THANK YOU for a clear and detailed view of the actual board and its features. It is amazing how difficult it is to find a channel that does this without a lot of nonsense.
Thank you for this. I just bought this board and I'm going to be doing my first build in over a decade. This is exactly what I was looking for to make sure I place my 16gb of ram in the correct slots
I just bought this board for a Ryzen 5 3600 build. I narrowed it down to this board or the Gigabyte X570 Aorus Elite ATX. It was decided on the basis of the PS/2 connector, since I have a number of brand new IBM Model M Compact Keyboards that I like to use. Have not yet built it . Got a Meshify C case for it.
Help asap. I have just build a new pc with same mobo and 5900x i cant find a 4pin cpu power connector. No signal coming to the monitor. Do u need the 4pin to power up a 5900x ?
Had to send mine back. It would post, but not enter the bios. I guess there's a lot of failures with this mobo that the hardware on box channels won't talk about.
This is great this is everything I wanted to know pretty much. Dang I love the way you go over each thing in detail. I got to get back to watching Rush that video now. Ohh I almost forgot. I have 5.1 surround sound speakers that I use for my computer. I read something in the manual on that one that you're reviewing right there it says something about eight channels. I'm not sure what eight channels is. I just want to get my speakers and everything hooked up correctly so I was wondering if I will need another sound card for this motherboard to make my Logitech 5.1 surround speakers work properly?
@@FaRKle0079 Hello I am curious I use Corel VSP EDITOR. Which editor are you using I'm just curious. I found a glitch that I discovered. This is why I asked which editor you're using. Thanks Keith
I have a few questions from reviews I've seen on this motherboard. Does your xmp/docp run normally and people say the LED lights stay on is there a way to disable that and also does it make you install armoury crate.
I had no issues running my G.Skill 64GB (4x16GB) 3600MHz kit using XMP/DOCP. I just set it and it ran fine. You can absolutely disable the LEDs. If you don't want any LEDs at all, there's an option in the BIOS to set Aura to "Stealth Mode," which doesn't require an Armoury Crate installation. If you want LEDs when the computer is on, and them turned off when the computer is off, then you need to install Armoury Crate and set the shutdown behavior of the motherboard LEDs to off.
I'm planning to put a 3950X and 3090 in this board. I used PCpartpicker and it looks like everything is compatible. I just hope I don't need to flash the board. This will be my first build too, and probably last.
does the pro version have the same port locations? My x570 pro (wifi) doesn't have pins in the front panel USB 3.2 port. 1:28 and why did you say 2.1 but then wrote 2.0?
Very informative! I am currently waiting for my parts to arrive. I am going with a 3600 paired with a 2060s. I have a question. I bought this motherboard on Newegg and the reviews aren't looking nice. They said that in order to install windows you have to disable the WiFi in the BIOS. Did you do any of this? I am going to install windows via flash drive with media creation tool.
Congrats on the new build! I had no issues installing Windows 10 from a flash drive without doing anything special in the BIOS (like disabling WiFi) or updating to the latest BIOS version.
bought the ASUS TUF X570 Gaming Plus (WIFI) last year NeweGg never been able to register the product with Asus . error trying to register Asus Motherboart keeps telling me incorrect serial number . also look the bios page this motherboard 2 yrs about 25+ bios updates try to fix one problem and get another problem to replace it
I just got a new psu and the 4pin connector was confusing to me, for the opposite reason of other's. This is my first psu that did not have it for some reason.
You mentioned that you don’t need the 4 pin CPU power, just the 8 pin. My PSU didn’t come with a 4 pin just an 8 pin. Is that 4 pin for over clocking? I’ve heard some other folks say that it’s necessary for high speeds.
The additional 4-pin is only for extreme overclocking/power draw. The 8 pin alone at a minimum can provide 235W continuous power (and is rated for about 100W more in non-continuous draw). The 3950X only draws a max of about 150W at stock.
