When you talk about second order reactants at 5:13 and 6:25, I think there is a mistake on the tables. Doubling the concentration of a second order reactant will multiply the rate by FOUR between the trials, not square it. At 5:13, if you work out the rate order for A algebraically (rate1/rate2 = ([reactant]/[reactant])^order of reactant) the math is as follows: 2x10^-3/ 4x10^-3 = (0.1M /0.2M)^x which simplifies to 1/2 = (1/2)^x. X is 1 in this case which would indicate a first order reactant, not a second order one. For it to be second order, the rate for experiment two would have to be 8x10^-3 M/s. Similarly, the rate for experiment 1 should be 32x10^-3 M/s if you doubled the concentration of A again. There is a similar issue with the example problem at 6:25. The algebraic set up to find the order of A would be 3x10^-3/ 9x10^-3 = (0.1M/ 0.2M)^x which simplifies to 1/3 = (1/2)^x. X would have to equal 2 for it to be a second order reactant, but it does not equal 2. For the table to indicate a second order reactant I believe experiment 3 would have to have a rate of 12x10^-3 M/s. Here is my work: 3x10^-3/ 12x10^-3 = (0.1M/ 0.2M)^x which simplifies to 1/4 = (1/2)^x which simplifies to x=2. I would love to hear what someone think about this. I am a chemistry student teacher who is relearning kinetics in order to eventually teach it myself so naturally I want to get my facts straight. I very well could be wrong here but in my quest to master kinetics I have found that this video's explanation of second order reactants doesn't jive with other sources I've found such as this resource on page 11: apchemistrynmsi.wikispaces.com/file/view/12+Kinetics.pdf
I just went over this with my students, who watched this video for homework. You are right. I think that Paul was thinking that the rate would be squared (e.g., 3^2 = 9), which is where he got the 9 in the table instead of 12. But the rate should increase by a factor of four, like you are saying.
I believe the answer for the 6:50 question Is the rate order is 2. I believe this is correct because the M/s (Molarity/second) concentrations are multiplied by 2. I understand the difference between first-order and second-order as, first order the M/s concentrations are multiplied and the second-order M/s concentrations are squared, cubed, or to a greater power.
@@MarsiRod-j6l to get B: keep A the same and find 2 experiements where B doubles and A stays the same (exp 1 & 2): look at the rate, the rate doesnt change, therefore its a 0th order for B hope that makes sense
@@MarsiRod-j6lif you include the exponents it would look like: rate = k•[A]^1•[B]^1 Therefore when you add up the exponents it is = 2. (When you raise a number to the 1 power, it does not change. Which is why they don’t include the ^1 in either A or B) But when you ask did we know that both A and B are first order (^1)? I’m basing my answer off the fact when you look at the chart, when you double the concentration of A you get a Rxn rate of 6, and when you double the concentration of B you get the same answer as you do with A. That informs us that they are equal and likely first order. Had A or B been a second order, the Reaction rate would’ve gone up to 9.
For the question at 6:50, i got rate=k[A][B] (I am assuming I don't need to put the 1's since it is already implying first order for both). Correct me if I am wrong please.
I think the rate of each experiment is considered overall for that experiment. In experiment 1 they both started out with 100 M and that resulted in a rate of 3 *10^-3. In the second experiment the change was made to reactant B where it M was increased to 200 (reactant A remained at 100 M), then the "overall" rate of that experiment is 6*10^-3( first order because it went from 3 to 6). And in experiment 3, a change was made to reactant A but not B (I'm assuming that we are making our basis of changes around the standard 100 M of a reactant, so be is at 100). Similarly, the increase in M of reactant A in experiment 3 causes the "overall" rate of to be 6*10^-3 (first order because it went from 3 to 6 [compare experiment 1 and 3]). According to this video, the "overall" rate of reaction for this REACTION (not saying experiment here, we concluded this based on the EXPERIMENT though) would be to add the two order (exponential properties here?) of the reactants together. 1 + 1 = 2 or 2nd order.
I think the answer at 8:40 min should've been R=K[A] Since they both double which means they are proportional and that says it should be the first order NOT the 2nd
I have two questions: 1. Considering the information on reaction orders discussed in the video, how would you determine the overall reaction order for a reaction involving multiple reactants? 2. After discussing the rate law and reaction orders in the video, how would you explain the concept of rate constants (K) to someone new to chemistry?
