You've just captured my rapt attention. I have a Husqvarna Viking sewing machine just like yours. A lot of bird nesting . My one issue right now is that in threading the upper part , is that I've been threading the Viking much as you do with the exception of after coming from the take-up lever I've been drawing the thread against that little curved wire then down to the needle . Only to get birdnesting . Very frustrating. To the sewing machine store I go . Figured I would have to ask for a cleaning. $ . I was helped by a very gracious woman who threaded my machine drawing the thread from spool to the first curved like thing , DOWN to the small guide , which I thought was used in needle threading the bobbin - up to the second hook thing , then down to the slot in the machine, up to the take up arm then down through BETWEEN the small curved wire and the machine case then slid the thread into a clip then to the needle. I see by your tutorial that the thread over the first guide then down to the small guide ( notch on the top and notch on the bottom ) then up to the second guide then down to the space for the take up arm was wrong. I'm assuming that the final small clip however was correct. I have the owners manual, and the technical illustration only shows half of that . Will follow for more tutorials on Husqvarna Viking machines. My machine seems to be older than yours , but identical. If you address the issues I've brought, it should be most helpful. Grateful that I found your post . Many thanks.
I have found that when reinstalling screws into plastic, or any material for that matter, if you turn the screw in the loosening direction (counterclockwise normally) you will feel a small click/detent/bump where the threads on the screw and the threads in the hole line up. At that point the screw, if threads were not previously damaged, will thread in smoothly. Most people who are new to using powered tools to remove/insert screws into plastic, and many who are experts, do not do this and do not realize when they have damaged the soft plastic threads by cross threading, which in turn will normally lead to overtightening, which in turn causes damage to or possibly strips out the threads in the plastic. I agree, while convenient, power tools should not be used on plastic items, at least not to install the screws. Good video and information, Thank You ...
I know nothing about mechanics or repairing sewing machines, but I am learning a lot from you. I would like to see a video summarizing the operator errors you have come across and what the symptoms of it were.
Hi - I have a Husqvarna Daisy 335 from 1999, which is very similar to this machine. Recently, with a new spool of thread, the thread started hopping out of the take up lever. Rethreaded multiple times but still the same issue. I am of the opinion the thread was stiffer than in the past (Gutermann thread.) I was able to solve the hopping issue by using the vertical thread holder instead of the horizontal thread holder. I can see this machine has the same set up for the vertical holder just to the right of the horizontal holder, there are two small openings one above the other. The vertical holder slips into those openings. It should hopefully be part of the accessory kit. If this is the issue for your machine's owner, this might help too. Love your videos! Thanks for all you do to help and educate sewists.
When I had my shop, I wouldn't let someone drop off a machine. When they came in I put it on my check in bench for a really quick look over. Threaded right? Needle in correctly? If I had the same case as won't pick up the bobbin thread and the threading and needle were correct and it picked up the thread for me, I'd ask the customer to try it. They may rotate the hand wheel backwards. You will surely hear "Young man, I've been sewing for 30 years" Get used to that. If the needle or threading are incorrect, I just turn the needle and thread the machine and show it sewing and tell the customer I can clean and oil it but most times it doesn't need that. Also when a customer picks up their machine, I always show it working and then pull the thread of and show how to thread it and install a needle. Sometimes they see something they were missing before. Thing is, When you repair a machine, you inherit it.
Nice video, Wes. Did I notice that this machine was a full rotary hook? Very unusual today. It also seemed to have a lot of metal inside. I'm sure the smoothness was due to the rotary hook.
Sewing Machine Repair Guy: I really like that you include Scripture. I just ordered a new Brother ST371HD for home use. I'm hoping you have video's on this model. The last time I sewed was with my mothers 40+ year old Bernina over 30 years ago any beginner tips would be helpful. I need to Hem Stretchy Polyester ,Denim Jeans and Heavy Straps for my Camping Gear Etc. I need to know the Needle and Thread choices. Do you recommend any books I might buy for this information maybe on Amazon. There are no Sewing stores near where I live so Online is about my only option .Thank You
Please machine guy. My singer heavy duty 4423 is stuck in reverse and I'm not getting any other stitches apart from straight stitch. I took it apart thanks to another one of your videos I cleaned it throughly and oiled it but its not working. I desperately want to sew again. 😢
I have a brother se 625 embroidery and sewing machine. Recently I saw a video that showdc the switch on the back to lower the feed dogs. Ok I moved the switch. Now the only way I can get them to come back up is to take the throat plate off, move the shift to hold the feed dogs in place. But the throat plate does not fit properly and down goes the feed dogs again. Please help. I don't have a local repair person. And I came across your video on hopes to fix this issue. Please I need help!!!
riceowls My kenmore 158 179282 seems to sew fine for basic straight and zigzag stitches. However, it will not perform the built in buttonhole feature. It doesn't make the bartack and it doesn't reverse direction. For regular stitching it does reverse. Also, the specialty stitches don't seem to work properly either. It's as if something is being left out and it may make a knocking noise, probably more on those stitches that require forward and backward motion. The machine has not had that much wear and was sitting up a lot after our move. I followed the manual and oiled it last night to get it ready for use again. Any insights? Are the cams somehow locked up? I guess I should take it in to the mechanic? Thank you.
