How to Fix DJI Mini 3 Pro GIMBAL STUCK Error 40002
HTML-код
- Опубликовано: 6 окт 2024
- How to Fix Gimbal Stuck on DJI Mini 3 Pro with the Error 40002. It easy to fix the error 40002 of Dji Mini 3 Pro. You have to Teardown your Mini 3 Pro Gimbal Stuck. You also can apply this fix of error 40002 Stuck Gimbal with other Model of DJI drone.
Cheap Aliexpress Link:
Mini 3/ Pro PTZ CableTester : s.click.aliexp...
Mini 3/ Pro Full Set Gimbal : s.click.aliexp...
Mini 3/ Pro Gimbal Roll Arm Lower : s.click.aliexp...
Mini 3/ Pro Gimbal Cable : s.click.aliexp...
Mini 3/ Pro Wing Protector 35G: s.click.aliexp...
Mini 3/ Pro Wing Protector 25G : s.click.aliexp...
Mini 3/ Pro Landing Gear : s.click.aliexp...
Mini 3/ Pro Sticker : s.click.aliexp...
Feel Free to Contact Us for more Information about Remotely Fix 40011 and 40021
Telegram : t.me/djisolutions
Whatsapp : +85589898982
![Fix DJI Mini 3 GIMBAL STUCK Error 40002 [ Cable Problem ]](http://i.ytimg.com/vi/fiebNX5f1r8/mqdefault.jpg)
Hello friend, fantastic your tips, following them there is no mistake. I did the procedure as explained in your videos, it worked perfectly, I am forever grateful to you and your content. As for users who are in doubt about the tips, I recommend everyone to do it in the explained way so that there will be no errors. Once again, thank you very much and you already have a new subscriber on the channel attentive to your tips.
Thank you for your lovely comments, sometime I really want to explain to everyone but my English and my voice is so bad 😂, I promise I used to try it but it not going well. One a again, thank you for your support ❤️
Well done bro. There’s people like you that make things a hell of a lot easier!
Thank you so much for your lovely comment ♥️
Love your last statement..."if this doesn't work throw the drone away" 😂. This thing cost me almost 2k $nz!! I'm not willing to toss it in the trash 😮
Dji,howdy?-y.o how breathtaking done! 😯
awesome video, thanks so much for posting. I dont have any error messages, however, 1/3 of my video from my mini 3 pro has small jitters and shakes. Do you think it just needs some WD-40....?
It should not shake, you should try everything
What cleaning solution did you use to spray into the motor?
WD 40
Is this same process with Mini 4 Pro? I send it to non licensed technician, changed my rubber dampers and pitch motor on left side, worked well after repair, but when I tried to fly it long term, at first it was smooth, after long minutes of flying it will give me the gimble stuck error, and I cant the turn the drone anymore, should I clean it the same as you do?
You should clear first then if it the same error. Replace the gimbal
What's that flat metal tool called you use to pry open base
Spudger
What do you call the two rubber bushing in both sides..? Mine is torn
Rubber Dampers
Hello, first of all thank you for your video, I would love to try, just one question before I tear the drone.
1. After a light crash, when I turn on my drone , its wings can set in position with a normal movement, and the gimbal position it with a slight movement too, but it shows on the screen that « gimbal stuck 40002》 , and I can’t control the gimbal with my remote anymore. does that represent the cable and motor are fine and maybe I just need to put some oil like you do?
2. You mention a software to detect the problems of drones, what’s the name of it?
Thank you in advance, and have a great day!
I have the exact same issue, everything seems to rotate freely, just unable to have any control over the camera when flying
I have dji mini 3 pro drone. currently having an issue with gimbal stuck error code that showing 1D010002
I have checked gimbal rotating freely in all angles
Gimbal stuck error can me gimbal cable or gimbal motor. If it moving correctly so it should be cable
What is the name of that cleaning spray
You can use WD-40
Hello friend, how to know which engine is the problem, or if it's just the flex cable?
Good question, mostly I meet is flexible cable problem because sometimes we can't look by our eyes if the cable is good. It sometimes look good but it broken. To check if which motor is the problem, it abit difficult. If it have some movement the gimbal, we can abit know but if it won't, we need software to check it. But like I say when we check it via software, sometime it flexible cable that case the problem.
@@djiSolutions You are very good at what you do and help other people to solve the problem, thanks for your content, I still can't solve my problem, but I'll keep trying, with your help, I'm sure I'll get it, waiting for the flex cable to arrive and side rubbers. Thank you again.
I had a white stretchy ring fall out of the drone from somewhere and have NO idea where it goes haha.
Send photo to me o telegram
I did this that but the Jimbo is pointing to the left I calibrate but it doesn't get straight I don't know what to do
Telegram or WhatsApp us
how to test if roll/pitch motor is working correctly and is not faulty I am getting 1D010002 error, gimbal stuck. Any help.
