Depending on the Filter characteristics and subwoofer it can be useful to flatten the response. For example you make a compromise in enclosure building that it maybe is strong below 30hz and works okay up to 100hz but there is a dip in between yet the enclosure might be a lot smaller made like this depending on many factors and if that filter boosts this area and the sub can handle the power it is very very useful to make the Response flat. Same goes for any other filter. If the speaker can handle a boost there is no problem using it.
You seriously just helped me understand crossovers for the first time after 3 years of messing with my equalizer in my kenwood. I can not believe I just now understood the fact that the drop off being a sudden drop off for me is better than a slow drop off. Thank you so much seriously.
Thank you for explaining the x’over…. It literally saved my tweeters in my pillars. I could barely turn up the radio without them cracking, but once you explained the x’over it changed everything!!! So much better
Everyone here is asking how to tune their graphic EQ's. Good question! Since I have many years experience tuning medium and larger scale PA systems professionally, I thought I'd offer some friendly help: You can do this! It's all about using your ears. A very simple way to start is to set your graphic flat and put on your favorite music, semi-loud. Turn up each freq, one by one, and listen to the difference it makes. If that freq hurts your ears or distorts the speakers, turn it down until it doesn't. If you like a freq and want to hear it more, turn it up a bit. Repeat across the band. It should sort of look like waves, but probably nothing too extreme plus or minus. And despite what you've seen others do, a smiley face is probably NOT going to sound best. Basically, you should be able to get it very loud, without distortion, AND without hurting your ears. It should also sound balanced across the freq spectrum (low to high). Make sure you can hear the bass, vocals (mids), and highs.... and all of the instruments in the song. Only after all of that is done, if you really want more bass.... turn up the bass. There are more professional tools and methods out there for sure, but this is the basic method every pro audio engineer refers to in a pinch. You might find you enjoy it, and you will be training your ears at the same time. Happy tuning!
Also, if you still want more bass after all of that, use subtractive eq. Subtractive eq can come in handy if for all frequencies but in our case, it usually means “adding” even more bass. We do this by leaving the bass levels the same (after eq’ing everything) and turn down all of the other frequencies in unison. This creates more perceptive bass in relation to the other frequencies. It should add some volume headroom as well.
Thanks for the great tip. I am struggling with the Sound Effect part 1:05. I have played with it so much I can't figure out the best setting anymore. Should I turn them all off and just try your equalizer adjustment method?
@@snowwalker9999 I tried all of the 'sound effect' settings offered on the unit for kicks. In the end, I left them all off and just set the graphic EQ. They were fun to play with, but were more ear candy than useful. Although it is impressive technology, they tend to create an unnatural sound using complex algorithms and digital filters. Note that no professional recording studio is going to use these types of artificial processing, so why should we? I say stick with the graphic, you'll have more fun tuning, and get better results across all recordings. Cheers
Fantastic explanation of the features, helps me understand what I can change to get just that "perfect" sound... and way to go Kenwood... 10000% better stereo head unit than the Sony I bought first and returned... audio settings on the Sony were about 2.5% of the options on the Kenwood. My unit is the Kenwood DMX7706S. The Sony was the XAV-AX210SXM. Love the Kenwood - the Sony made me feel unsafe to drive, the interface was so bad with Android Auto.
@2:06 "Drive Equalizer" DOES NOT eliminate road noise, that's impossible from a head units position. However, like the name a implies, it will "Compensate" by adjusting it sound for the effects of road noise, determined by your volume level. The next generation version (Drive Equalizer+) does this by determining the actual car speed, by using GPS.
Thank you. Just what I needed with my brand new DMX8019DABS installed in a 31 year old Land Rover One Ten which has the acoustic properties of a sewer combined with an international airport on a windy day with someone using a hair dryer, someone else banging a drum and several others making random noises.
Ive learned so much from this video. I just got the Dmx709s. Only thing im still having trouble with is getting the vocals to come as clear as the rest. I listen to hard rock/metal and the music always trumps the vocals. I can't get them equal. Any advice?
Thank you for this video. I have a Kenwood and the manual stinks. I was able to adjust my head unit with a much better understanding after this video. Thanks
I have been searching high and low trying to find a straight answer about the Sub Level mentioned @13:30. How does this effect RCA voltage? If the RCAs are clean all the way up, Do you get your full 4v with sub level at 0, or all the way up? the exact radio i have is a DDX375bt and I watched you guys specific video about and didn't see anything there either. Kenwood is shooting themselves in the foot giving these radios this level of function and not clearly mapping exactly how it works.
This was helpful in explaining the features of the radio. I have a question though. Can you help me understand how bass and treble relate to the EQ at the different frequencies? Generally, on a stock radio I do 10/10 bass and 8/10 on treble. I'm trying to figure out how to set the EQ to where I can achieve more boom bass from the speakers AND a clear volume for vocals. Any help would be appreciated.
