@@ForeverSelfEmployed thanks alot bro you're the man lol, do you have a snapchat that you use for these jobs as well that ppl could add you on ? I dont have Instagram or facebook is why I'm asking and it seems like some of these jobs I've seen you do would make cool little videos .
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ruclips.net/user/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
Justin, to your question about the choke, you definitely want to adjust it. Usually Full choke to start it up, then choke completely OFF once it gets going and you're powerwashing. By running it half choke, you're running it rich (extra fuel) and these carbs are tuned to give you a stoichiometric mix when the choke is off. Choke off keeps carbon buildup at a minimum and burns less gas while giving more power. Great video thanks for sharing!
Forever Self Employed I also know these engines well and yes, make sure the choke is completely OFF once the engine is running. If it’s not then you will start to have problems very quickly.
Very good review. I bought this same unit in 1997 and it just laid down on me this year. I'll never own one that doesn't have a honda motor. We had a Simpson at work and that's why I went with it to begin with. It was belt driven and quite a bit more expensive. These are great units and I'm going to Lowe's for my next one. Thanks again.
I just purchased a Simpson 4400PSI/4GPM and brand new out the box it has a bad unloader. It stays in constant high pressure mode and activates pop off valve immediately. I replaced the AAA pump with a Honda AR pump 4400/4gpm and it works fantastic now. Didn’t have time to wait 2 months for the repair shop to fix it.
Jetstream Power Wash ~They were telling me it’s part of the pump. I didn’t and could t wait to find out I got another bad apple. The Honda AR pump has all individual parts. Each part is quick to change saving down time. Overall just a much better pump. I might replace the unloaded on the other one and keep for a back up plan.
I had a Simpson for year's it always started right up the pump died and it was 10 year's old, i just got a mi-t-m at Sherwin Williams 4000 psi 3.5 gallon per minute cold water direct driven i like it because it's on an aluminum frame it's about the same size as the Simpson but it lighter my Simpson was a tank also the Simpson was 2 grand the mi-t-m cost about $900 Sherwin Williams had a Contractor sale they gave me a drill set too If anyone is thinking of pressure washing full time get a commercial grade washer they're worth it in the long run the cheap ones are unreliable but do the best you can with whatever budget you have i mostly paint but i like to have decent equipment and i always wash a house before painting
Great review , I have been looking at it myself. I have been running a simpson 2.5 gpm 3300psi with honda gx200 motor....I know everyone says you need 4gm..but it was in my budget last year and it does excellent for my gets all my homes and driveways clean and made me some nice money. I get about 3.5hrs per tank......keep up the good work and awesome videos
I would recommend airplane fuel. I park my 1987 Electra-Glide every winter with airplane fuel and it starts right up, even with 100,000 miles on it. Use it on my snowblower, weed trimmer, and chainsaws, which are not used very often.
For the everyday home owner it would be a great tool to have but if you are running every day you need to spend $1700 an get a belt drive stay away from AAA pumps get a CAT or GP 4gpm or higher best on the market an what you said about the Honda engines is fact they will outlast any other if maintenance is kept up.
@@Jimmy_Cavallo he's saying that because pumps can be replaced or upgraded. One's pre-installed, like mine, will eventually fail and the only thing I can do is replace the whole machine. That is 600 dollars, whereas a pump will cost you 70 if you go to northern tool. I will eventually buy a pump and downstream. I am still saving to buy a 4.5 gpm machine.
Hey Justin, I saved some money and decided after doing some research to give this a shot. I'm going with a the Simpson Megashot 3200 psi washer, 31 inch extender, surface cleaner to start off. Excited to see where this goes thanks for inspiring others to take a shot at this business, your positive attitude and encouragement has been helpful. Thank you.
You and my brother are the ones that helped me gain the confidence to start my business and the tips I've used from you have made me more money each job and more jobs locally. You are truly a pressure GOD🙏 . Couldn't have done it without and support or little confidence you give to other smaller businesses and handymen.
The internet & RUclips is amazing. My dude hustles 24/7 I love the grind homie. Definitely never thought of this as a side income. Im a retired vet, everyone in my neighborhood has long driveways and 2 car garages. $150-$250 a pop not bad keep hustling
I just bought the 3700 psi pressure washer from lowes too it was 699.00 and it has all the same stuff as the 4000 psi except the 300 extra pressure been using mine alot and its pretty sweet but I just use it around the house for lawn tractors,trucks house ect, been working really good so far got an extra 3 year warranty from blowes ,good luck with yours I guess we will see how long they last lol great video
Please consider using Bestline oil additive, 1-2 ounces per quart(about $1.50 per ounce) on small Honda engines.I have used it with great success for years. I believe it had extended the engine life and lowers running temperatures. I have seen many years of life out of my Honda engines with this and pure synthetic oil. Cheap insurance for an expensive engine. I use only the best oils. (Mobil 1, Pennzoil Platinum, Amzoil, which ever one is on sale and change it often (around 25 hours) Ron A
To be fair.. for paid pressure washing work, cheapest I would go is around the $899 mark on Amazon for the Simpson 4.2GPM. All about the GPM at a certain point.
No comments pertaining to triplex pumps? Thats what your steppin up to with this unit. AAA are ceramic lined pistons. Cat have full ceramic pistons and are worth the extra cash. Plus you guys running units 5-8 hrs a day 5 days a week should go with the belt driven models with Cat triplex pumps.
