My DIY Cable Lifters? How I Changed My Mind About HiFi Audiophile Speaker Cable Lifters
HTML-код
- Опубликовано: 2 июл 2024
- I made DIY Hifi Audiophile speaker cable lifters for myself recently. This is my subjective non-scientific experience and story of encountering this in the Audiophile hobby.
Links to products in this video:
Pot holder cable lifters (non-affiliate): www.aliexpress.com/item/10050...
Isolation pads (affiliate) amzn.to/3R7UKZm
Inakustic Cable Lifters (non-affiliate): www.in-akustik.de/en/cables-a...
related videos:
I Tried Out High-End Audio Cables That Claim To Be Built With Science: • I Tried Out High-End A...
Scientist Finds Measurable Difference in HIFI Audiophile Cables ! PROOF: • Scientist Finds Measur...
Hi-fi BLIND A/B test - Super Expensive vs Cheap Speaker cable !: • Hi-fi BLIND A/B test -...
Support on Patreon: / jayiyagi
follow on Instagram: / jays_iyagi
follow on Facebook: / jayiyagiofficial
Follow soundstage take 2 reviews: • Jay's Soundstage! reviews
My Daily Components (All Tested And Proved To Work in Blind Tests)
Fancy speaker stands I use: shop-links.co/choe8oQHC9w
Speaker stands I use (budget): amzn.to/3ssRhI3
Desktop Speaker Stands I Use: shop-links.co/chofc1R7mpT
acoustic panels I use: ua-acoustics.com/
acoustic curtain: amzn.to/31d1zAM
my fav hifi tweaks: (Isoacoustics devices) amzn.to/3j5FGvM
Speaker Isolation Feet I Use: shop-links.co/choffy3csSK
Turntable Isolation I Use: shop-links.co/chofgeNORJP
Component Isolation I Use: shop-links.co/chofhTC3wc7
0:00 Disclaimer
2:00 First Experience with Cable Lifters
4:45 Cable Lifters Did Not Make A Difference
4:57 Cable Lifters Made A Difference part 1
5:31 Cable Lifters Made A Difference part 2
9:08 High-End Inakustic Cable Lifters
10:28 DIY Cable Lifters
13:28 Will it work for everyone?
#audiophile #hifi #soundsystem 
Развлечения
![Eminem - The Death of Slim Shady [Album Trailer]](http://i.ytimg.com/vi/X0HIrS6kUYI/mqdefault.jpg)
*Hey guys, thank you for stopping by to hear my experience, journey, and story in Audio. I would love to hear about your experiences as well in the comments. However I would like to keep the comment section a civil, safe and positive space; All snake oil comments and/or non-civil negativity will be filtered and deleted. Thank you for your understanding*
*edit: I noticed that some are commenting that I proposed "microphonic" for a reason to use cable lifters. I apologize if the communication wasn't clear; I DO NOT know the cause for my experience and all reasoning are speculations at best based on my experience, I am merely sharing them. I am not suggesting it is microphonic or any other reasons as to why I hear a difference. It is a fact that microphonic is in consideration with many market cable lifters and thus why I decided to add sorbothane to my lifters but the primary reason for using sorbothane was for it to stop slipping around and help me better route/organize the cables.*
Links to products in this video:
Pot holder cable lifters (non-affiliate): www.aliexpress.com/item/1005001792662246.html?spm=a2g0o.cart.0.0.39e938dahMYazH&mp=1
Isolation pads (affiliate) amzn.to/3R7UKZm
Inakustic Cable Lifters (non-affiliate): www.in-akustik.de/en/cables-and-accessories/speaker-cable/accessories/reference-cable-base-00719223-ls/?no_cache=1&cHash=1d813cb6a390734f1a1fd2630eeb980e
0:00 Disclaimer
2:00 First Experience with Cable Lifters
4:45 Cable Lifters Did Not Make A Difference
4:57 Cable Lifters Made A Difference part 1
5:31 Cable Lifters Made A Difference part 2
9:08 High-End Inakustic Cable Lifters
10:28 DIY Cable Lifters
13:28 Will it work for everyone?
