Manfrotto MVH502AH Fluid Head (Grease Replacement) DIY!
HTML-код
- Опубликовано: 6 сен 2024
- Manfrotto MVH502AH Fluid Head Grease Replacement
How to disassemble and replace the grease of a Manfrotto MVH502AH tripod fluid head.
I do not know what type of fluid it carries, but this works:
Multi grasa de silicona OKS 1110 lebensmittelecht
www.amazon.es/...
It is also known to work well: Dow Corning high vacuum grease, although I have not tried it yet
Reemplazar la grasa de una cabeza fluida Manfrotto MVH502AH
Como desmontar y reemplazar la grasa de una cabeza fluida de tripode Manfrotto MVH502AH .
Desconozco que tipo de fluido lleva, pero esta funciona :
Multi grasa de silicona OKS 1110 lebensmittelecht
www.amazon.es/...
Tambien es sabido que funciona bien: Dow Corning high vacuum grease, aunque yo aun no lo he probado.
© Javier Rullan Ruano All rights reserved 2020
Visit my blog:
www.javrullan.e...
www.javrullan.e...
I thoroughly enjoyed this and hope I never have to do it myself.
Thanks!
I was looking for a grease for my video head. Thanks a lot for the suggestions!
Thanks!
Es la alternativa para Europa a la nyogel 767A. Acabo de probar la oks 1110 y funciona perfecta. Antes lo había hecho con grasas ptfe y silicona y mal. De milagro tenía un tubito de oks 1110 ya en casa... pero hasta ver este vídeo no quise probar y posiblemente desperdiciarlo. Va perfecto
Apparently this is the way to go when buying grease : Nyogel 774VH
Fantastico, raro encontrar material sobre este tema (en mi opinion el fabricante podria tomarse la molestia de realizar algunos videos al respecto). Muy educativo y una prueba empirica de que esta cabeza realmente es fluida pese a estar en el rango de precio donde se podria poner en duda.
Gracias!
Thankyou!
You are welcome!
Thank you for posting this. Shot pretty well!
However, if you or anyone else can help….I have attempted this with (3) same heads and CANNOT remove that disc@ 2:29 by hand or by using a screwdriver thru the underside while improvise other ways to apply addtl leverage (and yes I removed the “set screw” first)
It almost seems as if threadlocker(loctite) was applied to the thread, when assembled.
Yours unscrewed so easily!
Did you get the disc loose? Have the same problem on mine.
Hello! DowCorning can only be used if you use 502AH at> = + 5 ° C, if you use at
Indeed, when using the fluid head, you must bear in mind the operating temperature to choose the degree of viscosity...
La grasa de litio sirve si no se consigue el producto señalado.
정말 고마워요.
You are welcome!
Thank you! this is just what I needed to know.
Thanks ❤️ need a tripod head like this
Glad to help
@@JavierRullanRuano yes thanks I order the MVH502AH already
for horizontal move 😉 my old sirui head have only vertical fluid.
Muy bien explicado,a lo mejor me atrevo con mi cabeza fluida,saludos!
Gracias!
Menudo curre te has pegado amigo, parece que queda perfecto!
Gracias!
Muy buen vídeo. ¿Considerarías que es un cabezal de alta calidad? A mí me ha sorprendido ver tantas piezas de plástico.
Gracias, es un cabezal de tipo medio, yo lo uso habitualmente, no esta mal dado su precio.
Javier,
You made it look so easy :)
I will need a lot of courage to do that. Haha.
It,s easy, haha
This video is very helped - many thanks!
thank you for this video 👍
Thanks!
Olá! Excelente vídeo! Qual o produto que usas para retirar/limpar toda a graxa?
Gracias, mira en la descripcion del video
@@JavierRullanRuano só tem 2 links e ambos são da graxa/gel/pasta (não sei como se traduz grease 😆)
My 504x has a little oil coming out on the pan drag ring. Is that normal? Can the grease escape a little during transportation?
Entonces en cuanto al producto ... Al final no se utilizó el que ponía que era adecuado ...
Buen video, bien explicado gracias por aportar 😍😍😍!
Gracias!
Interesante, no parece muy complicado, gracias por subir el video!
Gracias!
Bien hecho amigo, facil y muy util!
Gracias!
Excellent video! Thank you very much
Glad to help!
anyone know how to remove the fluid knob on the other side?
Does anybody have a similar video for the Manfrotto Nitrotec N8? I have gone through three units so far (2 replaced under warranty). The dealer told me that they are not fluid heads and have rather cheap plastic parts inside and the grease becomes really sticky after some use. Sad cause I paid a very high price for mine.
Excelente video amigo gracias por aportar a la comunidad! queria recurrir a su sabiduría para ver si me puede ayudar con my fluid head MVH502AH, lo que pasa es que el mio ya no ajusta al 100% el tornillo de bloqueo del giro horizontal... lo ajusto al máximo pero igual el cabezal gira un poco y hace un chillido :/ espero su respuesta! tenga buen dia!
En el video se ve como opera ese tornillo de bloqueo del pan, desmonte y compruebe su desgaste, sui fuera necesario hay que sustituirlo.
@@JavierRullanRuano muchas gracias!
Super Video
Thanks!
What would prompt you to do this maintenance work? Did you notice any issues? Also, if it is routine, how often do you expect to need to regrease your head?
You only have to do it when you notice that the head has lost fluidity, due to the passage of time, the heat or the cold because it has gotten wet
Hola compañero, tengo un problema con el fluid drag system de mi tripode MVH502A, tu me podrías dar una pequeña asesoría? de antemano muchas gracias!
Claro, mandame un correo privado
Hola, ¿Que tripode es? Gracias
Manfrotto 547BK
Is it okay any NLGI 3 greese? not OKS product?
If it's type 3 density it should work...
what name grease you use?
what is the name of the lubricant you use?
See description
👍👍👍
Grazie. Per favore, i 3 pezzi di plastica che vanno sotto il foro vite, non si riesce a capire come rimontarli, essendo il video troppo veloce nella parte del smontaggio. Mi potresti dare una mano per favore?
Formano un quadrato, si montano con la parte triangolare rivolta verso l'interno, con la linea segnata sulla plastica verso l'esterno della scatola metallica dove si incastra, spero di averti aiutato, saluti
@@JavierRullanRuano non so come ringraziarti, Davvero davvero davvero gentilissimo! Eventualmente, Per essere sicuro, potrei mandarti una foto per vedere se è corretto ciò che ho capito? Dove potrei inviarla? Grazie ancora di cuore❤
@@giuseppecalifano2575 Mandami un'e-mail alla mia e-mail su RUclips e ti mando una foto
Perfetto. Troppo buono😊
@@JavierRullanRuano mi spiace non riesco a trovare la tua email nella tua descrizione di RUclips. Come posso fare? Ti ringrazio
Why ?? I will send it back 😆
Estoy viendo este video justo después de que me doy cuenta que la vaselina no sirve 🤣
Efectivamente es necesario una grasa muy consistente para que funcione bien