I bought the Rex Zero. I totally recommend it. Fantastic fit and finish to go along with the accuracy and reliability. Can't go wrong with this one guys.
HK the one I trust the most. And Sig. CZ after those. But my main carry is an HK P30. But I encourage everyone to find what they trust most on their own. Plently of trustworthy guns out there.
That's a good point - not a single bad primer or hard primer that needed a double strike, and every round had gas in its tank as well. Good job Fiocchi.
I've fired thousands of cheap blank 9mm rounds and so far not one bad primer. I am not surprised by 1000 rounds of Fiocchio 9mm Para not having any problems.
Yes, well, I've had over 1 million rounds every 3 months go downrange at my facility, and seen plenty of bad rounds, from every manufacturer out there, as we've tried them all.
I have shot quite a lot (10k-12k??) of S&B 9mm, zero problems. Magtech is also pretty solid performer. But I hve shot that less than 2k. Geco on the otherhand, I have had two low charges in 2k rounds. When I bought my first 9mm, S&W Sigma (=POS), I bought Norinco yellow box ammo for it. There were two case ruptures before I got to 100rounds. Never bought that again...
Amazing firearm but the video I feel is also a great testament to the reliability of Fiocchi ammunition. Goes bang every time, comes in good configurations with proven bullet types, and priced low enough to where it doesn’t break the bank to shoot a lot of it.
Based on all the testing you did with the Averex Rex 1 I am confident that this is a pistol I want! Thank you very much for all your hard work and reviews.
This video along with the elemental test video sold me on the gun 4 years ago. The compact version has now been my EDC for over 3 years (using battleborn grease as well), and I am nothing but impressed with the pistol.
@@wcstrawberryfields8011 I haven’t actually held the standard version, but the compact grip fits well with a standard medium and large man’s (or woman’s) hand. My wife says it’s a reach for her hands though. Hope this helps
Its crazy because if you look close enough, you can seriously see that mirage MAC was talking about. This video and pistol are freaking impressive. Nice work!
Tim i started watching your channel when you did alot of 10mm testing. And now the Rex zero . I use to have a German made sig 226 . I sold that gun years ago and miss it! So i went and bought a rex and haven't been disappointed one bit! Thanks
Yet another excellent vid, Tim and crew. That handgun is clearly able to keep up with the best of them and then some. Don't give yourself tendonitis doing these extreme shoots too often, Tim!
Love this test, would love to see this done with other guns on your channel. The important thing people need to understand is the way heat plays a part in inducing malfunctions and I am very impressed with the Rex after watching this.
Two things impressed me in this video. 1)Tim's forearm of steel. You guys have no idea how painful it is to shoot that many rounds with no rest. Many of us would not make it due to screaming pain in hand and forearm. It is all about a repetitive action and motion with a tight little muscle group that is not used to doing that action for a log time with no rest. The pain can actually reach a very high level. But Tim is a former US Marine. Jar Heads don't know about quitting. Not in their vocabulary! Pain just means you are still alive and can keep fighting to stay that way! :) 2) The gun grease. Impressive to hold up with all that heat. VERY interesting product!
Well Tim... Thanks to you for covering the Arex ReX Zero 1. I went into a local shop to buy an RM380 and sitting right behind it was the ReX. Had it not been for your videos I would have easily overlooked this gem of a pistol. The guy at the shop said he can't keep these in stock for more that a couple days. I shot about 150 rounds through it and I have to say it might just unseat my VP9 as my favorite pistol to shoot. The ReX grip looks deceptively simple but it really fits my hand and shoots incredibly well!
Afrer watching your video. I bought an Arex Zero 1 CP, and I took it to the range along with my Sig Sauer P229 Legion. Both of them performed flawlessly. I love them both. Thanks...
I bought a Makarov when I watched your test way back when, and now it looks like I'm buying an Arex. Darn you MAC Darn yooooooooooou!!! Joking darns aside I love your vids and find them entertaining and informative. I hope your business and channel keep thriving so you can continue to make these videos. Thank you.
1000 tiros sem parada, linda arma e com excelente em eficiência, a mão que quase não aguentou em amigão kkkk. Parabéns pelo vídeo, pq aqui no Brasil jamais teria como fazer isso, ficaria o zoi da cara.