Jonathan Gamber get better speakers. Cranking up the EQ is just going to cause distortion at high volume levels. But to answer your question, bass and treble settings are exactly the same as the EQ in this video, except you can only adjust 2 frequencies instead of 13. Typically bass is centred at 100Hz and treble is 1000Hz.
Another great and helpful video. In my 2011 GC I just set the dnx893 to no bass boost, loudness low, no drive eq yet, no space enhancer, realizer off and sound stage to middle. I did have bass boost at 1 and loudness off but at low volumes it was thin. EQ is Rock
Rob Figenbaum yeah not a fan of bass boost, I have the 9903 settings on the shelf waiting to go in. It is driving me crazy I can't wait to play with it.
Great video! If you are trying to grow your channel though I would recommend writing a script, it may seem silly but it will greatly enhance your production quality
This answered a bunch of questions, as I have this unit and am just familiarizing myself with it. Can you tell me what to look for if, when hooked to Apple carplay, I can barely hear people who call me even when phone volume is all the way up? Thanks in advance.
I had a ddx9907xr kenwood installed in my c6 corvette which had bose premium navigation system. When I had the factory radio installed i had my treb at 5 mid a 3 and bass at 3 from a 0-5 setting on each. I don't know what to set this radio at to have it sound good? Still has factory bose speakers and tweets in it. I don't know the frequency they are to set a cross over or even where I should put the equ to sound as I had it to the factory radio. Get really distorted above volume 28. Could you help me where to set the eq?
Do these settings all function as intended if I'm using the factory amp/processor with a Maestro RR? Vehicle is a 2021 Grand Cherokee with the 10 speaker Alpine system.
Should a tweeter be selected for the rear speakers if it is a coaxial speakers or should it only be used with component speakers in the speaker select??
Thanks for the video. I have the DMX907S. I'm wondering if this HU uses crossovers by default? I thought I was utilizing only my amp settings, but watching this video made me wonder if I might not be getting what I think; especially if I select the car type, speaker position and size, etc. I assume from that information, Kenwood is choosing crossover parameters, gain, etc vs me explicitly setting the crossover values using the X'OVER button? If by default the Excelon is applying crossover values, how do I turn it off? By setting car type to none? Or am I misunderstanding?
Idk if you still answer questions here but I have one. I have an 06 pathfinder with the Bose system. Kenwood ddx9703s. Since it used factory amplifier and speakers I have it hooked up via RCAs. The harness only provided me 4 RCAs which I hooked up to front and rear. Included in the rear channels is the rear speakers and the factory subwoofer It's a long shot but is there anyway to adjust the sub settings? Also a 2nd question. I have a problem with blueooth calling/microphone. People I talk to complain they cant hear me or can barely understand me because the sound quality is so poor. I tried adjusting noise cancellation and those microphone settings with no help Is it a bad mic? Or Is there anything else I can adjust on the unit? I hate to have to take it all apart to replace a faulty mic if it turns out to be simple setting fix. Hope u get this. Thanks so much in advance
You guys are awsome! Please show me how to do a first time Garmin maps update on the Kenwood DNR1007XR. I can't get the ID code transferred to my SD card. Garmin NAV instructions don't work.
Thanks for the great video. I have a question I have the DNX693s installed in my 2011 Jeep Grand Cherokee and left the factory amp in. The problem is I hear white noise or hiss on all my speakers more so in the rear how can I eliminate it? Thanks Steven
Steven Ross well that is a great interface. At this point you have 2 choices. 1 live with it or 2 replace the factory amp with something better. Unfortunately interfacing with factory is not always perfect.
Five Star Car Stereo I agree with you I think I will replace it with the Kenwood eXcelon XR600-6DSP when it comes out in a couple of weeks that's the was to go it think unless you have a better idea.
Steven Ross that amp would be over kill if you are running a 693. The radio already has all DSP features built in. I would just get the XR900-5 and be done.
Will the new Excelon Reference series memorize the settings so in case of power failure.... you don't have to go through all of this over again? I am specifically looking at the DNX995S.
This is a great Radio I love it but I can't get the phone calls to come through loud enough to hear I've tried everything I just can't get my call volume to be loud and the volume is up as high as it can go. Any suggestions
I was thinking of purchasing an separate DSP to go with the kenwood 893s. To achieve a good or awesome sound in my car will the DSP built in the 893 be enough or can I still ad a DSP?