So, I currently have a b450 motherboard, but am thinking about changing to this. I also want to add in a NVMe drive for additional storage(also which slot would I put that in, assuming its not for a boot drive could I just use either of the 2). Would I have to reinstall windows even if I bring my old ssd along with it or can I just re do all the connections and have it work right out of the box with all my old parts?
If you pop your old SSD into the new machine it should still boot up and into WIndows, but you'll still have to reinstall a lot of drivers and put settings back. Additionally, your Windows 10 copy might need to be reactivated. I had to do all this when changing motherboards but keeping everything else the same.
Hi, I've just ordered this for my PC I plan on building next week! But I've got one problem, I only just now realized it has no io shield. Are you using it this way, and is/will this be a problem?
I have the same motherboard, and I just ordered 2 Corsair MP600 Gen4 PCIe 4.0 NVMe. I have never installed one before, should I just use both of the heat sinks that come with them or just the bottom one? Also, will I need to remove the GPU?
I would be inclined to just stick with the heatsinks the drives come with. That said I understand if you want the aesthetics of the heatsink the board came with. For the top spot you don't technically need to remove the GPU, but you probably will want to, to have more working space.
Gigabyte does the same thing even though the slots are labelled differently. The 2nd and 4th slot away from the CPU are the ones that should be installed first. It's really not intuitive and requires reading the manual.
You'll need to use the clear CMOS jumper. Either short the jumper turn the PC on and hold down the delete key, or short the jumper and remove the battery.
Bro I have a question... I have this same exact mobo but there is a flashing green light between the m.2 ssd with the heatsink and the motherboard fan when I am using my pc.. Do you have the same thing??
Hi, thanks for the run down I just bought a custom build computer using this board. Do you know if it's possible to change the wifi5 to a 6? Like if I was to plug my own AX into a pcie x1 slot
The top one (closest to the CPU) is designated as the M.2_1, and the one below the chipset is M.2_2. It's really more of just a designation though and doesn't seem to indicate any actual priority.
FaRKle0079 I would like to control the fan speed but it’s only a 3 pin. X2 GP12 fan. The fan CPU OPT is open and AIO is open, but I didn’t think you could connect to those just for the purpose of adding another exhaust fan.
@@CFHDime The AIO header always runs at 100% output, so you can't control with it. Your fans only have a 3-pin connector, so the only way to control them is via voltage controller (not PWM, which is what the 4th pin is for). I don't think the board does voltage fan control. If you can't control the fan speeds anyways, then I'd just use the AIO header for your 4th fan.
im getting this board do i have to intall drivers for wifi for the wifi to work or does it work out of the box and do you need to use the antenna for the wiffi also can you xmp on this
I believe Windows has some generic WiFi drivers so it should work out of the box, but it doesn't hurt the download the drivers in advance and put them on a USB stick. You should plug the antenna in for WiFi or the signal may be too low to be of any use. This board does support XMP, however it's not called DOCP since this is an AMD board.
Nice video help asap. I just build a new pc with only keeping the case and cs750m psu. I cant find that 4 pin cpu power cable. I have 5900x cpu on it do i need the extra 4 pin power for this cpu ? I dont see any signal on my screen
You shouldn't need the extra 4-pin CPU power for that CPU. The standard 8-pin alone should be fine. If you hear the single POST beep when powering up, then the motherboard is fine, and there's probably an issue with the GPU or how things are hooked up with it and the monitor.
I over clocked my ryzen 7 3700x and now i cant get it to downclock at idle.. Amd cool and quiet doesnt exist in my TUF X570 plus wifi board. I changed my power plan in windows to 5% minimum on the cpu but it still sits @ 4.3ghz even @ idle. Anyone have any ideas?
There's usually a sticker on the board with that info. I've seen them near the expansion slots, and also on the back of the board. You could always ask Asus too.
MechaSZN are you sure cause when I’m on pc part picker it shows as a compatibility issue that the power supply needs a 4 pin connecter to the mother board to power the cpu
Newer versions should since if you look on the BIOS updates support for the new CPUs is one of them. That said, I supposed it's possible to get an older rev board still that would need the BIOS update to support it.
