Una restauración en verdad SOBERBIA!! de Fantasía 😃. Tengo una pieza similar y haré el proceso lo más apegado a lo que nos compartes amablemente aquí. Saludos desde México!!!
@@jorgefsanchezmarin All the best on your project Jorge. I hope yours is in better condition than mine. Thanks very much for watching and leaving a comment. Please consider Subscribing if you haven't already 👍 Greetings from Australia 🦘
You did a great job cleaning up the wrench but I believe the most amazing thing about this video is watching you vacuum a cat without it tearing your hand off. Keep up the good work. Cheers!
Thanks for watching and leaving a comment. Much appreciated. I don't know why but the cat seems to love being vacuumed. He is a very strange. Check out my other video, the cat appears at the end. ruclips.net/video/c8tTjNByzOs/видео.html
Bahco is the only brand of adjustable wrench I'll buy, I love their 8" series with the speed wrench on the handle and wide opening jaws, they open as far as the average 10" adjustable wrench. Good to see you got this old beauty looking good again, all old tools like these should be cherished because we won't see tools of that quality too much in the future.
Thanks Mark for watching and leaving such a nice comment. I have a old 8" I need to restore at some point. They certainly are a good brand. If you haven't already please subscribe and check out some of my other videos.
Thanks Daryl, your comment is very much appreciated. If you haven't already please consider Subscribing and check out some of my other videos. ruclips.net/video/VEPrTxwpalg/видео.html
Thanks James. Just make sure it is a brass brush and not a brass plated brush. I found some of those brass wire wheel type brushes don't work. All the best, let me know how you get on.
What a level of finish you have .... I would have tried to match the inside too . Outstanding finish with the primer putty and brass paint . Way better than new , nice show piece !
Thanks Jim, this was my first video. Lots of sanding. I had high hopes for matching the inside but I the brass paint turned out better I think. Thanks for watching and for the kind comments.
Thanks for watching and leaving such a kind comment Seventynine Party, that's very much appreciated. If you haven't already please consider Subscribing for more 👍😁 Check out some of my other projects when you have time.
Another awesome restoration mate, that came up beautiful, they're worth a fortune new. And a great solution to a malting long haired cat, will have to try that trick!
Very nice resurfacing. But since it will rust again, maybe you should have either sprayed a clear coat over it OR nickel coated it using an electrolysis process. But very nice project all the same... Thumbs Up!
Thanks for your comments and the like Gary. I did later cover it in some wax but point taken a nickel plating would have finished it off nicely. I did some nickel plating in my second video. Thanks for watching, much appreciated.
Hehehh your very first video is also stunning!!!😍😍 Since the first time you are amazing, if I were an old wrench I wouldn't pick anyone else to take care of me, I bet she just felt in love with you 😋😋😋 By the way, you could have achieved that texture just by sandblasting that little area again, maybe with a thicker grit sand!!! 😊😊
I spent so so much time on this that is quite possible lol 🤪 way too much hand sanding involved in this project. I actually did try blasting that area again and tried out some other methods before I gave up. This one is now sitting on my workshop wall as a reminder of my first project. Thanks again for your encouragement and enthusiastic comment 👍👍👍👍👍
I think it's only you. Did you enjoy the video ? The only joke I know is a dad joke. Did you hear about the surgeon who accidentally swapped his tools with the hospital handyman’s? His last surgery was gut wrenching.
Wow! Astonishing results. Congratulations. By the way what sort of grease have you used there, silicon? if yes what brand/ specs and why silicon-based and not white lithium since there is not rubber or plastic involved? Thanks
Thanks for watching M3a9m, much appreciated. Good question. It's actually called inox, it's a food grade grease and can be used on just about any metal surface or bearings.
Thanks for watching Bernard. For me it's always a fine line between leaving all the love marks or not. This was my first project and as you could probably tell, I'm no welder. Appreciate your comments.
![GUILTY GEAR -STRIVE- Season Pass 4 Playable Character #1 [Queen Dizzy] Trailer](http://i.ytimg.com/vi/nXDsAgYXXv4/mqdefault.jpg)
Hi folks
This is my first Restoration project.
Please Subscribe and Leave a comment
Cheers
Very professional, I learned some things oh and the plating is cool!
@@doinsngoins Thanks again Steve 👍
Una restauración en verdad SOBERBIA!! de Fantasía 😃. Tengo una pieza similar y haré el proceso lo más apegado a lo que nos compartes amablemente aquí. Saludos desde México!!!
@@jorgefsanchezmarin All the best on your project Jorge. I hope yours is in better condition than mine. Thanks very much for watching and leaving a comment.
Please consider Subscribing if you haven't already 👍 Greetings from Australia 🦘
You did a great job cleaning up the wrench but I believe the most amazing thing about this video is watching you vacuum a cat without it tearing your hand off. Keep up the good work. Cheers!