I agree with you! I don't have this model kenwood stereo but I have one just like it. Had it for well over 6months and I still haven't worked everything out on it, I've given up on a few of them because it blew 2 of speakers up. Great unit but they could have made it easier to use
Yeah I bought a used truck that was already equipped with this by the previous owner, and my music sounds like straight up garbage. I’ve spent hours tinkering with it and I’m never satisfied with it. Kinda wish the previous owner just never upgraded the infotainment system lol
I have a Kenwood DDX396. I wired my after market speakers to my after market amp. I have the wiring harness from my Kenwood wired to the factory harness. I have a 12" sub wired to an amp. When i turned it on i get a Miswiring DC Offset Error/Warning Offset Error. I checked the wires they look ok. Any tips that can help? Also Congratulations on installer of the year. FISH
Yes leave them because the stereo don’t filter all of them also when you turn on the car the amp can clip and damage your tweeters so it’s extra protection
i have the dmx905s and a rockford p1000x5 im getting way to much bass and it spikes on the higher bass freqs like its way louder than other sounds. the only thing i have found to help is to turn the gain down on the head unit in the xover settings but everyone says pick one the amp or the unit for hpf and lpf but my sub i can only do on the amp because i cant turn the lpf off??
@FiveStarCarStereoInc BTW I love the video and always do i love car audio and you've taught me more then many others but serious questions please answer if you can/have time as ive been trying to figure some of this out for a while i find a few things weird/funny first you showed a gain setting in the crossover area for subwoofer and then i see another gain control or subwoofer level in general equalization area one i believe goes down to -10 in crossover area then again the equalization area it has subwoofer level n that goes i believe from -10 to plus 10 i dont understand why 2?just for pure ease? different controls for the subwoofer output Secondly i had the Pioneer Premier Deh-860mp and it was the first color screen cd/mp3 player it was amazing it had a setting on the outside for output it had an active settings so your output went from front rear sub to high mid low i feel very ahead of its time also it had 13 band eq and digital time alignment and self eq as well you took your vehicle to a quite location and plug in the provided microphone and it would exactly time alignment exactly to where your head sat i would always turn my subwoofers off as that didn't work it would just clip the microphone but why dont they use this technology now with better microphones instead they got these dsp which are amazing but not only do you have to have a great understanding of how it works and how each car is completely different when it comes to tuning these and as well you need nice microphones or at least one to help it spund good which most dont have even the better locations around the country do not have the things you do nor do they have enough knowledge like you guys do they unfortunately are in it o ly to get momey in there pocket not necessarily to make there customers walk away like wow those guys know an extreamly high amount of knowledge compared to the other shop i went to i wish more shops where like you but i truely would like a teply on why not use the technology
So what setting on the graphic equaliser is treble? On some songs I can’t hear the voices very much and no matter how I mess with the bass I can’t hear the voices well
On the POSTION/DTA now for the inside speakers I set the adjustments right but for the subwoofer am I post to set the feet/distance of the subwoofer too?? Please let me know wzup ASAP
So you set the speakers to "All Position" then you measure from the center of ur head in front of the steering position in feet for all speakers... BUT you HAVE to set the subwoofer to 0FT?! Kind of makes no sense as it's definitely not at 0FT from me, and why would they let you change this value if it's wrong to do it?!
PanzerIV you adjust each speaker except for the one that is furtherest away. The sub is normally the furtherest away. Therefore any speaker that is closer will be changed (by adding delay to the signal for those closer speakers), such that the sound from each speaker will arrive at your listening position at the same time.
Million thanks 🙏... I did not know Ken wood has such a lot of features... I thought pioneer was the lion king 😁 Kindly advise which specific after-market radio will give me very low sub frequencies of 25Hz (air bass) without distortion. Am not into apple/ android auto connect features or cameras... am more interested in sound quality . Thanks again Sir.
Hi Guys, thanks for your very instructive videos about Audio, (the little I know about Head units I learned from you) I hope you can help me: Best Buy isntalled a Kenwwood DMX7706S for me, i connected my Iphone X with Apple Play and when I'm on the phone the sound only comes through the subwoofer which means I have to disconnect my Phone from the unit and use Speaker phone. I already selected Front speakers in Phone settings but did not help at all, Do you have any suggestions that my help me with this problem? Freddy Thanks you from the Bronx, NY.
I’ve found lowering the 160 and 100 frequencies helped a lot. Keeping the 62.5 up keeps the “thud” of the bass drum and reducing 100 and 160 really tamed the extra boominess. Once your bass is tamed, you should be able to just turn up the volume to hear vocals clearer. If not, start adjusting other frequencies (630-6.3k) one at a time until you hear a difference. 10k and 16k is where a lot of that high-end “sparkle” lives. Adjusting those frequencies can make a big overall difference in sound too. Adjust those to your liking one-by-one until it sounds how you want it. There’s no other way to learn how to EQ but once you know how, you’ll never forget and you’ll be adjusting all of your friends car radios too.
