VersaTube Frame Assembly By ONE person
HTML-код
- Опубликовано: 30 сен 2024
- VersaTube frame assembly by ONE person. Yes, it is possible to assemble a basic VersaTube shelter frame by yourself!
This short video shows how I installed uprights and top sections by myself. This is a 12' x 18' x 7' frame (2" x 2" tubing) that is the basis for carports, garages, or workshops.
The bottom baseplate was laid down and secured with the rebar anchors provided in my carport kit. I squared it up by measuring the diagonal dimensions (259.5"). www.omnicalcul...
In my case, some of the tubes had inside burrs that needed to be filed down to allow the swaged ends to easily slide in. Check for this problem before you have tubes in the air and you can't slip one into the other!
Dang. When l saw the thumbnail l thought l was going to see an old lady do it.😂😂😂
I used your idea to put up a 22 x 22 x 8 carport. I used tied c-clamps onto third hand support poles onto the 7 ft right & left pieces. I inserted the 8 ft center pole in the middle. Then I ran tie straps across the bottom & over my head to pull the top together & align the sides w a level. Afterwards, I hung a 32" tie strap on both sides so that I could insert my 14 ft brace on one end. I climbed a ladder w the other end & hung it. My frame would have been a back breaker for 2 people. I did it myself & my back feels fine.
That's how you do it!
I put the base together and the frames on the ground. By brother is coming this weekend to help me with the the fully assembled onto the base. Using this carport to make a greenhouse. Figure it's the best way to build a greenhouse from the ground up.
Great Job! Will you be doing an update video?
This project will be completed in the spring. I anticipate installing the panels by myself too. It is a "carport" unit so there is only the top and a foot or two of paneling down both sides.
@@k0rc I'm looking forward to it. Thanks for the response, stay well!
still happy with the versatube shed ? Do it again ?