I had no idea when I bought my Rex Zero it was capable of what I've seen in the two videos. I'm as blown away as Tim... and now, I feel smart for buying it. This thing may turn out to be the Colt Python of semi-autos.
Todd Jarret was able to do 1,000 rounds in 10 minutes - and he is one of the worlds best mag changer. Doing it in under 20 minutes is awesome. Thank you for being so honest in your reviews and non-offensive.
After watching your gauntlet test against the P226, and watching your other Rex Zero videos, as well as others, I decided to purchase a Rex Zero. Picked it up this week. Ran 400 rounds yesterday and over 200 today. Wow!!! What can I say? Fantastic firearm from Slovenia. Ammo used: Sig sauer, Freedom, Estate, Geco, Federal HST, and yes, Tula. Zero, yes, zero malfunctions. High accuracy at 10 yards with tight, tight groups. Smooth trigger pull, even the DA pull which is heavy, but consistently smooth without grit. I am so impressed with this firearm that as soon as my Rex Zero holster comes in from K-Var, my EDC will change from my P320 (which I still love) to my Rex Zero. Just my personal preference. Thanks for bringing this sweet firearm to my attention.
Hi, MAC I'm from homeland of REX Zero1 and I was surprised over that test result, not to mention your reliability mud test. About 3-4 years ago, I was present at a national IDPA match (still in factory testing phase), and couldn't empty 1 whole mag without hiccups. Put that to aside, looks like development folks did a good job since then. Suggestions for your reliability test. Walther P-38, TT-33... and just for curiosity SA revolver vs. DA revolver in the same cal. for a fair comparison. Keep on running one of the best RUclips gun channels!
I will have one in the collection soon, I have been telling my father about this hand gun as he has the SIG 226, he has watched your videos and was impressed as well. Thanks for the great videos
After 1/4 of the way through the video I was thinking "man I need a life, where is the TV remote". After 1/2 way through the video I was thinking "hmmm, this is kinda neat". After 3/4 of the way through the video I was routing for both the pistol and MAC to make it the full 1,000 rounds. By the end of the video I had a big smile on my face and was thinking "man, that was a fun video". Well done MAC!
Fiocchi ammo is very good. I have many rounds in many calibers and have never had a problem with it. It is also reasonably priced and loaded a little hotter than most other ammo brands.
Military Arms Channel for me personally I feel a lot safer knowing that most criminals can't easily access guns, in the UK even in rough areas I don't fear for my life
I Cannot speak for him but personally i am glad there is such strict regulations on firearms in Denmark. It is perfectly legal to own a semi automatic rifle of any kind and take it to a shooting range, but you must have a hunting license which takes about a year to get with many classes and several difficult exams. It does help reduce general gun violence, and promotes an extremely high level of gun safety both on and off the shooting ranges.
This video is what sold me on the Battleborn grease. Been using it on all of my firearms including my duty weapon and not a single issue and stays put even in hot or cold weather.
Hi points aren't as bad as people make them out to be. They definitely need lube and regular cleaning. But for a 100 dollar Saturday night special they honestly aren't too bad. No they wont win any competitions and they definitely wont win any accuracy challenges. But they will throw a little lead down range and make for a fun day.
Great little pistol, great test. I've been using this Battle Born grease last time around I went shooting in Germany (spending too much working time in the UK lately) and it's been very reliable in the 2 pistols and 3 rifles I took out including that same day and my very first CZ SP-01 I purchased after you showed it off and had to take the plunge. The "motorcycle race" sounded like a dive bomber, kinda random. Hopefully you'll have avoided some form of tendinitis after this or cuts and grazes from reloading even with the loaders for your mates.
I didn't think much of it since it's a Sig clone but considering that the only Sig I own won't run right and the Rex is a flame and lead throwing juggernaut that's as steady as a sewing machine I'm going to have to put my prejudice aside and give it a look. Thanks for the vids, I hope your wrist is feeling better by niw🤕
Hunter Jordan The Scorpion Carry I have is a pos, my Walter p22 is more reliable after 2000 rds of cheap bulk 22lr and no cleaning. The gun looks amazing but that's about all it's good for, but, if it ran as good as it looks I'd be supremely happy with it. I miss the Kimber Raptor that I sold to get it.
The gun is so well made our soilders cheifs (damn I forgot how they are called (2 ranks higher than private)) use them as their secondary. Before they used a beretta.