Im being offered this 9904s unit for a decent price and thinking of swapping it out for my pioneer avh x4800bs. Is it worth it or is the pioneer better? Im attracted to the kenwood for the better screen, higher 5v preout, and more sound setting options
I have a kenwood excelon dmx 706s with 4 infinity kappa 62IX power by Kenwood XR401-4 channel amp and doesn’t sound as clear i was expected like too much bass over clarity. How should i tune up my amp? Should I use the x’over before tuning the amp or after? I’m all confused 🫤 If anyone will anser my complicated question, I just want to say thank you!
@@ryanwilson5936 no, I tried everything and nothing worked lol. When I had the cheap Sound Ordnance M75-4 from crutchfield, the sound was so crisp. I think ill do the switch back whenever I will have the time.
@@andrect7030 “Whenever I will have the time”….. man, I feel you there. I actually have 4 of the same exact Kappas still new in the box I bought over a year ago just waiting on me. Everything is hooked up but those. I even have the speaker cable ran from their amp. Something about removing a bunch of door panels makes the rest of life a much higher priority. And, I live in Michigan and winter is coming… It may become a 2023 spring project.
I have a kenwood DDX23BT end a iPhone when I play the Bluetooth end I increase the volume at 28 gos back to 15 doesn’t let me go over do you know how to fix it Gracias
ok so I bought the DNX 7705S and neither the front two tweets nor the subwoofer work! I drive an 07' Element that came with factory tweets, sub, and 4 door speakers (two in the front door and the other 2 in the back two doors). I replace the 4 door speakers with kicker red speakers (and they sound AMAZING) however, no sound at all comes from my tweeters nor the sub (all 3 of which are still the factory speakers). Help!!
Got the same unit. Everything is ok bluetooth quality is not super great is not hd or super clear. Any ideas to which unit i need to upgrade to for a better bluetooth sound. Thank You
Can you tell me which stereo will gives you best musical experience Alpine or Kenwood. Since the tuning level of kenwood matches the alpine. Please suggest me a best stereo which give us more audio clarity and good experience.
![[AES 2024] 웰메이드 소스기기의 향이 난다! 오디오엑스포서울 2024 다시보기](http://i.ytimg.com/vi/7sdV78Sx9wA/mqdefault.jpg)
You don't know how much I love you for saying let's go over bass boost don't use it. Truer words were never spoken!
Great video. As soon as you said “bass boost: don’t use it” I knew you were legit.
Depending on the Filter characteristics and subwoofer it can be useful to flatten the response. For example you make a compromise in enclosure building that it maybe is strong below 30hz and works okay up to 100hz but there is a dip in between yet the enclosure might be a lot smaller made like this depending on many factors and if that filter boosts this area and the sub can handle the power it is very very useful to make the Response flat. Same goes for any other filter. If the speaker can handle a boost there is no problem using it.
You seriously just helped me understand crossovers for the first time after 3 years of messing with my equalizer in my kenwood. I can not believe I just now understood the fact that the drop off being a sudden drop off for me is better than a slow drop off. Thank you so much seriously.
Thank you for explaining the x’over…. It literally saved my tweeters in my pillars. I could barely turn up the radio without them cracking, but once you explained the x’over it changed everything!!! So much better
Everyone here is asking how to tune their graphic EQ's. Good question! Since I have many years experience tuning medium and larger scale PA systems professionally, I thought I'd offer some friendly help:
You can do this! It's all about using your ears. A very simple way to start is to set your graphic flat and put on your favorite music, semi-loud. Turn up each freq, one by one, and listen to the difference it makes. If that freq hurts your ears or distorts the speakers, turn it down until it doesn't. If you like a freq and want to hear it more, turn it up a bit. Repeat across the band. It should sort of look like waves, but probably nothing too extreme plus or minus. And despite what you've seen others do, a smiley face is probably NOT going to sound best. Basically, you should be able to get it very loud, without distortion, AND without hurting your ears. It should also sound balanced across the freq spectrum (low to high). Make sure you can hear the bass, vocals (mids), and highs.... and all of the instruments in the song. Only after all of that is done, if you really want more bass.... turn up the bass.
There are more professional tools and methods out there for sure, but this is the basic method every pro audio engineer refers to in a pinch. You might find you enjoy it, and you will be training your ears at the same time. Happy tuning!
In a few words: you are such a good and cool person, Sr.
@@marcob.9969 Hey, Thanks Marco!!
Also, if you still want more bass after all of that, use subtractive eq. Subtractive eq can come in handy if for all frequencies but in our case, it usually means “adding” even more bass. We do this by leaving the bass levels the same (after eq’ing everything) and turn down all of the other frequencies in unison. This creates more perceptive bass in relation to the other frequencies. It should add some volume headroom as well.
Thanks for the great tip. I am struggling with the Sound Effect part 1:05. I have played with it so much I can't figure out the best setting anymore. Should I turn them all off and just try your equalizer adjustment method?