What do you do? I'll tell you what you do. You clean the machine, tune it up a bit then charge them DOUBLE!! A stupidity tax!!😄 (Just kidding.) Just charge them as you would and go on to the next job. You should get paid for your time, at least. And tell them where they goofed up. Politely. This is the first notification I've received from your channel in a long time. Missed your vids. Hope you're doing well! 👍
Dude, what can you tell me about industrial serger/overlocker/chainstitch machines. On a whim, I bought a Union Special 39500FW. I bit off more than I can chew and swallow. I have a manual. Any ideas? It isn't stitching . Do I need a more elastic thread or will polyester do?
I have this type of issues with my old pfaff when I’m done with a stitch I have to bring the needle all the way up before I pull my thread do u think it might need to be lubed up ?
Hi I have jones sewing machine it’s only working for 10 minutes after treat off my electric fuse box in house so can you tell me what is wrong with it please ?? Thanks
Hello I have jemone craft machine 8000 Stop stitching like thread stuck in bobbin please help me I don't understand its need to change feeding dog or what to I do ?
At the age of four, I can't count the number of times I adjusted the tensionizer, and 're-threaded' the machine to hear my mother say ;"this darn thing, or Oh crap, it's out of time", etc. so yeah, talk to the kids.
This Sewing Machine Repair Guy is the best. I took to machines to him and now I'm so happy to be back to sewing again. Very glad I found him!!
You've just captured my rapt attention.
I have a Husqvarna Viking sewing machine just like yours.
A lot of bird nesting .
My one issue right now is that in threading the upper part , is that I've been threading the Viking much as you do with the exception of after coming from the take-up lever I've been drawing the thread against that little curved wire then down to the needle .
Only to get birdnesting . Very frustrating.
To the sewing machine store I go . Figured I would have to ask for a cleaning. $ .
I was helped by a very gracious woman who threaded my machine drawing the thread from spool to the first curved like thing , DOWN to the small guide , which I thought was used in needle threading the bobbin - up to the second hook thing , then down to the slot in the machine, up to the take up arm then down through BETWEEN the small curved wire and the machine case then slid the thread into a clip then to the needle.
I see by your tutorial that the thread over the first guide then down to the small guide ( notch on the top and notch on the bottom ) then up to the second guide then down to the space for the take up arm was wrong.
I'm assuming that the final small clip however was correct.
I have the owners manual, and the technical illustration only shows half of that .
Will follow for more tutorials on Husqvarna Viking machines.
My machine seems to be older than yours , but identical. If you address the issues I've brought, it should be most helpful.
Grateful that I found your post .
Many thanks.
I have found that when reinstalling screws into plastic, or any material for that matter, if you turn the screw in the loosening direction (counterclockwise normally) you will feel a small click/detent/bump where the threads on the screw and the threads in the hole line up. At that point the screw, if threads were not previously damaged, will thread in smoothly. Most people who are new to using powered tools to remove/insert screws into plastic, and many who are experts, do not do this and do not realize when they have damaged the soft plastic threads by cross threading, which in turn will normally lead to overtightening, which in turn causes damage to or possibly strips out the threads in the plastic. I agree, while convenient, power tools should not be used on plastic items, at least not to install the screws. Good video and information, Thank You ...
The ip about not using power tools was very much appreciated I was just saying you needed a power screwdriver. That’s funny
I know nothing about mechanics or repairing sewing machines, but I am learning a lot from you. I would like to see a video summarizing the operator errors you have come across and what the symptoms of it were.
I have an older version of this machine. Didnt know about the foot pedal storage. Thanks
Hi - I have a Husqvarna Daisy 335 from 1999, which is very similar to this machine. Recently, with a new spool of thread, the thread started hopping out of the take up lever. Rethreaded multiple times but still the same issue. I am of the opinion the thread was stiffer than in the past (Gutermann thread.) I was able to solve the hopping issue by using the vertical thread holder instead of the horizontal thread holder. I can see this machine has the same set up for the vertical holder just to the right of the horizontal holder, there are two small openings one above the other. The vertical holder slips into those openings. It should hopefully be part of the accessory kit. If this is the issue for your machine's owner, this might help too. Love your videos! Thanks for all you do to help and educate sewists.