The wifi should work as soon as you install the drivers for the wifi card. Once the drivers are installed the antenna will transmit/receive as soon as it's plugged onto the connectors.
@@FaRKle0079 ok thanks I am getting a customized prebuilt I'm hoping that they install bios can I somehow check if the bios are installed somewhere or should i to stay with the windows 10 drivers
@@k00l_aid_man96 A pre-built should already have the OS installed and at the least generic drivers installed for it to work right away. You'll probably want to make sure the latest drivers are installed though.
I am not a gamer. I like Editing videos . So I went with the Ryzen 7 and 16 gigs of RAM. So I will not be doing all this overclocking stuff that you guys talk about. Keith
@@NSDaishi The power requirements of the CPUs on this platform really don't require the extra 4-pin. Only under ridiculously high OCing (like beyond water cooling) you might need it.
@@FaRKle0079 i installed my m.2 in the second slot under the gpu. But it wont show up on my pc. Im using a WD Blue 1TB SATA SSD to boot. Do i have to plug another cable into the motherboard?
@@lxudgvming When you say doesn't show up, do you mean doesn't show up in My Computer, or doesn't even show up in Disk Management for partitioning? Does the drive show up in your BIOS/UEFI?
DO NOT BUY THIS MOTHERBOARD I HAVE IT AFTER 3 DAYS OF USE IT STOPPED WORKING I WENT TO SHUT DOWN MY PC THEN 15 MIN LATER I SAW WHEN I TURNED IT ON IT WAS JUST STAYING AT THE WHITE LED NOT GIVING POST I TRIED A NEW GPU RAM I TRIED EVERYTHING I SAW ON THE REDDIT FORUMS and also the motherboard over heats has audio issues and can kill your cpu do not buy this piece of a shit
THANK YOU for a clear and detailed view of the actual board and its features. It is amazing how difficult it is to find a channel that does this without a lot of nonsense.
I was confused about the 4-pin cpu power socket and couldn't find anything online that explained it. This vid was perfect, thank you.
Hahaha me too!
Thank you for this. I just bought this board and I'm going to be doing my first build in over a decade. This is exactly what I was looking for to make sure I place my 16gb of ram in the correct slots
Started with oh no not another run of the mill unboxing but then turned very informative.
You are right, me found it very useful 👍
Lol...dude you saved me, I'm bickering about wifi weak signal and didn't even know that it comes with antenna 😂😂😂....thanks alot mate
I just bought this board for a Ryzen 5 3600 build. I narrowed it down to this board or the Gigabyte X570 Aorus Elite ATX. It was decided on the basis of the PS/2 connector, since I have a number of brand new IBM Model M Compact Keyboards that I like to use. Have not yet built it . Got a Meshify C case for it.
Great video and you answered a lot of question I had for the board 💯💪
beautifully explained bro :), only this was i bought the Board and assembled it my self and i could have used a guide then :)
Thanks for the detailed guide, super helpful!
Help asap. I have just build a new pc with same mobo and 5900x i cant find a 4pin cpu power connector. No signal coming to the monitor. Do u need the 4pin to power up a 5900x ?
Had to send mine back. It would post, but not enter the bios. I guess there's a lot of failures with this mobo that the hardware on box channels won't talk about.
For the system pannels( buttons and lights) pins in 1:37 does the power and restart button wires go into there?
Yup, you're correct that's where the power/restart button wires plug into.
You're my hero.
Very informative! I appreciate it
Yes yes yes yes I need this video
Nice video and very helpful 😊
I can't find the USB-C port connector on the motherboard. please help!
Very helpful, thanks
How many fans does this motherboard support? And can i plug in a regular case fan into the AIO 4pin slot?
There are 3 case fan headers, but you can also put fans on the two CPU fan headers and AIO pump header.
This is great this is everything I wanted to know pretty much.
Dang I love the way you go over each thing in detail.
I got to get back to watching Rush that video now. Ohh
I almost forgot.
I have 5.1 surround sound speakers that I use for my computer.
I read something in the manual on that one that you're reviewing right there it says something about eight channels.