Greg Mason K-VAR is a distributor and only sells the item FIME Group is the importer who sells the Rex to all distributors. Arex in Slovenia is the actual manufacturer.
I am going to buy one now. Plus...I spent a week in western Slovenia at a rocket contest...gorgeous countryside and nice people. So a little give back makes me feel good.
Considering the price, the Arex is a great option, as it really is a Sig226 with a better slide stop/safety mech - I am a long time 226 shooter, as I was an adjunct instructor for Sig Sauer Academy for years back in the early 2000s, and due to my larger hands I would always have my thumb holding down the slide stop, resulting in no lock open on empty magazines. This pistol would correct that for me, plus a bonus +2 rounds in standard magazines. I wonder if 226 sights fit on it? I don't think grips will due to the different ergo/control position, but sights for me = big dots or no go, which would be the only thing holding me back from running one of these for a while. Anyhow, great test. As you said, few shooters ever put this many rounds downrange in a day, let alone 15 minutes, and it's an important measure of what the service life will be like. Having put 1 million rounds of Winclean and Frangible ammo downrange each quarter (3 months) on my range, through every type of pistol known to man, I've seen what lasts and how long through the most reliable test method out there - a lot of shooting in short periods of time. 30,000 service life is very decent, and I believe it to be pretty accurate in this case based on the wear - lack thereof - and the information out there about the components and manufacturing methods they are using at Arex.
ya said ya ONLY HAD 22 mags to work with...geez! I'm struggling to find extra mags for my Rex Zero 1 Compact amongst the idiocy of covid-19 & rioting shortages in October 2020! got 2 extra 17 rounders locally & my original 15 rounders (x 2) for now
Fantastic gun for a fantastic price! Actually with the money saved you can afford the gun and 1000 rounds at today’s crazy prices on ammo! Thanks for the video.
Awesome video as always guys thank you. if the opportunity arises something I'd really like to see is the PMG Stryk-A/B run through the gauntlet and possibly even this test as well in order to see how it's new barrel locking system holds up to this kind of abuse. I would also like to know what your thoughts are on the pistol in general because I am interested in purchasing one but I really can't find a lot of information about them and your video from I believe a year ago about it is the most information I've been able to find.
Great Video Mac and team. I didn't realize the pistol had a full length rail. Do you think that has anything to do with its go to hell and back reliability? I also swear by those loaders! Greatest invention EVER! If any of my shooting buddy's don't have one in their range bag it's my go to Xmas gift. Thanks again guys. Speaking of Xmas I know what I'm asking the wife for this year! Haha
Had to buy one after watching this and very very satisfied with my purchased to say the least just a well built and quality gun worth the money well worth it!!!!
Well color me impressed. The Rex Zero 1 has definitely gone from being completely unknown to me to being high on my list to buy, thanks to your videos. On an unrelated note, it was funny to see how you slowed down a little when you switched to firing with your left hand. Even for a man who shoots for a living like yourself, off-hand shooting is more difficult. That was a good reminder for me to go do some more left hand dry fire drills today, because you can never have enough training! So thanks for the inspiration to keep training!
Thuroughly impressed with the pistol! But I'm going to have to forward this video to the International Bureau of Manly Men. For them to investigate a possible revocation of your man card. Seemed to be an awful lot of whining going on while firing a pistol...😳
Hey, I fired all 1000 rounds in 14 minutes. James Yeager did a 1000 round test in 14 minutes but kept switching out shooters because they got tired. My man card is fully in tact. That, and the glock 19 he was using had 7 failures and the guide rod broke. ruclips.net/video/0_JuF23qazI/видео.html
MAC, I was wondering if you are going to have more videos of the IWI Jericho 941? And are you going to review the .308 Galil ACE? after your review of the Tavor I have seriously considered the rifle. Thank you for that and everything you do.
If I find myself in need of another 9mm pistol, this one is at the top of my list. Your videos of it have thoroughly impressed me. Is there any consideration of doing the elemental test/ gauntlet on a Lionheart?
Arex and Fiocchi have just earned themselves a future customer and brand loyalist.
I bought the Rex Zero. I totally recommend it. Fantastic fit and finish to go along with the accuracy and reliability. Can't go wrong with this one guys.
This really helped me with my 17 times tables! Thanks for posting.
Always good to see a plan come together!!
