So did they do upgrades and fixes because we just bought 1 and after reading all these comments now I’m wondering if I should say naah? A friend has 1 and he had nothing but good things to say about his!
This video is completely useless. We need some videos how to replace every component of the stove. My cleveland ps130w’s auger is jammed. This stove is made imposible to get the auger motor lose. If you owned one like mine, better not let the auger jam or you’ll just throw this trash away.
ive had nothing but problems with my cleveland. the fan went out just before the 1 year warranty expired. i had to pay for labor to replace it (nearly $500). now, 2 months into winter (less than a year later) the fan is again giving me problems. i will never buy another cleveland.
How in the gods name do you get it to quit shutting down mine burns amazing then after 30 minutes or so it shuts down and goes off im ready to beat it to pieces with a hammer
I had the hi temp set to 80 and the low temp set to 71 but I finally traded it off it was more of a headache than it was worth I'm burning ventless LP heaters now
what is the decimal o the stove? I owned a pellet stove about 3 years ago and to me it was to nosy. I wonder how loud your stove is? I think all stoves need to have a Decimal level rating just like all appliances have
Cleveland pellet stove are junk, don't waste your money on one. Iv tried mutiple different brands of pellets and can't get the stove to drop pellets everytime the auger runs. To top it off the control board has no option to fine tune the auger trim to try and get it to drop pellets everytime the auger turns on. Iv sent mutiple email to the service department and have not gotten one back. Complete junk save yourself the money and buy something other than a Cleveland Iron Works stove.
for you it was the auger, for me it was the exhaust blower motor. even under warranty, it cost nearly $500 in labor for 2 visits (one visit to remove, wait a week for the fan to arrive in the mail, then another visit to install). only a couple of months of use after the motor was replaced, it is giving me the same problem.
Dude you have to make better videos. It's panful to watch. Make a video on the bay front stove while it is in operation please. I want to see how the flame looks and how loud the blower is. I'm looking to buy it in a week.
Hey I see in your video here you say the stove heats up to 1800 sqft but when I check some local stores that carry out their showing 2500 sqft. My home is just over 2200 sqft. Would this stove work for me.
Thank you for your comment. There has been an update since this video was released. The square footage is 2500 sq ft for the Large Pellet Stove. Let us know if you have any other questions!
So did they do upgrades and fixes because we just bought 1 and after reading all these comments now I’m wondering if I should say naah? A friend has 1 and he had nothing but good things to say about his!
Thanks! This product is excellent!
The instructions refer to a differnt model for connecting the wifi, how do you connect the stove to wifi so it located on the app??
I have a same problem, the wifi light doesn't blink n I can't connect to it, it's out of the box new.
@@thaerss16 turns out you have to take the panel off (when the machine is not running) to access the button on the back of the panel.
This video is completely useless. We need some videos how to replace every component of the stove. My cleveland ps130w’s auger is jammed. This stove is made imposible to get the auger motor lose. If you owned one like mine, better not let the auger jam or you’ll just throw this trash away.
ive had nothing but problems with my cleveland. the fan went out just before the 1 year warranty expired. i had to pay for labor to replace it (nearly $500). now, 2 months into winter (less than a year later) the fan is again giving me problems. i will never buy another cleveland.
2 years in and need to change firepot and middle flue panel :-( , how do we change the panel?
Hi, what is the "factory set temperature" for the stove to power on on eco 1 mode?
Door is crooked. Not good quality control.
Made in China trash
Does the fuse automatically come installed with the P60w cleveland ironworks stove?
How in the gods name do you get it to quit shutting down mine burns amazing then after 30 minutes or so it shuts down and goes off im ready to beat it to pieces with a hammer
buy a different brand. i have had nothing but problems with my cleveland.
What do you have the temp set at, it should only shut down once temps reached. Do you have your thermometer to close to stove
I had the hi temp set to 80 and the low temp set to 71 but I finally traded it off it was more of a headache than it was worth I'm burning ventless LP heaters now
Throwing code E6 by any chance?
Parts can you buy them i looked parts up and see none.
what is the decimal o the stove? I owned a pellet stove about 3 years ago and to me it was to nosy. I wonder how loud your stove is? I think all stoves need to have a Decimal level rating just like all appliances have
I have this stove it’s super quiet
Mine is loud when shutting down
So how do you do the year end clean?
Did not tell me how to do the year endclean
Cleveland pellet stove are junk, don't waste your money on one. Iv tried mutiple different brands of pellets and can't get the stove to drop pellets everytime the auger runs. To top it off the control board has no option to fine tune the auger trim to try and get it to drop pellets everytime the auger turns on. Iv sent mutiple email to the service department and have not gotten one back.
Complete junk save yourself the money and buy something other than a Cleveland Iron Works stove.
for you it was the auger, for me it was the exhaust blower motor. even under warranty, it cost nearly $500 in labor for 2 visits (one visit to remove, wait a week for the fan to arrive in the mail, then another visit to install). only a couple of months of use after the motor was replaced, it is giving me the same problem.
Dude you have to make better videos. It's panful to watch. Make a video on the bay front stove while it is in operation please. I want to see how the flame looks and how loud the blower is. I'm looking to buy it in a week.
2.5 years and nothing but trouble with this stove. DO NOT BUY.
Hey I see in your video here you say the stove heats up to 1800 sqft but when I check some local stores that carry out their showing 2500 sqft.
My home is just over 2200 sqft. Would this stove work for me.
Thank you for your comment. There has been an update since this video was released. The square footage is 2500 sq ft for the Large Pellet Stove. Let us know if you have any other questions!
@@clevelandironworks4807 thank you for the reply