Thank you for watching our videos! Makes us smile! It’s funny but I enjoy going down into the engine room and learning and watching Derek’s ideas 👩🔧. Jen
Nice work. Thanks for sharing. Wish manufacturers would just supply a set of any specialty tools needed, esoecially if for a fairly routine service like adjusting the stuffing box. Not likely one would be able to adjust the stuffing boxes at sea without your shortened wrench.
Yeah it would have been difficult that’s for sure. So important to have the right tools with us when we cruise around. Nothing worse than not having what you need. 😊
Hahahah!! A little side Channel for Nordhavn dreamers with the maintenance side of it lol. Good idea hahah. Boats are maintenance but it’s all worth it!!!
The corrosion may be coming from water slinging off your shaft seal. Cut up a plastic bottle for a shield and replace your packing with GFO Gore to eliminate dripping.
Good ideas. Thank you. We just read about the Gore packing! Interesting. We just changed our packaging but we will consider this for when it needs to be replaced 👍
Yeah saves us so much money just figuring things out ourselves $$$. Lots of googling and RUclips videos help. Glad that Derek has the courage to just take things apart and figure it out.
Great job Derek, you worked that out well, and Jennifer you have a dirty laugh. So I guess that was the wing engine, used mainly for the hydraulics? (Summer is coming). Xxx
Hi , we have no hydraulics on our boat. The wing engine is used for propulsion. We use it for trolling for salmon. And as an auxiliary engine to get home if the main Luggar fails 👍. 🤣🤣😂. My dirty little chuckles. Hahah. I try to behave while filming lol 😂
Yes I do have crow foot wrenches in my tool arsenal. I did try them to adjust the stuffing box in the past but they were too cumbersome with having to use a ratchet and all. The home made wrench works better for me in this application. 🛠️🔧🔧😀
Mr Derek may i suggest a cordless 1/2 inch impact gun none of my business not meaning to interrupt your enjoyable manual experience, I know work harder not smarter, mind you i am shocked! Offended ! ( not really ) the facial expressions that contribute to the overall viewing experience. oh the commentary on the "Lube the Shaft' with the background giggle .umm add "stuffing box" you know back to the facial expressions ummm I leave it there Keep it up.... no pun intended ROFL Oh see you at he club meeting tomorrow MR Director XD
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Love your videos. My dream is to enjoy the Pacific Northwest in a trawler, so peace full& beautifully.
It is beautiful up North here! Just so peaceful Maybe oneday you will come up here
Nice job, saved a couple gold pieces on that job.👍🏼
For sure! I’m sure it would have been expensive to pay someone 🛠️🛠️🛠️🛠️🔧🔧
Happy Sunday You Guys! Thanks so much for being that great example of teamwork! My wife and I so appreciate your videos! Thanks so much!
Thank you for watching our videos! Makes us smile! It’s funny but I enjoy going down into the engine room and learning and watching Derek’s ideas 👩🔧. Jen
Great job on the wing engine repair!!
Thank you. All done now. No more oil leak!
Derek, your level of talent truly amazes me! Well done!
Amazing how he just figures things out! Mechanical mind 🐕🦺⚓️🐕🦺🐕🦺
Way to go man!! Repairs on the go!! Cheers
Thanks!! Everything seems good so far! 👍👍👍
Awesome video guys, thanks
Thank you!! ☺️
Great video you guys. That was a big job. That’s a part of boat life we normally don’t get to see.
Thanks for watching us! Yes it was a big job lol. We made sure to edit out the swear words haha 😂
Nice work. Thanks for sharing. Wish manufacturers would just supply a set of any specialty tools needed, esoecially if for a fairly routine service like adjusting the stuffing box. Not likely one would be able to adjust the stuffing boxes at sea without your shortened wrench.
Yeah it would have been difficult that’s for sure. So important to have the right tools with us when we cruise around. Nothing worse than not having what you need. 😊
Love the intro!!!!😂 special custom-made wrenches, and the boss man needs a larger swing press.
Hahah he does need a large swing press! I’m just glad it wasn’t me swinging that! 👩🔧. Jen
@@MVSKOOKUM1 haha
You need a Skookum Stealth channel that my wife doesn’t know about for these maintenance vids. They make convincing her to buy an N40 harder!
Hahahah!! A little side Channel for Nordhavn dreamers with the maintenance side of it lol. Good idea hahah. Boats are maintenance but it’s all worth it!!!
More good work by the main man, well done mate. Where would we be without lube..... better not say anymore.
🤣😂🤣🤣🤣😂. That lube sure comes in handy!
good job, well done Derrek
Thank you! No more leaks!! Phew!
The corrosion may be coming from water slinging off your shaft seal. Cut up a plastic bottle for a shield and replace your packing with GFO Gore to eliminate dripping.
Good ideas. Thank you. We just read about the Gore packing! Interesting. We just changed our packaging but we will consider this for when it needs to be replaced 👍
Well done Derek. Imagine the $$$ that would have cost you if you weren’t such a handy man.
Yeah saves us so much money just figuring things out ourselves $$$. Lots of googling and RUclips videos help. Glad that Derek has the courage to just take things apart and figure it out.
Great job Derek, you worked that out well, and Jennifer you have a dirty laugh. So I guess that was the wing engine, used mainly for the hydraulics? (Summer is coming). Xxx
Hi , we have no hydraulics on our boat. The wing engine is used for propulsion. We use it for trolling for salmon. And as an auxiliary engine to get home if the main Luggar fails 👍. 🤣🤣😂. My dirty little chuckles. Hahah. I try to behave while filming lol 😂
Morning there is some tools called crows feet they come in 3/8 or 1/2 inch or metric too they work the same as your home made tool
Yes I do have crow foot wrenches in my tool arsenal. I did try them to adjust the stuffing box in the past but they were too cumbersome with having to use a ratchet and all. The home made wrench works better for me in this application. 🛠️🔧🔧😀
Do you think that not using the Yanmar very much contributed to the corrosion and leak?
Possibly but the seal was about 20 years old. We try to use it for trolling for fish every summer
👍🧿
😁🐕🦺🐕🦺⚓️⚓️⚓️⚓️
Mr Derek may i suggest a cordless 1/2 inch impact gun none of my business not meaning to interrupt your enjoyable manual experience, I know work harder not smarter, mind you i am shocked! Offended ! ( not really ) the facial expressions that contribute to the overall viewing experience. oh the commentary on the "Lube the Shaft' with the background giggle .umm add "stuffing box" you know back to the facial expressions ummm I leave it there Keep it up.... no pun intended ROFL Oh see you at he club meeting tomorrow MR Director XD
🤣🤣 😆😂😂😅
😂dirty talk
Hahahah. Dirty engine whispers 🤣😂😂