Thanks for the advice!
When I had my shop, I wouldn't let someone drop off a machine. When they came in I put it on my check in bench for a really quick look over. Threaded right? Needle in correctly? If I had the same case as won't pick up the bobbin thread and the threading and needle were correct and it picked up the thread for me, I'd ask the customer to try it. They may rotate the hand wheel backwards. You will surely hear "Young man, I've been sewing for 30 years" Get used to that.
If the needle or threading are incorrect, I just turn the needle and thread the machine and show it sewing and tell the customer I can clean and oil it but most times it doesn't need that.
Also when a customer picks up their machine, I always show it working and then pull the thread of and show how to thread it and install a needle. Sometimes they see something they were missing before. Thing is, When you repair a machine, you inherit it.
much appreciate this--useful. The new angle is good
Nice video, Wes. Did I notice that this machine was a full rotary hook? Very unusual today. It also seemed to have a lot of metal inside. I'm sure the smoothness was due to the rotary hook.
I have three Vikings and all are rotary hooks. I don't think Viking makes an oscillating hook machine.
Excellent. Love your videos and knowledge.
Sewing Machine Repair Guy: I really like that you include Scripture. I just ordered a new Brother ST371HD for home use. I'm hoping you have video's on this model. The last time I sewed was with my mothers 40+ year old Bernina over 30 years ago any beginner tips would be helpful. I need to Hem Stretchy Polyester ,Denim Jeans and Heavy Straps for my Camping Gear Etc. I need to know the Needle and Thread choices. Do you recommend any books I might buy for this information maybe on Amazon. There are no Sewing stores near where I live so Online is about my only option .Thank You
I'm amazed that they're so expensive but such cheaply made plastice.
Please machine guy. My singer heavy duty 4423 is stuck in reverse and I'm not getting any other stitches apart from straight stitch. I took it apart thanks to another one of your videos I cleaned it throughly and oiled it but its not working. I desperately want to sew again. 😢
Oh, like an old truck, , , lose nut behind the wheel thanks for the video.
How to assemble and adjust the machine so professionally, brother
I have a brother se 625 embroidery and sewing machine. Recently I saw a video that showdc the switch on the back to lower the feed dogs. Ok I moved the switch. Now the only way I can get them to come back up is to take the throat plate off, move the shift to hold the feed dogs in place. But the throat plate does not fit properly and down goes the feed dogs again. Please help. I don't have a local repair person. And I came across your video on hopes to fix this issue. Please I need help!!!
riceowls
My kenmore 158 179282 seems to sew fine for basic straight and zigzag stitches. However, it will not perform the built in buttonhole feature. It doesn't make the bartack and it doesn't reverse direction. For regular stitching it does reverse. Also, the specialty stitches don't seem to work properly either. It's as if something is being left out and it may make a knocking noise, probably more on those stitches that require forward and backward motion. The machine has not had that much wear and was sitting up a lot after our move. I followed the manual and oiled it last night to get it ready for use again. Any insights? Are the cams somehow locked up? I guess I should take it in to the mechanic? Thank you.
What do you do? I'll tell you what you do.
You clean the machine, tune it up a bit then charge them DOUBLE!! A stupidity tax!!😄 (Just kidding.) Just charge them as you would and go on to the next job. You should get paid for your time, at least. And tell them where they goofed up. Politely.
This is the first notification I've received from your channel in a long time. Missed your vids. Hope you're doing well! 👍
Dude, what can you tell me about industrial serger/overlocker/chainstitch machines. On a whim, I bought a Union Special 39500FW. I bit off more than I can chew and swallow. I have a manual. Any ideas? It isn't stitching . Do I need a more elastic thread or will polyester do?
I have this type of issues
with my old pfaff when I’m done with a stitch I have to bring the needle all the way up before I pull my thread do u think it might need to be lubed up ?
I should open ip my old one and check what's going on,,,just bought new one,was about to throw in the garbage🤩
Have you work on a Husqvarna White computerize machine. Model 7700.
Hi I have jones sewing machine it’s only working for 10 minutes after treat off my electric fuse box in house so can you tell me what is wrong with it please ?? Thanks
Thanks!
Hello I have jemone craft machine 8000
Stop stitching like thread stuck in bobbin please help me I don't understand its need to change feeding dog or what to I do ?
You use mineral oil to lunricate?
At the age of four, I can't count the number of times I adjusted the tensionizer, and 're-threaded' the machine to hear my mother say ;"this darn thing, or Oh crap, it's out of time", etc. so yeah, talk to the kids.