I just picked a 2005 TTR125 that's has been sitting in my mother in law's garage for 14 years. I'm glad I came across your channel. Im wondering where you get your parts from?
Love your channel, i love seeing you giving life to mx bikes, it's really awesome! I'm gonna do your way of disassembling and checking all the parts (cleaning too),that way I'm gonna assemble it correctly! You are the best channel when it comes to dirt bikes, i love it, keep up uploading these interesting videos! Best of luck.
Cameron, I used that chain before. Worst chain quality i ever used, stretched every time we ran the bike. We used it on a kx80, so maybe not as bad on tt.
Kx80 has a lot of power and hit to it. Makes sense it would stretch a mediocre chain rapidly. Especially if it’s exposed to extreme mud and grime and it’s ridden really hard like on an MX track. Lack of maintenance will also ruin a chain.
Cameron I need help my ttr 125 keeps bogging I cleaned the jets and the float looks spot on I put a new spark plug and I’m running out of ideas my fuel/air screw is at 3 full turns please help
Cameron my nephew has a ttr125 and its always on high idle, we checked to see if it has the air mixture screw but it seems like its plugged up and the gas regulator screw is screwed all the way in, should he just buy a new carb for the bike.?
Very informative video. Can you tell me what type of camera you used to make it? We need to video some manufacturing processes at work and need that kind of clarity.
Sad to see the old Ronnie Mac front fender go... just take to the new one with a hand saw and she will be good to go. I have a wr250f its pretty sick. What do you guys (other subs) have?
9:46 bugged me so much, that was the last thing i liked dealing with when cleaning my bike or the carburetor. it always took me forever to get it on correct.
Cameron my man I have a question. I'm resembling my TTR 125 carb and on the air intake side of the carb there are two little jets one with a larger hole than the other. Which one is for the choke. Larger or smaller of the two. Im stuck .
I bought an all balls rebuild kit for my 02 ttr 125. Looking at diagrams of this carb. It says the fuel screw should have a spring washer and o ring. When I removed the original it had just a spring. No washer or o ring. Can anyone give me some help. Thanks
Where did you get the plastics, tires, carb kit from? Any links? Thank you so much, Sir. I’m learning from you and pulled apart my first carbs last night... thank you!
I'm bummed that there was no audio during the 1st part of the carb rebuild. That's the primary reason why I watched. Good information though. I'm needing to rebuild my daughter's 125
Were was it leaking from (I know from the carb) ,is it from the gasket? Im having an over flow problem and I can seem to find the sweet spot for my floats it's like no matter how I adjust them it still over flows gas when I shut the engine off ,if I forget to use the shut off valve I'll have a puddle of gas right under my engine.
Thanks again for these videos like I said before I’m learning so much from you haha I just bought a Yamaha ttr 230 I’m 50 years old and riding with my 15 yr old son he rides a gas gas 300
Hi mr I got a question you know more than my !! I got 86 Yamaha 125 and I like know if you know the name of the carburetor am looking a carb I just buy this motorcycle but the carb doesn’t came complete need the bottom part it hold with 4bolts even looking for the bottom top lead ! In case you know please let my know please thanks
Hey I have a Honda 125 it bogs when I take off fast but doesn't when I take off slow I cleaned carb jets set float as close as I could get it new spark plug set fuel screw 2 turns out and have gone in and out with that as well but no change anything else it could be.
My float bowl feels loos when i just took off my carb i shaked it and it sounded like somthing was loose os this normal, now that i have if out im holding the carb likenit was onnthe bike and the float is just bottemed out is that also normal or shouldnit be stiffer
Could you do a yz250 woods build next? Like buy a cheap project and build it i to a woods weapon. And make it look modern like a 2015? Would be insane.
Hay i have a yamaha xt125 r with more or less the same engine and carb the bike was stood for around 7 years i have good spark (new plug) iv fitted a new jet checked all the other vents and all seem to flow ok but i still dont think im getting fule in to the engine what else could i check on the carb
Next you should get a crf150f or 230f it was my favorite bike and I liked it more than my Crf250r! It is a absolutely amazing bike other than the restrictions and the stupid soft forks but you can swap them pretty easily! I’m planning on buying one again
That Raptor Guy The main jet may not be the only change. If the airflow has increased radically, you may require a step up in pilot jet size if you have to open the mixture screws up too far to compensate. In terms of what main jet size to run, that can vary between engines with the exact same parts. If you can, get a few jets of close sizes to the one advertised to work. When you change your jet, do some full throttle pulls down a road for a few hundred feet. When you come to the end of the run, shut the atv off while keeping the throttle wide open; don't roll off until you come to a stop. Pull the spark plug and use the coloring to determine your main mixture. Too white is lean, too black is rich. Tan is good.
Cool video! Learning alot on my TTR125. I was gifted one that didn't run, and have been using your videos to help get her running.