Mrgunsngear Channel The A-Team
guns and gear you should try to do your own torture tests
Mrgunsngear Channel can you do 3000 rds in 13 minutes of course you can lol
Can you do a video like this, Please!
true
This is proof that sig,glock, and smith are not the only ones that make a durable top notch pistol.
Dont forget Cz, Beretta
Or Hk or FN
I’ve only known about them for a few months but,they really are a fine firearm.
I own the Arex Zero 1T and havent had a single issue with it great quality for what you are getting
HK the one I trust the most. And Sig. CZ after those. But my main carry is an HK P30. But I encourage everyone to find what they trust most on their own. Plently of trustworthy guns out there.
Impressed by the ammo. Rare to shoot a case of 1000 rounds with no duds. Gun did good too.
That's a good point - not a single bad primer or hard primer that needed a double strike, and every round had gas in its tank as well. Good job Fiocchi.
I've fired thousands of cheap blank 9mm rounds and so far not one bad primer. I am not surprised by 1000 rounds of Fiocchio 9mm Para not having any problems.
I've shot thousands of the cheapest bulk remanufactured stuff I could find online and never had a bad round.
Yes, well, I've had over 1 million rounds every 3 months go downrange at my facility, and seen plenty of bad rounds, from every manufacturer out there, as we've tried them all.
I have shot quite a lot (10k-12k??) of S&B 9mm, zero problems. Magtech is also pretty solid performer. But I hve shot that less than 2k. Geco on the otherhand, I have had two low charges in 2k rounds. When I bought my first 9mm, S&W Sigma (=POS), I bought Norinco yellow box ammo for it. There were two case ruptures before I got to 100rounds. Never bought that again...
I gotta shoot this thing next time I'm out there. The videos continue to impress me.
+TheGunCollective It's as tough as my pet Makarovs.
Dude, this is UNREAL. That was the fastest I've ever seen 1000 in a semi auto pistol.
TactiCalifornia look up para ordnance 1000 round test. the guy who does it is goofy, but he does 1000 rounds really fast
remember the time crisis and house of the dead video games? LOL i beg to differ! OH WAIT...irl...yeah
TactiCalifornia Jordan Winkler did a sig p320 in a similar timeframe
The guy who does it is Todd Jarrett. He's one of the baddest guys on the planet with a pistol.
i am lucky to get 3 rounds out of my black powder rifle in one minute.
Amazing firearm but the video I feel is also a great testament to the reliability of Fiocchi ammunition. Goes bang every time, comes in good configurations with proven bullet types, and priced low enough to where it doesn’t break the bank to shoot a lot of it.
Based on all the testing you did with the Averex Rex 1 I am confident that this is a pistol I want! Thank you very much for all your hard work and reviews.
This Coronavirus really just had me watch a guy shoot a gun for 21 minutes
Kaidon Mocko me too
Same here...
See there's the silver lining
Because you're a good little sheep the coronavirus didn't affect me I didn't let it and those who did we're LED just like good little sheep😂😂😝😝
@@ericbergfield6451
&9
This video along with the elemental test video sold me on the gun 4 years ago. The compact version has now been my EDC for over 3 years (using battleborn grease as well), and I am nothing but impressed with the pistol.
Hey Jacob, is the grip-to-trigger reach a bit shorter on the Compact?
@@wcstrawberryfields8011 I haven’t actually held the standard version, but the compact grip fits well with a standard medium and large man’s (or woman’s) hand. My wife says it’s a reach for her hands though. Hope this helps
Oh- "battleborn" - I'm sure with a name like that- it has to be superior to any other grease.😂
Its crazy because if you look close enough, you can seriously see that mirage MAC was talking about. This video and pistol are freaking impressive. Nice work!
Tim i started watching your channel when you did alot of 10mm testing. And now the Rex zero . I use to have a German made sig 226 . I sold that gun years ago and miss it! So i went and bought a rex and haven't been disappointed one bit! Thanks
This is probably the most impressive testing I have seen of a pistol
No commercial/advertisement/marketing firm could do what you just did for this gun! I purchased one simply off of watching three videos from you!
This pistol continues to impress. I'm going to have to pick one up just because..awesome video yet again MAC.
Yet another excellent vid, Tim and crew.
That handgun is clearly able to keep up with the best of them and then some.
Don't give yourself tendonitis doing these extreme shoots too often, Tim!