related videos:
I Tried Out High-End Audio Cables That Claim To Be Built With Science: ruclips.net/video/xzoDNh5XYVY/видео.html
Scientist Finds Measurable Difference in HIFI Audiophile Cables ! PROOF: ruclips.net/video/a4R6I_TtKQQ/видео.html
Hi-fi BLIND A/B test - Super Expensive vs Cheap Speaker cable !: ruclips.net/video/HJGw8zwx-6g/видео.html
Support on Patreon: www.patreon.com/jayiyagi
follow on Instagram: instagram.com/jays_iyagi/
follow on Facebook: facebook.com/jayiyagiofficial
Follow soundstage take 2 reviews: ruclips.net/p/PLPOzvlhtSqn5xdc__ftuSt4Rxy_wm5Af0
*My Daily Components (All Tested And Proved To Work in Blind Tests)*
Fancy speaker stands I use: shop-links.co/choe8oQHC9w
Speaker stands I use (budget): amzn.to/3ssRhI3
Desktop Speaker Stands I Use: shop-links.co/chofc1R7mpT
acoustic panels I use: ua-acoustics.com/
acoustic curtain: amzn.to/31d1zAM
my fav hifi tweaks: (Isoacoustics devices) amzn.to/3j5FGvM
Speaker Isolation Feet I Use: shop-links.co/choffy3csSK
Turntable Isolation I Use: shop-links.co/chofgeNORJP
Component Isolation I Use: shop-links.co/chofhTC3wc7
Thanks for the the aliex links friend.
So, if I disagree with you, you won't let anyone see my comment?
@@ScottGrammer of course not. There’s a difference between disagreeing with me and trolling/nasty comments.
@@Jayiyagi Then why did you delete my comments? 🤣
@@bubbelchampagne I wouldn’t know. It’s done by a 3rd party. What was your comment?
They don’t make many mistakes so your comment might have been what I described.
Not sure what’s more crazy, cable lifters, or the fact I just watched a video about cable lifters 😅
depends how far you made it through the video
Or the fact that I read your comment and reply to the lifter-nonsense. 😅
Both we are retarded thinking this works. lol we are humans with shittest hearing and as we get older our hearing gets worse. We pay more for nostalgia lol get a hearing test and see what you can actually hear
Even crazier is the fact that you didn’t try with your ears (or did you?)
try painting them pastel colors it makes a huge difference, start with a red shade closest to the amp then orange, yellow, green, blue, ect as you get closer to the speakers,
What? everybody knows that you have to go backward through the color spectrum to lower the interference! JK, I may be not sure they work, but I do know it makes for a cleaner presentation than just having them strung on the floor.
There is another reason to have them. A Stick vacuum slides neatly under them. That is a win.
Love such content Jay. Pls continue to make such unique content!
I love the evolution of your videos.
I bet Amir will love this one. All kidding aside, really enjoy watching your videos. Your Denafrips Terminator + & Holo May video helped me make a big decision!
Jay, I am only two minutes into this video, and I want to give you kudos already for your intro. Your sincerity shines through the screen. Just wanted to let you know that. Good topic. I'm curious to know your observations, so I'm off to watch the rest of your vid now. Cheers! :D
Thanks again, This was another great video. I liked the differences in flooring and in the cable insulation that made a difference. I love the way you explain things and their differences. Thank you, again!
Love your DIY cable idea and specially the part where you talk about your observations on when it did or did not make a difference.
Great idea. Thanks Jay, for sharing your various experiences.
Awesome, thanks Jay! It's nice once in a while actually to be able to *AFFORD* something that you recommend 😁
My snake oil idea is that directly twisted joined crossover components sound better than soldered crossovers. 😅 I heard a difference. Soldered joints sound brittle in comparison.
