Janome Teardown Part 2, How to Adjust and What is it Made of?
HTML-код
- Опубликовано: 21 ноя 2024
- Continuing from our last video, Now it is time to see more about the Janome JW8100. We see how to make adjustments and maintain this machine. As well as the type of metal that makes up the frame.
Support the channel, be a Patron: / sewingmachinerepairguy
Learn more about me on my website www.sewingmachi...
Also I'm on facebook / sewingmachinerepairguy
Check out my Etsy store! www.etsy.com/s...
Some online resources for Sewing Machine Repair
s-ish.com/
www.manualslib...
store.tandtrep...
www.ebay.com/
Here are some of the products I use to repair sewing machines. These are affiliate links, they don't cost you any extra. They provide me a small commission if you purchase these products via this link. This helps me continue to provide videos for your enjoyment. As an Amazon Associate I earn from qualifying purchases.
Tri-Flow Sewing Machine Oil (my personal favorite) amzn.to/2XWMeSR
Tri-Flow Grease (my favorite grease) amzn.to/2Y1e28r
Bottle brushes amzn.to/3gVcohE
Nylon brushes amzn.to/3gQGenh
Makita vacuum amzn.to/2Xv2hrZ
Makita impact driver amzn.to/36WJwAI
Wera screwdrivers amzn.to/370qpFS
Starrett S423Z Steel scale set amzn.to/2Xy4pzn
Krud kutter amzn.to/2Bz7rLf
Denatured Alcohol amzn.to/2z0kSTk
Towa tension tester amzn.to/2U6Uq1O
Pliers, Parallel Flat Nose Smooth Jaw amzn.to/3gPN4JN
Magnetic Tray amzn.to/3oyVSaJ
Scripture quotations are from the ESV® Bible (The Holy Bible, English Standard Version®), copyright © 2001 by Crossway, a publishing ministry of Good News Publishers. Used by permission. All rights reserved. May not copy or download more than 500 consecutive verses of the ESV Bible or more than one half of any book of the ESV Bible.
Hai I am from India.
I have fased lot of issues in my brother fs101. Like E6,needle timing issues and tension issues. I have cleared that issues because of your videos. Your videos are very useful to me. Thank you so much Mr.Sewing repair guy.
Thank you for showing this Wes !, It is so nice for me to be able to see inside these modern machines, both the quality of materials and construction and strength. This one looks like it will last and not have mechanical failures for a long time, good job Janome !
Thanks so much for this series on the jw8100. I purchased this model in 2018 for under $200 as a warehouse deal! I use it to sew baby quilts with my church’s sewing ministry once a week with 10-12 other ladies. We each have our own machine and produce over 200 charity quilts and other handcrafts every year. Three other ladies also have this same machine, and it’s working out well for us. Since I sew once a week on this machine how often should I take it into the shop for maintenance? It’s 3 years old now, and not heavily used, except 3 hours once/week. I’m intimidated to take it apart and clean& oil myself. I do clean the easily accessed areas! I love seeing you take these machines apart! (So many intricate parts!). Great work and you have such a good spirit! You are greatly appreciated!
I would bring it in once a year for service.
Glad to hear I'm not the only one who makes sewing machine noises! Haha!
You like my impression? Maybe I should make more noises in my videos, lol.
@@SewingMachineRepairGuy you should man! Eng eng eng eng!!
This video inspired me to clean my machine, I haven’t done that in a while 😬. It was bad. Also how to I know what I need to oil? I checked my manual and it doesn’t have instructions for oiling under the maintenance section. I have a Janome Memory Craft 7700 QCP. I’ve also had it for 7 years I think and have never serviced it. 😬😬
Thanks! Have you done a breakdown of Janome HD 1000?
Thank you for the Videos. Very helpful to understand inside the sewing machine. I hope you have time to answer this question. I got a new bobbin holder and change it after the needle broke. Unfortunately, the upper thread get cut by the needle and does not sew at all. Would you please let me know what could be wrong? I have Janome Model 18750. Thank you
Thank you, Adjusting the needle bar. The ticking noise does it need moving up or down on the bar to adjust the needle
e
Nice video, thanks! Please consider How-to replace Jamone Presser Bar Lifter when it will no longer stay in UP position.
Any suggestions on how to unstuck a hand wheel on a Janome SW-2018E. I’ve already checked the bobbin winder, etc.
great video, for a janome mc 10001, how to adjust front to back needle alignment, recalibrated the needle hook clearance, now the needle slightly hits plate and is off centered front to back, have service manual dont see an adjustment for that?