Ignore the trolls Tim they just hate the fact that you get to do this outside of your normal job. Keep up the amazing work =D
Thank you, sir. Trolls don't phase me in the slightest. :)
Love this test, would love to see this done with other guns on your channel. The important thing people need to understand is the way heat plays a part in inducing malfunctions and I am very impressed with the Rex after watching this.
That's a great gun. I definitely wouldn't have considered it near as much until seeing all the testing you've done. Good stuff for sure
Purchased this pistol today just because of you man 🥰👍
I can't even begin to estimate how many Rexes you guys sold with this video :)
Ordered mine Friday. My FFL called today, I'll be picking it up tomorrow.
Влад Борисыч this week ima order one
Влад Борисыч Got my ReX after seeing Tim's tests and watching other reviews. I also got the Hogue grips and I'm very happy with it.
I bought one plus the fancy hand grips. Yes I did.
Larry Baker I ended up buying the green grips.
It is indisputable, the Military Arms Channel put this gun on the map; and at the top of many enthusiasts wish lists.
I have been wait for this since I saw the post on Instagram.
Two things impressed me in this video.
1)Tim's forearm of steel. You guys have no idea how painful it is to shoot that many rounds with no rest. Many of us would not make it due to screaming pain in hand and forearm. It is all about a repetitive action and motion with a tight little muscle group that is not used to doing that action for a log time with no rest. The pain can actually reach a very high level.
But Tim is a former US Marine. Jar Heads don't know about quitting. Not in their vocabulary! Pain just means you are still alive and can keep fighting to stay that way! :)
2) The gun grease. Impressive to hold up with all that heat. VERY interesting product!
Well Tim... Thanks to you for covering the Arex ReX Zero 1. I went into a local shop to buy an RM380 and sitting right behind it was the ReX. Had it not been for your videos I would have easily overlooked this gem of a pistol. The guy at the shop said he can't keep these in stock for more that a couple days. I shot about 150 rounds through it and I have to say it might just unseat my VP9 as my favorite pistol to shoot. The ReX grip looks deceptively simple but it really fits my hand and shoots incredibly well!
In 15 minutes you caused 9mm price per round to increase by 5 cents.
I bought my rex zero 1 the first week it was released and it has been amazing.
Wow! I'm impressed! Nice job Tim and crew! Definitely a pistol worth considering!
I think you need a 1000 round test with a Glock or a Sig, just to put this test into perspective.
beretta 92 and M&P 2.0 as well
I mean, they have to pass the torture test first.... glock probably could but Sig already failed.
@@OnyXTurboPickle you can see hickok45's glock 19 1000 round test, where he has 3 failures
Underdog he's old though.
@@underdog1252 ooiiiuyt
I have the Zero 1 and it shoots great. I want to start using that gun grease.
Back again to pay homage to this legend
Afrer watching your video. I bought an Arex Zero 1 CP, and I took it to the range along with my Sig Sauer P229 Legion. Both of them performed flawlessly. I love them both. Thanks...
Niiiiice. Have to put that gun on my must have list!
+Brad Vlogs Me too
Its like the a super sig
Brad Vlogs It seems better than a Sig!
Retired AF CE
Basically a 500 dollar SIG....but better...ill take one of those.
Brad Vlogs thats what I am thinking!
I bought a Makarov when I watched your test way back when, and now it looks like I'm buying an Arex. Darn you MAC Darn yooooooooooou!!! Joking darns aside I love your vids and find them entertaining and informative. I hope your business and channel keep thriving so you can continue to make these videos. Thank you.
+SwordsmanCaim Thank you!
Now that's ejection.
Murphy82nd... very nice i agree
Tevž Kahuna *erection
Murphy82nd now that's a supply drop
EET FUK ejaculation
@@praisethelord6783ghkktỳy4
That's pretty outstanding, even more so with it having a $600 price tag out the door.
1000 tiros sem parada, linda arma e com excelente em eficiência, a mão que quase não aguentou em amigão kkkk. Parabéns pelo vídeo, pq aqui no Brasil jamais teria como fazer isso, ficaria o zoi da cara.
I had no idea when I bought my Rex Zero it was capable of what I've seen in the two videos. I'm as blown away as Tim... and now, I feel smart for buying it. This thing may turn out to be the Colt Python of semi-autos.