Been watching your videos and gotta say their pretty cool and informant. Many people are always going to question your methods but I believe in doing what works for you. Keep it up dude and make that money baby.
I got the 3400 psi honda 200 engine. Its great. Tri pump. It will cut through wood if your not careful. 2.7 gal. I love how it works but pressure washing is fun for 3 4 hours.5hen its a job, god bless you. But it is superb. I only pais 350.00 for it. I knew the manager at TS. Last one. Grabbed it up. Never looked back. Just need the cleaning sprayer. Great unit.
If you need to build yourself up and are using a smaller machine you can still get alot of the amenities that come with larger units and transfer them to the bigger unit if you get one. Quick connect kits for converting the m22 fittings so you can use quick connect pro hoses. Quick connect kits $30 at lowes. Get yourself a 4kpsi 100ft semi pro hose from pressure tek for $120. They also sale the jrod tips for around $50,and ball valves,and downstream injectors at real affordable prices too. Combine that with a lightweight zero g garden hose and you've got a real decent setup that's transferable if and when you upgrade. With a 2.5gpm unit itll take you longer than if you had a 4gpm unit,but itll still.make plenty of money. All the accessories I mentioned will help make your work easier and faster so you can get home to play with the kids or on to the next job.
Choke is *only* for start up, once the engine has started and/or is up to operating temperature it should *always* be turned all the way off. You should never run an engine (any engine) for extended periods of time with the choke on. You will cause the engine to run richer than it should which leads to excessive gas usage and carbon deposit buildup inside the cylinder/exhaust. It will also rob your horsepower!
I used to have pressure washer about that size. It would suck the hose flat. I replaced the garden valve with a large diameter ball valve and it still sucked the hose flat. If you want a big pressure washer, be carefull of the supply.
It's an air cooled engine and it's good to let it idle with no load (ball valve open) to keep pump cool as well before shutting off. This cools down the engine before you shut it fown
I've got pretty much this same pressure washer, but under the DeWalt brand name I got at Home Depot sometime around 2010. It has the same engine and I believe the same pump. I HATED, and I mean that sincerely, the hose and nozzle that came with it. The hose was WAY too stiff and the nozzle was so-so. I don't know if Simpson sourced theirs better, but I would encourage anyone to buy a better hose and spray gun anyway. The Flexilla hose is a good one. I think Amazon sells them now. They also have a good spray gun that is a knock-off of Italian models. It works pretty well.
I run the same machine and rarely choke it after the first start. I change the oils in the motor and pump regularly and use ethanol free gas. I change the air filter, and spark plug regularly and once a year I set the valves. Mine still runs like the day I bought it and I’ve had to do nothing to it except for the regular maintenance it requires.
I JUST BOUGHT A SIMPSON PRESSURE WASHER. BOUGHT IT AT TRACTOR SUPPLY. BEST PRICE GOING ON A PRESSURE WASHER AT THEIR STORES. MINE WAS 232 DOLLARS FOR A 3100 PSI MAXIMUM. EXCELLENT WASHER. EASY START. ROLLS TO BE ABLE TO MOVE IT EASILY. GOOD FLEXIBLE HOSE. STARTS ON FIRST PULL EVERY TIME. DOES NOT USE TONS OF FUEL. SMOOTH RUNNER. 😊
Great video as always but your 2 hours of run time could be due to the fact that you said you run the motor on full choke the whole time, I use the same Simpson pump with the Honda 270 and get almost 4.5 hours of run time out mine. Of course usage may vary due to variations in altitude, RPM settings, and water pressure settings. But awesome job though.
Do you wash homes with yours? I just ordered the one you mentioned from Lowe's. I've been using a 2.5 gpm unit,but even with 2nd story tips couldnt quite wash 2 story homes. I'm hoping this new washer will solve that problem. It's a good looking unit with alot of good reviews.
Truly a deal. If you want to upgrade the pump after a few years of use would also be a smart long term plan. Approximate upgraded pump is 249.00 for the General brand.
I have Simpson 3300. Bought at Tractor Supply. Amazing the price increase in 2yrs on them. Kinda would like to upgrade to a 4000psi 4/gal. Do like the Honda Motors on them
I seen, most expensive and thought, "Has to be the Simpson!" Yup! But that's not the one I seen online when I was shopping. There is another around 2,200.00 or so.
Great video Here’s some tips for the Honda’s Fist start of the day 1/3 throttle and full choke. Let it warm up for 30sec - 1 min and then rev her up. Idle for a few seconds before turning off.
I was about to buy pressure wash at Northern tools (NorthStar) with the same features as this one in the video but the price is $1,700 but after watching this videos changed my mind, GX 390 is a beast!! Kat pump and AAA pump are both good. Thanks for the information 👍🏼
First off, its CAT pump 2nd AAA is not even in the same universe of quality as a CAT. Cat pumps are like 100X better then AAA, with that being said I just bought a new AAA pump because it was $260, and the CAT pump was $725 for around the same specs. But I only use my pressure washer every few months, so I don't need the best pump out there.