Thanks for watching and leaving a comment. Much appreciated. I don't know why but the cat seems to love being vacuumed. He is a very strange. Check out my other video, the cat appears at the end.
ruclips.net/video/c8tTjNByzOs/видео.html
Bahco is the only brand of adjustable wrench I'll buy, I love their 8" series with the speed wrench on the handle and wide opening jaws, they open as far as the average 10" adjustable wrench. Good to see you got this old beauty looking good again, all old tools like these should be cherished because we won't see tools of that quality too much in the future.
Thanks Mark for watching and leaving such a nice comment. I have a old 8" I need to restore at some point. They certainly are a good brand. If you haven't already please subscribe and check out some of my other videos.
Perfect restoration! Thanks for sharing.
Thank you Sergey, your comments are very much appreciated. Please check out some of my other projects when you get a chance👍
Looks awesome!
Thanks Daryl, your comment is very much appreciated.
If you haven't already please consider Subscribing and check out some of my other videos.
ruclips.net/video/VEPrTxwpalg/видео.html
Man that was a Giant of a tool - no wonder it took a while - great job!
Thank you very much. Yes it was like a never ending story. I was so relieved once I had finished it. Thanks for your comment, much appreciated.
@@Austeration ha ha yes that must feel like forever - but the outcome was great!
@@DANYMITERESTORATION Thank you. Your comments are very kind and rewarding.
The attention to detail and pace of the video are excellent. Well done!
Thank you Mr Magic for the complement.
I am so glad you liked it.
this is awesome restoration dear,
I don't know how I haven't watched this video for four months.
Thanks for finally getting around to watch it. Very much appreciated. Have you missed any of my other projects.
@@Austeration
no more messing dear 😅
That brass brush and heat thing, that was really different. Im gonna try that. Great job.
Thanks James. Just make sure it is a brass brush and not a brass plated brush. I found some of those brass wire wheel type brushes don't work. All the best, let me know how you get on.
What a level of finish you have .... I would have tried to match the inside too . Outstanding finish with the primer putty and brass paint . Way better than new , nice show piece !
Thanks Jim, this was my first video. Lots of sanding. I had high hopes for matching the inside but I the brass paint turned out better I think. Thanks for watching and for the kind comments.
@@Austeration I agree , turned out brilliant , I've used paint to cover up grinds after initial removes bit never to this standard
@@toolrestoration You are too kind buddy 😁
Amazing. Simply amazing. So much work. So beautifully done.
Thanks again Ben. That one was a monster, took months to finish. I almost gave up after my first project. Where are you from ?
@@Austeration I live in South Texas, right near the Mexico border.
Nice Restoration video 👍
Thanks very much for watching and leaving a comment. If you haven't already please consider Subscribing or check out some of my other videos.
That was a heroic decision, to sand that monster by hand! I'm very impressed by every aspect of that restoration! Thank you for sharing, all the best
Thanks Nick. Appreciate your comments.
It was a monster and took forever to sand. Glad you enjoyed it.
Wow great restoration I like it
Thanks for watching, much appreciated.
I'm glad you liked it. Please check out some of my other projects and consider Subscribing 👍
Good restoration of a useful tool.
Thanks very much. Glad you enjoyed it.
That is one of the best restorations I’ve seen, thanks for providing me with some good ideas.
Thanks for watching and leaving such a kind comment Seventynine Party, that's very much appreciated.
If you haven't already please consider Subscribing for more 👍😁
Check out some of my other projects when you have time.
The product shines very well. I even want to have it. good job
Thanks very much. It's a nice piece to have but I'm not sure if I will much use for it.
O kadar güzel olduki, bu sefer bu anahtarı kullanmaya kıymaz insan😋
👍🏼 Tebrikler
Thanks for watching. Glad you enjoyed it.
Very nice job, man. Warm regards from Mexico.
Thank you very much Ruben, much appreciated. Greetings from Australia.
Be sure to check out some of my other videos if you haven't already.
Greetings buddy, great restoration and beautiful result 👍
Thank you for your support. Glad you enjoyed it.
@@Austeration you are welcome
Very impressive work! . Best wishes
Hey thanks very much for the visit.
Hope you enjoyed.
Oh my God, that cat with the vacuum. Now that's good content!
Thanks for watching and leaving a comment. Glad you liked the cat part. Check out my Bevel square video, he appears again. Very strange cat.
I was distracted by the size of this wrench which made me smile throughout the video. Very meticulous, good work. (great beautiful cat)
It certainly is a monster. Thanks for the comment glad you enjoyed it.
Very nice job my friend! Keep working!
Thank you very much for your support.
Top Job
Thank you so much for watching and leaving a comment Bernd, very much appreciated.
awesome job! ✨👏🏼👏🏼👏🏼👏🏼👏🏼
Thanks very much, glad you enjoyed it.
Thank you also for Subscribing. Hope you check out my other video's.
Awesome job! That was a pretty large project, came out great though 👌
Thanks for the comment, glad you enjoyed it.
Awesome job 👌💯👍👍👍
Hey thanks very much 😀
Another awesome restoration mate, that came up beautiful, they're worth a fortune new.