At the min 3:28, the decomposition of ammonia was discussed in terms of reaction order. If the concentration of ammonia does not affect the rate; does this imply that temperature and catalyst presence are the only factors that can change the rate of a zeroth-order reaction?
When we are working on the overall order (7:30min), how do you know which plot to check first when determining the order of a reaction? Is there a standard approach, or do you just try all three ([A], In[A], 1/[A]) to see which one is linear like you mentioned? Also, is there a way to predict the reaction order based on the data before plotting?
Hello Mr. Andersen, at 6:21 : isn't the rate proportional to [A], so if the rate is increased by a factor of 3 (between the two trials), then [A] doesn't make a sense that it's doubling, right?. I am trying to match it with what I have in my textbook but I don't think i understand
I believe the difference between zeroth-order, first-order, and second-order are the rate/time graphs that each create. The first-order is a constant rate over time (straight horizontal line). The second-order is a straight line with a decreasing slope. The second-order is a curved decrease of rate over time.
Two questions: 1. In the context of reaction orders for a reaction involving multiple reactants, how does one determine the order with respect to each individual reactant and subsequently calculate the overall reaction order? 2. Explaining rate constants (K) to someone unfamiliar with chemistry: How can you elucidate the significance of rate constants in the context of the rate law and their role in quantifying reaction rates?
How do we determine that graphing the inverse of concentration over time results in a straight line connected to k without requiring advanced calculus, as discussed from 5:40 to 5:45 min? Is there a specific concept or method that support this?
4:38 shouldn’t it the rate over time be exponential too since rate is proportional to the concentration of A. Wouldn’t the graph of the rate over concentration of A make the straight like instead?
Very good and simple explanation of the topic highlighting how we can identify each order. If I may, can you elaborate on any limitations or exceptions where graphing might not be the best method to determine these orders?
This video was extremely helpful however when looking at the table of data shown at 6:08 you said that for compound A we double the concentration but because the rate is proceeding as a square the overall order must be 2. but isn't 3 multiplied by 10 to the -3 squared , 9 multiplied by 10 to the -6 instead of 9 multiplied by 10 to the -3?
Paul, please fix your mistakes for the two second order examples. If you double the concentration for a reactant that is second order, the rate will go up 4 fold, not the square of the original rate. Your stuff is so well done, I love to use your videos, but I cannot use this one with that mistake.
Thank u for Your Gr8 work Mr Anderson ! I love your videos..these r really helpful to even a guy like me who's sittin here in India..! i hope someday i'll be able to meet u and express my gratitude to u in person..!
If the order of [B] would have been 2, then the overall order of the reaction would have been 3. Third order reactions are generally the highest order reaction possible because higher orders require more molecules to react at the same time. Hope that helps!
Most Chem teachers don’t go beyond 2nd order for the sake of the student and the overall applicability of the concept, but there are orders beyond 2nd order
I really like how you explain everything, but I still have a little confuse on the overall reaction order. Can you explain the part were you identified if it is a zeroth-order, first-order and second-order? I would appreciated very much.
Considering the information about reaction orders discussed in the video, how would you determine the reaction order for a reaction involving multiple reactants?
How does changing the concentration of reactants in a chemical reaction impact the determination of the rate law order, and what role do experimental methods play in determining the order of reaction?
How can analyzing experimental data and reaction graphs help determine the order of a chemical reaction, and why is it important to understand the distinction between zeroth, first, and second-order reactions in practical applications like industrial processes or environmental studies?
I understood that the decomposition of ammonia is a zeroth-order reaction because the rate remains constant regardless of concentration changes. But how do we determine the reaction order for more complex reactions with multiple reactants?
@user-up8se8yf7s Yes, a reaction can have a zero order with respect to one reactant while having a non-zero order with respect to another reactant. This situation arises in complex reaction mechanisms where the reaction rate is determined by the slowest step, which may involve different reactants.
Temperature affects the rate constant k even in zero-order reactions because kk depends on the activation energy and temperature according to the Arrhenius equation. However, the reaction order generally does not change with temperature, since it is determined by the reaction mechanism.
Doesn't a second order straight line have a positive slope? 1/[A] = kt + 1/[A]( from integrated rate law) where 1/[A] is on the Y axis and a a slope = +k?