@@snowwalker9999 I tried all of the 'sound effect' settings offered on the unit for kicks. In the end, I left them all off and just set the graphic EQ. They were fun to play with, but were more ear candy than useful. Although it is impressive technology, they tend to create an unnatural sound using complex algorithms and digital filters. Note that no professional recording studio is going to use these types of artificial processing, so why should we? I say stick with the graphic, you'll have more fun tuning, and get better results across all recordings. Cheers
I have a single din Excelon without this display. This helped me understand what is actually going on much clearer. Thanks
You guys have the Best in depth videos on youtube, A+
Fantastic explanation of the features, helps me understand what I can change to get just that "perfect" sound... and way to go Kenwood... 10000% better stereo head unit than the Sony I bought first and returned... audio settings on the Sony were about 2.5% of the options on the Kenwood. My unit is the Kenwood DMX7706S. The Sony was the XAV-AX210SXM. Love the Kenwood - the Sony made me feel unsafe to drive, the interface was so bad with Android Auto.
This is old and I’m bringing it back up. AWESOME JOB ON THIS VIDEO
@2:06 "Drive Equalizer" DOES NOT eliminate road noise, that's impossible from a head units position.
However, like the name a
implies, it will "Compensate" by adjusting it sound for the effects of road noise, determined by your volume level. The next generation version (Drive Equalizer+) does this by determining the actual car speed, by using GPS.
Thank you for the video. My favorite part: “of course we have 15s” lol
Thank you.
Just what I needed with my brand new DMX8019DABS installed in a 31 year old Land Rover One Ten which has the acoustic properties of a sewer combined with an international airport on a windy day with someone using a hair dryer, someone else banging a drum and several others making random noises.
Exactly the info I was looking for to help me tune my deck and set it up better, appreciate the video guys!
Surprisingly still relevant
Just installed the kenwood dmx809s. This is perfect. Thank you
I'm seriously so impressed with this channel. Thanks for helping me understand my stereo. Subscribed!
Just installed the kenwood ddx99704s into my Honda element. This has helped me greatly!
I have this unit in my car and the hd tuner isnt picking up stations well. How has yours been
The HD RADIO HAS BEEN ok in my area
Guys great video just purchased this unit and finally was able to property set all sounds.
Thank you very much for all of the different videos highlighting all the different features
I’ve had my kenwood installed for about 3 weeks but the sound just wasn’t right. After watching this I got it PERFECT. THANKS SOOO MUCH
that voice crack at 9:24 hahaha. great video nonetheless
Omg!!!!!!!thanks sooooo much...very helpful...I now understand the Xover settings...
Great Video, now i know what is the Slope function at Xover.
Ive learned so much from this video. I just got the Dmx709s. Only thing im still having trouble with is getting the vocals to come as clear as the rest. I listen to hard rock/metal and the music always trumps the vocals. I can't get them equal. Any advice?
Thank you for this video. I have a Kenwood and the manual stinks. I was able to adjust my head unit with a much better understanding after this video. Thanks
I learned so much watching this!!!!
I just bought the dmx1037s and this tutorial is perfect !
I have been searching high and low trying to find a straight answer about the Sub Level mentioned @13:30. How does this effect RCA voltage? If the RCAs are clean all the way up, Do you get your full 4v with sub level at 0, or all the way up? the exact radio i have is a DDX375bt and I watched you guys specific video about and didn't see anything there either. Kenwood is shooting themselves in the foot giving these radios this level of function and not clearly mapping exactly how it works.
This was helpful in explaining the features of the radio. I have a question though. Can you help me understand how bass and treble relate to the EQ at the different frequencies? Generally, on a stock radio I do 10/10 bass and 8/10 on treble. I'm trying to figure out how to set the EQ to where I can achieve more boom bass from the speakers AND a clear volume for vocals. Any help would be appreciated.
Jonathan Gamber get better speakers. Cranking up the EQ is just going to cause distortion at high volume levels. But to answer your question, bass and treble settings are exactly the same as the EQ in this video, except you can only adjust 2 frequencies instead of 13. Typically bass is centred at 100Hz and treble is 1000Hz.
Another great and helpful video. In my 2011 GC I just set
the dnx893 to no bass boost, loudness low, no drive eq yet, no space enhancer,
realizer off and sound stage to middle. I did have bass boost at 1 and loudness
off but at low volumes it was thin. EQ is Rock
Rob Figenbaum yeah not a fan of bass boost, I have the 9903 settings on the shelf waiting to go in. It is driving me crazy I can't wait to play with it.
Great video. I have this in a slingshot so this is very helpful.
This is so helpful thank you. I do wish the audio installer had fix all these settings for me.
You can. Go to a top rated shop and they'll charge you but it's worth it.
Search my name in the comments for a guide to setup the graphic EQ.
Very informative! Please do more videos like this.
Greetings from Malaysia!
maman89 hey there, thank you very much and thank you for letting us know where you are from, super cool.