I use cable lifters, whether they make a difference is debatable. They were cheap, $135 bucks for 10 lifters, and they do make the system look better from as aesthetic point of view. If there is any difference, possibly a smoother sound with tighter imaging, the improvements are very small. But it doesn't matter, providing you don't break the bank with them, why not give them a try, it is not going to hurt!🙂
,
Smoother sound with tighter imaging? 🤣
If it makes a difference to you then you do you. I don't know why ppl get upset about these things, its not being forced on them. Just enjoy what makes you happy.
The reason why people get peeved is because other 3rd party people can market it for profit and spreading misleading information.
Interesting video Jay. They certainly improve the aesthetics. I’d consider trying this. I’d certainly not belittle your experiences as they’re yours. If you hear a difference then that’s what matters. Some cables do seem more microphonic than others and a hard floor is likely to pick up much more noise than carpeted, so there’s probably something in this.
Cable lifters are ridiculous if you ask me. I do believe keeping cables away from each other can cut down on magnetic interference, but decent cables should prevent that problem. Never bundle your cables would be good advice. I tried lifting my cables last year and heard absolutely no difference, but I did feel like a fool. 🙉🙉
I tried this (cable lifter with some Jenga pieces) with one speaker (left) and did an A/B comparison with the right speaker and measured before and after with REW. I had my wife and two teenage kids participate too and did not tell them what I had done. Everything level matched playing the same content and test tones. I could not tell a difference. Measurements unchanged. My wife thought the left speaker (Jenga) sounded slightly better and my two kids picked the right one (non lifted). I think it had more to do with the room and their seating position than anything else. It is what it is, you be you.
Believe your wife. Women (in general) have better hearing.
I even lift my headphone's cables to not make contact with anything :)
"Do you even lift your cables, bro?"
I think Danny imprinted on Jay, GR-R cables with the rope inside them, now cable lifters! Next Jay is gonna say “Hey Everybody” “say no to cheesy parts”
... damn sand-cast resistors ...
SonicCaps 👍
And what would be wrong with that?
Great to use some of Danny's wisdom and experience that can not be measured but can be heard ...
@@pkats9093 nothing wrong, I also follow Danny’s doctrine.
Very very cool, very very interesting! I have a co-worker that gave me his Fisher STV-649s and I have placed my JBL L112s on top of them so my speaker wires that I made custom myself using 12 gauge wire are already 3 ft off the floor.
Jay , please specify how and where audibly sound got better , please be detailed ....
And here I am with my speaker cables going through the attic for my living room setup wondering if it is affecting it somehow even though I am not using expensive cables.....
An even quicker & cheaper way to try this is to use the cardboard tubes from toilet rolls. Just quash one end, cut a V with scissors and then restore the tube shape. I tried these for the first time when friend was visiting, and we were both amazed that we heard a clear difference. If you try it and hear the difference too then you can find a more elegant solution - but to check the concept toilet roll tubes work just fine.
If you used the whole toilet roll would that help absorb ground borne vibrations ? 🤔👍
Thanks for the video, if you said a good shielded cable makes cable lifters have less of an audible difference, does that mean those shielded cables alone sound similar to the nicer cables you use,
and would it be better to just get shielded cables for majority of users out there without perfect setups?
Hey Jay,
What about two elastic bands on your wooden "lifters" pot holders 😉 to do a top isolation like the metal design.
Good idea, I will try it as well. Not sure about the results, too much dampening in my experience is not good, but the results could vary depending on the strength of the rubber bands as well.
Jay, a face of sincerity in your story that absolutely motivated me to try it (I had been considering it for a while). but what motivates me the most is that when you can't change your gear every now and then, going for small significant positive changes is the point.
I'm with you here.
I think cable raisers make a difference. Makes your system look cool and makes your uneducated friends think you know about audio even that makes no audible difference.
I see the Inakustics and think hair bands! - A circular(if poss) base, two upright dowels with a notch and a hairband crossing the gap - some refinements to be had though I think this could be a good start.