Awesome! Glad the videos have been helpful
I just picked a 2005 TTR125 that's has been sitting in my mother in law's garage for 14 years. I'm glad I came across your channel. Im wondering where you get your parts from?
THANK YOU! I am a new subscriber and these videos are sooooooo helpful! and thank you som much for including the tools in the description!
Love your channel, i love seeing you giving life to mx bikes, it's really awesome! I'm gonna do your way of disassembling and checking all the parts (cleaning too),that way I'm gonna assemble it correctly! You are the best channel when it comes to dirt bikes, i love it, keep up uploading these interesting videos! Best of luck.
Cameron, I used that chain before. Worst chain quality i ever used, stretched every time we ran the bike. We used it on a kx80, so maybe not as bad on tt.
Kx80 has a lot of power and hit to it. Makes sense it would stretch a mediocre chain rapidly. Especially if it’s exposed to extreme mud and grime and it’s ridden really hard like on an MX track. Lack of maintenance will also ruin a chain.
What does the t hose on top connect to going towards the tank? Does it not connect to anything?
Please don't stop doing this videos
What is that black hose he places on at 9:30?
My question too, mine doesn't have them and it concerns me lol
loving the projects bro, keep it up!
Cameron I need help my ttr 125 keeps bogging I cleaned the jets and the float looks spot on I put a new spark plug and I’m running out of ideas my fuel/air screw is at 3 full turns please help
Every vid is the best. Love this ttr build. Do more pit bike builds in the future
don't really want to put water in my tank, can i just use something else or does it need to be a certain amount of pressure? Great vids!
Can You tell me what kind of mikuni model is it?
Any tips on removing that old needle valve set? Mine definitely isn’t just popping right out.
YOU NEED TO START POWDER COATING STUFF AGAIN!!!!! would make for some great looking parts
Cameron my nephew has a ttr125 and its always on high idle, we checked to see if it has the air mixture screw but it seems like its plugged up and the gas regulator screw is screwed all the way in, should he just buy a new carb for the bike.?
Very informative video. Can you tell me what type of camera you used to make it? We need to video some manufacturing processes at work and need that kind of clarity.
Thank you. I used a canon 80D for this video
Great vid again mate . Really informed. Could watch your vids for hours 🏍👍🏼
Thanks!
Sad to see the old Ronnie Mac front fender go... just take to the new one with a hand saw and she will be good to go. I have a wr250f its pretty sick. What do you guys (other subs) have?
Russia approves this channel 👍
I would love that fender!
9:46 bugged me so much, that was the last thing i liked dealing with when cleaning my bike or the carburetor. it always took me forever to get it on correct.
That magic trick though
Cameron my man I have a question. I'm resembling my TTR 125 carb and on the air intake side of the carb there are two little jets one with a larger hole than the other. Which one is for the choke. Larger or smaller of the two. Im stuck .
I bought an all balls rebuild kit for my 02 ttr 125. Looking at diagrams of this carb. It says the fuel screw should have a spring washer and o ring. When I removed the original it had just a spring. No washer or o ring. Can anyone give me some help. Thanks
Where did you get the plastics, tires, carb kit from? Any links? Thank you so much, Sir. I’m learning from you and pulled apart my first carbs last night... thank you!
I get all my parts from Rocky Mountain
I'm bummed that there was no audio during the 1st part of the carb rebuild. That's the primary reason why I watched. Good information though. I'm needing to rebuild my daughter's 125
What a fantastic video thank you I just put my carb together
Were was it leaking from (I know from the carb) ,is it from the gasket?
Im having an over flow problem and I can seem to find the sweet spot for my floats it's like no matter how I adjust them it still over flows gas when I shut the engine off ,if I forget to use the shut off valve I'll have a puddle of gas right under my engine.
Lol the float wasn’t parralel to the bowl at all😂😂
Close enought xd
Thanks again for these videos like I said before I’m learning so much from you haha I just bought a Yamaha ttr 230 I’m 50 years old and riding with my 15 yr old son he rides a gas gas 300
I appreciate you watching!
Quick question...I lost the screw that holds down the plate that retains the seat. What size is it?
Please tell me you used a compressor to dry the carb before you installed it.
Nice to see that you get a lot of positive feeback. ATM you have 147 likes and 0 dislikes which is awesome.
Hey where did you get the plastic covered?
The ttr is looking fresh !!!!
Where do you get your parts from currently building a ttr 125
What would u recommended for a mini project 2 stoke to work over the winter ?
Cameron, que función cumple la manguera que tiene una T al lado del cebador?
You gotta love them Viton-tipped needle valves...
Hi mr I got a question you know more than my !! I got 86 Yamaha 125 and I like know if you know the name of the carburetor am looking a carb I just buy this motorcycle but the carb doesn’t came complete need the bottom part it hold with 4bolts even looking for the bottom top lead ! In case you know please let my know please thanks
Hey I have a Honda 125 it bogs when I take off fast but doesn't when I take off slow I cleaned carb jets set float as close as I could get it new spark plug set fuel screw 2 turns out and have gone in and out with that as well but no change anything else it could be.