The best pressure washer you can buy for the same money is one with a Honda engine and a CAT pump which is precision machined water pump not the cast aluminum style pumps like on this unit, as they wear out much quicker. I have owned one for years with no problems for personal use but commercially rated. I would highly suggest making it your next purchase it wont disappoint you.
That's a nice PW but for an extra $100 you can buy a Northern Tools PW that has the same engine but it also comes with a CAT pump which is far superior to the pump that comes with the Simpson unit.
Ozzie Alarcon, agreed. Pressure Pro makes a ton of PWs that have better pumps, proper tips (usually orifice size is too small on "store" bought models) and the same awesome Honda engines for just a few more bucks.
I recently upgraded my old Honda powered Billy Goat to a new one and had a similar problem with fuel. I don’t think it was using much more but the tank was half the size, I’d love to know who thought that was a good idea, I’m forever refilling it
That’s a big boy toy right there bro that thing is pretty keep pushing out the videos that’s how we grow bro pushing that 🔥🔥 content one after another love seeing you grind bro makes me grind hard as hell too
Dudeeeeee what the heck. I’m just browsing through some vids in my watch later and I knew something about you seemed relatable. All I had to see was “Hammond Lowe’s” and knew it. Fellow Louisianian! Super cool to see someone on the interwebs that’s local. Keep doing your thing in the 985 (I’m in 225).
GREAT job, working hard and making money. Just a thought if you hurt your back or pull something you won't be making any money brother. Buy a cheap winch from Harbor Freight and bolt it down somewhere you can live with in your van, buy or make some cheap ramps and lower it out of and load into your van that way. My won't need a serious winch or ramps but the weight of that unit is enough if you lift it wrong to cause some serious damage, you are your business. I'm positive you could build it quickly for under $150. Right now HF has a Badland 2500lb ATV winch for $54.99 with digital coupon, so really for well under $100 you could build this setup.
I just got the same one. Last week it was $100 off and I applied for the credit card and got another $100 off. I got it for $699 I have not used it and it’s killing me!
High power washers are 100 % where it's at if u have never used 1 it's amazing how fast and how strong they are I've got a 13 hp Honda model belt drive it will cut a 2x4 in haft it's so strong and I mean by just swiping it over the board I will never put the 0 nozzle back in it's a weapon with that in the sprayer !!
Lowes has this one and one with a simpson motor at 4gpm that's $50 cheaper. Is it worth the sacrifice in quality for that 1/2gpm more. It actually has a better rating than the Honda motor.
Your great review convinced me to get this Simpson, and following your Amazon link your yellow surface cleaner is a 20". Is this 3.5 GPM enough flow to keep the 20" surface cleaner running well?
First of all thank you for all your videos and knowledge of how to navigate this genre of business. I am brand new to the business and started with an electric unit then shifted quickly to gas after about three jobs. I went with a Dewalt 3100psi 2.3 gpm unit from Home Depot. I like the Simpson a lot as well due to the Honda motor and the price. There is about a hundred dollar difference buying at home depot. Do you think it's a good thing to buy in store as opposed to buying online, when it comes to these units, due to service needs down the road, both units having Honda engines?
I HAVE A RYOBI 3300 PRESSURE WASHER.... IT HAS BETTER OPTIONS. BUILT-IN SUDS TANK AND I GOT IT FOR ABOUT HALF THE PRICE AND I DO BELIEVE IT'S BETTER THAN WHAT'S ON THE VIDEO NOW....
Ive had this pressure washer on my radar for the past few weeks and it's interesting 3 years later the price is about $40 more but today I checked the price of it and it's on sale at Home Depot depot for the exact price it is in this video lol
Hello. I hope you may know the answer to this but I seem to not know where to find this information at. Here I go lol I started a side gig here in town with my own power washing business. I purchased a 225 Gallon power washer that shoots 4 GPM. I wanted to know if you knew what the ratio solution to water would be? I thought it would tell me when I bought it but guess not :( Thanks for your time!
Hey man I just purchased a SIMPSON PowerShot 4200 PSI 4 GPM Gas Cold Water Professional Gas Pressure Washer with HONDA GX390 Engine (49-State) with a triple x pump but I heard a cat pump is better and more reliable but I heard a triple x is also good but they are prone to messing up especially the simpsoms ones which is that I got should I be worried ?
I always wish I could have had a commercial powerwasher like yours. For your business, do you have one of those big water tanks with it and how do you charge too?
Had the idea to start a pressure washing business and found your vids! They’re keeping me inspired to get everything set up! Have you done any soft washing or plan to in the future?
I heard you mention washing your car with this? How does this not ruin your paint? Is there a better tip to switch to to help prevent the damage or are you just standing back further?
How's the pressure washer holding up looking at pulling the trigger and purchasing one this week. I got you on using the Ethanol free gas, which is hard to come by.
If you had the choice would you have gone with the 4200psi 4.0g/m model instead? Also does the machine you have have enough power to reach high areas such as the 2nd floor exterior walls of a house? I need something that has the power to hit eaves 25-30 feet up.