Great shirt, btw! I want one of those! More than I want cable lifters. 😀
Your best play would have been to cut two thin strips of the Sorbathane adhesive strips across the top of the brackets, creating a hammock for the cable. Give it a bit of slack…this will “float” the cable more effectively. But as you said, the cable you are lifting is critical, so many have shielded cables…it looks like in this video, you’re running very similar cables I am. Lifters definitely make a difference.
You keep doing what you think is interesting. Thanks for your ideas and comments.
My Rotel-RMB100 mono blocks are right underneath my NHT SB3 so the cables don't even touch the ground. it was still an interesting watch, have a great day.
I love it..you're going down the deep deepest deepity-deep wormhole of the audiophile black-box...and I'm here for it. Because the super dooper high money audiophiles all use lifters! I need to understand why they do...and I'm glad you're covering it
Great story. Now i want to try cable lifters 👍
🤗👍😎THANKS JAY …FOR SHARING YOUR STORY 🤔 we are here to listen 👂 and learn 🧐….just ignore the critics 😅💚💚💚
15:20 hmm, I kind of thought it might have an effect with carpeted floors, being static electricity is introduced. During the winter months (not summer) static builds on my carpet in the basement. In fact, I got zapped a lot with my Willsenton amp anytime I touched the on/off knob. I've even added some rubber around it to deviate from the static potential.
I was thinking of experimenting with lifting the cables. Having a dropped ceiling I was thinking of possibly hanging fish line to support the cable off the ground away from the static in the carpet to see if there was a difference; maybe I'll try risers if this works.
I saw and heard a system at a friends house where the cables were suspended .......we did not undo to compare but it sounded nice and without stress ..........even the interconnects were floating and he told me it made a difference in the good way to the music.......
No scientific proof as do so many other things in life make a difference without scientific proof !!!!!!
BUT science grows out of what is OBSERVATION !!!!!!!!!! ....we often do forget that and as so many still believe that .....and state that when it measures the same ........it sounds the same..............resistors, amplifiers, capacitors, integrated circuit boards, interconnects , connectors etc................We know that NO different component does sound the same as long as the electronics are capable to express these differences .............changing a transistor or a tube does indeed not make a big difference or even not at all in a highly processed circuit mass produced and with a lot of FB loops...........but that is not our way of experiencing our passion, the simpler the system , the less processing ,the more only ONE component change will make an audible difference ...... by revealing the flavour of its sonic caracter , just like the cuisine of a chef cook , all is in the synergy and the right amounts of the spices he uses and mixes.........versus the uniform and standard with the taste processed food of mass consumption fast food from MC Donald .......
I put pipe insulation round my cables, and damping where they connect to the speakers. Seems to help a bit.
I bought air-tight rubber balloons that don't deflate, filled them with helium and tied them to the speaker cables with non-vibrating string. The result is incredible, as if the entire audio system has disappeared.
@Jayiyagi
What size pot holder did you order? Small or Med?
Cool idea using those pot holders for cable lifters.
Love the T-shirt🤘
Hi Jay and guys - it looks to me like the cables you're showing here are the GR Research - that's a good sign! I'm using Kimber Crystal 24 and have them lifted on home-made oak 7" or 17cm lifters and must say, I heard a big difference. Faster transients, more energy in high top end, better instrument definition ans soundstage.
My floor is concrete with oak parquet. In the floor are water tubes for underfloor heating. Also of critical importance is isolating the speakers from the floor.
I'm toying with the idea of getting GR Research, either as main cable or as a biwire option. For the length i need it would still be quite pricey though so i'm hanging back. I dont know what improvement if any i would see over the Kimber Crystal 24. Construction-wise I think only the cotton rope and the RAM distinguish the GRR from the Kimber. Does anyone have any experience of this comparison? All the best, Rob in Switzerland
Interesting stories. Great DIY fix!
Try separating the plus and minus into two separate cable runs and hear a huge difference!
I just pot foam under my speaker cables and it seems to have made a difference. Early days though, need more testing.
I just touched my speaker cables with music playing, and you can clearly feel the vibrations. They need damping as well as lifting!
I still dont know much about cable lifters. Are they only for speaker cables because most are not shielded? Or can they be used for power cables and interconnects too? Also how do I manage long cables in a small space?