And a great solution to a malting long haired cat, will have to try that trick!
Thanks for that, much appreciated. Yes it works at treat as long as your cat doesn't run away from all the noise. Let me know how you get on.
Well done all around. You are a pleasure to watch, Thank you, Ed
Thanks very much 👍 so glad you enjoyed it 😁
Beautiful finish. Subscribed to see more!
Thanks very much 👍 glad you enjoyed.
Great quality tool well done.
Thank you I appreciate that.
My first of hopefully many.
Great work, of course liked and subscribed
Thanks for the support Rob much appreciated. Glad you liked it.
❤
Thanks again. Much appreciated
Stunning
Thanks, very much appreciated and thanks for watching.
Muito bom, gostei muito 👏👏👏
Por ser seu primeiro projeto, vá aumentando o grau de complexidade com calma.
Saudações do Brasil.
Hello from Australia. 👋
Thanks very much for watching, glad you enjoyed it. Please subscribe and check out my other video's. 👍
Very nice restoration. Great attention to detail. Nice work brother
This was my very first video. I hope the quality of my videos has improved since doing this one. Thank you for the compliment
It turned out great. Bahco tools are very hard to find here in the US but they do appear from time to time.
@@ivanstiles7030 I would have thought everyone would there would have one 😅
No sir. They getting more common with the internet but i don't see them very often where i live.
Hi buddy. I loved this restoration, you did a good job. 👏👏👏👍👍👍
Thank you kind sir, very much appreciated.
Very impressive work! Precision, accuracy, much is done by hand. I respect such projects! Subscribe
Thank you for your kind comments and your support. Very much appreciated
I did!! and certanly am not regretting it
great job.
down dor a colab sometiem?
That's good to hear, glad you enjoyed it.
Colab at some point sound like a plan 👍 I'm in Australia though.
Nice to see you started off small .....
Yes I thought this one would grab some attention as couldn't find another one the same on here.
That is a massive wrench 😱
Lol your right it's huge. Please check out some of my other projects if you have time.
ruclips.net/video/j7oK7tRsano/видео.html
very well
Thanks for watching, I hope you enjoyed it.
Now that’s a wrench
Thanks Hairy Mole, very much appreciated.
If you haven't already please consider Subscribing and check out some of my other projects 👍
Very nice resurfacing. But since it will rust again, maybe you should have either sprayed a clear coat over it OR nickel coated it using an electrolysis process. But very nice project all the same... Thumbs Up!
Thanks for your comments and the like Gary. I did later cover it in some wax but point taken a nickel plating would have finished it off nicely. I did some nickel plating in my second video. Thanks for watching, much appreciated.
Hehehh your very first video is also stunning!!!😍😍 Since the first time you are amazing, if I were an old wrench I wouldn't pick anyone else to take care of me, I bet she just felt in love with you 😋😋😋 By the way, you could have achieved that texture just by sandblasting that little area again, maybe with a thicker grit sand!!! 😊😊
I spent so so much time on this that is quite possible lol 🤪 way too much hand sanding involved in this project. I actually did try blasting that area again and tried out some other methods before I gave up. This one is now sitting on my workshop wall as a reminder of my first project. Thanks again for your encouragement and enthusiastic comment 👍👍👍👍👍
Hey bro. Nice restoration. Do you know the manufacturer zubi-ondo? I restored a pipe wrench, is it vintage?
Thanks, very much appreciated. Can't say I have heard of that brand sorry. I checked your channel out though. Looks great.
Thank you. Keep up the good job
@@ticoworkshop634 Your welcome. You keep up the great work also.
@austeration you too bro. Thank you
Am i the only one desperately trying to remember a 'giant tool' joke?
I think it's only you. Did you enjoy the video ?
The only joke I know is a dad joke.
Did you hear about the surgeon who accidentally swapped his tools with the hospital handyman’s?
His last surgery was gut wrenching.
Wow! Astonishing results. Congratulations. By the way what sort of grease have you used there, silicon? if yes what brand/ specs and why silicon-based and not white lithium since there is not rubber or plastic involved? Thanks
Thanks for watching M3a9m, much appreciated. Good question.
It's actually called inox, it's a food grade grease and can be used on just about any metal surface or bearings.
If you need more information please let me know.
Wow, I'm humbled.... what's the cats name !!
Thanks once again Steve.
The cats name is Meow.
He is very clever because he can say his own name.
👍👍👍💪
Thanks Ali please check out my latest project ruclips.net/video/W5dWY1hQB7g/видео.html
it should not have been welded ! this process softens the steel.
Thanks very much for watching and leaving a comment Michael much appreciated.
The purpose of this video is to make a video.
What do you mean ?
I don't like the welding...you lose the character of the tool by doing this. If you want a Snap On wrench go get one
Thanks for watching Bernard. For me it's always a fine line between leaving all the love marks or not. This was my first project and as you could probably tell, I'm no welder. Appreciate your comments.
Impressive!
Thanks for watching and leaving a comment. Glad you enjoyed it.