Get a second story nozzle www.amazon.com/Tool-Daily-Quick-Connect-Pressure-4000PSI/dp/B073TGTZWH/ref=mp_s_a_1_1_sspa?keywords=second+story+nozzle+kit&qid=1559421075&s=gateway&sprefix=second+sto&sr=8-1-spons&psc=1
Hi Justin, love the videos! I’m looking to start a side hustle, focusing primarily on flatwork. I’ve boiled my options down to a Dewalt 3600 2.5 ($599) or a SIMPSON 3800 3.5. ($799). Goal would be to utilize a surface cleaner effectively. Thoughts on this? Is bigger always better in this case? Thanks! Chris
With regards to the surface cleaner utility I would be focusing on getting the highest GPM unit you can. The higher the flow rate the more efficient the surface cleaner.
Hey Justin, I’ve been following and watching a lot of your videos. I’ve been wanting to get into this business but didn’t know how. You have given me the courage! Thank you! I’m buying a used Simpson 4400 4 GPM with a 16” surface cleaner along with multiple hoses for $850. Is that a good price? What questions should I ask about it before I give the final answer?
🛑 PRESSURE WASHING BUSINESS COURSE: bit.ly/LOCALDOMINATIONJUSTIN
✅ Free Pressure Washing Business WebClass: bit.ly/ICWebby
💵 Wood Cleaning Course: bit.ly/WoodCleaning
▶️ MY FACEBOOK AD STRATEGY COURSE: bit.ly/FBADSJUSTIN
👉🏻 TRY THIS CRM FREE: IHttps://jobber.grsm.io/justinrogers8730
💰 FREE INSURANCE QUOTE: www.nextinsurance.com/justin
☎️ 1 ON 1 COACHING: clarity.fm/foreverselfemployed
MY PRESSURE WASHING SET-UP
BALL VALVE: amzn.to/2FZ9aeO
X JET: amzn.to/33QYQh7
Current Pressure Washer: amzn.to/2W2GQzo
Current Surface Cleaner: amzn.to/2XsIr1z
Beginner Pressure Washer: amzn.to/2HVviXf
Pressure Washer Hose: amzn.to/2CsQcbU
Garden Hose: amzn.to/2CqIGhS
Wand Tips: amzn.to/2OhfLBf
Surface Cleaner: amzn.to/2ui0kzP
CURRENT SURFACE CLEANER: amzn.to/2XsIr1z
Pressure Washing Playlist: ruclips.net/video/ju3s1WbmCmE/видео.html
LIKE//SUBSCRIBE//THANKS FOR WATCHING
LIKE//SUBSCRIBE//THANKS FOR WATCHING
JUSTIN’S SOCIAL:
Instagram: instagram.com/jrogerskillinem/?hl=en
Soundcloud: soundcloud.com/jrogers_killin_em
Business Inquiries/ Features: jrogerstv1234@gmail.com
The link for the surface cleaner is directing me to some cheap 80 dollar one and not the one I see you use, please help , looking to order today .
The link is in the description of this video
ruclips.net/video/sT6BiCrVFUQ/видео.html
@@ForeverSelfEmployed thanks alot bro you're the man lol, do you have a snapchat that you use for these jobs as well that ppl could add you on ? I dont have Instagram or facebook is why I'm asking and it seems like some of these jobs I've seen you do would make cool little videos .
Use motor bike ramps for ur pressure washer 🇬🇧🇬🇧🇬🇧😎😎😎😎
@Forever Self Employed How do you get the concrete soapy without your pressure washer having a soap dispenser?
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ruclips.net/user/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
Justin, to your question about the choke, you definitely want to adjust it. Usually Full choke to start it up, then choke completely OFF once it gets going and you're powerwashing. By running it half choke, you're running it rich (extra fuel) and these carbs are tuned to give you a stoichiometric mix when the choke is off. Choke off keeps carbon buildup at a minimum and burns less gas while giving more power. Great video thanks for sharing!
Thank you for the great information Carlos!
Forever Self Employed I also know these engines well and yes, make sure the choke is completely OFF once the engine is running. If it’s not then you will start to have problems very quickly.
Is this available in India
@EvoMore as soon as It starts turn the choke completely off. the choke is only used during start up.
@@bobbysingh7807 research it yourself
Very good review. I bought this same unit in 1997 and it just laid down on me this year. I'll never own one that doesn't have a honda motor. We had a Simpson at work and that's why I went with it to begin with. It was belt driven and quite a bit more expensive. These are great units and I'm going to Lowe's for my next one. Thanks again.
I just purchased a Simpson 4400PSI/4GPM and brand new out the box it has a bad unloader. It stays in constant high pressure mode and activates pop off valve immediately.
I replaced the AAA pump with a Honda AR pump 4400/4gpm and it works fantastic now. Didn’t have time to wait 2 months for the repair shop to fix it.
Jetstream Power Wash ~They were telling me it’s part of the pump. I didn’t and could t wait to find out I got another bad apple.
The Honda AR pump has all individual parts. Each part is quick to change saving down time. Overall just a much better pump. I might replace the unloaded on the other one and keep for a back up plan.
One of the best well spoke reviews of anything I’ve seen on the internet.
Hey thanks a lot! I really appreciate that!