When we compare first-order and zero-order reaction graphics for the disappearance of reactant A with time, at which times during the reaction would you have trouble distinguishing a zero-order reaction from a first-order reaction? Thanks for your awesome tutorials. You explain every detail in an easy way to digest. This is the way! :)
To distinguish between zero-order and first-order kinetics, you need to conduct experiments and analyze how the concentration changes with time. Zero-order reactions show a linear decrease in concentration, while first-order reactions display exponential decay. So, conducting experiments and examining the reaction rate with respect to concentration is the most effective way to determine the reaction order.
How does the rate of reaction change over time for a zeroth-order reaction compared to a first and second-order reaction, as described in the integrated rate laws for each reaction order?
Yes, the initial velocity method can be applied with multiple reagents. The concentration of one reagent is varied while keeping the concentration of the other reagents constant, and the change in velocity allows the order to be determined with respect to the reagent being analyzed. This is repeated for each reagent.
Amazing job!!! Went into Chem lecture confident, left confused as fuck!! But after watching this simplified version the basics help make total sense of whats to come. Thank you bro!!!
When one has more than two reactions orders, how does one establish who goes first in the rate order, how does one add up both rates and how does one establish the graph of two reactions?
Does the atmospheric pressure influence the rate of reaction? If so, how do the changes in atmospheric pressure influence the different orders of reaction?
In a reaction, if changing the amount of one reactant doesn't affect the speed, but tripling another reactant makes the speed increase nine times, what is the order of the reaction for each reactant?
Thank you! I have a question: We know that in a zeroth-order reaction, we can change the concentration, and the rate stays the same, but what happens if we change the temperature?
Greetings! I was wondering if there are any exceptions where the concentration does not have a direct relation to the rate, specifically, that I should watch out for?
at 6:35, [A] is doubling, if it was 2nd order, shouldn't the rate quadruple (3 *4 = 12) instead of square? Rate = [A]^2 should become Rate = [x2]^2 = x4 the Rate?
How does the order of a reaction in the rate law relate to the molecularity of the reaction, and can this affect the overall calculations of the rate equation? And what if the "m" or exponent a negative number?
Upon doing some research it seems that the order of the reaction matches the molecularity of the reaction alot of reactions involving two reactant molecules typically has a second-order rate law. As of if "m" is negative, it seems that it indicates that the rate of the reaction decreases as the concentration of that particular reactant increases.
This helped me understand my lab, we did the crystal violent thing I have no idea what we did I did my lab report with general things like when x=0 and 1 it'll be decreasing, and only when x=2 it'll increase, for the second trial I got a bit of a curve and I put that I there must have been inaccuracies when I did the lab, not entirely sure what it meant but I do understand it a bit better after the video I'll re watch this when editing my lab since it's not due for another 2 days
If one were to be utilizing a method of collecting the data of a reaction, like spectroscopy for example, could the data collected of the emission or absorption be thus put in place of the concentration in the table and graph from there?
Excellent video, I have a question. How do changes in temperature and concentration of reactants influence the rate of a reaction? And with respect to the spectrophotometric analysis, is the absorbance equal to what the concentration has been? thank you
Isn't the reaction to the "zeroth" power suppose to be a straight line because (k) is a constant for that specific reaction and the first order is the one that makes a diagonal line ?
I'm a second semester uni student and you are seriously the only thing that allows me to do well sometimes. Thank you x1000 for all of your videos!
so you graduated now ??
Mr. Anderson,i would like to thak you for making efforts in explaining very complex chemistry , in simple words .thank you ,you are a life saver
Bozeman out there saving lives 🙌
When you talk about second order reactants at 5:13 and 6:25, I think there is a mistake on the tables. Doubling the concentration of a second order reactant will multiply the rate by FOUR between the trials, not square it. At 5:13, if you work out the rate order for A algebraically (rate1/rate2 = ([reactant]/[reactant])^order of reactant) the math is as follows: 2x10^-3/ 4x10^-3 = (0.1M /0.2M)^x which simplifies to 1/2 = (1/2)^x. X is 1 in this case which would indicate a first order reactant, not a second order one. For it to be second order, the rate for experiment two would have to be 8x10^-3 M/s. Similarly, the rate for experiment 1 should be 32x10^-3 M/s if you doubled the concentration of A again.
