Mercedes Sprinter Motorhome Conversion - 10 Minute Timelapse (DIY)

Here is a video of my Mercedes Sprinter van which we converted into a motorhome for motocross.
We obviously made some small mistakes here and there, but for a first time conversion, I think it went alright. I hope this mabye inspired you to do your own build.
- Sorry I lost footage of the last part where we installed the kitchen and overhead cabinets, but anyway here it is.
Thanks for watching :-)

[@BWT599]

From one Brapp van fam to another 🇨🇦 😊

[@xxlalbatross3287]

I am a new follower(nr:76) of your channel Greetings from Türkiye 😊

[@TeamSimpsonRacing]

Simply lovely 😍

[@simondoolewerdt2680]

Thanks 🙌🏽😀

[@tooquinn3600]

any pictures with bikes in it?

[@simondoolewerdt2680]

prnt.sc/LSC63M5KUXrH Here you go :)

[@jurgenpluxy9828]

That black rubber around the windows inside, wicht size is it? Thanks

[@BikermagRo]

Hi, Could you please tell me at what height from the floor did you install the bed frame, and what clearence do you still have from the bed platform to the roof
? Thank you!

[@FranciscodeAssis-ni3pf]

Ficou muito linda, Desculpa vou ter que copiar vc 😅😅😅

[@jakeevans4115]

Is there any way of me getting more specifics without it being too much stress? Maybe the full un edited video and some measurements/ materials for the bike area please? 🙏🏾

[@LifeWellRidden]

Love the build! I have been thinking of the same thing, did you opt for just the 170 or did you go 170 ext? Would love to see some shots of the bikes in there. Thank you!

[@simondoolewerdt2680]

If it is regarding the length it is a Long model sprinter van. This model comes in 4 lengths. Short, Medium, Long and Extra long. So this is the Long model, which has the long wheelbase, but not the extended version. Height is also the high model, but not the extra high with the funny "top" on it. (It has to be a long and high model as minimum to do what I did here, everything is measured down to the last mm).
Sure here you go: prnt.sc/LSC63M5KUXrH

[@LifeWellRidden]

@@simondoolewerdt2680 you are the best thank you!!

[@oranokelly4966]

Which model sprinter is this? Awesome
Build

[@Mraxell]

Sprinter 170 model ..

[@simondoolewerdt2680]

Thanks. It is a sprinter 316 2010 long model :)

[@strifex-suspension-works]

Great build!
What is that white panel material you used to finish of the motorcycle space?

[@simondoolewerdt2680]

Thanks it’s a sort of plywood with a brown blank surface. And then all the screws where spartled and sanded down. To finish off it was wrapped in high gloss kitchen foil😊

[@strifex-suspension-works]

Can you provide a link to that kitchen foil so I can understnad what type is it? Thanks

[@joshkhan3673]

Lovely looking build. Can i ask what paneling you used for the garage area? Thanks

[@simondoolewerdt2680]

Plywood with a brown blank surface. Wrapped in high gloss kitchen foil afterwards 😊

[@edgeofthegalaxy2649]

Do you do conversions now ? For others ?

[@andriuszdanevicius5520]

Wow 👍

[@oliverebsen5112]

Total i orden det der

[@danielshepherd4330]

Hiya, what did you use to make the bed frame ? Thanks

[@simondoolewerdt2680]

Hi, sorry for late response. Bed frame is made out of aluminium T-proflies that is bolted into the chassis with submerged bolts. After that all the ends are welded together. The bottom of the bed is made with 22mm plywood, bolted onto the aluminium frame :-)

[@turkeyphant]

How much did you spend on it in total?

[@simondoolewerdt2680]

Around 18.000 USD for the interior part.
Did a lot of work with the exterior aswell, fresh paint, wrapping etc which is not included in the above price :)

[@tobiasnielsen5777]

First like

[@carlosguerrero6346]

👍🏠✌️