I'm not sure what eight channels is.
I just want to get my speakers and everything hooked up correctly so I was wondering if I will need another sound card for this motherboard to make my Logitech 5.1 surround speakers work properly?
Interested in seeing the build. Your putting a Ryzen 9 3900x? That's awesome!!
Yup. The 3900x renders my videos SO MUCH FASTER than what I had before. I'm loving it.
@@FaRKle0079
Hello I am curious I use Corel VSP EDITOR.
Which editor are you using I'm just curious.
I found a glitch that I discovered.
This is why I asked which editor you're using.
Thanks
Keith
@@KTHKUHNKK Nice bug finding! I've just been using simple PowerDirector (which has its own bugs).
@@FaRKle0079
I'm curious what type of bugs have you found in PowerDirector ?
Keith
Thanks. Still don't know which M2 slot to use for my boot drive, though.
Read a comment further down, and you answered this question. Guess I can add one under the heat sink later.
I have a few questions from reviews I've seen on this motherboard. Does your xmp/docp run normally and people say the LED lights stay on is there a way to disable that and also does it make you install armoury crate.
I had no issues running my G.Skill 64GB (4x16GB) 3600MHz kit using XMP/DOCP. I just set it and it ran fine.
You can absolutely disable the LEDs. If you don't want any LEDs at all, there's an option in the BIOS to set Aura to "Stealth Mode," which doesn't require an Armoury Crate installation. If you want LEDs when the computer is on, and them turned off when the computer is off, then you need to install Armoury Crate and set the shutdown behavior of the motherboard LEDs to off.
FaRKle0079 Ok thanks for the reply
Very very very helpful thank you
I'm planning to put a 3950X and 3090 in this board. I used PCpartpicker and it looks like everything is compatible. I just hope I don't need to flash the board. This will be my first build too, and probably last.
It's very unlikely you'd need to update the BIOS on the board to support that CPU. Great combo!
@@FaRKle0079 I hope so. Super excited. 😎
Bad they placed the Chipset right under the graphics card. Fan can't breath. My chipset is 80 degress!!
Thank you dear.
does the pro version have the same port locations? My x570 pro (wifi) doesn't have pins in the front panel USB 3.2 port. 1:28 and why did you say 2.1 but then wrote 2.0?
Very informative! I am currently waiting for my parts to arrive. I am going with a 3600 paired with a 2060s.
I have a question. I bought this motherboard on Newegg and the reviews aren't looking nice. They said that in order to install windows you have to disable the WiFi in the BIOS.
Did you do any of this? I am going to install windows via flash drive with media creation tool.
Congrats on the new build!
I had no issues installing Windows 10 from a flash drive without doing anything special in the BIOS (like disabling WiFi) or updating to the latest BIOS version.
The motherboard overheats and has audio issues do not buu this crap
@@falc0n2222 way way better msi's x570 mobo
Where on the motherboard would you be connecting the USB-C wire ?
There's no USB-C header on the motherboard, just a USB C port on the rear IO panel.
I have 4 fans and there are only 3 cha fan ports, Is there anything I can do to add a 4th fan? I do not have a aio, stock ryzen cpu cooler
how many fans can the motherboard hole because im going to install an aio cooler but I already have 5 fans plugged in
bought the ASUS TUF X570 Gaming Plus (WIFI) last year NeweGg never been able to register the product with Asus . error trying to register Asus Motherboart keeps telling me incorrect serial number . also look the bios page this motherboard 2 yrs about 25+ bios updates try to fix one problem and get another problem to replace it
Very helpful
How can I see were all the fan headers are
Where would you insert a AE-9 soundblaster sound card on this?
You can put that in any of the PCI-E slots. Short cards work in long slots no problem.
I put an otter g sound card in my motherboard as well.
It works fine PCIE
I just got a new psu and the 4pin connector was confusing to me, for the opposite reason of other's. This is my first psu that did not have it for some reason.
nice video! If you occupy the two M2 ports you lose any SATA ports?