There is a similar issue with the example problem at 6:25. The algebraic set up to find the order of A would be 3x10^-3/ 9x10^-3 = (0.1M/ 0.2M)^x which simplifies to 1/3 = (1/2)^x. X would have to equal 2 for it to be a second order reactant, but it does not equal 2. For the table to indicate a second order reactant I believe experiment 3 would have to have a rate of 12x10^-3 M/s. Here is my work: 3x10^-3/ 12x10^-3 = (0.1M/ 0.2M)^x which simplifies to 1/4 = (1/2)^x which simplifies to x=2.
I would love to hear what someone think about this. I am a chemistry student teacher who is relearning kinetics in order to eventually teach it myself so naturally I want to get my facts straight. I very well could be wrong here but in my quest to master kinetics I have found that this video's explanation of second order reactants doesn't jive with other sources I've found such as this resource on page 11:
apchemistrynmsi.wikispaces.com/file/view/12+Kinetics.pdf
I just went over this with my students, who watched this video for homework. You are right. I think that Paul was thinking that the rate would be squared (e.g., 3^2 = 9), which is where he got the 9 in the table instead of 12. But the rate should increase by a factor of four, like you are saying.
Dauson Larrabee great job wow I think you are right
Dauson Larrabee and thank you
Agree, there is a mistake in the video.
who else is here at 5 in the morning before a test?
ten on a sunday morning, my weekends are just this: study study study...and coffee... :)
Conner Pace I got the AP exam tomorrow:/
I’m taking the AP Chem test in 3 hours
Bruh I have it in 30 minutes
@@timmyglasgow4979 How did that go?
I believe the answer for the 6:50 question Is the rate order is 2. I believe this is correct because the M/s (Molarity/second) concentrations are multiplied by 2. I understand the difference between first-order and second-order as, first order the M/s concentrations are multiplied and the second-order M/s concentrations are squared, cubed, or to a greater power.
I agree
The only rate law video that finally breached through my thick skull. Thank you Mr Andersen.
7 years of college and I finally get this concept thanks to this video. Keep up the good work, you're a life (and test score) saver!
Bro help a fellow bro out. Please tell me some sources for physical chem
My man explained clearly in 3 minutes what my professor hasn't been able to clarify in three days. Wow.
Hey
Hey, thanks for sharing your knowledge to help others learn too
Sup
thank you! helped me review for the ap chem test tomorrow
yo
is the answer: rate = k[A][B]
so a reaction order of 2?
what's the ans?
@@jass2312 it is a second order reaction cuz you add the exponents of A & B and you get 2 cuz each has an exponent of 1
@@Yankee4ever2 wait can u explain how u got the rate for B
@@MarsiRod-j6l to get B: keep A the same and find 2 experiements where B doubles and A stays the same (exp 1 & 2): look at the rate, the rate doesnt change, therefore its a 0th order for B hope that makes sense
@@MarsiRod-j6lif you include the exponents it would look like: rate = k•[A]^1•[B]^1
Therefore when you add up the exponents it is = 2. (When you raise a number to the 1 power, it does not change. Which is why they don’t include the ^1 in either A or B)
But when you ask did we know that both A and B are first order (^1)? I’m basing my answer off the fact when you look at the chart, when you double the concentration of A you get a Rxn rate of 6, and when you double the concentration of B you get the same answer as you do with A. That informs us that they are equal and likely first order. Had A or B been a second order, the Reaction rate would’ve gone up to 9.
For the question at 6:50, i got rate=k[A][B] (I am assuming I don't need to put the 1's since it is already implying first order for both). Correct me if I am wrong please.
Also, that video was very helpful.
+MoeBro25 yes that is correct
It its correct but overall its a 2nd order reaction
Incorrect. It should be rate = k[B] because A is zero order. When you doubled [A] the rate stayed the same, meaning it would be to the 0 power.
I think the rate of each experiment is considered overall for that experiment. In experiment 1 they both started out with 100 M and that resulted in a rate of 3 *10^-3. In the second experiment the change was made to reactant B where it M was increased to 200 (reactant A remained at 100 M), then the "overall" rate of that experiment is 6*10^-3( first order because it went from 3 to 6). And in experiment 3, a change was made to reactant A but not B (I'm assuming that we are making our basis of changes around the standard 100 M of a reactant, so be is at 100). Similarly, the increase in M of reactant A in experiment 3 causes the "overall" rate of to be 6*10^-3 (first order because it went from 3 to 6 [compare experiment 1 and 3]). According to this video, the "overall" rate of reaction for this REACTION (not saying experiment here, we concluded this based on the EXPERIMENT though) would be to add the two order (exponential properties here?) of the reactants together. 1 + 1 = 2 or 2nd order.
