Configuring the Motoscope Pro - Revival Cycles Tech Talk
HTML-код
- Опубликовано: 8 июн 2016
- Please visit our technical articles for detailed wiring diagrams, troubleshooting guides, and instructions for installing your Motogadget accessories like the Motoscope Pro!
technicalarticles.revivalcycl...
The Motogadget Motoscope Pro is capable of showing stats like engine hours, low gas, speed, tach readouts and a whole lot more. This Tech Talk will make sure you know how to configure those settings so you can subtract 10 when the officer asks, "Do you know how fast your were going?"
This helped me out alot. Thanks heaps dude.
Quick Tip: You enter the Setup Screen ONLY by having "Speed" displayed and then a level 4 press. If any other parameter than speed is displayed the level 4 push won't let you excess the Setup up screen 😉
Love this channel… so comprehensive, mgadget, is awesome, I enjoy watching these videos, sometimes I wish I had time to make videos , but just too busy working on bikes. Keep up the great work….
Brilliant, thanks for making this gents. Steve, Kustom Kommune.
Very helpful explanation!
Awesome. Very nicely explained.
The ADD comment made me laugh! Keep up the great teaching!
Great video ! Cheers
Hey thanks for the video, it really helped me a lot while installing this on my 79 BMW R80/7 project. However, in order to get to the setup menu, it is worthy to mention that you do need to turn it down, switch back on and do the 4 sec push, but this will only work if the lower display line ( biggest characters ) is set to Speed. If this is not the case ( for example it is set to Rpm or anything else ), you will not be able to get into the setup menu. Don't ask how i found this out, i had to learn it the hard way!
Thanks for this video I have this unit on my new bike and have no idea how too use it hopefully after this I can figure it out but it’s on the moto mini
Hi Stefan, the scope is ::::: HIGH- SPEED- FAKED.......... KBA does not matter......... LOVE YOU. 🤩🤩🤩🤩🤩
"two hours, eleven minutes, and sixty six seconds ago" that gave me a good laugh.
Where are the two magnets supplied, is there a way to install them?
I bought the gauge from you guys. Good thing I rewatched this video cause the manual doesn't say to cycle off and on the ignition first then do the level 4 push to enter setup. For the life of me I couldn't enter it.
Wooooww super review. Do you know if we can change the motogadget text for anyother qhen we strat the bike?❤
hi Guys wow awesome video just a question how the hell ahahaha doe connect the breakout box a to this motoscope pro ? to make the indicator light works I'm loosing my. mind with motogadget manual ,do I use the orange wire only ?
Thank you very much, can you do full detail on the R ninet one as well, Thank you.
Nice video! Any tutorial on wiring it to a Buell XB?? I'm a little bit lost with this one :(
Great video. I am currently building a custom 82 Suzuki GSX1100 and the only thing i didnt gather from the video is the gear indicator setup/wiring? My bike has s big connector for the gear position indicator and i could nor for the life of me figure out how to wire it in this instrument panel from your video. Can you please explain it for me?
Very nice!! This Motoscope Pro can be installed on Suzuki Boulevard M50 2011 ??