Any way you can go more into detail on how and when to use the 2 way vs 3 way option for the X over on the excelon DMX706S
How can you tune the c6 Corvette when It has 10in speakers in the lower front, tweeters in the upper front door and the rears have 5.25 in the ?
Great video! If you are trying to grow your channel though I would recommend writing a script, it may seem silly but it will greatly enhance your production quality
I would love to get a sound system installed with you guys.
Question is the crossover setting necessary if I am running 2 amps (one sub and one to 6x9s) and the amp filters are set to how I want it?
are all the settings lost if the battery is disconnected or can it somehow save all the crossover points and etc.
Depends on model
Mine reset itself after the car audio place set the system perfectly. Now im sitting here watching tube videos trying to fix it back lol
just bought the same unit , need to go to college , ill figure it out in 4 years LMMFAO WTF!!!!!!!!!!!!!
So the speaker level adjustment has no positive db adjustment. Just lowering it?
This answered a bunch of questions, as I have this unit and am just familiarizing myself with it. Can you tell me what to look for if, when hooked to Apple carplay, I can barely hear people who call me even when phone volume is all the way up? Thanks in advance.
You guys are great😊
does the s/w level adjust voltage to just that channel? or what does it do?
thanks in advance!
larry
It increases your rca voltage
I had a ddx9907xr kenwood installed in my c6 corvette which had bose premium navigation system. When I had the factory radio installed i had my treb at 5 mid a 3 and bass at 3 from a 0-5 setting on each. I don't know what to set this radio at to have it sound good? Still has factory bose speakers and tweets in it. I don't know the frequency they are to set a cross over or even where I should put the equ to sound as I had it to the factory radio. Get really distorted above volume 28. Could you help me where to set the eq?
When setting the crossover for each set of speakers do i put in the setting from the specs the speaker manufacturer gives for that speaker?
What headunit model did u use in this video please I'm interested in getting 1
Do these settings all function as intended if I'm using the factory amp/processor with a Maestro RR? Vehicle is a 2021 Grand Cherokee with the 10 speaker Alpine system.
I needed this. Thank you
Should a tweeter be selected for the rear speakers if it is a coaxial speakers or should it only be used with component speakers in the speaker select??
Wish it allowed you to choose components for the rears
Thanks for the video. I have the DMX907S. I'm wondering if this HU uses crossovers by default? I thought I was utilizing only my amp settings, but watching this video made me wonder if I might not be getting what I think; especially if I select the car type, speaker position and size, etc. I assume from that information, Kenwood is choosing crossover parameters, gain, etc vs me explicitly setting the crossover values using the X'OVER button? If by default the Excelon is applying crossover values, how do I turn it off? By setting car type to none? Or am I misunderstanding?
What would we select for a single cab truck? SUV or Wagon? I have two front speakers and two year speakers only. No subs
Vote for Pedro hahaha! Way to go again guys! Rock on 😎
Idk if you still answer questions here but I have one. I have an 06 pathfinder with the Bose system. Kenwood ddx9703s.
Since it used factory amplifier and speakers I have it hooked up via RCAs.
The harness only provided me 4 RCAs which I hooked up to front and rear.
Included in the rear channels is the rear speakers and the factory subwoofer
It's a long shot but is there anyway to adjust the sub settings?
Also a 2nd question. I have a problem with blueooth calling/microphone.
People I talk to complain they cant hear me or can barely understand me because the sound quality is so poor.
I tried adjusting noise cancellation and those microphone settings with no help
Is it a bad mic? Or Is there anything else I can adjust on the unit?
I hate to have to take it all apart to replace a faulty mic if it turns out to be simple setting fix.
Hope u get this. Thanks so much in advance
You skipped “Bass EXT” on the EQ . What exactly does it do and do I need to have it on when I set my amp gain?
Bass ext keeps the gain under 62.5hz the same as 62.5hz, if you turn it off frequencies under 62.5hz are just lowered
Thank you for the useful info my friends.
You guys are awsome! Please show me how to do a first time Garmin maps update on the Kenwood DNR1007XR. I can't get the ID code transferred to my SD card. Garmin NAV instructions don't work.
Thanks for the great video. I have a question I have the DNX693s installed in my 2011 Jeep Grand Cherokee and left the factory amp in. The problem is I hear white noise or hiss on all my speakers more so in the rear how can I eliminate it? Thanks Steven
Steven Ross what interface did you use?
Five Star Car Stereo I use the Meastro RR
Steven Ross well that is a great interface. At this point you have 2 choices. 1 live with it or 2 replace the factory amp with something better. Unfortunately interfacing with factory is not always perfect.
Five Star Car Stereo I agree with you I think I will replace it with the Kenwood eXcelon XR600-6DSP when it comes out in a couple of weeks that's the was to go it think unless you have a better idea.
Steven Ross that amp would be over kill if you are running a 693. The radio already has all DSP features built in. I would just get the XR900-5 and be done.