I couldn't get it from Atkins' book for days, but you explained it so clearly!! Thank you for your work. You are a talanted teacher.
This is SO timeless, thank you SO much for helping out students even after 10 years!!
After I finish the AP Chemistry series I will start on an AP Physics series.
🍎Oh Soo fun! Like sugar before bed.🤣
You need a Nobel prize.. You are out here saving lives!
That because some of us are fools studying right before test or just have teacher who can't teach
chemistry is hard for people though. So we use this to understand more.
Nobel Prize for Peace
Thank you. You explained it better than my textbook did.
The overall reaction order is 2, no?
1 and 1, right?
@@ahmedelsaid173 yes I think so too
I think the answer at 8:40 min should've been R=K[A]
Since they both double which means they are proportional and that says it should be the first order NOT the 2nd
studying for the MCAT and this super helpful! Thank you!
I have two questions:
1. Considering the information on reaction orders discussed in the video, how would you determine the overall reaction order for a reaction involving multiple reactants?
2. After discussing the rate law and reaction orders in the video, how would you explain the concept of rate constants (K) to someone new to chemistry?
You explain things so well and with quality. Thank you for the solid explanations
7:26 How do you calculate which order it is if after making a spreadsheet and filling the data, none of the graphs are a straight line?
At the min 3:28, the decomposition of ammonia was discussed in terms of reaction order. If the concentration of ammonia does not affect the rate; does this imply that temperature and catalyst presence are the only factors that can change the rate of a zeroth-order reaction?
When we are working on the overall order (7:30min), how do you know which plot to check first when determining the order of a reaction? Is there a standard approach, or do you just try all three ([A], In[A], 1/[A]) to see which one is linear like you mentioned? Also, is there a way to predict the reaction order based on the data before plotting?
Wishing you were my college chemistry teacher the way you teach things so clearly and concisely
this was so helpful, my exam is tomorrow and I feel a lot better already! THANK YOU
Hello Mr. Andersen, at 6:21 : isn't the rate proportional to [A], so if the rate is increased by a factor of 3 (between the two trials), then [A] doesn't make a sense that it's doubling, right?. I am trying to match it with what I have in my textbook but I don't think i understand
I believe the difference between zeroth-order, first-order, and second-order are the rate/time graphs that each create. The first-order is a constant rate over time (straight horizontal line). The second-order is a straight line with a decreasing slope. The second-order is a curved decrease of rate over time.
Two questions:
1. In the context of reaction orders for a reaction involving multiple reactants, how does one determine the order with respect to each individual reactant and subsequently calculate the overall reaction order?
2. Explaining rate constants (K) to someone unfamiliar with chemistry: How can you elucidate the significance of rate constants in the context of the rate law and their role in quantifying reaction rates?
Bozeman’s the real MVP. I actually feel like I might pass the AP exam tomorrow 😊
did u pass lmfao
At 6:28 if you solve that algebriacly you get approx. 1.58
(9*10^-3)/(3*10^-3) = k*0.2^m*0.1/(k*0.1^n*0.1)
3 = 2^m
m = log_2(3)
Thank you so much Mr. Anderson, this have made my life soooo much easier!!!
Thanks a lot. You teach well and concisely. Students will be benefited from you. Keep up!
How do we determine that graphing the inverse of concentration over time results in a straight line connected to k without requiring advanced calculus, as discussed from 5:40 to 5:45 min? Is there a specific concept or method that support this?
Would the correct answer for the table at 7:00min be first order reaction (rate=k[A])?
4:38 shouldn’t it the rate over time be exponential too since rate is proportional to the concentration of A. Wouldn’t the graph of the rate over concentration of A make the straight like instead?
Hello, Mr. Anderson. Thanks for the tips.
Steve Kerr if he didn't hoop.
Joshua Ramirez lmao
Nice explanation and easy tricks to solve problems. Thank you :)
6:02 If both concentrations of A and B are changing and it changes the rate, it there a way or formula to precisely figure the rate of A and B?
the answer is rate=k[A] [B] i think
thankyou so much for explaining this concept so well
answer 6:48
order of A=1
order of B=1
K=0.3
rate=3x10^-3
Very good and simple explanation of the topic highlighting how we can identify each order.