Tim, I got so excited that I subbed. Again
Todd Jarret was able to do 1,000 rounds in 10 minutes - and he is one of the worlds best mag changer. Doing it in under 20 minutes is awesome. Thank you for being so honest in your reviews and non-offensive.
That pistol has my respect now...no parts popped out of it like some videos of other pistols trying to do 1000 rounds continuously.
Steve austin cough glock cough cough.
Wow. That gun is amazing.
Seeing is believing,I am going to purchase one soon, Best test yet! Thanks
Im impressed you did not pass off the gun . also very impressive Weapon !
Great Video brother .
Thank you.
Thank you Tim. After seeing this i will be retiring my S&W MP..I really like the way the Arex has preformed at everything you have thrown at it.
To hell and back reliability!
By another company!
After watching your gauntlet test against the P226, and watching your other Rex Zero videos, as well as others, I decided to purchase a Rex Zero. Picked it up this week. Ran 400 rounds yesterday and over 200 today. Wow!!! What can I say? Fantastic firearm from Slovenia. Ammo used: Sig sauer, Freedom, Estate, Geco, Federal HST, and yes, Tula. Zero, yes, zero malfunctions. High accuracy at 10 yards with tight, tight groups. Smooth trigger pull, even the DA pull which is heavy, but consistently smooth without grit. I am so impressed with this firearm that as soon as my Rex Zero holster comes in from K-Var, my EDC will change from my P320 (which I still love) to my Rex Zero. Just my personal preference. Thanks for bringing this sweet firearm to my attention.
Hi, MAC I'm from homeland of REX Zero1 and I was surprised over that test result, not to mention your reliability mud test.
About 3-4 years ago, I was present at a national IDPA match (still in factory testing phase), and couldn't empty 1 whole mag without hiccups. Put that to aside, looks like development folks did a good job since then.
Suggestions for your reliability test. Walther P-38, TT-33... and just for curiosity SA revolver vs. DA revolver in the same cal. for a fair comparison.
Keep on running one of the best RUclips gun channels!
Agreed 100%. SA v. DA revolver would be amazing. GP-100 v. Blackhawk?
I will have one in the collection soon, I have been telling my father about this hand gun as he has the SIG 226, he has watched your videos and was impressed as well. Thanks for the great videos
I hate seeing videos of guns that are banned in my state but I also love it so much 😭
After 1/4 of the way through the video I was thinking "man I need a life, where is the TV remote". After 1/2 way through the video I was thinking "hmmm, this is kinda neat". After 3/4 of the way through the video I was routing for both the pistol and MAC to make it the full 1,000 rounds. By the end of the video I had a big smile on my face and was thinking "man, that was a fun video". Well done MAC!
Thank you! I'm glad you enjoyed it.
Fiocchi ammo is very good. I have many rounds in many calibers and have never had a problem with it. It is also reasonably priced and loaded a little hotter than most other ammo brands.
The fact that the grease never burned off was pretty impressive too.
that things an absolute tank. know what im buying when i move back to the states.
Impressive doesn't do this justice. This was utterly amazing!
Now do the same test with your 1861 springfield.
Who is watching in 2020?? What a video!
"I don't think we can kill this thing..." at around 15 minutes. That sounds like a challenge for Iraqveteran8888 to me. Just sayin'...
I'm not done trying.
Great video! And you did all the shooting in one solid take. Well done! That pistol is amazing.
Thank you.
"I only have 23 magazines to work with."
Great video Tim! love these videos, thanks for making them.
Last time I was this early Google didn't own RUclips
月食 Wtf does this joke have to do with the video?
Mac is the man, thank you guys.
Thank you for watching!
@@Militaryarmschannel This video is impressive on many levels, from gun to how much work you guys put in.
Both happy and sad that guns are illegal in my country, but i still love to learn about stuff like this. :)
What makes you happy about guns being illegal in your country?
Military Arms Channel for me personally I feel a lot safer knowing that most criminals can't easily access guns, in the UK even in rough areas I don't fear for my life
I Cannot speak for him but personally i am glad there is such strict regulations on firearms in Denmark. It is perfectly legal to own a semi automatic rifle of any kind and take it to a shooting range, but you must have a hunting license which takes about a year to get with many classes and several difficult exams. It does help reduce general gun violence, and promotes an extremely high level of gun safety both on and off the shooting ranges.
kay4x4
what country do you live in?