The M.2 slots don't make you lose any SATA ports.
You mentioned that you don’t need the 4 pin CPU power, just the 8 pin. My PSU didn’t come with a 4 pin just an 8 pin. Is that 4 pin for over clocking? I’ve heard some other folks say that it’s necessary for high speeds.
The additional 4-pin is only for extreme overclocking/power draw. The 8 pin alone at a minimum can provide 235W continuous power (and is rated for about 100W more in non-continuous draw). The 3950X only draws a max of about 150W at stock.
this is a little bigger than an average atx and i cant find a case that will fit it im looking at a be quiet! pure base 600
So, I currently have a b450 motherboard, but am thinking about changing to this. I also want to add in a NVMe drive for additional storage(also which slot would I put that in, assuming its not for a boot drive could I just use either of the 2). Would I have to reinstall windows even if I bring my old ssd along with it or can I just re do all the connections and have it work right out of the box with all my old parts?
If you pop your old SSD into the new machine it should still boot up and into WIndows, but you'll still have to reinstall a lot of drivers and put settings back. Additionally, your Windows 10 copy might need to be reactivated. I had to do all this when changing motherboards but keeping everything else the same.
Hi, I've just ordered this for my PC I plan on building next week! But I've got one problem, I only just now realized it has no io shield. Are you using it this way, and is/will this be a problem?
I used the IO shield with mine. It's not a total deal breaker to run without it. You can pick up a new IO shield on eBay pretty cheaply.
I have the same motherboard, and I just ordered 2 Corsair MP600 Gen4 PCIe 4.0 NVMe. I have never installed one before, should I just use both of the heat sinks that come with them or just the bottom one? Also, will I need to remove the GPU?
I would be inclined to just stick with the heatsinks the drives come with. That said I understand if you want the aesthetics of the heatsink the board came with.
For the top spot you don't technically need to remove the GPU, but you probably will want to, to have more working space.
is there only one Slot for NVME SSD ? I thought about putting a 2TB Gen 3 for Windows and a Gen 4 later in the future
There are two M.2 slots that can each take NVMe drives.
How many 4 pins connectors are there?
Is it just me, or did Asus reverse the install order for the RAM? The first slot it usually the clostest one to the CPU.
Gigabyte does the same thing even though the slots are labelled differently. The 2nd and 4th slot away from the CPU are the ones that should be installed first. It's really not intuitive and requires reading the manual.
How would you reset this type of motherboard? Is there a button or do I have to short it?
You'll need to use the clear CMOS jumper. Either short the jumper turn the PC on and hold down the delete key, or short the jumper and remove the battery.
Thx!
Where do I put the HD audio cable on the motherboard as I've had a look everywhere and can't find it any help would be really helpful thanks guys 👍
The front panel/HD audio pins can be seen at 5:42.
I'm having a hard to looking for info if an RTX 3080 ti evga fits on this motherboard?
I don't know why it wouldn't fit. The PCI-E x16 slots are spaced to handle triple slot cards.
Bro I have a question... I have this same exact mobo but there is a flashing green light between the m.2 ssd with the heatsink and the motherboard fan when I am using my pc.. Do you have the same thing??
Unfortunately I'm not sure what you're referring to. I actually don't have this board anymore (I needed something with more PCI-E lanes).
Hi, thanks for the run down
I just bought a custom build computer using this board. Do you know if it's possible to change the wifi5 to a 6? Like if I was to plug my own AX into a pcie x1 slot
If you get a different WiFi card and plug it into a PCI-E slot you should be able to gain Wifi 6 that way.
@@FaRKle0079 Awesome, thanks
Will there be issues if I install the os on an n.vme ssd on the second m.2 slot with the heatsink?
Nope, shouldn't be any issues putting an NVME SSD in the second slot.
I really dont like the integrated bluetooth
There is a way tu uograde it for my ps4 controller?
You can probably get a better one that goes to one of the PCI-E slots. I'm surprised the stock one isn't working well for you.
Can you plug a case fan into the pump or extra cpu fan header?
Yes you can!