Please show us too how to fix janome excel 20..especially the hook timing..thank you.and more power.
I am looking for a new sewing machine. I haven't bought one in 20 yrs and not sure which is a good machine to get
Just stumbled on your channel, fantastic job you do! I couldn't find part 3...missed it or in the making?
We have this machine and a lady had gotten a lot of thread wrapped around take up lever some how. We cleared it all out, but we still have the code Lo, sews alittle bit than stops. What are we missing?
Hi I really like this channel...mm haveave you seen the Janome 523h ? It seems like a nice home sewing machine to start but I can't find a good video review ...
Oi bom DIA queria saber Como Que EU abro a maquina janom dois mil e oito p fas um vidio Pra min por favor e Obrigado
My wife has a Janome 6130. She was using it & everything was working fine. She stopbfor a sec to adjust something & when she hit the button to begin sewing again, the machine made a sort of grinding noise & the needle won't complete the cycle by moving upward. The hand wheel is free & you can move it up & down, but it sounds like something is hitting on the down stroke, bottoming out. I removed the plastic cover & I can see a little metal "foot looking " piece that is attached to the needle bar. The little foot piece is hitting thr metal plate that the needle bar goes through. Do you you have an idea of what the problem is. I know nothing about sewing machines. I've never used one & do not know anything about them. I'm trying to learn. Can you help. I'd send pics & vids if I could
I'm thinking it's out of time. Or the set screws in the needle bar have loosened enough to allow the little foot piece to hit the plate. I just don't know
I were sewing a wile ago and my needle bar just make a noise and suddenly the bar get slack and it's not working.Can u please shun some light how to fix it thank u.
Hello, maybe you can help me with my janome fd216, handwheel stuck so I open the cover , the thread tangled and cleaned, the problem is now, I don't remember where I will put the 2 screws left now, I tried to run the sewing machine and cloth doesn't glide and doesn't create a stitch at all
I got a new Janome hd 3000 and I’m using the pedal but the machine won’t even thread. When I tune the knob on the side it’ll lift the needle up like normal. And I’m heating a clicking sound. Idk if I just got a faulty one bc the first one I got never did this.
Hi! Thank you!
My janome sewing machine needle doesn't go up and douwn it doesnt move
Hi I have a singer quantum 9960 for about a year and a half. I was sewing the other day and the needle in the mechanism start jumping around like crazy so I turned it off. The next day I tried to do decorative stitches and they turned out upside down meaning the decorative part was on the bottom and the messy part was on the top. Do you think you could figure this problem out
the inside of modern sewing machines reminds me of inside a cheap printer.
How do I fix a clutch problem on a 1974 Sears kenmore 158.10400 it’s like a slipping transmission on a car.
My Janome Horizon Memory Craft 7700 QCP is showing a F2 error code there is no threads around the needle bar and it won’t change needle plate hole.
Please show me tension repair and bobbin winding repair in brother fs101.
Hello sir this is Nisha from Pakistan my janome 9000 stops when I push the start button and does not work .all other functions are ok can you tell me the reason and solution
love itttttt
I know you need to show patrons, is is possible to place it where you are not covering up what you are showing. I have five Janome's. My husband is a mechanic and he always like the way the motor sound better than others he heard. He want buy others.
My embrodery part is stuck janome
I HAVE JANOME MACHINE CAN YOU DO REPAIR ,THANKS.
you rock man!!!
Mujhe lagta hai sar Meri machine janu bhi 8100 hai lekin start hone ke bad stop Nahin Hoti hai please sar bus Lal Karen
I'll stick to my vintage all metal mechanical Kenmores and Singers.
I've sewn on both and I have to agree with you these new cheap plastic parts are a real pain to deal with. I wish they would make an all-metal modern machine with a needle threader that was not computerized and programmed to break down. I'd love it if one of these companies would produce a modern hybrid machine to include:
*
mid arm comparable throat space
*great feet and precise build quality like the bernina records
* a built in needle threader
* janome qc model feed dog system.
* mechanical non compterized
*Few if any plastic heavy wear parts
*Great looking design and colors of the 40s. Morse machines for color or the really amazing engineering in the elna supermatics.
My Janome machine is saying E9
👍👍👍👌
Am Mina from Nigeria,I need to raise the teeth on a Bernina sewing machine
Is this a bible study channel or a sewing machine repair channel??
Pick one!
great video, for a janome mc 10001, how to adjust front to back needle alignment, recalibrated the needle hook clearance, now the needle slightly hits plate and is off centered front to back, have service manual dont see an adjustment for that?