If I may, can you elaborate on any limitations or exceptions where graphing might not be the best method to determine these orders?
How does the fluidity of the cell membrane change in response to changes in temperature?
This video was extremely helpful however when looking at the table of data shown at 6:08 you said that for compound A we double the concentration but because the rate is proceeding as a square the overall order must be 2. but isn't 3 multiplied by 10 to the -3 squared , 9 multiplied by 10 to the -6 instead of 9 multiplied by 10 to the -3?
Paul, please fix your mistakes for the two second order examples. If you double the concentration for a reactant that is second order, the rate will go up 4 fold, not the square of the original rate. Your stuff is so well done, I love to use your videos, but I cannot use this one with that mistake.
Thank you- I was searching in the comments to see if I was incorrect in noticing this also, or if anyone else had pointed this out!
Thank u for Your Gr8 work Mr Anderson !
I love your videos..these r really helpful to even a guy like me who's sittin here in India..!
i hope someday i'll be able to meet u and express my gratitude to u in person..!
thankyou for this nice explanation and example which you took has made me to realize the concept well
phenomenal. please continue making videos you are an excellent teacher
So, [A] is 1 order and [B] is 1 order. Is the overall rate is 2?
+Luph9113 yes
If the order of [B] would have been 2, then the overall order of the reaction would have been 3. Third order reactions are generally the highest order reaction possible because higher orders require more molecules to react at the same time. Hope that helps!
Most Chem teachers don’t go beyond 2nd order for the sake of the student and the overall applicability of the concept, but there are orders beyond 2nd order
I really like how you explain everything, but I still have a little confuse on the overall reaction order. Can you explain the part were you identified if it is a zeroth-order, first-order and second-order? I would appreciated very much.
Considering the information about reaction orders discussed in the video, how would you determine the reaction order for a reaction involving multiple reactants?
How does changing the concentration of reactants in a chemical reaction impact the determination of the rate law order, and what role do experimental methods play in determining the order of reaction?
What are the practical implications of identifying a reaction as zero-order in industrial processes?
How can analyzing experimental data and reaction graphs help determine the order of a chemical reaction, and why is it important to understand the distinction between zeroth, first, and second-order reactions in practical applications like industrial processes or environmental studies?
I understood that the decomposition of ammonia is a zeroth-order reaction because the rate remains constant regardless of concentration changes. But how do we determine the reaction order for more complex reactions with multiple reactants?
@user-up8se8yf7s
Yes, a reaction can have a zero order with respect to one reactant while having a non-zero order with respect to another reactant. This situation arises in complex reaction mechanisms where the reaction rate is determined by the slowest step, which may involve different reactants.
How does temperature influence the rate constant k in zeroth-order reactions, and would the reaction order change at different temperatures?
Temperature affects the rate constant k even in zero-order reactions because kk depends on the activation energy and temperature according to the Arrhenius equation. However, the reaction order generally does not change with temperature, since it is determined by the reaction mechanism.
this guy just saved my midterm !!!!!!!
This was incredibly helpful. Thank you so much!
Doesn't a second order straight line have a positive slope? 1/[A] = kt + 1/[A]( from integrated rate law) where 1/[A] is on the Y axis and a a slope = +k?
I also think that second order would have a positive slope.
When we compare first-order and zero-order reaction graphics for the disappearance of reactant A with time, at which times during the reaction would you have trouble distinguishing a zero-order reaction from a first-order reaction? Thanks for your awesome tutorials. You explain every detail in an easy way to digest. This is the way! :)
When time is closed to zero.
To distinguish between zero-order and first-order kinetics, you need to conduct experiments and analyze how the concentration changes with time. Zero-order reactions show a linear decrease in concentration, while first-order reactions display exponential decay. So, conducting experiments and examining the reaction rate with respect to concentration is the most effective way to determine the reaction order.
How does the use of a catalyst affect the analysis of reaction order using experimental data? Would the concentration vs. time plot be modified?
How does the rate of reaction change over time for a zeroth-order reaction compared to a first and second-order reaction, as described in the integrated rate laws for each reaction order?
How is the rate law for a zero-order reaction written? What are the units of the rate constant for a zero-order reaction?