I've got a dmx4707s can't seem to get sound from rear speakers on Bluetooth. How do you change that setting?
Will the new Excelon Reference series memorize the settings so in case of power failure.... you don't have to go through all of this over again? I am specifically looking at the DNX995S.
This is a great Radio I love it but I can't get the phone calls to come through loud enough to hear I've tried everything I just can't get my call volume to be loud and the volume is up as high as it can go. Any suggestions
do you have video for Kenwood dnx577s Controlling Audio send me link plz
Does 'through' use the amp/subwoofer crossover instead?
Yes
Big help. Thanks very much I learned a lot
Great vid. Learned a lot
I was thinking of purchasing an separate DSP to go with the kenwood 893s. To achieve a good or awesome sound in my car will the DSP built in the 893 be enough or can I still ad a DSP?
+Marshall Timmons the Kenwood is a pretty amazing DSP. If you want more you can definitely add something else
I'm OCD I'd spend 4 years tinkering with it before I ever enjoyed it
I agree with you! I don't have this model kenwood stereo but I have one just like it. Had it for well over 6months and I still haven't worked everything out on it, I've given up on a few of them because it blew 2 of speakers up. Great unit but they could have made it easier to use
Yeah I bought a used truck that was already equipped with this by the previous owner, and my music sounds like straight up garbage. I’ve spent hours tinkering with it and I’m never satisfied with it. Kinda wish the previous owner just never upgraded the infotainment system lol
I have a Kenwood DDX396. I wired my after market speakers to my after market amp. I have the wiring harness from my Kenwood wired to the factory harness. I have a 12" sub wired to an amp. When i turned it on i get a Miswiring DC Offset Error/Warning Offset Error. I checked the wires they look ok. Any tips that can help? Also Congratulations on installer of the year. FISH
Can I use the X-over if my car unit doesn't have external amplifiers and subwoofer connected, and it's driving the factory speakers?
Under OEM setup there is options for amp gain and speed control. What do these do?
when setting x over on deck do i leave cross overs on amp alone i did set x overs on amp when i installed
Yes leave them because the stereo don’t filter all of them also when you turn on the car the amp can clip and damage your tweeters so it’s extra protection
i have the dmx905s and a rockford p1000x5 im getting way to much bass and it spikes on the higher bass freqs like its way louder than other sounds. the only thing i have found to help is to turn the gain down on the head unit in the xover settings but everyone says pick one the amp or the unit for hpf and lpf but my sub i can only do on the amp because i cant turn the lpf off??
@FiveStarCarStereoInc BTW I love the video and always do i love car audio and you've taught me more then many others but serious questions please answer if you can/have time as ive been trying to figure some of this out for a while i find a few things weird/funny first you showed a gain setting in the crossover area for subwoofer and then i see another gain control or subwoofer level in general equalization area one i believe goes down to -10 in crossover area then again the equalization area it has subwoofer level n that goes i believe from -10 to plus 10 i dont understand why 2?just for pure ease? different controls for the subwoofer output
Secondly i had the Pioneer Premier Deh-860mp and it was the first color screen cd/mp3 player it was amazing it had a setting on the outside for output it had an active settings so your output went from front rear sub to high mid low i feel very ahead of its time also it had 13 band eq and digital time alignment and self eq as well you took your vehicle to a quite location and plug in the provided microphone and it would exactly time alignment exactly to where your head sat i would always turn my subwoofers off as that didn't work it would just clip the microphone but why dont they use this technology now with better microphones instead they got these dsp which are amazing but not only do you have to have a great understanding of how it works and how each car is completely different when it comes to tuning these and as well you need nice microphones or at least one to help it spund good which most dont have even the better locations around the country do not have the things you do nor do they have enough knowledge like you guys do they unfortunately are in it o ly to get momey in there pocket not necessarily to make there customers walk away like wow those guys know an extreamly high amount of knowledge compared to the other shop i went to i wish more shops where like you but i truely would like a teply on why not use the technology
Hi great video. Need help wiring. Have kenwood dnx 995s and alpine type r with Polk audio pa d1000.1. Have power but no sound. Thanks
So what setting on the graphic equaliser is treble? On some songs I can’t hear the voices very much and no matter how I mess with the bass I can’t hear the voices well
You move the middle section up. Maybe around 100hz-1khz
does the Kenwood DPX304MBT have these sound features?
is there a up and down batton on the head unit
What model kenwood double din is this?
Nice walk through. Thanks!!
Appreciate the vid. Just be careful using some of those other dsp settings and the eq. Those often introduce clipping/distortion.
thornygravy thank you and yes everything in moderation:)
On the POSTION/DTA now for the inside speakers I set the adjustments right but for the subwoofer am I post to set the feet/distance of the subwoofer too?? Please let me know wzup ASAP
Eddie Shellmire you set the speaker that's farthest away from the listening position to 0.
