The Ultimate Guide To 300ZX Trim Replacement
HTML-код
- Опубликовано: 17 окт 2024
- As with any car the paint and trim will fade over time. Sometimes you can touch up the trim with some paint, although sometimes if you're looking for that OEM Appeal you might as well go ahead and replace them, which can get pricey! Often times the trim can become the hardest and most agitating thing to find over time, not to mention after it becomes NLA from the manufacturer!
Today I'm doing a mix of both. Well, some of my trim has already been repainted, but I'm replacing some of it as well. Primarily the t-top bar hook and the Side window mouldings!
Check out the website and get yourself some Fresh Z32/ Billy Built Merch!
billybuilds.co...
Affiliate link for the clips mentioned in this video!
amzn.to/3XBI57g
Sem Trim Paint!
amzn.to/45EuGNB
Clip part #'s
PCK-727-93
73856 30P10
T-top Seals and more Here! blasterzgarage...
Thats the ambient air temp sensor, for auto climate control. I JUST, ordered the ttop center oem for $128. Really excited.
Never even thought of that😅 it's a nice piece!
Billy, this is a very informative video. Not many 300zx trim installation videos out there.
Thank you. And buy now 99% of the Z32 's need them replaced 😅
Well Done.
After watching all this work, however, I think we can all agree that its slicktops for the win.
Bless your heart... and, good luck at the dyno.
Oh, and thanks for another video.
Slicktop and avoid most of this mess lol I'm not counting on this dyno as a tuning session. Not yet anyways. But we'll at least see how much it's making
@@Billy_Built You also need to get it on some scales.. Interesting to see the weight balance.
Best of Luck!
@@dannoyes4493 I think I may know someone who can do that for me..
New T bar looks awesome!!. That tiny fan in the map light trim is the ambient temp sensor. Most start making noise just like ours did. I disconnected ours years ago with no issues. Great Video as usual Billy!! Good info about the window trim, Definitely need to do ours soon. Keep up the great work fam. :)
Hey Billy, I noticed that on your window trims there should also be a plastic pin that locks it in place from the inside behind the door seal towards the B-Pillar side. Is possible yours have gone missing but this may be helpful for others who are replacing them 👍
Good info! That is a strong possibility as these have been removed numerous times already.
Dude!! I'm going to buy some of your merchandise so you can get a decent haircut!😂
Ahh man🤣🤣 one time I go to a different barber and this is what I get☠️
Regardless the mullets coming back😎
Blaster Z is no longer available? Did conceptz buy them out?
Heat down here has been brutal idk how you do it bro, I snagged a portable AC for the garage so I can't have any excuses lol
Also FYI the little fan you pulled out of the t top area is a temp sensor for the auto AC
Man I don't even know how I do it. Lol TBH I didn't even look at the temp sensor long enough to see it was a fan. Paid 0 attention to that thing lol
Thanks Billy
Bro! I NEED, an I'm having a dream banner!!!
Betters are a good idea. 🤔 I'm definitely going to look into that
I installed some blaster z ttop seals last year. My t-tops are nearly impossible to close and open now since it's so tight.i was hoping they would soften up over time but unfortunately they haven't
I would give them a couple summers, to let themreally break in.
Nice video bro love my z
Thank you!
Billy, What an excellent review and vid! Just straight to the point with everything! We released a portable air pump. Can we invite you to do a review? How can we connect with you?
I just did the T top bar and all the trim along the top on mine. Paid $450 after tax and shipping for the whole lot. Trying to get those clips in the correct spot was a pain. unfortunately one T Top cannot be done with the amount of rust it has inside. Been leaking for too long.
The rust in the t-tops is unfortunately common.. many don't even know it's there until it's too late. I was able to weld in some new sheet metal when I painted my car but it is not something for the faint of heart..
@@Billy_Built Yea, passenger side wasnt awful but definitely need to tear it down and treat it, was just more focused on resealing to get rid of the leaks. Drivers side itll be welding in new metal or taking another t-top and stripping it down to swap the glass since all mine has the VIN etching.
What’s shaking on the drive is it the shift knob?
The rattling sound is the shifter.
📽🏁🏁🏁📽👍
🏁🏁🏁