Are you just running the stock jets?
4:20 the look on his face lol
Where do the carb hoses go from the T? Are they just to vent?
do you know what air filter you used? I have this exact bike and it doesn't even have the housing for a filter.
It was a No Toil
Can you please put a link on where to get the new float needle valve
My float bowl feels loos when i just took off my carb i shaked it and it sounded like somthing was loose os this normal, now that i have if out im holding the carb likenit was onnthe bike and the float is just bottemed out is that also normal or shouldnit be stiffer
i love your videos keep up the amazing work
Did you oil the airfilter?
I always oil my airfilter with a specific airfilter oil. I even do it on my pitbikes and stuff
No toil air filters come pre oiled
Pre oiled dawg
at 9:27 in your video. Where do the hoses that T off the carb go, and what are they for? Please help!!
Could you do a yz250 woods build next? Like buy a cheap project and build it i to a woods weapon. And make it look modern like a 2015? Would be insane.
Can’t wait till tomorrow🤗
That exhaust is on its way!
Thanks so much man! I really appreciate it and I'll put it to good use.
can you please link the parts you purchased for the carb? I would like to replace all of those as well
i just subbed, great channel. pls respond
Hay i have a yamaha xt125 r with more or less the same engine and carb the bike was stood for around 7 years i have good spark (new plug) iv fitted a new jet checked all the other vents and all seem to flow ok but i still dont think im getting fule in to the engine what else could i check on the carb
Replace the carb
Next you should get a crf150f or 230f it was my favorite bike and I liked it more than my Crf250r! It is a absolutely amazing bike other than the restrictions and the stupid soft forks but you can swap them pretty easily! I’m planning on buying one again
HOT SHOT 1500 had one as a farm bike, can get them leaned over real good and they are real reliable, they are also hill tractors.
Mota Man yep that’s how I remember mine
Hi i have a question?
Mi chok wire is broken but it won't com off can't get it out what sure i do
Moises QUINTEROS new carb mine is the same way
Great job..
Breaking stuff is always a blast!
It has the same carburettor as an xt125 but it doesn't have the carburettor heater andd thermo sensor
Thank you !
This guy is amazing!!!
Don't forget the choke circuit in the bowl for easy cold starts. ruclips.net/video/26b7ueqLr5g/видео.html
Cameron Can you do a video on What to change in the caburator When you've gotten aftermarket airfilter and bigger exhaust???
you want a larger main jet to accommodate for more airflow the pipe and filter are giving you.
Whatever exhaust you have will tell you what jets to use, then you just buy those jets and install them into the carb
Noneya fuckinbizniz Thanks
That Raptor Guy The main jet may not be the only change. If the airflow has increased radically, you may require a step up in pilot jet size if you have to open the mixture screws up too far to compensate.
In terms of what main jet size to run, that can vary between engines with the exact same parts. If you can, get a few jets of close sizes to the one advertised to work. When you change your jet, do some full throttle pulls down a road for a few hundred feet. When you come to the end of the run, shut the atv off while keeping the throttle wide open; don't roll off until you come to a stop. Pull the spark plug and use the coloring to determine your main mixture. Too white is lean, too black is rich. Tan is good.
ireland approves this lad
I want the old fender!
What does OEM stand for?
Original equipment manufacturer
I hate when the airflow screw is on the bottom of the carburetor! especially on the pitbikes, you have to remove the whole carb just to adjust them
Putting threadlock on the sprocket nuts is redundant as there are locking tabs. It cant do any harm though I suppose.
THANKS!!!
Can you do a video of how you run tge business I'm looking at starting in the UK
Jacob Foster You are second.
Hahaha. I like that magic trick!
goods information dude
Great video!
👍🏻love you videos keep up the good work
Good video really enjoyed it
Jordan Bates that's true
Why would you ever put water in your gas tank?
you should build a cr250
Great video!🤙👌
Great vid
nice video bro
The random editing at 3:28 lol
And then at 4:20
I love ur vids there the best
Notification squad wya?
Bike looks like it has some well earned hard used miles on it.👍
I was like number 5 notification squad
That Raptor Guy You are Fourth.
Lukas Radzimski nope
That Raptor Guy Sure. You were the fourt comment.
Lukas Radzimski yeah But like number 5
i love your videos
Omar Gísli You are third.
I have the same bike but my bike is not the l model
The float was no where near parallel.
a meu garoto do motorrois👍👍👍
hello can I have the Brocken fender
asmr mechanics :D French bigup :)
mint
CRF Madness You are First.
❤
DONT PUT WATER IN THE TANK!
eiso ai garoto domotorrois👍👍☝✌✌
eiso ai garoto domotorrois👍
mabuhay philippines
keep it up ;D