Can the method of initial rates be used to determine the reaction order for reactions with multiple reactants? If so, how does it work?
Yes, the initial velocity method can be applied with multiple reagents. The concentration of one reagent is varied while keeping the concentration of the other reagents constant, and the change in velocity allows the order to be determined with respect to the reagent being analyzed. This is repeated for each reagent.
Thank god you did this , exam in two weeks
This video is really helpful 🙌🙌 Thank you so much 🌟🙌
Amazing job!!! Went into Chem lecture confident, left confused as fuck!! But after watching this simplified version the basics help make total sense of whats to come. Thank you bro!!!
When one has more than two reactions orders, how does one establish who goes first in the rate order, how does one add up both rates and how does one establish the graph of two reactions?
Does the atmospheric pressure influence the rate of reaction? If so, how do the changes in atmospheric pressure influence the different orders of reaction?
Question: when filling out the spreadsheet-like table what is the best way to know which order it is going to, I'm not quite clear on that step.
In a reaction, if changing the amount of one reactant doesn't affect the speed, but tripling another reactant makes the speed increase nine times, what is the order of the reaction for each reactant?
I think the straight slope for the 2nd order reactions must be increasing with time since it inverse of the concentration
what are the key steps involved in determining the rate constant and overall reaction order from experimental data?
Thank you! I have a question:
We know that in a zeroth-order reaction, we can change the concentration, and the rate stays the same, but what happens if we change the temperature?
Greetings! I was wondering if there are any exceptions where the concentration does not have a direct relation to the rate, specifically, that I should watch out for?
How does the half-life of a reaction change with concentration for zeroth-order, first-order, and second-order reactions?
How would the graph of concentration vs time differ between a zeroth-order reaction and a first-order reaction?
That was very helpful! Thank you!
at 6:35, [A] is doubling, if it was 2nd order, shouldn't the rate quadruple (3 *4 = 12) instead of square?
Rate = [A]^2 should become
Rate = [x2]^2 = x4 the Rate?
Absolutely amazing! thank you so much, this was so helpful :)
How does the order of a reaction in the rate law relate to the molecularity of the reaction, and can this affect the overall calculations of the rate equation? And what if the "m" or exponent a negative number?
Upon doing some research it seems that the order of the reaction matches the molecularity of the reaction alot of reactions involving two reactant molecules typically has a second-order rate law. As of if "m" is negative, it seems that it indicates that the rate of the reaction decreases as the concentration of that particular reactant increases.
This helped me understand my lab, we did the crystal violent thing I have no idea what we did I did my lab report with general things like when x=0 and 1 it'll be decreasing, and only when x=2 it'll increase, for the second trial I got a bit of a curve and I put that I there must have been inaccuracies when I did the lab, not entirely sure what it meant but I do understand it a bit better after the video I'll re watch this when editing my lab since it's not due for another 2 days
If one were to be utilizing a method of collecting the data of a reaction, like spectroscopy for example, could the data collected of the emission or absorption be thus put in place of the concentration in the table and graph from there?
What methods can I employ to confirm the accuracy of the data I've collected for analyzing the rate of a reaction in an experiment?
For second order, double concentration rate would increase by a factor of 4.
Excellent video, I have a question.
How do changes in temperature and concentration of reactants influence the rate of a reaction? And with respect to the spectrophotometric analysis, is the absorbance equal to what the concentration has been? thank you
How would the method of initial rates be used to determine the order of a reaction if more than four reactants are involved?
What does a straight line on the concentration vs. concentration time graph indicate?
just amazing explanation thank you
So the R=k[A]^1[B]^1 --- so the overall order is 2. and k= .3(1/m^1*s)
I have doubt about a specific section, would a reaction whose overall rate is second-order behave similarly to a simple second-order reaction?
Does every straight line on a slope automatically determine what type of order it is? Either zeroth, first or second
Would individual reactants affect the rate law of a chemical reactant?
thanks alot Mr Andrewson :***
*Anderson
Isn't the reaction to the "zeroth" power suppose to be a straight line because (k) is a constant for that specific reaction and the first order is the one that makes a diagonal line
?
never mind its the [] to the time graph not a rate to time graph my bad xd
Is the a physics series ? Your videos are always awesome and very informative! Keep up the great work :-D
Bro it's chemistry 🗿
you da man mr A