It very difficult, for me I have software to testing it but it very expensive. For you I think you should buy cable test tool first (check my video for that test tools). Make sure it not the cable problem because most of the time is cable.
The screw at 2:28 is stuck for me !
I have no idea how to remove it without breaking it ?
To lubricate can I use wd40? Is the same that you use?
Much use WD-40
It work 😂 unbelievable, thanks
Sometime it work for sure if your gimbal not broken.
Hi, can you help me? I had crash landed and broken roller arm and gimbal stuck. After watching your video i changed the roller arm and ptz cable ( r6 roller m no signal)
Now i get gimbal overloaded when flying, sound coming from gimbal and when i press the button to turn down 90 degree, it would turn down but it will not center and theres sound coming from gimbal. Thank you
Check with motor that make the sound and replace it.
@@djiSolutions any idea how to change the roll motor..? Its very hard to remove..
Hi. Device activation prohibite (1112). Can be solved with the program drone hacks? or how I could solve the problem? DJI guys can't help me because I don't have the receipt anymore, even though I showed them my bank statement Thanks
@@sentosa_K wait for next video, don't forget to subscribe. So don't miss it
@@emilianiugan7831 sorry I don't have experience on error 1112
Help! My Air 3 shows Gimbal stuck (code: 1D010002). I tried replacing the flex cable but still the same error. Please help
So it is gimbal problem
What about DJI Mavic air 2 s...? Will it be same
Yes you should clear the dust and if it work. But the gimbal is different. Look this video, you will know how to teardown the gimbal.
ruclips.net/video/f806br2dKrU/видео.html
every so often after replacing the gimbal roll arm I get a gimbal stuck message after the gimbal tries to calibrate itself by rotating the gimbal down then up for at least 5 times. I reboot the drone and it goes away. any ideas as to why it's doing that? When it does work I have full motion.
Yes, if the gimbal is working properly, the stuck gimbal error will gone automatically, no need to Calibrate.
How do you know if a motor is working?, I crashed my drone and it started to give me the error, I followed your video but I still get the problem, I just want to rule out that it is something else, the camera works.
There are 2 ways to check if the gimbal motor work. 1: when trun on the drone look at the motor. If it have movement or not. 2: using software to check. Note: most of the time is gimbal cable. If it broken, it also have stuck gimbal too.
I crash my mini 3, gimbal is fine optically, but doesnt work. I reconect all conectors but just make a little move in begining and after nothing. What do you think, what can be the problem? Need buy some part or just recalibrate or make something else?
Mini 3 and 3 pro flexible cable is very bad, it very easy to break down. I recommend you change that cable first.
@@djiSolutions Even i cant see mechanical damage? Cable is fine gimbal rotate well withoute any problem. Have y tip where i can buy this cable? i saw in chinese websites buti dont know the quality is how good
@@pgchem it so difficult to tell if the cable is broken, but it is the cheapest part to change first. DJI is from China, you can buy it on AliExpress.
@@djiSolutions Thank you i try it and let you know. After replaceing the cable what happend, but before i try it re calibrate on computer.
Hi. Device activation prohibite (1112). Can be solved with the program drone hacks? or how I could solve the problem? DJI guys can't help me because I don't have the receipt anymore, even though I showed them my bank statement Thanks
you cant solve ıt sorry. it is referred to fly away drone. you can sell it as parts or just buy new mainboard.
Help! I have gimbal stuck error Error Codde 1D010002 how to fix please???
Gimbal stuck is hardware problem, check cable and gimbal
@@djiSolutions the cardan moves freely and I will replace the cable
My Mini 3 Pro started showing this same code for no reason, I didn't crash the drone, the drone always worked normally, just a day the drone decided the gimbal didn't work anymore. It makes small movements during startup, but then stops and no longer responds. The camera continues to work normally, the axes move freely and there is no debris or moisture blocking the gimbal, rc can't recalibrate the gimbal in automatic, it fails immediately, and in manual the gimbal doesn't even move, and re-centering doesn't move either 🤌🤷♂️
@@domusbr did you fix your problem?
@@markkyrylenko511 I'm not sure if I can say I fixed it. I contacted DJI and realised my refresh care was still active. so they gave me a new one, they said the gimbal of the old drone was faulty.
can u do a gimbal reset code or software fix 40012
I can for mini 3 pro
What about code 60010 ??
When you meet this problem, it means the remote control needs to be calibrated. Please turn off the drone power and calibrate the remote control with fly app.
@@djiSolutions thanks 🤍
Dji pro 3 setting gymbol stuck
My drone only two weeks old. Stuck already. DJI mini 3
Congratulations 🥳🥳🥳
Mine on the first flight, the second i touched quickshots
@@OzSkitzo that cool, take to DJI service center
Unbelievable
Same condition mera dji mini 2 Drone mein hai Mera aap ka number milega yeh apka address