I had a Simpson for year's it always started right up the pump died and it was 10 year's old, i just got a mi-t-m at Sherwin Williams 4000 psi 3.5 gallon per minute cold water direct driven i like it because it's on an aluminum frame it's about the same size as the Simpson but it lighter my Simpson was a tank also the Simpson was 2 grand the mi-t-m cost about $900 Sherwin Williams had a Contractor sale they gave me a drill set too
If anyone is thinking of pressure washing full time get a commercial grade washer they're worth it in the long run the cheap ones are unreliable but do the best you can with whatever budget you have i mostly paint but i like to have decent equipment and i always wash a house before painting
Great review , I have been looking at it myself. I have been running a simpson 2.5 gpm 3300psi with honda gx200 motor....I know everyone says you need 4gm..but it was in my budget last year and it does excellent for my gets all my homes and driveways clean and made me some nice money. I get about 3.5hrs per tank......keep up the good work and awesome videos
Same thing I run too
Just bought and am about to go try it on a job now
I would definitely only use ethanol free gas for homeowners who only crank it up a few times a year.
I would recommend airplane fuel. I park my 1987 Electra-Glide every winter with airplane fuel and it starts right up, even with 100,000 miles on it. Use it on my snowblower, weed trimmer, and chainsaws, which are not used very often.
For the everyday home owner it would be a great tool to have but if you are running every day you need to spend $1700 an get a belt drive stay away from AAA pumps get a CAT or GP 4gpm or higher best on the market an what you said about the Honda engines is fact they will outlast any other if maintenance is kept up.
I agree, cat and general pumps are the way to go. I’m still running direct drive for this year but I’ve got Honda gx270 and cat pump.
Are you saying that because this one won’t last.?
@@Jimmy_Cavallo he's saying that because pumps can be replaced or upgraded. One's pre-installed, like mine, will eventually fail and the only thing I can do is replace the whole machine. That is 600 dollars, whereas a pump will cost you 70 if you go to northern tool. I will eventually buy a pump and downstream. I am still saving to buy a 4.5 gpm machine.
Folding ramps will help in the loading and unloading of the washer.
Hey Justin, I saved some money and decided after doing some research to give this a shot. I'm going with a the Simpson Megashot 3200 psi washer, 31 inch extender, surface cleaner to start off. Excited to see where this goes thanks for inspiring others to take a shot at this business, your positive attitude and encouragement has been helpful. Thank you.
How's it going? Curious?
Should of got the 4000psi
@@stef2703shoulda, coulda, woulda 🫤
@@stef2703no need if you’re just starting… Even a weak 1700psi electric washer is good enough for starting.
Hope it's going good my boy
You and my brother are the ones that helped me gain the confidence to start my business and the tips I've used from you have made me more money each job and more jobs locally. You are truly a pressure GOD🙏 . Couldn't have done it without and support or little confidence you give to other smaller businesses and handymen.
I love seeing you young fellows getting out there and working for yourselves. Respect!! 👴🏻👍🏻
Great video as always, I have my first paid pressure washing job today and I'm excited
Damn bro I’m really proud of you! Good luck!
I’m thinking about getting into the biz myself. A year later, how are you doing? Still at it? Should I take the plunge? Thanks and all the best!!
tacey01 just do it. You have 30 days to return the pressure washer if it doesn’t work out.
How much did u charge
Justin my man, chasing that revenue. Love the in deep review and the fact you actually own it.
Keep up the hustle.
I bought this same at lowes for $450 on clearance. Bought the extended warranty. 2 years later I've had zero problems with it. This thing is a beast
Justin is straight up and tells it like is. I definitely recommend taking his advice. Please hit that like button to help him out.
1:04 1:05 1:07
The internet & RUclips is amazing. My dude hustles 24/7 I love the grind homie. Definitely never thought of this as a side income. Im a retired vet, everyone in my neighborhood has long driveways and 2 car garages. $150-$250 a pop not bad keep hustling
triple that price
I just bought the 3700 psi pressure washer from lowes too it was 699.00 and it has all the same stuff as the 4000 psi except the 300 extra pressure been using mine alot and its pretty sweet but I just use it around the house for lawn tractors,trucks house ect, been working really good so far got an extra 3 year warranty from blowes ,good luck with yours I guess we will see how long they last lol great video
Hey thanks so much for the comment! I think they are good pressure washers but you are right only time will tell!
Why not build a wood ramp to hook on the back of your van? easier loading/unloading, just a thought. Great review.
That’s what I’m saying
I have the 3700 psi and just purchased this one 4000 psi. 3700 is mainly for houses and my new 4000 is mainly for concrete. Cant wait to try it out
I just bought this pressure washer today going to start off small with friends and family and work myself up.
Please consider using Bestline oil additive, 1-2 ounces per quart(about $1.50 per ounce) on small Honda engines.I have used it with great success for years. I believe it had extended the engine life and lowers running temperatures. I have seen many years of life out of my Honda engines with this and pure synthetic oil. Cheap insurance for an expensive engine. I use only the best oils. (Mobil 1, Pennzoil Platinum, Amzoil, which ever one is on sale and change it often (around 25 hours) Ron A
Ty
To be fair.. for paid pressure washing work, cheapest I would go is around the $899 mark on Amazon for the Simpson 4.2GPM. All about the GPM at a certain point.
No comments pertaining to triplex pumps? Thats what your steppin up to with this unit. AAA are ceramic lined pistons. Cat have full ceramic pistons and are worth the extra cash. Plus you guys running units 5-8 hrs a day 5 days a week should go with the belt driven models with Cat triplex pumps.