2:12 i got a rtx 3070 should i put it there or the one on top
Put it in the top most slot. It has the most bandwidth.
Which M.2 slot is the primary? The one up top or at the bottom?
The top one (closest to the CPU) is designated as the M.2_1, and the one below the chipset is M.2_2. It's really more of just a designation though and doesn't seem to indicate any actual priority.
It Will be fine with a Ryzen 5 5600x if i only put 2 cpu power clips? (The mother have 3 sockets for cpu energy )
You only need to connect 8 of the 12 EATX CPU power pins.
Where does the hdled plug go..and the sw one?
If you go to 4:01 in the video they connect to some of the group of pins just below the circled SATA ports.
What would you recommend for adding a 4th CHA fan? I have this board and it only has 3 CHA fan connectors.
Are you using the Asus software to control fan speeds? Do you have all the CPU fan headers and AIO header filled?
FaRKle0079 I would like to control the fan speed but it’s only a 3 pin. X2 GP12 fan. The fan CPU OPT is open and AIO is open, but I didn’t think you could connect to those just for the purpose of adding another exhaust fan.
@@CFHDime The AIO header always runs at 100% output, so you can't control with it.
Your fans only have a 3-pin connector, so the only way to control them is via voltage controller (not PWM, which is what the 4th pin is for). I don't think the board does voltage fan control. If you can't control the fan speeds anyways, then I'd just use the AIO header for your 4th fan.
im getting this board do i have to intall drivers for wifi for the wifi to work or does it work out of the box and do you need to use the antenna for the wiffi also can you xmp on this
I believe Windows has some generic WiFi drivers so it should work out of the box, but it doesn't hurt the download the drivers in advance and put them on a USB stick.
You should plug the antenna in for WiFi or the signal may be too low to be of any use.
This board does support XMP, however it's not called DOCP since this is an AMD board.
FaRKle0079 ok thanks man
Do you need to update the bios and if so where would you plug in the USB stick ?
You can plug the USB stick with new BIOS file into any of the USB ports if using the UEFI EZ Flash utility.
@@FaRKle0079 just got this board, would I still need a USB to install new bios? 5609x and same motherboard
Nice video help asap. I just build a new pc with only keeping the case and cs750m psu. I cant find that 4 pin cpu power cable. I have 5900x cpu on it do i need the extra 4 pin power for this cpu ? I dont see any signal on my screen
You shouldn't need the extra 4-pin CPU power for that CPU. The standard 8-pin alone should be fine.
If you hear the single POST beep when powering up, then the motherboard is fine, and there's probably an issue with the GPU or how things are hooked up with it and the monitor.
I over clocked my ryzen 7 3700x and now i cant get it to downclock at
idle.. Amd cool and quiet doesnt exist in my TUF X570 plus wifi board.
I changed my power plan in windows to 5% minimum on the cpu but it
still sits @ 4.3ghz even @ idle. Anyone have any ideas?
Did you by chance change the CPU Core Ratio setting at all? I had your same problem once, and I think it was because I had changed that.
Where can i find the serial number and such for warranty purposes on my mobo?
There's usually a sticker on the board with that info. I've seen them near the expansion slots, and also on the back of the board. You could always ask Asus too.
Do you need to use the driver disc or can you just download it online?
You can just download the drivers online. No need to use the disc. You can also download them ahead of time and put them on a USB stick.
Thanks for the reply the motherboard just came today waiting on the cpu and gpu now super excited to build my first pc
@@LilxMacL Oh awesome! Good luck with your build!
I have a corsair 570x and the 3 front fans it comes with have 3 3pin wires but I don't know where to connect them on this mobo (first time pc builder)
You can connect those to the 4-pin fan headers on the board (it'll just take up 3-pins). There are enough headers on this board for three fans.
What’s a good power supply for this motherboard
Get a Corsair PSU.
