Damn, Evan still pumping out the good stuff. I can imagine this being a very useful modification and curious sight for drivers behind you. I certainly would notice it straight away and keep my distance if I didn't know what he done to his brake lights. I might think they were broken XD. What your plans on getting the car wrapped? I plan on doing mine next month or month after depending on the virus.
Hey I may be a little late. Which version of NCS Expert did u use? I have different labels on the buttons so it's a bit confusing when using. Especially when I check other tutorials.
So I got the cable and the programs, can you do a video on how to code the one touch turn blinkers? I wish mine flashed 5 times. I saw it on a E46 on the highway.
Evan, Great series of videos..... I just bought LED Low Beams for my '01 X5 (stock halogen) wondering how to make them stop blinking (hot check), they aren't flickering, just blink about every 10 seconds.... Thanks
Hello. I have e46 coupe facelift with manual headlight leveling adjustment (motor), but when adjusting it passenger side headlight goes in opposite direction. Is it possible to code it that both headlights was moving in same direction?
Hi Evan, this is really nice function I've been curious about it before. Tried different things from your videos and all work out but I have a problem with activating the AUX function of my e46 CD. Had a cassette before with MODE option 2004 and the current one mp3 CD 2005 both would not let me code them through NCS. The coding can not be done, the radio starts playing when trying?! Could you help?
Hi Evan I like your videos very much! I got a weird issue with my trunk lid. It can be opened by trunk release above plate and the one in the car, but it doesn't open with the remote key. I used inpa to see that the car received the signal from the key, but just no reaction for trunk lid. Any suggestions?
@@EvanGoyuk Thank you. Unfortunately, the data is not correct. I don't have ALSZ and AKMB. only EWS, KMB and IKE. BRAKE_FORCE active BRAKE_FORCE_2 active ASC3_AUSWERTUNG active BFD_AX_REF_SCHWELLE wert_01 BFD_AX_REF_SCHWELLE_2 wert_01 I should encode these parameters but can't find them. I'm sorry Hungarian so I can only communicate with the help of the google translator.
Hi Evan, Your videos helped me a lot in coding my e46 My problem is when I activate stage 3 by abs it flash always even with light braking, and when I deactivate it doesn't blink at all even with hard braking. Any suggestion?
Hi Evan! If i want only the third brake to blink when abs kicks in, what settings need to be coded?
Do everything the same as in the video just don’t set BLST1_BLST3 to active
did you make it ? just the third brake light ?
americans trying to pronounce german is always funny
great channel i just got an 05 e46 sedan and loving it. would like to try this, but going to wait and decide after my led brake lights come in.
Damn, Evan still pumping out the good stuff. I can imagine this being a very useful modification and curious sight for drivers behind you. I certainly would notice it straight away and keep my distance if I didn't know what he done to his brake lights. I might think they were broken XD. What your plans on getting the car wrapped? I plan on doing mine next month or month after depending on the virus.
I would love to get my car wrapped but I need to find m tech bumpers first
Hi, is this possible on non LED pre facelift coupe? (2000)
Hey I may be a little late. Which version of NCS Expert did u use? I have different labels on the buttons so it's a bit confusing when using. Especially when I check other tutorials.
So I got the cable and the programs, can you do a video on how to code the one touch turn blinkers? I wish mine flashed 5 times. I saw it on a E46 on the highway.
Evan,
Great series of videos..... I just bought LED Low Beams for my '01 X5 (stock halogen) wondering how to make them stop blinking (hot check), they aren't flickering, just blink about every 10 seconds.... Thanks
hey Evan, do you have any idea if the pre-facelift model e46 m57d30 has this option?
Hi Evan! Can I code this even though I have ASC instead of DSC? Great tutorial again!
I believe so
so what is the difference between stage one and stage 2 ?
stage 2 is just brighter?it is hard to tell from the demonstration
Stage is just standard lights. Stage 2 is where the inner lights up on braking then when you brake harder the outside part of the light turns on.
*stage 1 is just standard lights
Hello. I have e46 coupe facelift with manual headlight leveling adjustment (motor), but when adjusting it passenger side headlight goes in opposite direction. Is it possible to code it that both headlights was moving in same direction?
Yes
Is it also possible to code the hazards to turn on after an emergency stop?
I don’t think so
Yes it is!
@@justinvanarragon do tell how :)
Hi Evan, this is really nice function I've been curious about it before. Tried different things from your videos and all work out but I have a problem with activating the AUX function of my e46 CD. Had a cassette before with MODE option 2004 and the current one mp3 CD 2005 both would not let me code them through NCS. The coding can not be done, the radio starts playing when trying?! Could you help?
Dm me on ig @evangoyuk
Hi Evan from Greece.
I have the same problem with an cassette radio 2001 .
Please help me!
amazing job!!!
So if I want the brake lights blink everytime I brake, what parameters would I change?
change the line under BFD_SW1_STUFE3 to aktiv
Hi, is this works with aftermarket led lights?
I think this only works with factory LEDs
My Build date is 2/2001 - No BFD possible on my car?
You may need a new ALSZ module
Hi Evan I like your videos very much! I got a weird issue with my trunk lid. It can be opened by trunk release above plate and the one in the car, but it doesn't open with the remote key. I used inpa to see that the car received the signal from the key, but just no reaction for trunk lid. Any suggestions?
The solenoid is dead dude..
So is it possible to code led tails from halogens with Carly or only NCS?
Ncs expert
@@EvanGoyuk much appreciated
does your car need to be certain year? mine is 2002 lci.
Nope it will work!
@@EvanGoyuk cool, I already coded US lighting this looks fairly straightforward. Great tutorial Thanks!
Hello
the encoding is the same as e39?
THX :)
I am unsure but give it a try!
@@EvanGoyuk Thank you.
Unfortunately, the data is not correct. I don't have ALSZ and AKMB. only EWS, KMB and IKE. BRAKE_FORCE
active
BRAKE_FORCE_2
active
ASC3_AUSWERTUNG
active
BFD_AX_REF_SCHWELLE
wert_01
BFD_AX_REF_SCHWELLE_2
wert_01
I should encode these parameters but can't find them.
I'm sorry Hungarian so I can only communicate with the help of the google translator.
Hi Evan,
Your videos helped me a lot in coding my e46
My problem is when I activate stage 3 by abs it flash always even with light braking, and when I deactivate it doesn't blink at all even with hard braking.
Any suggestion?
Did you find out? I got the same issue
Hello Evan.
Can you tell us how to change the service interval ?
Yes dm on IG @evangoyuk I have to find the parameter
@@EvanGoyuk it's very easy with Pa soft. Just choose the IKE, then recoding, then click on the 25000km interval and change it to whatever you want to.
what’s PA soft
those license plate lights are way too bright
Do you know if I can do the same on Mercedes w169 from 2005?