буржуев)
Тогда было качество !!!!!! Слава СССР .
саша гемберг Арматура разных маркировок сталей идёт, есть более углеродистая, она калится хорошо, есть которая и не калится.
This is very very creative good day every one..
Thank you very much, I am happy that you liked it.
Thank you, it was both entertaining and interesting! It seems to me that those knots could be very useful and practical for things like some heavy duty rebar hangers to hang things from or maybe use a couple for a good base to hang a heavy duty shelf and probably many other things I haven't thought of yet. 👍
Thank you very much, I am happy that you liked it. You have some good ideas, I wish you the best with your projects.
I already figured out in what manner you had to go about this being it was a cold bend and not heat induced. However, how you actually went about it, I have no choice but to watch the rest of the vid. Love the wholesomeness idea of this vid. 💪
Thank you very much, I appreciate your comment.
That was great. There's a building site down the road.....guess what......I'm off to get some rebar.
Very cool, literally and figuratively.
Thank you very much, I am glad you liked it.
Yes to interesting as well as entertaining. Well done!
Awesome, thank you very much, I thank you for your comment
@@GavinClarkdiy Keep up the good work sir.
71 and learning. Loved the guitar music also.
Que bien, me sorprende tu habilidad, un abrazo fuerte amigo permíteme decirte que eres una persona buena, saludos cordiales desde Quito - Ecuador 🇪🇨
Muchas gracias, agradezco tu lindo comentario. Saludos desde Australia.
Fantastic bit of work there.
Thank you! Cheers!
Awesome! I can't wait to see where they go. I could also see them in a camp kitchen used as pot hooks - a few of them hanging on a bar like you show at the beginning and end of your video,
That's a great idea, pot hooks nice and rustic. These ones are going in shelf brackets. Should get the video up in a few weeks. Thank you very much for your comment.
Good idea. I wasn't sure where I could use these knots. Possibly hooks for hanging pots in the kitchen also. My cabin dosen't have a lot of storage space for them.
great tie-down loops for a trailer or truck bed
The thumbprint images of your beautifully formed 'ropework' were gorgeous and intriguing, ensuring that your video would be fully viewed.
To have achieved such perfect 'ropework' with cold steel certainly gets one's attention, and if I weren't already a subscriber I would have immediately subscribed!
Thank you very much, I appreciate your comment.
It's what caught my eye!
Cool knot.
That's one hell of a workbench and vice.
Thank you very much, I am happy that you liked it.
That knot looks really great, and your love and enthusiasm for what you are making shines through. When you slid the bigger rebar through the eye it got me thinking.. I reckon it would make a really nice railing around a deck or balcony. It would be time consuming and a lot of work, but definitely a conversation piece. Thanks for the video, I'm gonna like and subscribe and look forward to seeing more of your clever work 👍
Thank you very much, I am glad that you liked it. You are right it would look awesome on the railing. Thank you for your comment.
Great so amazing metal forming 👍👍👍
Thank you! Cheers!
Sensacional.A inteligencia e criatividade são gotas de luz.
Muito obrigado.
Paps your the man
Спасибо за интересное видео - thanks for the interesting video!
Не проблема, я рад, что вам понравилось, спасибо за комментарий.
Amazing how it is made, I kept thinking and thinking how is done, and is very simple, not easy, but simple.
Thank you very much, I am glad you liked it.
How do you determine the length you marked before making the 2nd bend, is it based on rebar size being bent or desired diameter of finished knot opening, thx great vid!
Well, I basically guess it, The rebar varies in size as sometimes there are more or less lumps on the sides. I generally put together the number of bits I need to bend it over and bend the tape measure over it and take a measurement. It does not have to be perfect, it is better to be a bit long than short, as it will just make the curve over the bars sit out a bit more. Hope that helps a bit.