I want to share my experience and I want you to just try this:
Get a pair of 5" Tang Band or Fostex or any other good single drivers. Make a tower box and make a speaker hole near the top of the box for the single driver. Before mounting the driver put this in the speaker hole, a 5" diameter piece of tubing (poly pipe) 2" long (it's more a ring than a tube). And glue it in the speaker hole (like a short bass vent tube). Mount the single driver about 20 mm (3/4") above the speaker hole so there is an air gap between the driver and the speaker hole. Use oversize screws and use soft thin sprinkler hose for spacers (around the screws) and compress the hose a little with the screw to secure the driver. Make the acoustic gap between the driver and the box a bit smaller at the top of the driver so the driver is tipped up a little when mounted. A crossover filter is an option that I made but it's very subtle cos the acoustics does most of the EQ (but I like perfection so I have a filter). You will hear a vast difference with the semi open driver to a regular close driver mounting for sure (and in a good way, I reckon and others who heard them reckon). And you might love the difference! So please try it cos to me it's at another level! I want to share this (not repress it like innovations seem to, through copyright). I hear voices in my room that startles me cos I get tricked into thinking someone is in the room when it's in my speakers. It happened several times (lost count). I actually physically turn around when that happens. And sometimes I have to turn it down to find out if a sound is coming from outside or from the speakers. Once I heard a loud low passing jet aircraft and I looked out the window and there was no plane and I was still searching out the window while my speakers were less than a meter from me. And it took several seconds before I realised the jet was the speakers (even when they were that close to me). If this is true (and you love sound) then you would be a mug not to try it. Especially when it's about as cheap as your made cable raisers. And I get so much enjoyment and amazing emersive experience from the semi open, semi dipole speakers and I want to share this experience (not suppress it). They absolutely smoke my reference speakers (B&W 706s) with female voice, piano and brass band. I lent my speakers to an audiophile friend and I asked him 2 questions:
Do they sound "different"?
And he said yes.
Did you like the difference?
And he said yes.
I would really like to try this. A picture would be great. You say make a 5inch hole at the top of the box. Glue in the 5inch pipe/ring and then mount the speaker 20mm above that. So the speaker does not go in ‘the speaker hole’? Sorry I may be a bit thick.
@@raywatts7689 the speaker is spaced away from baffle, but mounted in hole, so it's a leaky speaker.
This sounds interesting, need to try out, Thanks for sharing your Knowledge.
I am wondering if it would be better if you wrapped some fine threads across and let the cable rest on these fine threads. Just a thought.
I use little 3" high blue/grey plastic risers from home improvement stores that are rebar risers for pouring concrete, super cheap and work great, get a bag of 20 for a few bucks, circle based tripod shape with a open half circle at top that holds cables perfectly, plastic is also non conductive like wood and ceramic, if wanting higher than 3" just use a kids wood block underneath but 3" is fine by me, made a very small improvement over my wood floors for little cost.
Hey Jay? No matter what you had fun and that’s all that counts. Have fun in the hobby
Love the lifters, hey if they can make a difference.
It’s great how people get so upset at someone pursuing their hobby and using their own money to do so 😂
interesting results. I wonder if you have the opportunity to do some C & L measurements with or without lifters? There was a posting a few years ago and this guy had a floor that increased the capacitance of his cables so the lifter worked by reducing it back to where the manufactures design meant it to be as they said it sounded better with the lifters.
