Don’t Miss This: Convert Your USB Devices to USB-C Cheaply!
HTML-код
- Опубликовано: 2 май 2024
- In this video, I'll show you how to upgrade any old USB device to USB-C for less than $1. I'll guide you through the process step-by-step. As an example, we'll use a faulty Blue Yeti microphone I bought on eBay for $30, including shipping.
🌟 Items (Affiliate-Links)
USB-C Breakout-Board (Mod)
s.click.aliexpress.com/e/_DDm...
Micro USB Test-Board :
s.click.aliexpress.com/e/_DCs...
USB-C Test-Board:
s.click.aliexpress.com/e/_DcJ...
Resistor (5.6K Ohm; 0402)
s.click.aliexpress.com/e/_DnM...
Solder Loupe
s.click.aliexpress.com/e/_DCE...
👉 🍿Watch Next
• Mod your PS4 Controlle...
Mod your PS4 Controller to USB-C | Here is how!
👨🔧 About Me
I'm Markus, your tech repair and modding expert. Join me as I extend the lifespan of consumer tech and reduce waste. Sometimes I melt, sometimes I destroy, but most of the time, I repair!
🛠️ My Gear (Affiliate-Links)
⮀ Tools & Equipment
Microscope Camera:
s.click.aliexpress.com/e/_DkK...
Microscope Optics (180x, 3rd from the left):
s.click.aliexpress.com/e/_DFH...
Microscope Barlow Lens (0.75x):
s.click.aliexpress.com/e/_DFE...
Microscope Light Ring
s.click.aliexpress.com/e/_De7...
Solder Loupe
s.click.aliexpress.com/e/_DCE...
Soldering Station:
s.click.aliexpress.com/e/_DDX...
Hot Air Soldering Station:
geni.us/nRlefKk
Fume-Extractor:
s.click.aliexpress.com/e/_Dnq...
Multimeter (UT61E+):
geni.us/usLtu
USB-Meter (UT658)
s.click.aliexpress.com/e/_DFE...
Parts Storage Box:
s.click.aliexpress.com/e/_DdQ...
USB Type-C USB-C 14 pin Connector Breakout:
geni.us/LibdC5w
Micro USB test board :
s.click.aliexpress.com/e/_DCs...
USB-C test board:
geni.us/BuqLfr
IFixIt Manta Precision Bit Set:
geni.us/6rgn
IFixIt FixMat:
geni.us/jjw83
IFixIt Probe and Pick Set (Dental)
eustore.ifixit.com/products/p...
Kitchen Timer
geni.us/Aeie6
⮀ Consumables
Resistor SMD Assortments
s.click.aliexpress.com/e/_DlO...
Silicon-Wires (30 AWG)
s.click.aliexpress.com/e/_DnS...
Eraser-Pen
geni.us/xDIjHW
Soldering-Sponge
geni.us/pMST
Low-Melt-Solder:
geni.us/PJA8BEm
Solder Wick:
geni.us/1fsD1PI
Isopropyl Alcohol Dispenser:
geni.us/XtdktN
Flux:
s.click.aliexpress.com/e/_DBP...
Solder Mask:
geni.us/KOeyF
📺 Channels You Might Like
StezStix Fix?: / @stezstixfix
My Mate VINCE: / @mymatevince
NorthridgeFix: / @northridgefix
TronicsFix: / @tronicsfix
TheCod3r: / @thecod3r
Macho Nacho Productions: / @machonachoproductions
-----
#modding #mod #upgrade #usbc #mods #usbmod #soldering 
Наука
Want more tips on how to mod your devices to USB-C?
👉🍿Watch Next
ruclips.net/video/VvKj_7JHxzo/видео.html
Mod your PS4 Controller to USB-C | Here is how!
Great vid :)
Thank you! 🤓😋
Another great video 🤩 thank you for keeping it up 💪 (blower gave me a jumpscare lmao)
Thank you so much, mate! Sorry for making you jump 😄✌️
19:32 hahaha you got me
😉
USB-C is my love language
You are my man! 🙌
11:35
LOL reminds me of raspberry pi 4 engineers.
You need 2x 5.1k resistors on both CC1 AND CC2 separately, You can't short them together and use 1 resistor.
BTW, I see aliexpress has boards with 2 pads, seems like your board is an old revision. Some have resistors already soldered.
Hi Jackie! Yes, I know this setup isn't ideal, but I haven't found any issues with it so far. Do you have a link to the upgraded boards you mentioned? I would update the product links to make things even easier! 😉
Came across your channel recently and have came back to your videos for learnjng different things. I have a question. Do you know of a 6 pin type c breakout board with 2 spots for the 5.1 surface mount resistors? Trying to put one in my 3ds and make it able to do c to c charging as well as a to c charging. I have found some that others have built specifically for the 3 ds but they get rather expensive if doing more than one
Hi Knuckles! Thanks for your support, it means a lot to me. 😍 Do you have a link to these breakout boards? But why wouldn’t it work? ;-)
@@CanWeFixThat I will look for the link of the ones I had found a month or two ago, I just got a pcb etching kit and am going to try to make the board myself so it doesn't get too pricey that way, but I just wanted to see if you knew of one I could purchase like from Amazon or something that just would have made it easier because the 5.1 surface mount resistors are so small my hands start to shake when trying to mess with them lmao
I'm looking to get a similar microscope setup, however your link for the 180x lens points to a page with two items that are listed as "180X 50mm", but look very different. One is 45USD, the other is 102USD. Which is it? Also, do you have links for the light ring and articulating arm mount you are using? Thanks!
Hi Andrew! I looked it up, it's the 180x, third from the left in the selection. I updated the video description with the info about the light ring. The articulating arm I'm using is a DIY solution from an old computer screen table mount-not recommendable. ^^
only $1? seems interesting.
Hi Pablo! Yes, the boards are dirt cheap! 🤑
So this time a little later than usual :D great video :) PS: Sie haben Post ;)
Hi Sebastian! Thanks! By the way, I've started using the other flux in the meantime! 😉 I haven't received any mail from you yet, though. 🫣
@@CanWeFixThat i send it to markus@canwefixthat.com maybe in the spam fodler?