I feel you, but I dont think that guns are absoloutely illegal in your country.
This video is what sold me on the Battleborn grease. Been using it on all of my firearms including my duty weapon and not a single issue and stays put even in hot or cold weather.
When you need to train, but don't have all day....
That's why they call it the rex zero for zero malfunctions.
My highpoint did 100 rounds in 1 hr.
My friend owns a 9mm HP and comes over and shoots that ugly thing every weekend and it has yet to ever malfunction infront of me.
Follow The Grow Just give it time gun is shit freinds don't let freinds own hi points
@@jrc2976 I mean...hi points are nice if you want a gun to just shoot whatever with and if it breaks eh who cares.
100$ funtoy.
My old French car did 100 miles in a month.
Hi points aren't as bad as people make them out to be. They definitely need lube and regular cleaning. But for a 100 dollar Saturday night special they honestly aren't too bad. No they wont win any competitions and they definitely wont win any accuracy challenges. But they will throw a little lead down range and make for a fun day.
Wow Rex Zero 1 Pistol looks really good and with a perfomance like this just won me over. Great Video Keep then Great Work you Do Coming!!!!
Great little pistol, great test. I've been using this Battle Born grease last time around I went shooting in Germany (spending too much working time in the UK lately) and it's been very reliable in the 2 pistols and 3 rifles I took out including that same day and my very first CZ SP-01 I purchased after you showed it off and had to take the plunge.
The "motorcycle race" sounded like a dive bomber, kinda random. Hopefully you'll have avoided some form of tendinitis after this or cuts and grazes from reloading even with the loaders for your mates.
Was there any picture taken of the pile of brass on the ground afterwards?
Nicely done! I love my Arex!
I didn't think much of it since it's a Sig clone but considering that the only Sig I own won't run right and the Rex is a flame and lead throwing juggernaut that's as steady as a sewing machine I'm going to have to put my prejudice aside and give it a look.
Thanks for the vids, I hope your wrist is feeling better by niw🤕
it's a less precise sig clone, more field-minded
Hunter Jordan
The Scorpion Carry I have is a pos, my Walter p22 is more reliable after 2000 rds of cheap bulk 22lr and no cleaning. The gun looks amazing but that's about all it's good for, but, if it ran as good as it looks I'd be supremely happy with it. I miss the Kimber Raptor that I sold to get it.
sig+zastava+cz=rex
The gun is so well made our soilders cheifs (damn I forgot how they are called (2 ranks higher than private)) use them as their secondary. Before they used a beretta.
I really like how you were utilizing that weapon ambidextrously! It just goes to show how excessively superb that side arm is! 🤯🤯😮🖖🏼
I liked this gun so much I purchased two. Better than a Sig at half the price, what's not to love?
Thank you all so much for your videos. I just placed in an order for one of these.
You should interview someone from Kvar Corp and ask them why their gun works so well and what they did different than Sig
Greg Mason K-VAR is a distributor and only sells the item FIME Group is the importer who sells the Rex to all distributors. Arex in Slovenia is the actual manufacturer.
Arex then
I am going to buy one now. Plus...I spent a week in western Slovenia at a rocket contest...gorgeous countryside and nice people. So a little give back makes me feel good.
Considering the price, the Arex is a great option, as it really is a Sig226 with a better slide stop/safety mech - I am a long time 226 shooter, as I was an adjunct instructor for Sig Sauer Academy for years back in the early 2000s, and due to my larger hands I would always have my thumb holding down the slide stop, resulting in no lock open on empty magazines. This pistol would correct that for me, plus a bonus +2 rounds in standard magazines. I wonder if 226 sights fit on it? I don't think grips will due to the different ergo/control position, but sights for me = big dots or no go, which would be the only thing holding me back from running one of these for a while.
Anyhow, great test. As you said, few shooters ever put this many rounds downrange in a day, let alone 15 minutes, and it's an important measure of what the service life will be like. Having put 1 million rounds of Winclean and Frangible ammo downrange each quarter (3 months) on my range, through every type of pistol known to man, I've seen what lasts and how long through the most reliable test method out there - a lot of shooting in short periods of time. 30,000 service life is very decent, and I believe it to be pretty accurate in this case based on the wear - lack thereof - and the information out there about the components and manufacturing methods they are using at Arex.