So you set the speakers to "All Position" then you measure from the center of ur head in front of the steering position in feet for all speakers... BUT you HAVE to set the subwoofer to 0FT?! Kind of makes no sense as it's definitely not at 0FT from me, and why would they let you change this value if it's wrong to do it?!
PanzerIV you adjust each speaker except for the one that is furtherest away. The sub is normally the furtherest away. Therefore any speaker that is closer will be changed (by adding delay to the signal for those closer speakers), such that the sound from each speaker will arrive at your listening position at the same time.
Million thanks 🙏... I did not know Ken wood has such a lot of features... I thought pioneer was the lion king 😁
Kindly advise which specific after-market radio will give me very low sub frequencies of 25Hz (air bass) without distortion. Am not into apple/ android auto connect features or cameras... am more interested in sound quality .
Thanks again Sir.
Hi Guys, thanks for your very instructive videos about Audio, (the little I know about Head units I learned from you) I hope you can help me: Best Buy isntalled a Kenwwood DMX7706S for me, i connected my Iphone X with Apple Play and when I'm on the phone the sound only comes through the subwoofer which means I have to disconnect my Phone from the unit and use Speaker phone. I already selected Front speakers in Phone settings but did not help at all, Do you have any suggestions that my help me with this problem? Freddy Thanks you from the Bronx, NY.
How do I set the eq to a level where I increase the vocals and lower the bass
I’ve found lowering the 160 and 100 frequencies helped a lot. Keeping the 62.5 up keeps the “thud” of the bass drum and reducing 100 and 160 really tamed the extra boominess. Once your bass is tamed, you should be able to just turn up the volume to hear vocals clearer. If not, start adjusting other frequencies (630-6.3k) one at a time until you hear a difference. 10k and 16k is where a lot of that high-end “sparkle” lives. Adjusting those frequencies can make a big overall difference in sound too. Adjust those to your liking one-by-one until it sounds how you want it. There’s no other way to learn how to EQ but once you know how, you’ll never forget and you’ll be adjusting all of your friends car radios too.
Im being offered this 9904s unit for a decent price and thinking of swapping it out for my pioneer avh x4800bs. Is it worth it or is the pioneer better? Im attracted to the kenwood for the better screen, higher 5v preout, and more sound setting options
How do I get my KENWOOD to hook up to my car gauges so I can see them through my stereo
I have a kenwood excelon dmx 706s with 4 infinity kappa 62IX power by Kenwood XR401-4 channel amp and doesn’t sound as clear i was expected like too much bass over clarity. How should i tune up my amp? Should I use the x’over before tuning the amp or after? I’m all confused 🫤
If anyone will anser my complicated question, I just want to say thank you!
Did you ever get it sorted out?
@@ryanwilson5936 no, I tried everything and nothing worked lol. When I had the cheap Sound Ordnance M75-4 from crutchfield, the sound was so crisp. I think ill do the switch back whenever I will have the time.
@@andrect7030
“Whenever I will have the time”….. man, I feel you there. I actually have 4 of the same exact Kappas still new in the box I bought over a year ago just waiting on me. Everything is hooked up but those. I even have the speaker cable ran from their amp. Something about removing a bunch of door panels makes the rest of life a much higher priority. And, I live in Michigan and winter is coming… It may become a 2023 spring project.
What's the best car type setting for a Ford Ranger super cab?
not really a valid question. nobody knows what your ears like and nobody knows what products live in you truck :)
I have a kenwood DDX23BT end a iPhone when I play the Bluetooth end I increase the volume at 28 gos back to 15 doesn’t let me go over do you know how to fix it Gracias
ok so I bought the DNX 7705S and neither the front two tweets nor the subwoofer work! I drive an 07' Element that came with factory tweets, sub, and 4 door speakers (two in the front door and the other 2 in the back two doors). I replace the 4 door speakers with kicker red speakers (and they sound AMAZING) however, no sound at all comes from my tweeters nor the sub (all 3 of which are still the factory speakers). Help!!
This device have feature is 2 way to 3 way crossover switching? 🤔
Got the same unit. Everything is ok bluetooth quality is not super great is not hd or super clear. Any ideas to which unit i need to upgrade to for a better bluetooth sound. Thank You
You didn't go threw phase inversion? What is it ?
nice got the older dnx 5150
sweet now if I can figure how to set the radio stations .
Can you tell me which stereo will gives you best musical experience Alpine or Kenwood. Since the tuning level of kenwood matches the alpine. Please suggest me a best stereo which give us more audio clarity and good experience.
Check out the Ddx9903s
hey guys. i was wondering if i can take signal from my radio send it to a crossover then from the crossover to a eq then to an amp
this menu is much more intuitive than their newer models like the ddx396
Does this negate the need for a DSP?
Great vid! Thxxx