Been watching your videos and gotta say their pretty cool and informant. Many people are always going to question your methods but I believe in doing what works for you. Keep it up dude and make that money baby.
I got the 3400 psi honda 200 engine. Its great. Tri pump. It will cut through wood if your not careful. 2.7 gal. I love how it works but pressure washing is fun for 3 4 hours.5hen its a job, god bless you. But it is superb.
I only pais 350.00 for it. I knew the manager at TS. Last one. Grabbed it up. Never looked back. Just need the cleaning sprayer. Great unit.
Have belt drive with Honda engine and cat pump, mainly home use some commercial 30 years still kickin, only changed engine oil.
Get yourself a ramp to load and unload your washer or as I do leave it in your van,I'm pressure washing 20yrs and it never leaves my van
Matt ML Cleaning 20 years??? Do you do it as a living?
Kyle Williams I am wondering the same thing myself. 🤔
If you need to build yourself up and are using a smaller machine you can still get alot of the amenities that come with larger units and transfer them to the bigger unit if you get one. Quick connect kits for converting the m22 fittings so you can use quick connect pro hoses. Quick connect kits $30 at lowes. Get yourself a 4kpsi 100ft semi pro hose from pressure tek for $120. They also sale the jrod tips for around $50,and ball valves,and downstream injectors at real affordable prices too. Combine that with a lightweight zero g garden hose and you've got a real decent setup that's transferable if and when you upgrade. With a 2.5gpm unit itll take you longer than if you had a 4gpm unit,but itll still.make plenty of money. All the accessories I mentioned will help make your work easier and faster so you can get home to play with the kids or on to the next job.
Is it worth it?
All you had to say was Honda GX -YES!
Choke is *only* for start up, once the engine has started and/or is up to operating temperature it should *always* be turned all the way off. You should never run an engine (any engine) for extended periods of time with the choke on. You will cause the engine to run richer than it should which leads to excessive gas usage and carbon deposit buildup inside the cylinder/exhaust.
It will also rob your horsepower!
That's an unloader valve. Don't use that to adjust pressure. To adjust the pressure go with a higher flow rate nozzle.
why wouldn't you use that?
I've heard that, even though that's what the adjuster/unloader is for, I've heard it can put out more strain on your engine.
No it's not. Even the Simpson factory videos explain that it's designed to alter the pressure
I used to have pressure washer about that size. It would suck the hose flat. I replaced the garden valve with a large diameter ball valve and it still sucked the hose flat. If you want a big pressure washer, be carefull of the supply.
Honda engine and Mi-T-M pump is the best way to go.
When you shut your machine off... it's always better to let it sit and idle for about 30 seconds before shutting off.
Why
@@sothickitssickk it's never good to go from wide open to stop.
It's an air cooled engine and it's good to let it idle with no load (ball valve open) to keep pump cool as well before shutting off. This cools down the engine before you shut it fown
Thought you sounded like you were from Louisiana, then I see available in Hammond on the Lowe’s site.
Guess I was right?
Thanks for sharing your list of products you use... it's much easier making a purchase from a trusted review!
I just picked this up a few days ago on clearance at lowes. 825 bucks half price regular 1650
Also you need a turbo tip. The tornado
I've got pretty much this same pressure washer, but under the DeWalt brand name I got at Home Depot sometime around 2010. It has the same engine and I believe the same pump. I HATED, and I mean that sincerely, the hose and nozzle that came with it. The hose was WAY too stiff and the nozzle was so-so. I don't know if Simpson sourced theirs better, but I would encourage anyone to buy a better hose and spray gun anyway. The Flexilla hose is a good one. I think Amazon sells them now. They also have a good spray gun that is a knock-off of Italian models. It works pretty well.
i got a BE gas pressure washer 210 cc Chinese CLONE ENGINE
3000 psi works amazing !!!
only $300 CAD
I run the same machine and rarely choke it after the first start. I change the oils in the motor and pump regularly and use ethanol free gas. I change the air filter, and spark plug regularly and once a year I set the valves. Mine still runs like the day I bought it and I’ve had to do nothing to it except for the regular maintenance it requires.
I JUST BOUGHT A SIMPSON PRESSURE WASHER. BOUGHT IT AT TRACTOR SUPPLY. BEST PRICE GOING ON A PRESSURE WASHER AT THEIR STORES. MINE WAS 232 DOLLARS FOR A 3100 PSI MAXIMUM. EXCELLENT WASHER. EASY START. ROLLS TO BE ABLE TO MOVE IT EASILY. GOOD FLEXIBLE HOSE. STARTS ON FIRST PULL EVERY TIME. DOES NOT USE TONS OF FUEL. SMOOTH RUNNER. 😊
Great video as always but your 2 hours of run time could be due to the fact that you said you run the motor on full choke the whole time, I use the same Simpson pump with the Honda 270 and get almost 4.5 hours of run time out mine. Of course usage may vary due to variations in altitude, RPM settings, and water pressure settings. But awesome job though.
Do you wash homes with yours? I just ordered the one you mentioned from Lowe's. I've been using a 2.5 gpm unit,but even with 2nd story tips couldnt quite wash 2 story homes. I'm hoping this new washer will solve that problem. It's a good looking unit with alot of good reviews.
Truly a deal. If you want to upgrade the pump after a few years of use would also be a smart long term plan.
