Видео

Hi! Do you mean it was used at a beach and entirely covered with sand?

Hi! Have you seen one, or are you more or less thinking that there is a fuse?

@CanWeFixThat yes i saw one, i can send a picture if you want

@blizzer44, I assume it looks like an SMD resistor or something similar. If so, I recommend using hot air to remove it and solder a new one with a fine soldering iron tip. If you only have a soldering iron, I would use a big solder blob covering both pads to desolder it.

@CanWeFixThat do you have a link to order a new one?

@@CanWeFixThat the resistance is made of glass

I really appreciate your compliment! It means a lot to me to hear that my skills are recognized 🫶

Thank you so much! 🫶

Hi! Yeah, in retrospect, I see it exactly like you. ;-) I would do it differently these days... 😉✌🏻

Glad it helped! Merry X-Mas! 🙌🏻✌🏻

Hi! You need another board to trigger a specific voltage: A USB-C Trigger Board; you can use it for a particular voltage inside the USB-C specs. If this topic is interesting, could I make a video about it? ✌🏻

Hi Sebastian! I thought I lost you 🫶 Great to see you! ✌🏻Happy xMas! 🎄

@@CanWeFixThat happy xMas🎄

Hi Bernd! Thank you very much for sharing! You are welcome. Your guess is right! ✌🏻🤓

Please take a look at my recent videos; in the video description, you will find a bunch of Equipment I am using, including the soldering iron. ✌🏻

Thank you soooo much! 🫶

Yeah, you are right; I have seen a Parkside Rotary Tool that has a USB-C Port but only charges with its own 13V charger 🤯

​@@CanWeFixThatI have a rechargable flashlight that doubles as a power bank, which is cool! Unfortunately it requires the bundled power adapter to charge which makes it almost useless to me

Thanks for sharing! Have you found any other side effects? ✌🏻

Hi petr! What exactly is broken? ✌🏻

Hello, the path to the analog stick is damaged, exactly the X axis. It does not move straight when moving. It only works up and down in the Y axis. I need to stretch the path to the analog, but I don't know where. Right analog X axis 😢

Do you mean the analog stick is drifting on its own?

Hi edo! Unfortunately, there is no direct spare part website for the mainboard. I got mine after a support marathon you can watch in this video. 🙈

Hi dmo! You are welcome! I think my initial problem was just the USB-c connector. It seems that Sony uses non-standard USB-C connectors for their controllers where the pins inside are routed differently, which causes me all the headaches! But you are right; soldering these chips, etc., is at least intermediate, and with an old soldering iron from the 80s, it is nearly impossible to do such work. But if you are interested in learning soldering, I would recommend this video of mine: ✌🏻⬇️ ruclips.net/video/2gkLmnuPV-s/видео.html

Hi Stefan, thank you very much for this information! Have a good weekend! ✌🏻

Hi Steffen, do you refer to my Bluetooth mod?

@ yep, exactly! I also saw a wireless charging mod in a Reddit forum, so I would be interested in your opinion if both would be possible on the same SP

@steffenklumpp Do you have a link to this mod? In general, I think it’s possible - it’s just a matter of getting everything to fit nicely inside the case. 😁

Yeah, I think the time has come for the components, like the caps, to just have enough fatigue to cause malfunctioning. ✌🏻

Yeah, you’re absolutely right, and I LOVE ChatGPT. Thank you so much for the advice! Sometimes I’m so deep into an issue that I don’t even think of ideas like this. 🤣✌🏻

Hi, unfortunately, yes, because the layer for the pencil is inside the screen, and to my knowledge, there is no way to repair this.☹️

What exactly comes to your mind? 😁

@ I’ve seen a creator build an mp3 player with an Arduino board, with an lcd touch screen. So I wondered if that arduino build is slim enough for a gameboy SP. emulating or its own UI. A mp3 playboy sp. lo and behold, a video on a Bluetooth gameboy sp.

@__knull6554 That is a lovely idea! Could you give me the link to the video you mentioned? I will have a look! ✌🏻

Hi! Why do you believe this is a fake Dyson hairdryer? 🤔

Hi Christos! Do you mean a classic Game Boy Advance - not the SP version?

​@@CanWeFixThat exactly!

@@CanWeFixThat absolutely yes, I really wanna install Bluetooth on my Gameboy advance, and the few videos I've found all use the v1.4 module... I can no longer get my hands on one, I only have the v1.7 !

@ChristosPanagoulopoulos What exactly is not working? Do they have other pin-outs?

@@CanWeFixThat I can't get it to turn on, my guess is that the 1.4 version can operate with less voltage, while the 1.7 is more strict on that matter. So I guess my question would be do you know where to get a reliable clean 5v from the motherboard!

Hi Michael, have a look at this video: ruclips.net/video/eghzHk-_Zuk/видео.htmlsi=HPnVP-xeT76jB5EV | How to FIX a MISSING Solder Pad (Easy) I used them again and linked them in the video description. ✌🏻

Thank you for your kind words! I'm thrilled that my video helped you fix your PS Vita. Why is the channel going wrong? I can't tell; maybe they made a mistake in the schematic, which stressed the component so much that it failed partially. But his is just an assumption. ✌🏻

Hi! Unfortunately, I don't know. This was the only time I had worked on a PS Vita, and I stumbled upon a known hack. I thought it would be nice to share it with the world. ✌🏻

Aww, thanks! You just made my day! Glad you liked the vid! ✌🏻

Haha, so true! It’s like surgery but with fewer complications… mostly! 😁

Give it a try? 😉

At least me. 😁✌🏻

It is at least worth a try; it is not permanent and can be removed without hassle. For slight scratches, it works best; they will disappear completely. At least, this is my experience so far. ✌🏻

Thank you so much for your feedback! It's always great to read that a video was helpful! ✌🏻🙏🏻

Steve will kill me 🤪

Hey! Yeah, in the meantime, I think the controller would be back in business with a genuine connector or at least a compatible one. I have another one lying around with a damaged connector; I could retry this….

@@CanWeFixThat you definitely could! It's a shame these identical ports are even on the market if they do t work. I did order the other ports "originals" and people say that they work but will they also work for this version? The ports are clearly different but at least we know that these fake ones dont work. So if you have the same port on donor board than I'd definitely go for it :D

@AA-xm7rt I got a hint from a user who told me that a specific unofficial connector would work; this would be something I could check out, having them lying around for some time, but I have no clue if this is still an interesting topic. ✌🏻😁

@CanWeFixThat yes but you could do it for the sake of knowing :D I also ordered all the ports avaible 2 days ago xD

@AA-xm7rt I will! 🙌🏻