Have one and love it but don’t forget HK 😎
At about 10:15 I was going to comment how impressed I was with the ejections, and then you made the same comment. Nice.
ya said ya ONLY HAD 22 mags to work with...geez! I'm struggling to find extra mags for my Rex Zero 1 Compact amongst the idiocy of covid-19 & rioting shortages in October 2020! got 2 extra 17 rounders locally & my original 15 rounders (x 2) for now
Fantastic gun for a fantastic price! Actually with the money saved you can afford the gun and 1000 rounds at today’s crazy prices on ammo! Thanks for the video.
Awesome video as always guys thank you.
if the opportunity arises something I'd really like to see is the PMG Stryk-A/B run through the gauntlet and possibly even this test as well in order to see how it's new barrel locking system holds up to this kind of abuse.
I would also like to know what your thoughts are on the pistol in general because I am interested in purchasing one but I really can't find a lot of information about them and your video from I believe a year ago about it is the most information I've been able to find.
Great Video Mac and team. I didn't realize the pistol had a full length rail. Do you think that has anything to do with its go to hell and back reliability? I also swear by those loaders! Greatest invention EVER! If any of my shooting buddy's don't have one in their range bag it's my go to Xmas gift. Thanks again guys. Speaking of Xmas I know what I'm asking the wife for this year! Haha
When will they make this gun in 10mm? I would be waiting for that day.
Had to buy one after watching this and very very satisfied with my purchased to say the least just a well built and quality gun worth the money well worth it!!!!
What can i say...kaj naj rečem? Sig,you can eat yourself :)...here comes our Slovenian miracle. Hvala za video..thanks for the video.
swissie here, SIG on suicide watch :D
that was just incredible to watch
I was losing my mind seeing the same magazines being used and reused as the others sat on the barrel.... awesome pistol!
Hopefully it will still be around to buy when i can afford it lol.
Well color me impressed. The Rex Zero 1 has definitely gone from being completely unknown to me to being high on my list to buy, thanks to your videos. On an unrelated note, it was funny to see how you slowed down a little when you switched to firing with your left hand. Even for a man who shoots for a living like yourself, off-hand shooting is more difficult. That was a good reminder for me to go do some more left hand dry fire drills today, because you can never have enough training! So thanks for the inspiration to keep training!
Thuroughly impressed with the pistol! But I'm going to have to forward this video to the International Bureau of Manly Men. For them to investigate a possible revocation of your man card. Seemed to be an awful lot of whining going on while firing a pistol...😳
ShooterSD72 is the penalty removal of the tactical beard?
+wild bill Could be...? Not for me to decide, they may bust him back down to a goatee. Im sure the Bureau will straighten everything out...😁
ShooterSD72 dude that comment made my day. That may win you the internet for the day.
ShooterSD72 thats funny shit lol
Hey, I fired all 1000 rounds in 14 minutes. James Yeager did a 1000 round test in 14 minutes but kept switching out shooters because they got tired. My man card is fully in tact. That, and the glock 19 he was using had 7 failures and the guide rod broke. ruclips.net/video/0_JuF23qazI/видео.html
That ammo is made less than 5 minutes from my home. That's awesome keep up the great work mac
Thank you and thanks for watching.
ppq or cz next for gauntlet? i know you it's not easy to get all these guns, keep up the good work!
justin nolan 1911 just because I think it will fail miserably like the Sig legion did.
I am IMPRESSED!!! Now if this company would make a pistol carbine to go with this I'd be in heaven.
MAC, I was wondering if you are going to have more videos of the IWI Jericho 941? And are you going to review the .308 Galil ACE? after your review of the Tavor I have seriously considered the rifle. Thank you for that and everything you do.
I have 8 Sig handguns, five 229, two 226 and one 220 but my Arex Rex Zero 1 will be here tomorrow. Excited to compare...good video!
Well, what was the verdict? I’m trying to decide between the 226 and the Zero 1
can this be a series?
We'll do more, but finding the ammo to do this a lot would be challenging. :)
Just bought it yesterday 😃
How is it?
If I find myself in need of another 9mm pistol, this one is at the top of my list. Your videos of it have thoroughly impressed me.
Is there any consideration of doing the elemental test/ gauntlet on a Lionheart?
Pistola espetacular!!👏👏🇧🇷🇧🇷