MechaSZN are you sure cause when I’m on pc part picker it shows as a compatibility issue that the power supply needs a 4 pin connecter to the mother board to power the cpu
Tv Gaming_YT you won’t need a 4 pin cable. 8 pin is enough for any cpu overclocking. But shouldn’t really matter
Nasser AlQinai thanks so much thanks 😊
Tv Gaming_YT np 😊
can you connecy a xbox controler to this board
I don't see why not since that's just USB.
Does this motherboard support Ryzen 7 5800x out of the box?
Newer versions should since if you look on the BIOS updates support for the new CPUs is one of them. That said, I supposed it's possible to get an older rev board still that would need the BIOS update to support it.
@@FaRKle0079 thank you
Does the antena work instantly or do I have to install bios first
The wifi should work as soon as you install the drivers for the wifi card. Once the drivers are installed the antenna will transmit/receive as soon as it's plugged onto the connectors.
@@FaRKle0079 ok thanks I am getting a customized prebuilt I'm hoping that they install bios can I somehow check if the bios are installed somewhere or should i to stay with the windows 10 drivers
@@k00l_aid_man96 A pre-built should already have the OS installed and at the least generic drivers installed for it to work right away. You'll probably want to make sure the latest drivers are installed though.
@@FaRKle0079 ok so I have to check on the files for the drivers and if they aren't new ones I should just reinstall new ones
Would this fit in an NZXT 510 case
Yes, since the H510 fits ATX size mobos.
I am not a gamer.
I like Editing videos .
So I went with the
Ryzen 7 and 16 gigs of RAM.
So I will not be doing all this overclocking stuff that you guys talk about.
Keith
how do you use the 4-pin EATX 12V_2?
If your PSU doesn't have a plug for it, you don't use it. It's really not needed.
@@FaRKle0079 hmmm..i guess that makes sense
@@NSDaishi The power requirements of the CPUs on this platform really don't require the extra 4-pin. Only under ridiculously high OCing (like beyond water cooling) you might need it.
So this comes with a WiFi card
Yes, it does. They also make a non-integrated wi-fi version.
It has no USB type C port on the board
You can see the USB-C port at 6:15 in the video.
@@FaRKle0079 lmao on the actual motherboard, there is nowhere to put in the cord that powers the USB c
Is the USB Type C ??
You can see there's USB-C on the rear panel at 5:52.
Can you move the second m.2 heatsinks to the first m.2?
Unfortunately not.
is using the second m.2 bad? i really want to but idk if it will affect performance
@@DJLESGO Use whichever you want and be happy! You shouldn't see a performance difference.
@@FaRKle0079 i installed my m.2 in the second slot under the gpu. But it wont show up on my pc. Im using a WD Blue 1TB SATA SSD to boot. Do i have to plug another cable into the motherboard?
@@lxudgvming When you say doesn't show up, do you mean doesn't show up in My Computer, or doesn't even show up in Disk Management for partitioning? Does the drive show up in your BIOS/UEFI?
Can i put a ryzen 5 3600
Yes.
It has no dp port which I need for my monitor 😔😔
It has DP and HDMI.
Your GPU will have a DP port.
6:24 it does
Is their any 5v 3 pin rgb headers?
There aren't any 3-pin headers, but there are two 4-pin RGB headers, one by the DRAM slots and another by the case front panel header.
Ah ok, I guess the amazon review was misleading, thanks
Your 4 pin advice is wrong
;))))
DO NOT BUY THIS MOTHERBOARD I HAVE IT AFTER 3 DAYS OF USE IT STOPPED WORKING I WENT TO SHUT DOWN MY PC THEN 15 MIN LATER I SAW WHEN I TURNED IT ON IT WAS JUST STAYING AT THE WHITE LED NOT GIVING POST I TRIED A NEW GPU RAM I TRIED EVERYTHING I SAW ON THE REDDIT FORUMS and also the motherboard over heats has audio issues and can kill your cpu do not buy this piece of a shit
too late, getting here today 😔
real editing noob I haven’t had any issues with mine.
James Cargius same, I think it’s great
I think you just got a runt of the litter, bad board. A regular 1 is terrific
Rangyr Wilson you’re probably right. But I hate that the gpu blocks the cooler.