Useful! I also have a Farberware dishwasher, a little bit different model, same error , and it was enough to do the tilt before, now it’s keeping giving the E4 error. I’ll try this trick. The other thing you should be looking for is a leak - if tha sterofoam inflated it took water from somewhere inside the machine, in place where water should not be. Good luck!
Yea, might have a small leak. You can see the wet spot when I pulled the panel off.. likely a drain hose or the pump itself. Can’t imagine it getting bad to where it’s going to cause me any issues. Maybe one day I’ll tip her over again and take a peak at the fittings…
Used a multimeter to test the switch and mine was a "normally open" switch so i just stripped the wires and twisted them together. Thanks for the assist
works also for the Bohann mini dishwashers!
Useful! I also have a Farberware dishwasher, a little bit different model, same error , and it was enough to do the tilt before, now it’s keeping giving the E4 error. I’ll try this trick. The other thing you should be looking for is a leak - if tha sterofoam inflated it took water from somewhere inside the machine, in place where water should not be. Good luck!
Yea, might have a small leak. You can see the wet spot when I pulled the panel off.. likely a drain hose or the pump itself. Can’t imagine it getting bad to where it’s going to cause me any issues. Maybe one day I’ll tip her over again and take a peak at the fittings…
Used a multimeter to test the switch and mine was a "normally open" switch so i just stripped the wires and twisted them together.
Thanks for the assist