since when has any audiophool done measurements? they judge gear based on how expensive it is and how many false claims the manufacturer makes on the website
So what I'm hearing from this demonstration is that the sound of the cable changes when isolated from the floor, aka lifted. My first question would be what type of material is the floor made from. In this video I see hardwood floors. Are those hardwood floors solid wood and what is the species of wood? Or are the floors engineered hardwood? Are the other floors (your previous customers or workplace) made from the same materials or were they carpet or stone? If they were carpet was the padding underneath the carpet? Are your floors built on a concrete slab or are they laid on top of OSB subflooring? Is there an open space beneath the floor like another room or is the room first level? My point is when super tweaking as audiophiles do, you have to consider every single element involved. I heard mention of different results from different cables, which makes sense. If you believe Sorbothane helps the isolation of the cable why not wrap the entire cable in Sorbothane? Or cover the floor in Sorbothane? If a half inch strip helps that much consider how much of a difference you could achieve with the entire floor, and the cables covered in Sorbothane. I honestly don't know if lifting cables make a difference. None of my cables have ever touched the floor, only because of the design of the rack and stands limit all the power cables , interconnects and speaker cables from reaching the floor. I am very curious to drive deeper into this conversation with more data from the people that hear a difference. That data being precise about the floor and its properties. Without bringing that data into the discussion I would find it difficult to understand a certain point of view on this topic.
Keep up the great work! I love that you are challenging the audio world with these ideas.
Probably lifters can also help cables stay clean off the floor too or prevent scratching. I guess if you like to switch up cables a lot and keep them in like new condition to sell them it’s cool
you could also just use the cheapest $3 cables from amazon because the only thing audiophile cables do is drain your wallet
Definitely off a HIGH PILE carpeting, makes a difference! All that nylon blend creates much static!
Circumstances are critical. I have carpets at home and realised because my carpets were made from mixed fibres they may interfere wirh the artificial materials of my speaker cables (cable sheath). And when I used some cheap cable lifters I was surprised at the auidable impact.
This Hobby is for everyone. Have fun and experiment. Lets not keep negative comments and angry/violent commenters keep us from being on their own fun audio journey. Keep it up Jay.
Frederick
Agree, as long as people are defaulting to science and proven measurements when claiming improvements.
Jay, Which size wooden pot stands are you displaying in your video? The smaller ones? The size looks spot on.
Smaller ones
Hi Jay, I’ve been using Perspex cable lifters on my main system for decades. I believe that the culmination of many tweets add up. I also use quality cables, power filtering, isolation platforms and feet for each component and speakers. This works for me and I can hear the difference. It’s not snake oil when you have a highly resolving system.
My speaker cables are 2 feet long to my mono blocks and they don't even touch the floor. In my case according to your theory (microphonics) these lifters would be a detriment if I used them.
Hmm potholders or Danny's tinkertoys? I love when chooses don't cost an arm and a leg.
So much electrically charged dust settles on the floor 24/7. The audio cables' sheathing and emi/rfi insulation fight these charged dust particles, yet errant charges vector thru these insulations and introduce noise which show up reducing the music's innate joy!
Completely 👍🏻, Jay!
I had my son print some for me with his 3d printer but my first test was with toilet paper tubes. I can hear a difference (minor) but I can't tell you if it is better for worse... Just a little different. Results can be adjusted by how much of the cable is suspended. Also, most of your theory was around vibration but I have read it may be capacitance is the change. Some designs say you ideally need about 3" of lift. Someone should be able to measure this to validate.
Do power chord also need a lifter?
When hifi becomes an obsession. Just put music on and listen to some music After all that's what it's really for. Audiophiles is a name for obsessive music, mechanical & audio behaviour. Listening to your favourite band should be the core of hi fi users. Maybe some ear bud cleaners as a cheap upgrade. If you want get your cables off the floor tack them to the skirting board.
can we just use toilet paper rolls for lifter? run the cable throught the center it almost act like an extra choke
it also sounds like a fun project.. but also sounds like you could get a carpet instead.. good video man!
Hi Jay, I watched your video on cable lifters. I'm putting on my speaker wire pool noodles, it was just to make it look good. I wonder if these pool noodles would do the same effect. I know it won't do anything for me because I don't have a dedicated theater room. If you would like to know about my experiment with speaker wires. Let me know.
Wow !
Jay, have you ever tried the Doug Schroeder method of using two cables per channel?
That would make for an interesting video.
If anything it makes your cables look uniform and neat in an open room setup.