Approximate upgraded pump is 249.00 for the General brand.
I have Simpson 3300. Bought at Tractor Supply. Amazing the price increase in 2yrs on them. Kinda would like to upgrade to a 4000psi 4/gal. Do like the Honda Motors on them
I seen, most expensive and thought, "Has to be the Simpson!" Yup! But that's not the one I seen online when I was shopping. There is another around 2,200.00 or so.
Throttle just like a boat or anything constant speed. No choke and 3/4 Throttle. Im upgrading from this unit to a Graco GForce 2 4040 belt driven.
Great video
Here’s some tips for the Honda’s
Fist start of the day 1/3 throttle and full choke.
Let it warm up for 30sec - 1 min and then rev her up.
Idle for a few seconds before turning off.
Heavier unit, buy or make a ramp. Good video. I'm expecting delivery of a Simpson unit, 3400, 2.8. I hope it does the job.
Hows your 3400, 2.8 treating you any issues
I was about to buy pressure wash at Northern tools (NorthStar) with the same features as this one in the video but the price is $1,700 but after watching this videos changed my mind, GX 390 is a beast!! Kat pump and AAA pump are both good. Thanks for the information 👍🏼
First off, its CAT pump 2nd AAA is not even in the same universe of quality as a CAT. Cat pumps are like 100X better then AAA, with that being said I just bought a new AAA pump because it was $260, and the CAT pump was $725 for around the same specs. But I only use my pressure washer every few months, so I don't need the best pump out there.
I am curious, were you able to use the 20 inch surface cleaner at 3.5 gallons per minute?
Thanks for this video! I purchased the exact same model from Lowes last night!
The best pressure washer you can buy for the same money is one with a Honda engine and a CAT pump which is precision machined water pump not the cast aluminum style pumps like on this unit, as they wear out much quicker. I have owned one for years with no problems for personal use but commercially rated. I would highly suggest making it your next purchase it wont disappoint you.
I just bought the 3400 psi Honda engine gx 200 with the cat pump, on aluminum frame very excited and happy with it so far
If you drain the gas completely out of the carb, you can store it indefinitely.
indefinitely ... where the water pump won't freeze.
I’m going with the ryobi 3000psi model as a starter. Cheaper, lighter and the top handle could easily be taken off for a small car to transport.
Lol
Crap
Be humble my guys, ya will probably won’t go far with that mentality.
That's a nice PW but for an extra $100 you can buy a Northern Tools PW that has the same engine but it also comes with a CAT pump which is far superior to the pump that comes with the Simpson unit.
Ozzie Alarcon, agreed. Pressure Pro makes a ton of PWs that have better pumps, proper tips (usually orifice size is too small on "store" bought models) and the same awesome Honda engines for just a few more bucks.
Simpson does offer units with Cat pumps. They cost more for obvious reasons.
I agree My AAA Pump failed after 4-5 washes. Seals not under warranty. I replaced with a CAT Pump, no regrets.
I recently upgraded my old Honda powered Billy Goat to a new one and had a similar problem with fuel. I don’t think it was using much more but the tank was half the size, I’d love to know who thought that was a good idea, I’m forever refilling it
That’s a big boy toy right there bro that thing is pretty keep pushing out the videos that’s how we grow bro pushing that 🔥🔥 content one after another love seeing you grind bro makes me grind hard as hell too
Dudeeeeee what the heck. I’m just browsing through some vids in my watch later and I knew something about you seemed relatable. All I had to see was “Hammond Lowe’s” and knew it. Fellow Louisianian! Super cool to see someone on the interwebs that’s local. Keep doing your thing in the 985 (I’m in 225).
If it hasn't been said already , gas mileage might be explained if you open that choke .
GREAT job, working hard and making money. Just a thought if you hurt your back or pull something you won't be making any money brother. Buy a cheap winch from Harbor Freight and bolt it down somewhere you can live with in your van, buy or make some cheap ramps and lower it out of and load into your van that way. My won't need a serious winch or ramps but the weight of that unit is enough if you lift it wrong to cause some serious damage, you are your business. I'm positive you could build it quickly for under $150. Right now HF has a Badland 2500lb ATV winch for $54.99 with digital coupon, so really for well under $100 you could build this setup.
Your videos are great. I am looking to start a pressure washing business, tired of the desk job. Will be checking out your courses.
Thanks for the overview. Good comments and spot on regarding the concrete cleaning. You need the stronger PSI
Turn the gas off and let it run until it stops. That way there is no gas left in the carb. I love my Simpson 4200 belt drive water blaster!
I just got the same one. Last week it was $100 off and I applied for the credit card and got another $100 off. I got it for $699 I have not used it and it’s killing me!
Wow excellent buy my friend!
High power washers are 100 % where it's at if u have never used 1 it's amazing how fast and how strong they are I've got a 13 hp Honda model belt drive it will cut a 2x4 in haft it's so strong and I mean by just swiping it over the board I will never put the 0 nozzle back in it's a weapon with that in the sprayer !!
Lowes has this one and one with a simpson motor at 4gpm that's $50 cheaper. Is it worth the sacrifice in quality for that 1/2gpm more. It actually has a better rating than the Honda motor.