@@GavinClarkdiy You guess it? Wow You have a very good "eye-meter" bro! I've tried but I get weird results all the times: it is either too big or too short for the purposes I have... not precise enough
I always measure what I am doing so if it does not turn out I know if it should be shorter or longer than the failed one. I am not a Blacksmith but they do most things like this without measurements.
I have a bubble in one eye and a crosshair in the other .
@@GavinClarkdiy
As you were marking it off my brain was saying 7 times the bar thickness. 5 for the wrap plus twice the bar. I wonder if you somewhere close to 2"? Great content anyway, thanks for posting this up.
Очень нужная штука. Давно о такой мечтал
Hi Clark, I wait the next effort. Always a pleasure to see you on the iron...Ciao Nick from IT
Thank you very much, I am happy that you liked it.
Greetings from Australia.
Wow thanks for sharing that, very nice sir .
Thank you very much.
I have a larger version of that same machinist vice has the red paint and everything, greetings from the United States!
Greetings from Australia. They are an awesome vice, mine has taken quite a beating over the years, yours would be a lovely vice, Thank you for your comment.
great amount of force used to bend those bars. Amazing stuff
Thank you very much.
кузнечный узел ))
Osghf ofsgth sgis sgsiyu mouskou barysfghjy osdgt mouz mouz og gaga
Clever - thank you. 👍👍😎👍👍
Thank you
That was fun, thanks for sharing this interesting technique...Be Well...
Thank you, I am glad you liked it. Keep safe.
🙂 👍
Simply Awesome!! Thank you!
Thank you very much for watching.
I was scratching my head initially... and yes it's entertaining.
This is insanely ... good !
Thank you very much, I am happy that you liked it.
How long was the distance you marked off starting off at 2:01 minutes to get your second bend. Real nice job by the way.
I think it was 52mm, but basically it is always a bit of a guess, I am using 7mm rebar, and that varies a bit in size too, plus some of the bars have more knobs on it that others, and that all plays with how long you need, but it does not have to be a perfect length, the curve will just be a bit tighter or looser if you are out a bit. Hope that helps.
@@GavinClarkdiy Thank you. 👍
Evergreen idea
No, actually I never have wondered how to make that knot in steel, but it was an interesting video. What I did wonder is how much time was spent figuring how to do it, ten how may tries to do that and then why?
That’s how great Ideas get started
I made these for industrial style shelf brackets, the video should be up very soon, It always take a few goes to get it right, but then it is in your head for future projects. Thank you for your comment.
Thank you very much.
Still did not answer the....WHY??? Why would I want to do that?
@@Jimbel500 For shelf brackets, he made them for shelf brackets.
FENOMENAL WORK MATE!!
Thank you! Cheers!
0:47 за...бись говорит:)))
Brilliant video again. Rebar is fantastic stuff.
Glad you enjoyed it, Thank you.
I'm willing to bet that vise is a Wilton!
There is no brand name on it, I have had it for many many years, and love it.
Awesome!more videos pls.🇵🇭
Thank you very much, I appreciate your comment.
Супер🔗👍
I don't know why I'm watching this but I love it :)
Thank you very much, I am glad you liked it.
И для чего это хрень нужна?
Шура Адлерский А хрен его знает, но очень познавательно. Может как декоративные стяжки и упоры.
дрон цкм применение можно придумать
Я использовал это видео с кронштейном для полки ruclips.net/video/wag18Qusr7E/видео.html
Good work sir. Hope those hand skills will not be lost and forgotten.
You and me both! Thank you for your comment.
Русскую арматуру так не согнёшь. Она выпрямится по зубам
Another nice peace of art from my northern New South Welshman
Thank you very much mate
Great ingenuity. Thanks for sharing this.
Not a problem, I am glad you liked it.
You are a smart guy.. congrats..
Thank you very much, I am glad you liked it.
Excellent work!.👍
Thank you very much, I am happy that you liked it.
Interesting and entertaining indeed Sir! Thanks a ton
Glad you enjoyed it!