Cable lifters make a little more sense when you understand electricity flows thru magnetic fields. It could be that the cable being on the floor effects the magnetic fields, lifting the cable off the floor could make these fields more even around the diameter of the cable. This would make sense that cables with less shielding see better results with the lifters.
Excellent
I use doll parts from thrift stores... functional and great conversation starters.
Awesome video!
Where’s Thujan?
How do Roomba's deal with cable lifters?
Well, do you know what's better than cable lifters? Monoblocks as close to the speakers with minimal or no external wiring. Or self powering bi-amp or tri-amp speakers.
If you heard the difference with cable risers, you'll be in for a treat if you use a wire only 10/20cm long.
Hi Jay. I’m a believer of cable lifters and just wanna share my experience and 2 cents worth of knowledge. You are right, cable lifters don’t have to expensive. I would say that the main thing is to use ONLY wood and preferably maple wood. Actually any wood would suffice. Importantly is to achieve 6 inches off the floor. You can try WITHOUT the insulation pads and lift it at least 6 inches. Silk threads (from wall or ceiling) to suspend the cables would even be better. You can try when you are free ! Thanks.
Thanks!
Thanks Heathaze !
Hey Mate, have you had much experience listening to Dynaudio and what do you think of them ? If you have some done reviews then I would be keen to check them out. - thanks
Well, I'm on the fence with cable lifters and I decided to use rebar chairs. They come in different sizes and are dirt cheap. Grip-Rite brand at Home Depot, $6.10 for 20 pcs.
I would like to try different designs using a 3-D printer. I was thinking about buying one anyway.
For anyone who wants to see if cable lifters make a difference in your system. A completely free way to try, is to use a rubber band and 3 chopsticks to make a tripod.
If you build a few and set them up and they make a difference then you can invest in something nicer. If they don't work in your system then you aren't out anything but the 5 minutes it takes to assemble and set up. I hope this helps someone.
🤗 assuming you have chop sticks and rubber bands on hand 😁😎💚💚💚
@@budgetaudiophilelife-long5461 Yes assuming that 😊
My cable lifters are tables,should I buy branded lifters to put on top of tables?😅
You should buy little tables made for doll houses to put on top of your tables! 😀
I just think they look cool on super high end systems and that can be enough. Personally I don’t even have cable management let alone cable lifters
I just use toilet rolls and I heard a difference😂😂😂
I'm so glad i went digital. This kind of stuff would drive me crazy. Kudos to everyone who makes the journey as long as you are enjoying yourself. Keep it up
What cables are you using? Are those the GR research DIY cables?
I make heavy use of cable massagers and cable oil as well
Make sure to dip it in. Don’t just spray it or something.
@@Jayiyagi The best cable oil is made from oil extracted from snakes
I actually use cable lifters homemade out of Jenga wood game pieces for my unshielded speaker cables and they definitely clean up the noise floor to me.
🤣🤣🤣🤣🤣🤣🤣
Why not use high quality Rugs?
Looks like the Off-White logo. Not bad 🤔👍
I tried bubble wrap to lift my speakers cable and it really makes a difference!
Holy crap! Just tried it using a couple of rooks (made of wood, weighted, felt on the bottom) and it absolutely works in my setup on wooden floors. Big step up in clarity and "liveliness", like a veil of dullness was lifted. So much so that I'm considering adjusting with a tiny bit less toe in. If I were to get this result from a new set of cables for say 10% of the price of my setup and room treatment, I'd be very happy with the purchase. And this was free! Mind blown. Thanx for the idea Jay
🤣🤣
The use of cable risers on my carpet over a concrete slab floor made a noticeable improvement in the sound of my system. I don't think the improvements had as much to do with isolating the cables from vibration as lifting them off and separating them from the carpet, which becomes part of the dialectic if they're lying directly on them.
For me personally, I believe that if your cables need lifters and it changes the sound, they're bad cables. And if all cables are improved with lifters, then that's just an inherent flaw the design of cables and the shielding/isolation they we paid all that money for to have in the first place.
Experiment with your system off the grid!