Have you done a maintenance vid on your machine ? Upload plz
Your great review convinced me to get this Simpson, and following your Amazon link your yellow surface cleaner is a 20". Is this 3.5 GPM enough flow to keep the 20" surface cleaner running well?
You are a great guy keep on helping people
Choke on full for about 10-15 seconds. Then half choke for 5 seconds. Then should run smooth and save in gas because of lower revs.
Also you should do a tour of your van
I got the same one but I order online and got the cat pump the best pump on the market
Where did you buy a? Thank you
@@eeezzztolv Water cannon.com they let you build your own
@@jefferysawyer24 thank you so much!!
First of all thank you for all your videos and knowledge of how to navigate this genre of business. I am brand new to the business and started with an electric unit then shifted quickly to gas after about three jobs. I went with a Dewalt 3100psi 2.3 gpm unit from Home Depot. I like the Simpson a lot as well due to the Honda motor and the price. There is about a hundred dollar difference buying at home depot. Do you think it's a good thing to buy in store as opposed to buying online, when it comes to these units, due to service needs down the road, both units having Honda engines?
$900 is a killer price for that. The current model for around $899 has 3200 psi and 2.5 gpm.
That calls for a hard rubber ramp it we'll save your back keep up the good work bro😝
I HAVE A RYOBI 3300 PRESSURE WASHER.... IT HAS BETTER OPTIONS. BUILT-IN SUDS TANK AND I GOT IT FOR ABOUT HALF THE PRICE AND I DO BELIEVE IT'S BETTER THAN WHAT'S ON THE VIDEO NOW....
Just bought this brand new and can’t get the damn thing started
What about using it for side work on the weekends, say 2-6 hours a weekend?
Ive had this pressure washer on my radar for the past few weeks and it's interesting 3 years later the price is about $40 more but today I checked the price of it and it's on sale at Home Depot depot for the exact price it is in this video lol
Hello. I hope you may know the answer to this but I seem to not know where to find this information at. Here I go lol I started a side gig here in town with my own power washing business. I purchased a 225 Gallon power washer that shoots 4 GPM. I wanted to know if you knew what the ratio solution to water would be? I thought it would tell me when I bought it but guess not :( Thanks for your time!
That's a very very nice pressure washer sir !! GOOD CHOICE
Michael Chamberlain this is the same as the Dewalt 4000psi 3.5gpm.. it’s a rebadged Simpson that cost $30 more
What type of fuel do you use in this? I’m confused because manual says LPG Fuel only (liquified petroleum gas)
Justin you doing great job on all your vids me IAM starting a pressure washing keep on the great job
Hey man I just purchased a SIMPSON PowerShot 4200 PSI 4 GPM Gas Cold Water Professional Gas Pressure Washer with HONDA GX390 Engine (49-State) with a triple x pump but I heard a cat pump is better and more reliable but I heard a triple x is also good but they are prone to messing up especially the simpsoms ones which is that I got should I be worried ?
I always wish I could have had a commercial powerwasher like yours. For your business, do you have one of those big water tanks with it and how do you charge too?
i was wonderong what would happen if you would take the throttle down a bit? maybee it would take less gaz?
Had the idea to start a pressure washing business and found your vids! They’re keeping me inspired to get everything set up! Have you done any soft washing or plan to in the future?
How did everything work out ? I’m starting my business as well as we speak
I heard you mention washing your car with this? How does this not ruin your paint? Is there a better tip to switch to to help prevent the damage or are you just standing back further?
How's the pressure washer holding up looking at pulling the trigger and purchasing one this week. I got you on using the Ethanol free gas, which is hard to come by.
If you had the choice would you have gone with the 4200psi 4.0g/m model instead? Also does the machine you have have enough power to reach high areas such as the 2nd floor exterior walls of a house? I need something that has the power to hit eaves 25-30 feet up.
Get a second story nozzle www.amazon.com/Tool-Daily-Quick-Connect-Pressure-4000PSI/dp/B073TGTZWH/ref=mp_s_a_1_1_sspa?keywords=second+story+nozzle+kit&qid=1559421075&s=gateway&sprefix=second+sto&sr=8-1-spons&psc=1
I just ran into your channel I your review on the 4000 psi pro series I also bought one today 10/29/2021
Hey Masor...The behavior of it after this 7 months, how's it treating you.?lol
What your best electric pressure washer reccomendation? Ryobi?
Hi Justin, love the videos! I’m looking to start a side hustle, focusing primarily on flatwork.
I’ve boiled my options down to a Dewalt 3600 2.5 ($599) or a SIMPSON 3800 3.5. ($799). Goal would be to utilize a surface cleaner effectively.
Thoughts on this? Is bigger always better in this case? Thanks!
Chris
With regards to the surface cleaner utility I would be focusing on getting the highest GPM unit you can. The higher the flow rate the more efficient the surface cleaner.
The more flow rate is where it's at 100% hope u got that 1 !!
Great review. I enjoy your videos. You didn't mention if it had a reservoir for cleaning fluids.
Do you need to start with vhemicals or no?
Hey Justin, I’ve been following and watching a lot of your videos. I’ve been wanting to get into this business but didn’t know how. You have given me the courage! Thank you! I’m buying a used Simpson 4400 4 GPM with a 16” surface cleaner along with multiple hoses for $850. Is that a good price? What questions should I ask about it before I give the final answer?