All problems seem to be fixed, powerful and high speed plane. When do you come with a factory VTOL with Ali Express? Kris, sorry, where can one get the conversion kit and firmware?
Can you accomplish a long range distance by waypoint/ GPS navigation to prevent a communication failure between the controller and the receiver inside the drone? For example, the distance range between drone and controller is 50 miles, but you want the drone to travel 100 miles. Can you set the drone to follow that distance using the GPS waypoint instead of relying on the controller distance range
I have added Thrust differential, Fixed wing vector and Throttle scaling, Copter/Fixed wing I also separated their AHRS, because the X8 flight characteristics are very different from the regular Fixed wing, so I modified a lot of code.
@@kris968658 Thank you very much for the answer. If i am not an advanced user who can built the firmware from your shared source file. Do you think It can do vtol and transition using the convertion kit and standard APM 3.8 Firmware??
Hello Kris, do you modified the Arduplane firmware yourself? I want to use the single tilt motor for forward motor in Fbwa mode. Where can I download your firmware?? May I kniw your email?? Thank you.
What is the difference in flight parameters, payload weight and flight time with a scheme with three rotating screws and a variant with four screws. VTOL version. Can it really fly with a payload of 2kg?
www.dropbox.com/sh/ircqhf6phsgagk3/AAA_Cw3VwoHm2o_viCWHZJj9a?dl=0 We didn't consider making it in English initially. so GCS and instructions are only Chinese. I am translating the Chinese tutorial into English...
@@kris968658 would be awesome if u could translate it! I am working on a very similar project, but from the aerodynamic side... I try to optimize the shape of the wind for maximum range. Same motor/tilt configuration you have though.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
simply amazing!!!, great job!
Thank you :)
One the best diy vtol
Hi kris can get your email address
please share the details about what parameters to change for all the three motors to tilt. tilt mask and tilt type
This is still the best example out there!!!!
oh damn, that's a good idea about using the dynamic forward tilts for yaw, one less servo hmm
Hello Kris, can u tell which components i can buy, i want this also ... including the RC
You make it look so easy!!
Skywalker... Now to Google and click links. Hummmmm. Definitely like the Y3 configuration!
Used ground effect at landing ?
All problems seem to be fixed, powerful and high speed plane. When do you come with a factory VTOL with Ali Express? Kris, sorry, where can one get the conversion kit and firmware?
Hi kris! How did u setup tilt controlling? in radio or parametr if in radio. Do u use flight modes switches or other switch .I am so nervous about.
...that ceartinly took the fun out of flying...
Nice nature there .
其实尾桨可以做成固定，在平飞的时候停止旋转，这样会提高稳定吧
How to make it?...plz upload a complete video.
good job,how do u assigned pitch for rear servo and yaw for front both servos ??
Can you accomplish a long range distance by waypoint/ GPS navigation to prevent a communication failure between the controller and the receiver inside the drone?
For example, the distance range between drone and controller is 50 miles, but you want the drone to travel 100 miles. Can you set the drone to follow that distance using the GPS waypoint instead of relying on the controller distance range
use a companion pc and 4g dongle to have connectivity and perform telemetry
great work!. Did you add any thing to compensate uneven thrust in FBWA mode just in case the construction is not perfectly symmetric?
I have added Thrust differential, Fixed wing vector and Throttle scaling,
Copter/Fixed wing I also separated their AHRS, because the X8 flight characteristics are very different from the regular Fixed wing, so I modified a lot of code.
@@kris968658 Thank you very much for the answer. If i am not an advanced user who can built the firmware from your shared source file. Do you think It can do vtol and transition using the convertion kit and standard APM 3.8 Firmware??
very well, whats the max flight time/lipo?
Outstanding job
can you give me how to seting step by step in ardupilot
What a amazing Job!
Which flight controller did you use?
Arduplane V4.1.0 + Pixhawk
ruclips.net/video/5O69punvcqo/видео.html
Which.city do you live ?
Hello kris
i wondered if you could help me for x8 landing gear i wanna have rertactable one
do you know anything about it????
item.taobao.com/item.htm?spm=a230r.1.14.19.317e4c25Lrw0e5&id=565417544318&ns=1&abbucket=2#detail
item.taobao.com/item.htm?spm=a230r.1.14.241.317e4c25Lrw0e5&id=543643809247&ns=1&abbucket=2#detail
Contact the seller :)
Hello Kris, do you modified the Arduplane firmware yourself? I want to use the single tilt motor for forward motor in Fbwa mode. Where can I download your firmware?? May I kniw your email?? Thank you.
Firmware & tutorial
docs.google.com/document/d/1jLnl961CtEIqAq_3oh9jk35Kpcnx4j1u-kH0-5ZXLL8/edit?usp=drivesdk
It can be a military UAV.
Nice! So smooth!
I like it - great work
Awesome 👍👍👍
Love it great video
What happens to tail rotor if you land in long grass?
Perfect 🎆🎆🎨
what size motor, prop & esc?
Hi, Im interested in your conversion kit, how can I get it? Best Regards
Pixhawk ??
What is the difference in flight parameters, payload weight and flight time with a scheme with three rotating screws and a variant with four screws. VTOL version. Can it really fly with a payload of 2kg?
Muhteşem!
Where can we download the free firmware
www.dropbox.com/sh/ircqhf6phsgagk3/AAA_Cw3VwoHm2o_viCWHZJj9a?dl=0
We didn't consider making it in English initially. so GCS and instructions are only Chinese.
I am translating the Chinese tutorial into English...
@@kris968658 would be awesome if u could translate it!
I am working on a very similar project, but from the aerodynamic side... I try to optimize the shape of the wind for maximum range. Same motor/tilt configuration you have though.
@@kris968658 Thank you so much for your sharing!
Impressive
How can I build it that way?
good job!
Çok Güzel
Can l buy one ?
Where to buy convertion kits?
Where to download modified fw?
Where to download instructions?
You can buy the conversion kit on taobao, otherwise contact neilarmstrong54321@gmail.com
Can it fly over 100 miles distance?
Use a companion Pc paired to a data dongle to extend the telemetry range
Which remote?
where can I buy one or get the info. to make one?
hi, can you give me a contact email please ? Thanks.
Super
請問進入三個馬達同時推動的平飛巡航模式是否功耗較低
这要看情况。
如果长距离直线前进，电流：单发8A ，双发10A，3发12A。
如果短距离来回作业频频转弯或爬升航线则倒过来。
@@kris968658 有點超乎我預期，原本以為三發一起工作效率較高電流會更低
@@rcokressk791 是看情况，如果单发需要更高油门才能维持空速则效率降低，例如大逆风/爬升/转弯/增重，此时就得切换成双发或3发有利
。
尤其是转弯时双发除了副翼(飞翼)还有左右差速及 roll 矢量改变推力线来协助轻松过弯，所以同面积的作业测区单发转弯半径大要走更长的路且侧倾也大需要更大的油门来维持空速。
所以航测作业双发有利，巡检巡线则单发有利。
Great great Job!! Amazing. Where can I buy the conversión kit with instructions?
老師請受我一拜
You could charge $500 for this mod and get it easily! Nice!
０．０